CDP support in TC4.2.0 for the C Series codecs

Similar Questions

• Non supported configuration of virtual machines for the fault tolerance. The operation is not supported on the object. When activating FT

  Hello

  I try to activate FT on a virtual machine that AFAIK ticked all the boxes for FT but I get this message when activating it. No clue as to what might happen or where to connect for extended information? This error message is too generic...

  Thanks in advance mates.

  Did you follow KB1019165-fault tolerant to fails to 42% with the error: not supported configuration of virtual machines for the fault tolerance

  André

• HP Support Assistant - telephone number incorrect for the Germany

  Let's not the phone number indicated in HP Support Assistant for the Germany. Under the button 'Contact support' location Germany selected, 'call HP"indicates phone number 01805 65 21 80. This phone number no longer in service.

  The right phone numbers are on http://www8.hp.com/de/de/contact-hp/phone-assist.html and in my case, it would be + 49 69 2999 3434 for support for portable computers.

  I used the Feedback button in the HP Support Assistant to report the problem on the wrong telephone number.

  HP Support Assistant version: 7.0.39.15

  Configuration file version: 7.0.2395.1100

  Mike

  The about button / check for the latest version on HP Support Assistant version: 7.0.39.15 (running on the laptop of HP ENVY 15 TS) came back with the result that the latest version is already installed. I noticed that on the page of the driver for my laptop, this 7.3.35.20 Version sp62291.exe is available. Once I had downloaded and installed this new version, support for the Germany phone numbers appear correctly.
  
  Mike

• Video memory for the A50 series

  Hello.

  I have a satellite a50-111 and I wonder if it is possible to change the amount of video memory to the maximum value possible.

  Below you will find the form reported video memory Panel - graphics:
  -----------------------------
  Minimum graphics memory: 15 MB
  Maximum graphics memory: 64 MB
  Used graphics memory: 18 MB
  -----------------------------

  I have 1 GB of RAM, and I wouldn't mind if the video card supports 64 MB of him all the time.

  Thank you.

  Hello
  Your machine has 16-64 MB shared memory with the system. This memory cannot be set to a specific amount, but is controlled at the level of software/hardware for maximum performance
  concerning

  Gandalfwhite

• Restriction of firmware for the HX Series

  Hello

  HX Series release notes describe the latest version of the firmware shipping below.

  https://download.Lenovo.com/servers_pdf/lenovo_converged_hx_series_release_notes.PDF

  Available hardware implement uEFI 1.1 (TCE106KUS) and 1.72 IMM2 (TCOO10H).

  Can update us the firmware to the latest version? or do we have no restrictions to HX Series? (lik stay level firmware to AVS/Foundation combination)?

  May 2016, uEFI last 2.01 (TCE122W) and 2.50 IMM2 (TCOO16P) are released.

  Release notes, "you must pass the Nutanix OUR version 4.5.2.3 or later in order to enjoy some patches critics." are described. If we ugrade latest uEFI/IMM2, do we need to update OUR Nutanix first, then updated the firmware?

  Because the previous note of support (to Fib 2016) had a similar description, but OUR Nutanix version isn't 4.5.2.3 4.5.2. So I want to know any restrictions (or relationship) for the system and update of uEFI/IMM2 firmware.

  Thank you.

  Hi, Mike.

  Thank you youre replay and ok I understand.

  We should update OUR 4.5.2 or later to the beginning and after that, we are able to update version uEFI/IMM2 version shipping factory at latest. There is no dependency on a specific version of OUR.

• Install the HP software for the 5500 series all-in-one Macintosh

  I reinstalled the software all-in-one HP 5500 on Mac OS 10.6 running, and now I can't print.   I uninstalled the software from the CD and re-installed but not luck.

  The printer was working before, but I have reinstalled the software because the ferry did not work when scanning documents.

  When I try to print nothing happens and when I go to print queue shows the document and status is listed as "error" with no further details.

  I can print a test page.  When I try to scan (from the all-in-one), I can see the scan on my screen but cannot open the document (pdf) and it is said that something is wrong with the scanned document and that some software is missing for the printer.

  Download and install this: support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Distance of the compatibility of MXP for the EX series

  HY guys,.

  I would like to ask something about the compatibility of the remote in the 1700 MXP for Ex90.

  can be used TRC4 distance EX 90? because I got the replacement of equipment for MXP1700 with EX90, but there is no touch screen remote control for EX pack.

  Thank you & Gbu,

  Better subject.

  Nanda

  Hi, thanks for the thanks.

  I had a 1700 at some point as well. If you liked that, you'll love the EX90! :-)

  Especially with the touchpad, you won't miss the remote anymore, but at least for now he

  could be a workaround, please check that you use TC6, I think TC4/5 might not work with the remote control.

  Be sure to check the documentation:

  http://www.Cisco.com/en/us/products/ps11327/products_user_guide_list.html

  Nanda, if you can evaluate the responses we made (using the stars below each assignment), and then assign the thred responded if it is.

  How to: useful frequency responses and identify useful or correct answers.

• Is there a docking station for the Qosmio series?

  I would definitely buy a docking station for the Qosmio (I bought the F10 but not yet received). Does one exist? I suspect that the answer is no, because I couldn't find anything on the site, but maybe someone knows for sure...

  Hello

  Laptops Qosmio not usable with port replicator. As already said kypros only external USB docking station can be used.

  Good bye

• bought the subscription of season for the tv series, but the episode is not available

  is there a time limit for the new episodes when the season is purchased - the most recent episode aired on 3/16 Wednesday, but is not available in my shopping list, even if it is available for sale separately?

  Yes, sometimes there may be a delay, how long did you wait.

• Should I buy the hard drive removable 750Go for the Y500 series laptop?

  I know that it includes a hard disk of 1 TB inside the laptop

  but you think that it is necessary to buy a?

  OK the y500 series have the Bay ltration that allow to use the removable hard disk, graphics etc.
  I mean that play games (not many) games maybe 2 or 3
  Record a movie in the drive about 250 to 270 GB
  Don't forget the y500 I already have 1 to inside
  The removable hard drive was a 720 GB external drive which can use for ultra Bay

• error-"we're sorry, but your operating system is not supported by Microsoft Fix it for the moment." after performing a system restore

  My computer became unusable, so I had to do a system restore so that it can work.  (I tried everytheng else I could think before going to this option.

  Now, all my earlier updates downloaded, (including the "Service Pack 3,"Microsoft Fix It' amd "Microsoft Security Esentials", are not updated my disposal with this computer.

  In addition, I am able to complete (NO) downloads of microsoft to solve these problems, as evidenced by the message "title", ""we're sorry, but your operating system is not supported by Microsoft Fix it right now. " "

  What can I do to fix this problem?

  Hello

  1. what exactly is the problem?

  I suggest you follow the steps in this link and cancel the system restore:

  http://support.Microsoft.com/kb/306084

  provide us with more information about the issue so that we can better help you.

  Check if that helps.

• Host for the satellite series unit

  Is there a reception unit (I understand, they are also known as the Port replicators) for my laptop Satellite 1900?

  Meier

  You can use the Port Replicator Port USB 2. This unit works on a USB Port of your computer and gives you a lot of other interfaces, such as 4 x USB, Printer Port, Serial Port, PS/2 for mouse and keyboard

  Good bye

• On the "Image Enhancement Utility" software for the Qosmio series

  Hey all,.
  As you may know, the utility of photo development is responsible to define the image quality in 3 software: Windows Media Center, WinDVD & WinDVR.

  It gives more bright colors, a picture more clear and other improvements in the display mode full screen.

  I was wondering if it is possible to have the image Enhancement Utility affect the image quality of other software such as Windows Media Player, Zoom Player, Media Player Classic or other players.

  When I got my Qosmio, I didn't expect the Qosmio announced engine (which is controlled by the image Enhancement Utility) to be only compatible with the 3 predefined software!

  I think it would be great if Toshiba could specify the software for which we want strengthening of motor Qosmio image, as an option in the "Picture Enhancement Utility.

  I really hope that Toshiba will hear the appeal in the wild. ;)
  Next time!

  Alcahest

  Hello

  As far as I know this utility allows you to change the image quality depending on your viewing environment and also allows you to select external input parameters for video camera, games consoles etc. That s right it works with Media Center, InterVideo WinDVD and InterVideo WinDVR because these programs are pre-installed on the device. In my opinion, the development of photo utility is a very nice utility and as far as I know inimitable.
  You cannot expect that this utility must works with all kinds of programs, but maybe the next version has a few extensions ;)

  Best regards

• Equium A200-1V0 - need advice for the new series of laptop

  I want to replace my Equium A200-1V0.
  I don't know not in range it originally was - base or more?

  What would be a good replacement for it now?
  What I use my current for internet, email, Word/Excel and simple games. I also use it to listen to the music and the iplayer.
  HD, also used to store photos and iTunes.

  I have a budget of about £300-£400
  Minimum specification of:
  Memory - 2 GB
  HD - 200 GB
  Intel processor - NOT a Celeron - duo or preference i3
  stereo speakers
  at least 2 USB ports
  HDMI port - optional
  Screen 15 ''

  Thanks in advance...

  Hey,.

  There are several laptops Toshiba with 15 screen I think that the important point is the price because other requirements such as 2 GB RAM, 200 GB, etc are no problem. Most laptop have 4GB or more of RAM and also tough with more disk space.
  Moreover the Intel Core i3 processor is standard CPU at the moment, some models have a Core i5

  Take a look at Satellite C650, L650 and L750. These models are to fundamental factors such as Internet, music, videos and simple games.

  You can compare all models on the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/family/

• How can I fix error for the movie maker codecs/message?

  I get an error oxc946001e @ Director on a downloaded video clip. I can see the video fine on cyberlink... The extension on my clip is VOB... How can I fix?

  I can only imagine that you are using Vista Movie Maker 6?

  VOB is a file copied from a DVD-video... He will probably need
  to convert to WMV prior to that will work in Movie Maker.

  One thing you might try is to rename the file from. VOB. MI/GAL.

  If it works... do dragging to the timeline and immediately publish (Save)
  in the. Format WMV or DV - AVI to a folder on your hard drive, then
  Re-import the file converted for editing.

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg