Change catalog for the user

Similar Questions

• I bought my computer from someone else. Change user accounts did not name of each file in the computer. How can I change or remove the user/name (my name) /document? __

  I bought my computer from someone else. Change user accounts did not take their name off of each (or more) file in the computer. How can I change or remove the user/name/document
  I have looked everywhere and changed user information and the name of the administrator. What can I do else?

  Hello flashgordonjxn,

  Who has ever done the installation of Windows, the installation program asks you to enter your name and optionally, the name of the organization. These registration information appears under recommended for in the general tab of the System when you click Start, click Control Panel, click performance and Maintenanceand then click System.

  To change see instructions below:

  1. Click Startand then click run.
  2. In the Open box, type regedit, and then click OK.
  3. Look for the following registry key:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
  4. To change the name of the company, follow these steps:

     In the right pane, double-click RegisteredOrganization. Under value data, type the name that you want, and then click OK.

  5. To change the name of the registered owner, follow these steps:

     In the right pane, double-click RegisteredOwner. Under value data, type the name that you want, and then click OK.

  6. Click Exit on the file menu to exit the registry editor.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• NVidea 620 GT graphics card has a setting for the user to customize its appearance?

  Hello

  May I know if the graphic card Nvidea has parameters for the user to customize the appearance of its release?

  What selection a user could change?

  Thank you

  Low

  Video cards have no 'settings', as the bios of the motherboard.   Control PANEL DISPLAYS the fact.

• HP laserjet 1022 does not wait for the user to turn the pages when printing double-sided

  My Hp laserjet 1022 printer working properly for years.

  So far, when he executed more paper he tried a couple of times to get more paper and then stops with a message on the PC it is out of paper.

  Very annoyingly, this has changed recently, now when it is out of paper, he tries a couple of times to get more paper and watch the message on the PC, saying that it is paper and then again, try a couple of times to get more paper and again shows the same message on the PC and him back... This continues to go on and on.

  It's especially annoying when trying to print double-sided. Before he used to stop and ask you to turn the pages to print the other side. Now the previous behavior overrides the break to turn the pages and keeps it will try to get more paper. As now, it does not wait for the user to turn the pages, in general it spoils the impression out by getting another paper that is not what I wanted, he drives me crazy! It's really hard to print anything double face now.

  All solutions?

  Operating system is Windows 7, I just downloaded and installed the latest driver for this printer "2013-01-09, Version: 20120918" and I get the same behavior. In the properties of the printer that I put some State Messages to Off and at least I don't get the full windows message screen poping up every time the printer is trying again to get more paper. I have not found all the other parameters that may affect this behavior.

  Help!

  Hello

  I solved the problem! I found the original CD for the printer. I uninstall the current driver and then install CD and now when the printer is out of paper trying to get paper a couple of times and then stops, as it used to be.

  Thanks for your help.

  Martin

• Access policy for the user whose status is "disabled until the start date.

  Hello
  
  By default political access does not work for the user whose start date is later in OIM 11 g. I have an access policy that the provisions of all users of Xellerate OID. This policy is not work for users who start date is later, i.e. status = disabled until the start date.
  
  No workaround to make the strategy work is much appreciated.
  
  
  
  Thank you
  GYAN

  up to 10g it work very well if you put provisining date as the current date. But, you cannot apply even in oim 11g

  Try below

  Add new udf to the user profile
  reconcile the start date in the new udf and leave the start of oim null date
  In this case the access policy will be triggers and you will be able to get an account created to the OID, and then set the start workflow OID IOM

  for reminder and all just to add trigger for the new udf and update on the changes.

  Note: In your case as OID in disable State it will cause no problem after the user status "disable up to that Start Date. If the resource object in activate State and change you the status to disable up to that starting date, it does not fire disable the user trigger.

  Kind regards
  Mireille nayan

• Download firefox 10, Setup asked for the user account, enter the type of w/admin myPC, firefox exit installtion (Toshiba A665/I7/windoe 7)

  My computer is Toshiba A665 w/Intel core I7 and Windows 7 installed. When I run the installer of firefox 10, he asked for the user account ID and password. I entered the name of the computer that is mine with admin enter the account and a correct password. Installation of Firefox to quit smoking. No screen / another reply?

  Hello

  Please try a right click on the downloaded file and select run as administrator.

• The last IOS 9.3.1 is now safe for the users of IPad 2 GSM?  I don't want horrible IOS 9.3 activation problems recur everywhere.

  The last IOS 9.3.1 is now safe for the users of IPad 2 (GSM) download and install?  I don't want the horrible fiasco of activation IOS 9.3 reproduce anywhere!

  Yes, you can upgrade to iOS 9.3.1.

• Error number reserved for the user

  Dear Sir

  In my sweet, I use the cluster of error defined by LabVIEW

  Y at - it a series of numbers reserved for the user.

  Thank you

  Massive

  Help:

  Error codes 5000 to 9999 and-8999-8000

  http://zone.NI.com/reference/en-XX/help/371361B-01/lvhowto/creating_user_defined_erro/

  And als

  500 000 to 599 999

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=410869&query.ID=3477275#M410869

  Felix

• Microsoft Exchange Server error make a new box for the user's mailbox in my ad

  while I try to make a new mailbox for the user in my ad.
  There was an error...

  "Get-ExchangeServer failed.
  "Get-UMServer failed.

  "The server active directory K1.telkomcdp.com is not available. Error message: a local error has occurred. It was running the command ' get-recipient - Resultsize '1000' blah... blah... blah ".

  and active directory cannot be contacted

  I try to solve this problem all night... but it isn't anything happen,.

  need help
  Thank you

  Hello

  You will need to create a new post on the TechNet site for support with Exchange: http://social.technet.microsoft.com/forums/en-US/category/exchangeserver/

• Get errors for the user input data filter no KB 911895 HID

  OT: iI have windows xp S/P 3 installed also apple i pad I get errors for the user input data filter no KB 911895 HID
  What should I do to get rid of this popup that wizzard windows keeps giving me?

  Hi Graybeard,

  What is the exact error message you get?

  HID Non-User Input data filter is an optional update. I suggest you try the steps from the following link:

  The screen saver does not start after the installation of a wireless pointing device
  http://support.Microsoft.com/kb/913405

  What version of the operating system Windows am I running?
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339

• Is there a manual for the user of Windows XP and how can I get a?

  Is there a manual for the user of Windows XP and how can I get a?

  Hello

  See how you go with this...

  http://download.Microsoft.com/download/1/6/6/16674679-1e6e-4304-A5A0-49eeaa31e639/RevGuide.PDF

  Concerning

  GT4U

• XP hangs before logon for the user profile.

  Propely at startup of Windows, but XP hangs before logon for the user profile.

  The system does not start in all modes like without failure, command prompt mode, last know good Configuration. But it starts only in XP system recovery mode.

  What happened after cloning of a XP C: hard drive Sata Drive Dell OptiLex 760 to another System DELL OptiLlex 760 . I've used Norton Ghost 15.

  Hi ANM

  · Have you created an image of the system using Norton ghost backup software?

  When you create system images using backup software, it is supposed to ideally be used on the same computer, since you cloned it on another computer, it seems to me that the user profile is corrupted and failed to load.

  If the problem is the DELL OptiLex 760 system then I suggest you to connect with Norton Ghost.

  If not then you can follow the market from the link below: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to create a password for the user account for my child?

  How to create a password for the user account for my child?

  You can create the user with the parental control account. This will act as a protection for the child's account.

  You can take a look at the following links on setting up parental controls:

  http://Windows.Microsoft.com/en-us/Windows/set-up-family-safety#set-up-family-safety=Windows-7

  http://Windows.Microsoft.com/en-us/Windows/set-parental-controls#1TC=Windows-7

  http://www.howtogeek.com/HOWTO/10524/how-to-use-parental-controls-in-Windows-7/

• ACS 5.1 omitting the first attempt for the user

  Hi all

  I am facing a problem, a strange problem with the ACS. I use 802. 1 x on my network to authenticate users. I found that when I connect my network cable and put my authentication credentials will fail directly. I turn off my connection and will again and apply the same credentials, it works perfectly. I don't know why for the first attempt, it will fail the authentication and it will tell that (24217 host is not in the internal host identity store). You can see the table below showing the first attempt failed, but the second attempt successful for the user (testuser).

  DEC 6, 10 PM 1:31:11.656

  -

  testuser

  00-12-AE-7A-69-N6

  Default network access

  PEAP (EAP-MSCHAPv2)

  Dot1x-3560-Switch

  1.2.3.4

  FastEthernet0/8

  TESTACS

  DEC 6, 10 PM 1:30:43.393

  testuser

  00-12-AE-7A-69-N6

  Default network access

  PEAP

  Dot1x-3560-Switch

  1.2.3.4

  FastEthernet0/8

  TESTACS

  24217 l'hôte ne se trouve pas dans le magasin d'identités hôtes internes. Please find the picture as an attachment to the (sequence of identity store) Any help is appreciated Thanks in advance, Hello in your sequence of identity store, I would suggest that you remove everything from the text box below, called "recovery of additional attributes. Nicolas === Remember responses of the rate that you find useful Password for the user: ASADMIN is not configured error clicking on the deployed webservice Hello By clicking on the deployed webservice, getting the error below. Password for the user: ASADMIN is not configured. As mentioned in the doc https://support.oracle.com/rs?type=doc & id = 1311068.1 followed the steps. After recording there is a warning stating" "Role data updates will be not visible in the application until the following processes are started: Workflow background engine. Then I restarted the Workflow Agent listening Service. But when I integrated soa gateway connection again I get the same error as "password for the user: ASADMIN is not configured. Can someone help me with the problem? BR Magali When you run this script, make sure you pay attention to the case of your users. So, when running: Ant f $JAVA_TOP/oracle/apps/fnd/txk/util/txkSoaConfigUtility.xml addASADMINToFNDVault Make sure you use 'ASADMIN' and NOT 'asadmin' when it prompts you for the username ASADMIN. Maybe you are looking for What type of LAN is installed on the Satellite M100-233 Hello!Can someone tell me what wired lan type installed on my m100-233-psma0e-0pu01cru. I need to start from a floppy and HARD Norton Ghost disk image by lan, but I can't. Table of Boolean to a string MP970 Printer - 6A 00 error. Anyone know what this means? which suggests that something is not compatible - usb?  Error 6A 00 shows problem.  Appreciate any advice.  Thank you. Hijacked printer (Google Cloud Print) Someone else is somehow saved my printer in Google Cloud Print. I received a Google Cloud Print test page and a paper copy of their part. I've logged into my account ePrintCenter, changed my password.  Then I tried to change my ePrint settings. There I get calls from 999-910-0312 claiming to be Microsoft technical support. I don't know that it is a scam. When I ask how to get removed from their call list, they just hang on. Similar Questions Change catalog for the user I bought my computer from someone else. Change user accounts did not name of each file in the computer. How can I change or remove the user/name (my name) /document? __ NVidea 620 GT graphics card has a setting for the user to customize its appearance? HP laserjet 1022 does not wait for the user to turn the pages when printing double-sided Access policy for the user whose status is "disabled until the start date. Download firefox 10, Setup asked for the user account, enter the type of w/admin myPC, firefox exit installtion (Toshiba A665/I7/windoe 7) The last IOS 9.3.1 is now safe for the users of IPad 2 GSM?  I don't want horrible IOS 9.3 activation problems recur everywhere. Error number reserved for the user Microsoft Exchange Server error make a new box for the user's mailbox in my ad Get errors for the user input data filter no KB 911895 HID Is there a manual for the user of Windows XP and how can I get a? XP hangs before logon for the user profile. How to create a password for the user account for my child? ACS 5.1 omitting the first attempt for the user Password for the user: ASADMIN is not configured error clicking on the deployed webservice © 2024 eehelp.com. All Rights Reserved. 10 q. 0.012 s. Contact Us - Terms & Conditions - Privacy Policy