Certificate of the signer is different in the message

Similar Questions

• Create the certificate and Code signing

  Hi all

  I'm still a little confused on the operation of the certificate and the sign Code.

  First I used Flash Builder Burrito to create my certificate and I choose my file syc. After that, I got an email from RIM saying that my registration has been completed. After that, I realized that the certificate I created has a different name than I used to ask my sign code. When I created a new graduate with the right name, I could associate the core sign in my new certificate and get this error

  

  When I tried to sign my application via command line, I've got it successfully: "Bar signed."

  Does anyone know why I get this error message, and if the command line worked really. can I use different certificate with a sign code?

  Thank you very much

  Hey arthur,.

  the rule is that if you mess up the record in some way, it is best to ask a new set of signature keys. You can not reinstated a key already registered. also, I saw that you use Flash Builder to make the entry to the registry. Although I've seen this work, I recommend that do the actual packing and signature via command line. Good luck!

• SG300-28 import self-signed SHA2 certificate to the SSL Protocol (including the format? How do I?)

  1. What is the format a certificate and private key combination should play during import to use SSL?

  2. how actually import you - via CLI or web interface.

  I'm trying to import an SSL certificate that is self-signed in the SG300-28 to secure the connection to the web interface of the switch. The certificate is signed by my own 'certification authority' / custom root certificate.

  I tried to do it via the graphical interface of web management (security > SSL server > server SSL authentication) and the command-line via SSH. I will detail my exact process below. I had no problem importing a certificate created in the same way to the Cisco RV320 router, although the web interface is different.

  How to create a certificate that is accepted by the switch?

  (Image Active) firmware version: 1.4.0.88

  My approach:

  1. OpenSSL 1.0.1f January 6, 2014; on an ubuntu 14.04 machine
  2. Create my own, certificate of self-signed root:

   openssl genrsa -out rootCA.key 2048 openssl req -x509 -new -nodes -key rootCA.key -days 3650 -out rootCA.pem

  3. create a private key and the real certificate and sign them using the rootCA.pem:

   openssl genrsa -out switch.key 2048 openssl req -new -key switch.key -out switch.csr openssl x509 -req -in switch.csr -CA rootCA.pem -CAkey rootCA.key -CAcreateserial -out switch.crt -days 3500

  for later use, export the public key of the switch.key - file using

   openssl rsa -in switch.key -pubout > switch.pubkey

  4. open the web interface of the switch and check for the SSL settings (Security > SSL server > server SSL authentication).

  4.1 click "import certificate".

  4.2 paste the contents of the switch.crt file in the ' certificate:'-textbox

  4.3 to import pair of RSA keys

  4.4. Paste the contents of the switch.pubkey file in the public key field

  4.5 by selecting the 'Clear text' radiobutton control and paste the contents of the inside switch.pubkey

  4.6 click 'apply '.

  4.7 receive an error message 'invalid key head '.

  The private key looks like this (oviously, I created a new one for this example):

   -----BEGIN RSA PRIVATE KEY----- MIIEpAIBAAKCAQEA3gOvNzKqULXnT7zL9fl4KJAZMo5eYHfwPSN0wl385na37oHz [23 more lines truncated] aB7Pooa60anjIVJmlSIp4WJ8U+52BMKJZ5rqHnJ1sBBo1zpAtcdspg== -----END RSA PRIVATE KEY-----

  I also receive a header invalid key error when you try to import the private via CLI SSH key using:

   switch(config)#crypto key import rsa

  I also converted the certificate and the private in PKCS12 and then back to the PEM key that gives me the following private key "head" which is not always accepted when pasting in the CLI:

   Bag Attributes localKeyID: FE 24 88 34 66 BE E9 DB CE 4E 91 23 2C 0E 03 B1 A7 58 32 24 Key Attributes:  -----BEGIN PRIVATE KEY----- MIIEvgIBA[...] -----END PRIVATE KEY-----

  What key header miss / what am doing wrong in general?

  It seems that ' import key cryptographic rsa "command is not suitable for import SSL key related private, but rather for the importation of SSH keys. Code "key header is missing" means that switch expects anything other than "-----BEGIN RSA PRIVATE KEY-----", for example the headers that you can see after the execution of ' view keys cryptographic rsa "(- START PRIVATE KEY ENCRYPTED SSH2-).

  To get your SSL certificate installed, you have two options:

  The CLI option:

  • create a RSA private key with command

   switch(config)#crypto certificate 2 generate key-generate 1024

  • create the certificate request with

   switch#crypto certificate 2 request

  (don't forget to provide all information for this order, including '' cn '' and so on). Note that this command must be executed inside the privileged mode and not in mode configuration as the previous command.

  • After you run this command, you'll get sign certificate request (CSR). Copy and paste it into the new file on the server that hosts your certification authority.
  • now sign this CSR file with the command that you have already used:

   openssl x509 -req -in switch.csr -CA rootCA.pem -CAkey rootCA.key -CAcreateserial -out switch.crt -days 3500

  • After signing to just open the file "switch.crt" and copy all content between BEGIN and END section including.
  • and import this certificate with order

   switch(config)#crypto certificate 2 import

  • and finally for your certificate to be active, do it with the following command:

   switch(config)#ip https certificate 2

  WebGUI option:

  Here, the procedure is similar to the CLI:

  • You must click on "Generate certificate request" in the "Security-> SSL server-> server SSL authentication" section, fill in all necessary data and click on "Generate certificate request."
  • you will get CSR data you need to paste into the server with the certificate of the CA.
  • sign the certificate with the command openssl similar as mentioned previously
  • and import a certificate with maintaining "import RSA Key-Pair" unchecked.

  Personally I've never managed to get imported both key and certificate from the outside.

• Creation of my own CA, self-signed certificates and the use of these

  I'm stupid. Three years ago, I created my own CA and my own wildcard certificate for my OS X Server (always 10.8.5 with Server 2.2.5). I install my public Root CA on clients who make use of my server. At these must not often updated and the work is complex, so I created a CA Vault take care of a few scripts and configuration of openssl. What I forgot is document how to get these used by Server.app. That's why I'm stupid, because I struggle to reproduce what I did and discovered three years ago.

  I use two scripts. (MYNAME, mydomain and tld are generic strings, of course in reality I use my own name and mydomain.tld)

  The first is for the creation of a root certification authority:

  #!/bin/bash
  
  # Only edit these:
  mycaname="MYNAME Certificate Authority"
  myrootname=mydomaincaroot
  
  # Run in current dir:
  mydir=`pwd`
  
  mkdir RootCert >/dev/null 2>&1
  
  if [ ! -e "$mydir"/RootCert/"$myrootname".key -o \
       -e "$mydir"/RootCert/"$myrootname".crt ]
  then
      openssl req -config "$mydir"/openssl.cnf \
    -new -x509 \
    -keyout "$mydir"/RootCert/"$myrootname".key \
    -out "$mydir"/RootCert/"$myrootname".crt \
    -days 3650
      openssl pkcs12 -export -clcerts \
    -inkey "$mydir"/RootCert/"$myrootname".key \
    -in "$mydir"/RootCert/"$myrootname".crt \
    -out "$mydir"/RootCert/"$myrootname".p12 \
    -name "$mycaname"
  
      echo "Now import ""$mydir""/RootCert/""$myrootname"".p12 in KeyChain"
      echo "For this, unlock the System KeyChain first, then import"
      echo "NOTE: this imports your private key in the System Keychain"
      echo "So it can be used for signing activities."
      echo "This is less safe then keeping your private key on media that"
      echo "cannot be accessed from the system, like a safely stored USB stick"
  else
      echo "Your root CA crt and key already exist! I will not overwrite this"
      echo "as this could overwrite a still used private key and lose you access"
      echo "to signed certificates, e.g. for revoking them"
  fi
  

  I think I know what to do (but Advisor is always welcome). I have to add the certificate of generic identity for the Keychain system, after which I can use in.app.

  Now I encounter another problem: when I enter the certificate in the system Keychain, it ends up in/etc/certificates without a. fichier.pem. See: OS X 10.8.5 Server 2.2.5/Keychain Access certificates issue for more details.

  Help is always welcome.

• installation of virtual pc on W7 error: 0 x 80096002 the certificate of the signer of the message is invalid

  I recently updated my W7 PC to W8

  I would like to install Virtual PC because I have important software that worked on W7 but will not work W8 (I thought wrongly that there was little underlying technical difference between W7 and W8)
  When I run the MSU Windows6. 1 - KB958559 - x 86-RefreshPkg I get this error:
  Windows Update Standalone Installer

  error: 0 x 80096002 the certificate of the signer of the message is invalid
  I really need virtual pc work soon otherwise I'll have to give up on W8 I won't do (even just because I have to spend 2 days of slower, re-installing software!)

  Hi Richard

  Virtual PC is not compatible with Windows 8.

  Windows 8 includes components of virtualization of the Hyper-V that you can use.

  If you have any questions about this item, please ask in the following forum. That's where Hyper-v experts answer questions.

  Virtualization of Windows 8 Forum:

  http://social.technet.Microsoft.com/forums/en-us/w8itprovirt/threads

  Concerning

• How to find the certificate used to sign app?

  There is a site that uses DBsign UWS to validate personal certificates on a smart card.  I found myself breaking this feature by moving the default Java truststore so I could create a new one with a few roots/split AC that I trust (I have no desire to let apps signed by China, Russia, Turkey and countries spelled with heiroglyphs).  Now, my browser thinks that the UWS is self-signed and rfuses to run it.  I need to find the certificate used to sign this app to see what cert (s) sign, so I can add them to the truststore.  How can I find that?

  To answer my own question:

  jarsigner - verify - verbose - CERT DBsignUWS.jar

• How to disable "signed with the certificate from the certificate store.

  Adobe Reader v11.0.10, opens in trial mode.

  «You use features (sign with the certificate from the certificate store), which require a license with more features (Expert).»

  The program will continue, but your document will show that it was made in demo mode.

  Under the document keyword properties I see ' "MODE of TRIAL / Expert features: sign with the certificate from the certificate store" "

  I uninstalled and reinstalled Adobe Reader do not understand how to return to original and free characteristics.

  So the question is, how do I disable the functions that require a license?

  I have found the source of the problem and and embarrassed to say he wasn't Adobe Reader.  The problem was in the program I used to create a PDF document (he used a cert to sign the document) which was then opening Adobe Reader.

  Please consider this issue resolved.

  Thank you

  R.

• All the sites SSL Web I visit displays the message "this connection is untrusted" and shows me a false SSL certificate for a different domain name.

  When I visit a Web site that requires SSL I displays the message "this connection is untrusted". Any Web site that I visit, it's always exactly the same message and the same SSL certificate that she is no longer valid for www.thawte.com

  support.Mozilla.org uses an invalid security certificate.

  The certificate is not approved, because no sender string has been provided.
  The certificate is valid for www.thawte.com
  The certificate expired on 11/11/2011 23:59. The time now is 11:46 28/01/2012.

  When I click "Add the Exception" on a Web site and view the certificate, it is exactly the same certificate with the exact same serial number.

  I had a similar problem with Internet Explorer showing a 404 error when I visited SSL protected pages but to do a restore of the system a month ago to correct this. All other bowsers are / were very good.

  I installed Firefox 3.x month last to test something that is when the problem started. I have since uninstalled Firefox 3.x and reinstalled the latest version. I deleted all the preferences/settings, disabled modules and reinstalled many times. I did a Windows system restore to before that the problem started with no luck.

  The time / Date on my computer are correct. I have no firewall other than the windows one. I had no antivirus (netbook) until I installed a (Avast) yesterday to see if a virus was causing issues (found nothing). This problem arises on any internet connection (tested to work and home).

  Try bypassing the caveat

  or try to use the module Skip Cert error (to jump to the SSL/TLS certificate error page)

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Pre complains about SSL certificate on the exchange server

  Hello.  I just got a pre and tries to set up to communicate with an exchnage server.  Pre complains and will not set up the connection with this error message: «"SSL certificate error.» Is the date and time correct? ».  The date and time are correct, but the server is running a self signed certificate.  This causes no problems with iPhones that use a lot of people here.

  How can I fix it?  It is not all parameters for this problem.

  I spent the weekend trying to test and understand what was going on.  I found that if I nominated the e-mail server (name after HTTPS: / / in Setup) the same as the name of certificate displayed in the Certificate Manager (Launcher > Device Info > more info > Menu > Certificate Manager), the error should disappear.  The problem for me was that the name of cert in cert Manager was different from address of mail server (in my case server. [domain .local] instead of mail. ([Domain_name] .com).  The transformation it seems to use is:

  (1) find the certificate...

  (2) CN is HTTPS: / / in the installer?

  (3) If no, use error 'Verify the certificate, date and time not correct' (or whatever it is) - If Yes, go to HTTPS: / /.

  (4) Exchange requires safety pin?  If no, proceed to synchronize - if so, use error "unsupported of security policies.

  So I looked more closely CERT and it held several common names (CN) for the cert.  It seems that ANY OTHER DEVICE can filter through the list of common names, and use the one that works.  The Pre uses only (whether first or last, I don't know).

  So, there are two options for the certificate problem (I guess the 3rd is that you can return the phone):

  FIRST SOLUTION

  =====================

  (1) check the name of cert in cert Manager.

  (2) if it is a name that can be resolved DNS (i.e.  [mail]. [mywebsite]. [com]) then change this setting in your exchange installation program in the mail server field beside the HTTPS: / /.

  This will only fix it if your COMPUTER administrator has with permissions on the used field.  It is possible that an alias is used on other areas

  SECOND SOLUTION (as I have done)

  =================================

  (1) ensure that your Certification Authority is installed.  You can do it by clicking START > ADMINISTRATIVE TOOLS > CERTIFICATION AUTHORITY - OR - on a computer on your network using IE/Safari/Firefox and typing http://server/certsrv.  If the page is found, then you are installed, if not, then you will need to have installed.

  NOTE: SBS 2003 WILL AWARD A CERT TO THE IIS WITHOUT THE ROOT CA.  THIS SEEMS TO BE THE PROBLEM WITH THE AUTO CERTS GENERATED I HAD

  (2) If you have not installed it, go to this topic, it is well written to get step by step instructions how to install, create demand for cert, create the cert and install the cert (it took me about 30 min).   http://www.MSExchange.org/tutorials/SSL_Enabling_OWA_2003.html

  NOTE: IF YOU ALREADY HAVE A CERT ON IIS, YOU NEED TO REMOVE IT AS IT IS "DEFECTIVE" CERT BEFORE YOU CAN REQUEST A NEW CERTIFICATE.  YOU MAY BE ABLE TO REINSTALL OVER THE NEW CERT, BUT I DON'T KNOW

  (3) open https://mail.domain.com/exchange on your computer - display details of the cert and save the file on your desktop - if you are using a laptop, you can also install it on your laptop to use for use outside the Office (this is also a good back-up that you can use to get more later if needed again).

  (4) plug your pre in USB mode.

  (5) slide the cert and unplug the USB cable

  (6) go to cert Manager

  7) tap on the icon of "Sun" at the bottom left

  (8) press on the new file cert that you save in USB mode

  (9) to confirm that the new cert appears with the name of the correct mail server

  10) go to the e-mail program and configure the exchange account

  The above will create a REAL root cert (not IIS domain root Cert) that the Pre can work with.

  Really, I don't know that how/why Palm overlooked this possibility because they claimed so-called does not want to sell to companies who need strict security requirements.  For me, it means a small / medium company that has limited IT supports (according to the needs, pay as you or green guy with limited knowledge).  Then, why they test the GER in this environment, I'm not sure.  I bet they were tested on their own network, which has all the correct methods, best practices for the management of cert.  I guess it's like the developers that they have offended and almost lost their support until turned it over and said: 'sorry, we really want make you programs for our platform WebOS. ".  We've just been paranoid for so long salivate us when the bell rings. "They just didn't beta test this well enough.  The sad result of this is that Sprint will have to address all of the sheets because this certificate simple reading process was given only minimal recognition capabilities.

  But having said that - I'm now completely in love with my pre!

  I'm happy to try to help if you need it.  I found a lot of the forum of solutions were not enough detailed, so do not hesitate to contact.

• SSL certificate for the Security Server external facing

  Dear all,

  Today, I bought an external SSL certificate of DigitCert for our security server. I imported the certificates in the personal certificate (computer account) on the Security Server store. DigiCert provided three certificates, root CA, CA server and the other with the name of our domain. I renamed the vdm to the friendly name of the existing self-signed certificate and used the friendly name for the certificate vdm has our domain name. Subsequently, I rebooted consulting on the Security server. They are all released on except the "Display Blast Secure Gateway" service which entered the suspended state.

  On our facility, we have a connection to the server and a security server. To the Security Server, we use a different domain name for connecting to the server. We have an internal PKI and the connection to the server uses an SSL certificate.

  connection to the server = server01.internaldomain.com

  Security Server = server02.externaldomain.com

  Why the certificate cannot be loaded to view Blast Secure Gateway? I missed something?

  Thank you

  Edy

  I solved it. It was with the private key of the certificate. This is the reason that the Blast Secure Gateway could not load.

• Office proxy firewall monitor secure connections (https) and send their own certificate instead of the certificate of the Web site

  Firefox works fine on my home network or while I connect to the internet directly via data card. However, @ my office use us proxy and for almost all sites (even google search) Firefox stops saying "this connection is untrusted".

  Attached are the screenshot for the same thing to help him to help me.

  I search a lot and was closest to you that I came to this url https://support.mozilla.org/en-US/questions/978722

  Is there a way to Firefox to add office proxy certificate in the certificate chain (don't know if that will help?)

  How to solve this? Kindly advice.

  I think most of the proxies work similarly: they generate a false certificate to the site and have your browser so that they can decrypt and inspect the traffic between you and the site. It is a hassle to have to make exceptions for individual certificates of false - it is more effective to recognize the certificate that the proxy uses to sign false certificates as valid a certificate authority.

  The trick is to identify this certificate. It might be easier to go to IE or Chrome, since both use the Windows certificate store (Firefox uses its own). By inspecting the certificate for a secure site and the certificate used to sign, you may be able to identify and to export this certificate (DER format or .cer).

  In Firefox, you who would incorporate in the section of the authorities in the Certificates dialog box:

  "3-bar" menu button (or tools) > Options > advanced > mini-onglet Certificates > "View certificates" button > mini-onglet References > "Import..." button »

  Of course, it is probably safer to check with your COMPUTER that you've found and exported the correct certificate before you import it into Firefox.

• In preferences - advanced - encryption - view certificates - authorities, the Option 'Delete or distrust' seems to be inoperative (recently hacked).

  I tried the above steps to remove certain certificates looking for suspects after unusual online experiences using WiFi without success. I "removed" a number of different certificates and then selected "ok" only to see them all reappears again and again. Since then has been an event recent hacking, I have also adopted a number of other steps involving our WiFi, computer and e-mail in addition provider the Firefox browser. Any thoughts?

  You cannot delete root of build-in certificates.
  
  You can only remove the bits of the trust to prevent Firefox to use the certificate as the root certificate and that's what Firefox in this case.
  
  You can check that by clicking on the button change.

• Sony walkman b172 unable to get the certificate of the device to transfer any music! Help!

  I have recenetly had my new sony walkman b172, I just installed and registered the device in my name, when I go to transfer all synchronization musicor music in WMP, it says Error failed to get the certificate for devices, please make sure that its not busy and try again, I tried different USB ports and everything but without success, anyone has any help at all please!

  Exactly the same problem with NWZ-E475. Some albums synchronize very well but others say... .not possible to get the certificate of the device...

  Why since on my old 4 GB Walkman the exact same files have been transferred OK?

• Error security website, certificate of the root CA certificate is not approved. To enable trust, install this certificate into the store certificate authorities roots of trust.

  Original title: CERTIFICATE ERROR in OUTLOOK

  I am using windows 7 Home Edition premium, of late, when I connect to my e-mail in Outlook I get the message, there is a problem with this Web site security certificate.

  My partner can successfully connect to their account using the same laptop.

  I noticed his security certificate is by VeriSign etc, but mine is by mail.live.com, and he says this CA Root certificate is not trusted. To enable trust, install this certificate into the store certificate authorities roots of trust.

  Mon, 15 Sep 2014 00:41:34 + 0000, Jonkers55 wrote:

  I am using windows 7 Home Edition premium, of late, when I connect to my e-mail in Outlook I get the message, there is a problem with this Web site security certificate.

  Are you talking about the Outlook program or the Outlook.com web site?
  They are two very different things.

  Microsoft has confused countless people giving these different
  things of similar names.

• AnyConnect 3.1 - the certificate on the secure gateway is not valid

  Hi guys,.

  I have a problem with the Anyconnect 3.1.01065.

  When I try to connect I get the "the certificate on the secure gateway is not valid. A VPN connection can be established.

  The certificate is a signed cert self.

  Woks AnyConnect 2.5 without problems.

  Image of the ASA: 8.4 (2).

  [27.11.2012 15:58:27] Ready to connect.

  [27.11.2012 16:01:49] Contact IP_WAN.

  [27.11.2012 16:01:52] Please enter your username and password.

  [27.11.2012 16:02:01] User credentials entered.

  [27.11.2012 16:02:02] Establish the VPN session...

  [27.11.2012 16:02:03] Checking for updates to profile...

  [27.11.2012 16:02:03] Checking for updates...

  [27.11.2012 16:02:03] Checking for updates of customization...

  [27.11.2012 16:02:03] Execution of required updates...

  [27.11.2012 16:02:08] Establish the VPN session...

  [27.11.2012 16:02:08] Setting up VPN - initiate the connection...

  [27.11.2012 16:02:09] Disconnection in progress, please wait...

  [27.11.2012 16:02:13] Connection attempt failed.

  Anyone had this problem before?

  Thank you very much.

  Hello Cristian,

  Please see this:

  CSCua89091 Details of bug

  the local certification authority must support the EKU and other necessary attributes

  Symptom: The local CA on the ASA server currently does not support attributes like the EKU. This enhancement request is to add support for this. Workaround: Configure the cert on the customer's profile

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCua89091

  And the following:

  DOC: Anyconnect supports Extended Key use specific attributes in CERT

  Symptom: When using certificates with the anyconnect client if the certificate is installed on the SAA does not have the EKU attribute set to "Server authentication", then the anyconnect client will reject the ASA certificate as invalid. The certificate of the client id must also be '-l' client authentication "otherwise the ASA he will reject... Conditionsof : Use a certificate of id on the ASA with one other than «authentication server» EKU Use a certificate of id on the client that has one another EKU that '-l' client authentication. Workaround solution: Generate a new certificate of ID with correct extended key usage

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCty61472

  If at this point, you need to set up the corresponding certificate or use an earlier version of the AnyConnect client.

  HTH.

  Please note all useful posts