Change a disk 8 GB to FAT16 flash and starting it

Similar Questions

• I uninstalled Adobe Flash and then tried to download. I get a message from Adobe saying 'Failed to initialize' is there a setting on Mozilla, I need to change to allow the plug in?

  I uninstalled Adobe Flash and then tried to download. I get a message from Adobe saying 'Failed to initialize' is there a setting on Mozilla, I need to change to allow the plug in?

  Why don't you use Firefox 7?

  • getfirefox.com

• I was using my MacBook today and it crashed and the dock turned silv, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock turned

  I was using my MacBook today and it crashed and the dock turned silver, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock has transformed money! I tried to restore Mac OS and then also the same!
  OS El Capitan

  This can help:

  Reboot safe mode (it is a slow process):

  -stop of the mac

  -Start up the mac in shift, press and hold until you see appear it to progress bar, so you can let go

  -When everything started, connect

  -Once connected, stop the mac once again, nothing else is necessary.

  -restart normally.

  Lex

  PS: This clears all system caches.

• Didn't have a lot of space on my main hard drive can I change the disk external usb in the primary drive?

  Please can you help me I am using windows xp sp3 and I have, nt enough space on my hard drive that I can change the external USB hard drive "which is more important" in my main drive?

  Please can you help me I am using windows xp sp3 and I have, nt enough space on my hard drive that I can change the external USB hard drive "which is more important" in my main drive?

  Physically?  Sure.  Without removing it from its holster and moving into the computer?  N °

  Buy a new internal drive for the computer - bigger than the current one.  Use the utility it gives with the purchase of most readers of detail (or download from the OEM drive manufacturers Web site) to clone the old smaller disk on the newest disc with much new spaces.  Fact.

  I suggest you do the following:

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version if requested):
  How to reset the Windows Update components?

  Reset.

  You're probably done with free space that you did not have before, and a little bit of a cleaner system.  If your hard drive is not ridiculously small or you use any products AutoDesk and Adobe on this computer - you should be able to free up enough space by moving * your * stuff.

• Screen flashes and changes made to vista Basic, then flashes back to aero?

  the scheme of Visual problems with opening the images photo gallery / video folders, flashes and changes to vista Basic, then flashes back to aero? the ball of information in the taskbar windows photo gallery pid States 7868 can someone help me?

  Hello theplantpot,

  Thank you for your response.

  You can check the link below, located on the support site provider of software for more information about the program and Aero under the output video heading problems and related issues:

  http://wiki.videolan.org/WindowsFAQ-1.1.x

  Alternatively, you can view the link below, with the steps to solve the problem:

  http://Forum.videolan.org/viewtopic.php?t=32513

  If the problem persists, you can also try to contact the software vendor for more information about the configuration of the program.

  http://www.videolan.org/support/

  I hope this information is useful.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot find where to change "scratch disks"

  As you can see I have not change work disk option in Edit-Preferences. I need to change the disk D because that run out of memory

  

  O soory. just noticed that there is another window for them, not a preferences

• Change the disks used in the disks of OCR/vote DiskGroup

  Hello

  RDBMS...: 11.2.0.4

  ... OS: AIX 7.1

  In our environment, we have a diskgroup used to store records OCR and voting. The diskgroup contains 3 discs 15 GB each and is configured with normal redundancy and is called "OCR".

  My question is: We must change these 3 discs with 3 new disks to a different memory. I would like to know if it is possible to add these new 3 drives in the diskgroup OCR, wait for rebalancing and after this operation, remove the old records? This approach is viable? Or we need to create a new diskgroup, place the OCR and the discs with right to vote in this new diskgroup and remove the old diskgroup?

  Thanks in advance.

  You can add and remove asmdisk by using the procedure in the DSO without problem, make sure just as there are enough failgroup to contain the votedisk.

  OCR and ASMSPFILE connection:

  The OCR and the ASMSPFILE are stored similar to how Oracle database files are stored. Scopes are spread across all disks in the diskgroup and redundancy (which is the measurement scale) is based on the redundancy of the disk group. When you add and remove some asmdisk these extensions are moved automatically during the rebalancing process.

  No relocation is necessary for OCR to ASM SPFILE.

  VOTEDISK topic:

  The VOTEDISK is not stored as OCR, each VOTEDISK (one per ASMDISK) are placed directly on the ASMDISK (near LUN header) then is necessary relocation Votedisk.

  Suppose you have 3 asmdisk each own FAILGROUP disc (A, B and C) and you add more ASMDISK 3.

  So if you use a normal redundancy, you need to configure at least 3 new failgroup (a failgroup for each new ASMDISK).

  When you issue "Alter diskgroup xx drop... drive A, B and C" the clusterware start automatic resettlement treat mobile votedisk to disks on failgroup D, E and F.

  You will see the process on the alert_log of ASM and cssd.log.

  After finishing process of rebalancing, check if they fall on disk have a status of 'TRAIN' and there is no votedisk thereon ($ crsctl query css votedisk).

• How can I change the size of my brush in Flash CC?

  I'm pretty new to flash and I can't seem to change the size of my brush. The cursor is a faded gray and not moveable. Some help would be appreciated.

  the brush size is controlled in the Toolbox, not the properties panel.

• Given that you have blocked Adobe Flash and I uninstalled as suggested by many commentators, what are my options to see the content I want to see?

  Yet once, now that Adobe's Flash problems are everywhere the news what are my options to display the content on the sites that were previously used by Adobe Flash? I uninstalled Adobe Flash, but need an alternative. Thank you!!!

  Mozilla had 'soft-blocked' version 18.0.0.203 and earlier, which still allowed you will activate Flash on websites of that trust.

  If you are not accustomed to using the "Request to activate" feature with any of your plugins, here's what to expect:

  When you visit a site that wants to use the Flash, you should see a notification in the address bar icon and one of the following: a link in a black rectangle in the page or an information bar slides between the toolbar and in the page area.

  If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the Lego-like icon in the address bar to allow Flash.

  But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification. It will just sit there in case you later want.

  Until this ordeal of previously unknown security flaws shakes, you might want to try this and see how it fits. To set the Flash "Ask to activate", after you have reinstalled it, open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

• I have firefox I put in player17.0.0 flash and I can't see vidios on utube or play games on facebook or zynga. Why not? What should I do?

  When I was asked to update my flash player, so I did, I was playing farm town 2 on Zynga. When I did, I went to play my game and the image would not return. The site came, but the game would not load completely so that I can play the game. I'm went on You tube to play music videos and the videos would not play. I went to my WWE network to see if I could look at him and I could not watch anything there either. I can not even play my games book face. I loaded and unloaded flashplayer at least a dozen times or more, and I still can't get anywhere. I can also do not charge any old version of flash player. What should I do?

  First of all, unfortunately, pop-up message on the Flash updates while you visit Web sites can often install malware. If you notice any strange behavior then please complete your plan of regular safety with some freedom to scan/cleaning of the tools listed in our technical support article: Troubleshooting Firefox problems caused by malware.

  Secondly, your "more details of the system" does not show the 'Shockwave Flash' plugin, so it can be disabled. You can check on the page modules, either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search for "Shockwave Flash", and if you find it, change permission to 'never activate' to 'ask to activate '.

  If the plugin is not there, you can check the following folder to see if you find this file on the system:

  File: C:\Windows\SysWOW64\Macromed\Flash
  File: NPSWF32_17_0_0_188.dll

  I also noticed something odd: you said Windows 7, but your Firefox means Windows XP. Could clear you any parameter of backward compatibility on your shortcut to Firefox. Here's how, either:

  • Right click of your Firefox shortcut on the desktop > properties
  • right click on your icon of Firefox taskbar pinned > Mozilla Firefox right-click > properties

  In this dialog box, open the Compatibility tab and make sure that nothing is settled here, so Firefox can take full advantage of Windows 7.

• a web site that I use every day tells me that I must now download flash and enable the java script, how can I do this?

  I use the American family site every day, and today when I went to play the games that I play every day instead of the game coming to the top, a notice that says I have to install flash and activate java script in order to see these games.

  You do not have the Shockwave Flash 11.0 r1 plugin so Flash should work.
  
  You can test here:

  • http://www.Adobe.com/software/Flash/about/

  That leaves option that you've blocked JavaScript.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Since I upgraded to 7.01 (linux xubuntu) firefox seems to crash, but only on the pages have something to do with Flash. I served flash and reinstalled and it seemed to fix, but is happening again today. Is there something I can do to fix this?

  I have Linux Xubuntu.
  I had 11.04, but upgraded to 11.10. bold text
  I've never had a problem with firefox until I upgraded to firefox 7. I've always made changes to about: config and went through my edits and none is related to this.
  I just checked on: fails and I had 34 accidents since the upgrade on 11.10.11
  Fix on the 13th, it seemed to me that there can be no planting until the 17th and it was through flash and then purge by reinstalling the necessary packages.

  I solved this problem by disabling hardware acceleration. At the time where I went down as my flash 10 (instead of 11).
  This option is no longer available. But disable hardware acceleration seemed to fix it.

• HP g6t - 1B 00 CTO: charger indicator led flashes and is white in color

  I replaced the battery with a new battery Duracell yesterday.  I need to load at least 4 hours first then it unloads.  When the charging light is usually yellow, but after about an hour on the charge, it starts flashing and the white color changes.  This is the second battery.  He did almost the same thing with the other, but also incorrectly read indicator.  What can I do to fix this?

  Thank you

  The replacement of the Duracell battery did not work.  I tried recalibrating several times and ended up with the same question.  I recently had a replacement for Duracell on another HP and it worked fine.  I will be chalked up the differences between the two laptops I have.  I have to replace HP and it works fine now.  The only real question there I can't order the most sustainable one because he is no longer offered by HP.  A small trade off the coast.  Thanks for the help.

• Help the flicker of screen HP Elitebook 8460p & question flashes and upgrade.

  Greetings,

  I have a problem with my Elitebook 8460p. My old servant me service for 3 years. We have a good relationship with highes and downs. Changed hard drive, the improved Rams, monthly cleaning and etc.

  In any case; I have a problem with flickers and flashes. When I push the start of (the computer On / Off), some strange black lines appear and never went. The funny part is that the black lines, flashes / flickers become crazy when I touch the touch pad. But if I touched the touchpad of the black lines just less.

  Things I've done;

  Electrical parts Checked - no electric leakage (verified to the ohmmeter)

  I tried to run with AC and battery - nothing has changed.

  I've been handicapped ambient light sensor - nothing has changed.

  I've been disabled touchpad - nothing has changed.

  Formatting, update the BIOS to the latest version of w7 updated, no unknown device, performed stress test CPU GPU & played back & assemble nothing has changed.

  My suspicions;

  CPU because this computer VGA card integrated with CPU. Change CPU, maybe to fix any problems.

  I want to switch my computer to my choice and i7: Intel Core i7 - 2670QM.

  My booking / questions;

  Intel Core i7 - 2670QM CPU is compatible with my Chipset QM67? If it is compatible; What should I do? (Updated the BIOS, or different version of BIOS etc..)

  I have some information on this situation and my laptop.

  

  

  

  Video

  HP Elitebook 8460p series using Hannstar MV6 and my motherboard is same. No VGA. I will not worry the my solution. If I'm wrong; I spend my money for nothing.

  I'm waiting for your answers.

  Thank you.

  Really? No response. Thanx HP.
  I found the answer.

• My monitor flashed and now my screen is upside down.

  My monitor flashed and now my screen is upside

  Hi FrankMaffie,

  ·         Have to remind you to make changes on the computer before the show?

  You must have accidentally hit Ctrl + Alt + left/right/down/arrow up and the screen swivels.

  To make this work "shortcut keys" option should be enabled, otherwise it wouldn't work. Here's how you can enable or disable the "keys" on Windows XP.

  a. right click somewhere on the desktop and choose "graphics properties."

  (b) a window opens. There, you can press "Hot Keys" and enable or disable this option by checking or unchecking the checkbox.

  You can also view the Microsoft Knowledge Base article for more information on keyboard shortcuts:

   

  Keyboard shortcuts for Windows

  http://support.Microsoft.com/kb/126449

   

  List of keyboard shortcuts available in Windows XP

  http://support.Microsoft.com/kb/301583

  Hope this information helps.