CD, get to 99% and will not finish burn
original title: Cd burning
I can not burn CD more. It gets to 99% complete then I get the message error meesage: Windows Media Player has encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged. What should I do?
I can not burn CD more. It gets to 99% complete then I get the message error meesage: Windows Media Player has encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged. What should I do?
=============================================
It is possible that you have a hardware problem with your burner
But first, you might want to try using a different software:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)
DeepBurner Free
http://www.DeepBurner.com/index.php?r=download
(Windows XP/Vista/7)
The following links may be worth a visit:
How to burn CD/DVD with Deep Burner
http://www.ehow.com/how_4494548_burn-CDDVD-deep-burner.html
Deep Burner free - create a Real Audio file Audio MP3 CD
http://www.YouTube.com/watch?v=CqpjCQNHdVs
Tags: Windows
Similar Questions
-
Adobe Flash Player Installer gets stuck "downloading" and will not move forward
I'm on Mac OSX 10.10.1, using as Safari and Chrome browsers. I've recently upgraded to Yosemite since then, received error messages that I don't have Flash installed. When I download the installer, it gets stuck and will not exceed 30% of "" downloaded. I left for hours, and it's still at 30 when I get back. Is there a permissions issue that I could play with to allow him to continue the installation? Suggestions for what to try to get this installed?
I was able to download the installation program itself, but the problem is after I double-click on "Install Adobe Flash Player." See screenshot below.
This is where it gets stuck:
Use Setup offline http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
-
my windows defender, is arrested in C:\Windows\Home Premium.xml at the tripping and won't go any further on the scan, what's the problem? It also stops at C:\Windows\unind.exe,what of wrong with her? He did this for about a month now and I had to close my computer, restart it and try and restart windows Defender, and it always stops at a file any
Hello
This tool of troubleshooting for Windows 7 - Vista is similar - to use XP RUN instead of start - search.
Two possibilities include disk and malware problems.
Disk problems can take seriously very quickly so I carefully check the disc now and do not forget
to keep redundant backups of your important data (use several methods).Inside the Windows - Regular or Safe Mode (repeatedly press F8 as you start).
Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.htmlGOLD:
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html----------------------------------------------------
For even better and more efficient to check:<- advanced="">->
At the Recovery Console prompt (if you have one) or a Vista/Windows
disc 7 - If you do not have a Vista/Windows 7 disk you can borrow a friend (it must be the same
32 or 64 bits and they are not protected against copying) or make a. Also your system manufacturer will sell the
physical disks cheap since you already own windows.Chkdsk /f /r
RESET
After k and before space / f and before.
sfc/scannow
RESET
Space after c and before.
How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7----------------------------------------------------------------
Go to settings/settings F2 (BIOS/CMOS) often as you start so watch the screen as you start. Define the
Start the command of CD/DVD disks of Windows (Vista or Windows 7 If you have installed.)
Be sure to set in when.If you need to repair disks - these help repair Windows not re-install.
Download Windows 7 system recovery discs - charge now $9.75 for ISO
images to make the discs.
http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/How to create a Windows 7 - free system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html=====================================
If CheckDisk is unable to fill as above:<-- manufacturer's="" diagnostic="">-->
(The old 302602 links isn't now valid for Diagnostics links).
Manufacturer diagnostic utilities - run one to your hard drive
http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.htmlCorrected list dated 06/09/2010
Fujitsu hard drives: utility of diagnosis here
http://www.Fujitsu.com/EMEA/products/HDD/Hitachi hard drives: utility of diagnosis here
http://www.HitachiGST.com/support/downloads/IBM hard drives: use Hitachi utility *.
Toshiba hard drives: use Hitachi or Maxtor utilities
Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
http://www.Seagate.com/www/en-us/support/Quantum hard drives: use the Maxtor utilities
Seagate hard drives: here Diagnostic utilities
http://www.Seagate.com/www/en-us/support/downloadsConner hard drives: use the Seagate utilities
Hard drives Samsung: utility of diagnosis here
http://www.Samsung.com/global/business/HDD/Hard drives Western Digital: utility of diagnosis here
http://support.wdc.com/product/download.asp?lang=en
Trial versions of one of these 'might' help.SpeedFan
http://www.almico.com/sfdownload.phpHD Tune
http://www.hdtune.com/I hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
How is it my library of photos guard update and will not be finished
How is it my library of photos guard update and will not simply end. Every day or two again. I'm so frustrated.
Because you have a problem, you need to fix - if you want to fix it need give us more than a problem abstract - you should know what you have and what help is happing\
This article gives the help of writing, a question Manager wrote an effective communities of Apple Support question
What operating system and version of Photos you have? Where are located library and if a disk external hard what format is it and how is it connected? Which exact error message do you get? What has changed since it worked
LN
-
My IPad 2 Air is mad, he gets on its own, and it freezes. Not to mention it locks me. Didn't this iPad for 2 days. Have not been able to use it! I tried connecting to ITunes and will not work!
Hi Kareyfabela,
For this kind of problem, I strongly recommended opening a pension with Apple iPad case will probably require inspection by an Apple engineer. You can open a file on this site: https://www.apple.com/support/contact/
I hope this helps!
Jonty
-
I had a paper get stuck in my printer 1310 series. I disabled the jam but it is still showing as a paper jam and will not display 6 documents in the queue
If it still shows paper jam and you know that there is no paper, just turn it works, and it should realize that there is no paper.
-
* Original title: Microsoft kb3134214
The update of Microsoft Windows KB3134214 file is suspended and will not be, nor finish the rest downloads to install. I downloaded the updated individual security file. I'll wait to install pending a possible resolution here. If anyone has experienced this problem and has a resolution, I would be grateful to receive information and repair.
Hi Nathalie,.
Thanks for the reply and the link to the article. I appreciate it. While I was not having trouble to download updates, it was one of the update of the files froze during installation. I had gel resulting set before your answer.
I'm not sure what I did to fix it, but the installed annoying file itself. Here are the steps I took to learn that annoying file has been installed:
"I restarted my computer.
"then stop it showed that he was trying to install the file again
"I hit the reset button on my machine.
"My machine is restarted, I received the message that my machine was not correctly stop and choose Safe mode or start normally.
"I chose boot normally.
"Somewhere during the start-up, something installed or flashed a message
"My system automatically restarted by itself.
"On my screen, my computer displays a message saying it was set up my system.
'My computer restarted again
"Back to my login screen, I had a repeat of the previous message from my computer's configuration.
"After that over, I arrived at my office
"I've manually run Windows Update
"After Windows Update, I checked the files available, disabled the original file in question and click the button install.
"These files correctly installed and gave a message requesting to restart."
"I rebooted my system manually.
"Back in my office, I manually tried to install the file in question.
"It gave me a message that it was already installed.
How he installed himself is a mystery. Other than on the first attempt to update my machine, it has NEVER included in my another attempt to update. Anyway, my machine is purring along as if nothing had happened.
You can mark my question.
Thanks for your help,
Robert
-
My installer of windows 7 is corrupted and will not install office 2007, I tried the suggested fixes but still error 2 in windows install when I hit start
How can I get this problem... Thank you
Well, I don't know what patches you have tried.
Troubleshoot Windows install
2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer
http://support.Microsoft.com/kb/2438651
Substitute:
Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:
1. in the menu 'Start', click on ' execute:.»
2. in the "Open" box, type "msiexec /unreg", and then press ENTER.
3. in the menu 'Start', click 'run '.
4. in the "Open" box, type "msiexec/regserver", and then press ENTER.
or
Click Start Orb, in the box, type search: Regedit.
Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver
Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.
Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.
Also:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
-
I am trying to install CS5 on my iMac, after my computer crashed. I get a message saying that the software is already installed and will not install again. How can I install it again?
Hi Marleneb3511919,
I'm sorry for the inconvenience caused to you.
I guess you tried rebooting your system? If so, and the problem persists please try the steps listed in this document https://discussions.apple.com/thread/240851?start=0&tstart=0
Please let us know if this goes through.
Kind regards
Aurélie hamadi
-
Hello, I have a new mac, I need help in installing adobe photoshop cs6, I need to install and to pay the tax. But I've been trying and don't get days, I got 30 days version and will not let me buy it. I need it to work. Please
Hi the isac,
You can download Photoshop CS6 from this link: download Creative Suite 6 applications
You can buy the product from this link: Creative Suite 6
Kind regards
Claes
-
I went to Adobe Creative cloud to install Bridge. I pressed the button download next to the bridge and my creative cloud now says "update installation...". "but the sequence is at 0% and will not get above. Please help me thank you all
Hello
Please quit Setup and then exit the creative application of cloud.
After that, restart the machine.
Let us know if that helps.
Kind regards
Bani
-
Flash Player pop up box "requesting permission to store information on my computer" does not and will not disappear. How can I get rid of him. It is most annoying that there is in the middle of the screen.
Move the cursor over the video. Right-click. Click on settings, click on the box "don't ask again". And then click Close. This will work.
For some reason, always worked for me, but in the last two days, it does not work, and it seems to freeze on the
video. See if it works for you.
-
I had this problem before on sites Web of VA. How Firefox can not trust a site from the U.S. Government? It indicates that the connection is not approved and will not let me continue. How can I make Firefox let me continue?
This page opens another page in a frame.
In such a case, you cannot make an exception.This server does not send a certificate chain that ends with a built-in root certificate.
You can open this page in a tab to make it possible to create an exception if you really need access to the site.
Note that storing a permanent exception should not be.Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:
- chrome://pippki/content/exceptionDialog.XUL
In the field location type and paste the URL of the Web site
- retrieve the certificate via the button 'Get certificate '.
- inspect the certificate via the "view..." button. »
-
Had cracked screen but the phone works still. Today screen is become white, and the phone rang again. Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed
He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.
-
This has just begun. When I close firefox it tells me that I am closing multiple tabs. and will not let me save them. the only option is to cancel or OK. When I say OK and restart Firefox all my tabs go :-( This happens every time now. I know how to recover my old tabs but whenever I close Firefox it always warns me that I'm closing multiple tabs.
Tanks for help getting Firefox working properly again
JimDo not use 'Clear history of Firefox closing' to clear the 'browsing history '.
- Tools > Options > Privacy: history: [X] clear history of Firefox closing > settings
- https://support.Mozilla.org/KB/clear+recent+history
Using the "Show my windows and tabs from last time" is a more reliable way to restore the session data.
- Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.
Maybe you are looking for
-
How see you captured by the app Apple Watch Workout training? app
When you complete a workout using the Apple Watch of training application, it asks if you want to 'Save' the workout. How you look at these recorded training? Most applications provide a way to see at least the last few workouts, for example, distan
-
With the help of Dragon dictate the forums unless I use either half of voice features are lost (such as the ability to fix!).It is not a big deal to click one of the options, but I'm curious to know what compromise of performance can be AND security.
-
How do I recover pictures after they have been removed from film * and * icloud
Hey there A few hours ago, I needed some space to take pictures during a show, so I deleted pictures in my camera roll which was taken 10 days ago and were supposed to be on my cloud. (-> After I took them I connected my phone to my mac and imported
-
HP Office Jet 6000 E609n Red &; Blue lites flashing after installing new trolleys
The subject little line about everything said. After you have installed 3 new ink carts (made many times before) the ink Light Magenta and Cyan continue to Flash. After printing a 'HP Deskjet general purpose Test-Print Page assessment', all 4 squar
-
hotmail message gets stored in drafts before filling
While writing an email to typing slows down, and then a message pops up saying he went to the air currents, she take air currents and continue to write only for a short period is to say before it goes to air currents again! It happens on the compute