CDROM image attach and VM turn the Script using Onyx

Similar Questions

• My only intention is to create a model/site based URM where we can provide functionality to scan for users. We want a distributed feature where users can scan the images remotely and commit to the WCC:Records / URM. Is it possible to be thr

  My only intention is to create a model/site based URM where we can provide functionality to scan for users. We want a distributed feature where users can scan the images remotely and commit to the WCC:Records / URM.

  Is it possible to be done through Oracle distributed Document capture (ODDC) and if it is possible how to connect ODDC with the client browser. Please suggest

  Ok. So, the answer is certainly: Yes, it is possible.

  The part of analysis, this is exactly what ODDC is good for. Unless you have the license already, however, you may have to go with the product to Capture Oracle WebCenter (large companies), which provides the necessary also.

  Regarding the validation and storage, ODDC/ODC/WebCenter Capture can commit images scanned at several depots, including University Complutense of MADRID (URM can be considered a Complutense University of MADRID with a specific purpose / several modules or components under voltage and configured). So, technically, he has no problem.

  When I have little doubt, however, is the meaning of the scenario - declaring an item as a record is an important event in the life cycle of the document - a record is often (or always) cannot be changed to ensure the integrity and non-repudiation of information. In this perspective, a direct validation of a recording of a scanning system (where errors such as bad scans, lack of pages, etc can be expected, particularly if the scanning is performed by the end user in a distributed fashion - so, not very experienced) seems a little dangerous.

• just upgraded to ch 2014, when using contact sheets and by adjusting the results of font sizes in the spacing between the images bigger and bigger while the size of police remains the same. See you soon,.

  upgrade to ch 2014, when using contact sheets and by adjusting the results of FontSize to spacing between the images grows while the font remains the same size.

  Someone at - it ideas on why this is happening.

  See you soon,.

  PAul

  Hi Paul,.

  There is a bug in the script that affects text attributes. We are now studying.

  In the meantime, xbytor updated the plug contact to work around the problem. You can find it here: ContactSheetX 2.1 released

  Kind regards

  Steve

• Problems with 'Wait-mission' and 'CloneVM_Task' in the script of vm - backup.ps1

  Hey all,.

  I hope you can help me with something. An environment that I help standing needs a systematic clone (copy) large number of virtual machines from a data store to another for customer test scenarios.

  Not being is not a type of programmer, I found a script that looks like it fits the Bill here: http://www.mbnbusiness.co.uk/blog/2010/08/updated-powercli-vmware-vm-backup-script-v2-0/

  However, when I run the script, I have two errors that seem to keep me from moving.

  (1) the first issue seems to revolve around the wait-job command.

  Waiting-Task: cannot bind parameter 'task '. Cannot convert the 'work-task-425″ type value 'VMware.Vim.ManagedObjectReference' to type 'VMware.VimAutomation.Sdk.Types.V1.Task'. C:\vmbackup\vm-backup.ps1:275 tank: 34
  + Wait-Task < < < < $task
  + CategoryInfo: InvalidArgument: (:)) [waiting-Task], ParameterBindingException)
  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.ViCore.Cmdlets.Commands

  (2) the second issue is the creation of clones themselves. I see no error thrown in the PowerCLI console while the creation of clone, but I see errors indicating in vCenter:

  Clone the virtual machine

  VCE-bvm-30_sub

  Has specified parameter was not correct.  Home

  Any help you could provide would be most appreciated. I have attached the script, the input file and the error of console output.

  Thank you!

  Hi Aaron,

  (1) the problem here is that the variable $task contains an object of type ManagedObjectReference. It is essentially the task ID, while the Wait-job cmdlet waits for an object of type Task. What you need to get the object by its task ID and pass it to the Wait-job cmdlet. Put this befeore the line of the "Wait-Task $task" line: "$task = Get-job | "where {$_.id - eq $task}.

  (2) you do not specify a valid host in the $cloneSpec that you pass to the CloneVM_Task operation (' $vmView.CloneVM_Task ($cloneFolder, $cloneName, $cloneSpec) "). Set the it to the host where you want to place the cloned VM (by setting the property $cloneSpec.Location.Host). The host parameter can be set in certain situations, you need to decide based on the configuration you. Here is the description of the host of the VI QAnywhere parameter:

  The target host for the virtual machine. If not specified,

  • If the resource pool is not specified, current host is used.
  • If the resource pool is specified and the target pool represents a stand-alone host, the host is used.
  • If the resource pool is specified and the target pool represents a DRS cluster enabled, a host selected by DRS is used.
  • If the resource pool is specified and that the pool of the target represents an active without DRS cluster, an InvalidArgument exception thrown.

  I hope this helps.

  Kind regards

  -Angel

• I got the message "SIM failure" on my IPhone 5.  The first time, I turned the phone off and turned it back on and it started working again.  I got the same message today and by turning the phone then next turn did not eliminate it.

  message "SIM failure" of "no SIM".  1st time it happened I turned the phone off and turned it back on and it was OK.  It happened again, and this time cut off and back on does not the phone is working correctly.  Cannot make or receive calls.  Nothing has ever changed with my carrier.

  First get a replacement SIM from your operator. If this does not fix it you have a hardware problem.

• Find and replace in the script editor

  I wonder if there is anyway in the script editor to perform a search and replace?  I can do a find by pressing cmd + f then if I hit shift + tab, I can stick it to the highlighted area which is great for a couple, but when I have a bunch of stuff is a pain.  I want to just do a replace all in the editor.  I can cut and paste the script in the editor for this, but I hope there is a key combination which makes appear a replacement all the dialogues.

  Unfortunately there is no gimmicks to replace. It's just not there.

  Another feature request Paul!

  Christophe.

• Referencing files images, CSS, and Javascript from the system instead of workspace files repository

  Hello

  I am currently using Apex 4.2 and I want to know if you still have to import images, CSS and Javascript files, respectively, in a workspace (like the shared components) to use them in an Application? Alternatively, they could be referenced in a directory on the file system? I'm still not familiar with CSS or Javascript technology and I'm trying to find out as much as possible about how to use and where Apex can do. All comments gratefully received,

  Kind regards

  Kevin.

  Since you're using the EPG you will not be able to reference all files directly in your operating system.  You can load in XDB using FTP, WebDav or PL/SQL location.  The PL/SQL method is described in these posts:

  A random overview of Oracle: loading images in Oracle XDB

  Loading images custom when using EPG

  I don't know if there is any benefit from their download in XDB compared to the APEX workspace.  Guess it would make sense that you had a file that you wanted to be referenced by more than one workspace and do not want to download the file in each workspace.

• Windows Fax and Scan - what the appropriate use for the concurrent users to save to the network program?

  I'll try to keep this simple - as I already asked this on other forums without the answer. My environment - Windows 7 Enterprise SP1 32-bit client machines. A computer needs to scan patient documents to a network shared by a group of users folder. There will be many people who use this computer even through all day (several shifts - environment 24 hours/7 days).  This is why I need multiple profiles from windows to all save the scan to the SAME network location.

  Currently I am trying to achieve with Windows Fax and Scan and using the ' Scan 'option under 'tools' routing. "  There is a check box (once in this option) for "network location".  I am using this option, but its does not work and that's the whole problem. Its supposed to AUTOMATICALLY record each scan to the specified network location, but it does no such thing. The scan is not registered at all in fact it is just in the interface user of Windows Fax and Scan... double you click it, and then it shows you the image.

  Some information note for helping people answer this question (and any help is appreciated):

  (1) * YES * the network folder, I am trying to record is a valid network folder and * IS * accessible via my network of different devices

  (2) * YES * the user of this journal on the computer with the scanner * ALL * read/write to have rights to this location of the network folder

  (3) * file YES and printing sharing is already active on clients

  If you please if someone either knows how to solve this problem, or at this stage if you can even suggest a different (cheaper the better) application that will scan to a network location please let me know.

  One might think to a disabled feature labeled as "scan routing" and then a field for "network location", it would be simple as plugging in the network folder and checking a box - apparently it isn't.

  Thank you.

  Tom Salvtti

  Hi Tom,

  Thanks for posting your query on the Microsoft Community.

  I would like to know some information.

  1. You are connected to a domain network?

  If Yes, then I suggest you to post your query on TechNet Forums as we have experts working on such issues and help you to the best.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• ESXi 4.0 - trying to suspend a virtual machine with the script using the remote CLI

  Sorry if this is in the wrong forum; I can't find the specific forum ESXi 4.0.

  This is the script I tried to use to get my VM to suspend in ESXi 4.0 remotely using the remote CLI:

  "vmware - cmd.pl" - Server 192.168.5.6 - xxxx - xxxx password username "/ vmfs/volumes/datastore1/Helix/Helix.vmx" suspend soft

  This error message appears after you have clicked on enter:

  SOAP fault:

  -

  ---

  Error string: error. RestrictedVersion.summary

  Lack of details: RestrictedVersionFault

  Cannot perform the operation.

  SOAP fault:

  -

  ---

  Error string: error. RestrictedVersion.summary

  Lack of details: RestrictedVersionFault

  I just need to be able to suspend my VMs on ESXi 4.0 box remotely.  Any suggestions on how to get this to work?  I'm open to other ways...

  Take a look at this article for your answer: http://vmetc.com/2009/03/31/esxi-u4-ends-free-version-read-and-write-access-from-the-rcli/

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• Conditional mapping with the script using BlOCKPROC to access the HFM API

  Hello
  
  following problem. During the mapping/validation, I need to map some members custom1 to zero if the upper limb is None and whether, if any. This allowance depends on the account. By reading the documentation I stumbled upon conditional mapping.
  So in the Custom1 plan type for example I defined according to:
  
  Rule name: C1_Script
  The rule definition: CXXV. *
  TargetCustom1: #Script
  
  In the script, I try to achieve to get the Custom1 Top Member on behalf! The HFM API offers this function (fGetCustomTopMember) and with varValue (14) I get my TargetAccount. So, everything I need seems to be there.
  Only problem is that I have to use the BlOCKPROC to access the HFM API provided through the adapter, but either way will not work.
  Try 'Set API. IntBlockMgr.IntegrationMgr.PobjIntegrate = BlOCKPROC.ActConnect ("LookUP")"generates an error object required.
  To try
  Dim BLOCKPROC
  Set BLOCKPROC = CreateObject ("upsWBlockProcessorDM.clsBlockProcessor")
  BLOCKPROC. Initialize the API, SCRIPTENG
  throw me a mismatch of type for 'BLOCKPROC. Initialize. "
  
  I'm a little at my wits end. Any help/hint is appreciated.
  Ahh, yes the writing of different BlOCKPROC and BLOCKPROC is correct!
  
  Thank you!

  You must do this in the event script Bef/AftProcMap. Valient effort but mapping scripts do not support API calls you need to do. Move in the event and you will be fine. I did it several times.

• load via the script use

  Hello

  How can I charge a use (*.uri) via the script? Check the plug current if the plug-in is already loaded?

  Greetings,

  Martin

  Hi Martin

  The following will let you know what is the revision of a pluggin of data.

  The second function updates the plugin data upon request.

  Enjoy!

  Paul

  ' Gets the version of a use

  function GetDatapluginVersion (strDatapluginName)

  Dim oMyDataPlugin

  Set oMyDataPlugin = Navigator.Settings.RegisteredDataPlugins (strDatapluginName)

  GetDatapluginVersion = oMyDataPlugin.Version

  "Call the MsgBoxDisp (oMyDataPlugin.Version)."

  EndFunction

  Sub CheckUpdateAOP5

  Dim strAOP5CurrentVersion, strAOP5LatestVersion

  Dim MyVar

  protected path2AOP5: Path2AOP5 = 'Yours to fill. "

  strAOP5CurrentVersion = GetDatapluginVersion ("AOP5")

  strAOP5LatestVersion = "11.0.1f5081".

  If strAOP5CurrentVersion = strAOP5LatestVersion then

  ' msgbox ("AOP5 latest version:" & strAOP5LatestVersion & "is equivalent to" & strAOP5CurrentVersion)

  on the other

  MyVar = MsgBox ("AOP5 use requires an update now?", vbYesNo + vbQuestion, "DIAdem")

  Select if MyVar

  Case VbYes

  Call ExtProgram (Path2AOP5)

  Select end

  end if

  EndSub

• What is the best way to create a form on my page layout of Muse for an event where the person is able to register and pay for the event using Business Catalyst?

  I need to create a Web site for a conference and I need to be able to have participants at the same time register you for the event on the website, but also paid for the event.  What is the best way to do it?  I am brand new to Business Catalyst and of course the customer must site upward and yesterday running.  So, if I could find quick assistance to implement it quickly, I would be very happy!

  Thank you!

  Hello

  Please take a look at these tutorials,

  Customizations made for the events module

  Let the site visitors sign up for an event

  Once configured, you can add modules in Muse and publish business catalyst. As shown in this article

  Add features of Business Catalyst to your Muse sites

  Easily add Business Catalyst modules to your Adobe Muse Web sites.

  Let me know if you have any question.

• Run the Script using hotkey in InDesign

  Hello

  How to run the script in InDesign using the shortcut key.  Can someone help me?

  Thanks in advance,

  Sudha K

  

• Execution of the script using the shortcut key will launch the ExtendScipt Toolkit.

  Run the script by using the shortcut key assign will launch the ExtendScipt Toolkit in a machine.

  Maybe not the Script because it works normally if a double-click is used to run instead.

  Another idea?

  What shortcuts are you trying to use? If they include the shift or Alt/Option keys, then ESTK is raised to the top because it is this that these keys if you hold either button down on launching a script.

  Dave

• SWF based Image Slider causes WARNING "Blocked the Script" in Internet Explorer

  Hey guys,.

  Recently, I've coded a basic image slider/slide show in Flash CS5. Bassicly, it's just a bunch of images that slide by interpolation of movement in and out of view (like on the right side of the pizzahut.com, my insperation clients) but, when published and threw in my HTML code, it causes Internet Explorer to give the "to help protect your security, Internet Explorer has prevented this Web page to run scripts or active X Controlls" and you must click on the little bar at the top and select "Allow blocked content" to the slide show work. I coded this show in flash (published in a SWF) specifically to avoid this warniong (as opposed to J-Query) and I have sites I made of similar SWF image cursors that are not through this warning (http://www.grangerfun.com/pizza.asp) for example. Y at - it something I am doing wrong? A publication setting maybe? Thanks for your help!

  upload you your files on a server to test?