Change of colors in RGB and CMYK format objects

Similar Questions

• Why the relative values of RGB and CMYK will not change when switching between Photoshop and InDesign?

  I'm trying to put together a Guide to color for my company's brand guidelines.

  Initially, I worked for InDesign and copied all H, RGB and CMYK values that I had when I went in an eye my original color palette.

  However when I put the same values of RGB in Photoshop I gives me a (somewhat) a different set of CMYK numbers than I had initially documented in InDesign.

  Why is this?

  JamieCurtis5 wrote:

  It makes me feel a bit nervous leaving aside CMYK all together...

  CMYK is essential for a company's brand guide. The printer ask again, it's a simple and direct question. If they cannot answer this fundamental question, that speaks well of their professional standards. It is a common practice and highly standard procedure. I do it all the time (and get answers directly in the world).

  That said, if this guide in general and not necessarily related to this particular printer, it might be preferable, specify a profile which is commonly used as a general practitioner in your area. It depends on where you are. Here in Europe, it would be either Coated FOGRA39, ISO Coated v2 300% (eci).

  In the United States, I guess us Web Coated (SWOP) v2 would be on a list, not because it's necessarily just for the purpose, but simply done to be the default Photoshop. Printers must get loads of the present. Same here in Europe, where this profile is never used any where, a lot of people use it just because it is the default value of the PS and it never gets turned into something more appropriate.

• I should have a RGB AND CMYK profile in my document?

  It is clear - I'm a Dum-Dum Indesign. I have problems with a booklet that I print.  The same color of blue is printing very differently.  Two blue objects on the same page so differently that one of the objects looks purple print, and is considered the blue, I was expecting.  I did a bit of reading forum, and I wonder if the problem is that I cut and pasted some graphs in Illustrator, who may use a different color profile than InDesign.

  Enter my dialog box "Assign profile" selected buttons indicate that I use both CMYK and RGB color profiles.  Maybe that's the problem?  If you use the profile only one color in a document which requires the same color consistency?

  Update:

  I just checked the color profile of one of the graphics that I imported from Illustrator, and it is a CMYK document.  As far as I know, my ID document has been also implemented CMYK.  What I've done so far is: entered in attribute profiles and disabled the RBG profile, leaving only the active CMYK profile.  But is it possible that I use two different CMYK profiles, and that's where the problem lies?  If so, how to convert at the same profile so that the blue color is consistent throughout this brochure?

  Thank you very much!

  Can you give me any advice will be much appreciated!

  Thank you

  Bryan

  These fine technical answers are probably tell you more you need to know...  Basically, if you create a document and you want to 100% match, you will work in the space of a single color, only and with a working profile.  Assigning will change the appearance of colors, but depending on the circumstances, may lose the link fatally to original color values.

  Keep a profile when you create the objects.

  If you use an object that was created in a different work profile and this profile is tied/embedded, you can convert but not assign, affect the will perhaps break the color management and alter the appearance.  The only time where you must assign is if the object has already assigned profile and that you assign is the good that should have the object.

  As mentioned, appying effects such as feathers etc. can cause changes of colour of the original intent also.

  Opportunities to combine native RGB and CMYK objects and get a full match are small, as the colors are often converted by accessing the largest laboratory as an intermediate translation (among others) color space and the result is not symmetric (if you go there and back, you do not get the same result) and it is rounded values that causes small displacements.  These changes aren't bad for web stuff but results are often unusable in the press.

  Depending on your settings in InDesign, you can properly managed color in various objects that looks bad on the screen but to properly convert PDF for printing too... but that's another story!

  Keep things simple, to work in a space!

• Director of Windows changed my color to black and white photos

  I just finished a project and instead of color, Director of windows changed all photos in black and white when I burn a CD.  What should I do to bring back the color that show thumbnails.

  I chose black and white accidentally in the Visual Effects tab

• How to change the colors of tiles and framework

  The edges of my thumb nails are gray, and when I click on the edge for high - lite which becomes gray. This isn't different enough to me. Preferences are totally confused, and I don't think we can see the changes on the fly.

  In short, I'm confused what are the preferences for the miniatures and borders in the library grid. Thank you

  Hi Larry,

  You can't change the colors of the image, they are fixed.

  Preferences > Interface > background will be the only change the background image in the views of developing or magnifying glass.

• Photos of RGB and CMYK PDF

  Hello

  The press asked me to create a file PDF of CMYK to print. Do I need to change all the photos I have of RGB to CMYK, or is it enough for just the print to PDF with CMYK properties?

  Export to PDF using the press setting will automatically convert RGB to CMYK.

  Bob

• Change of color CC Photoshop and lightroom

  Hello

  Thus, this issue was repeatedly, but I just can´t understand, why this is happening.

  My workflow:

  Change in Lightroom, export when im done with the image, when nothing else is needed. I export in SRGB. The image looks great on the screen, when using Irfan View and viewer of windows, with colors, correct, as they are in the lightroom interface. Great everything´s here!

  But lets say, I want to make a few additional changes - this is where things go wrong.

  I m always in lightroom. I right click on the image and chose to change in photoshop cc.

  The photo opens, looks exactly like the version of lightroom. I apply changes and save them as a JPG. I ve tried recording in SRGB and Adobe RGB format. When I view the image of Irfan view, the look 'flat, ish and dull. " Now, I think I did something wrong, here's what I ve tried:

  Export to jpg from Lightroom, using SRGB.

  Save the same exact file (open in Photoshop via Lightrrom, don't edit and save as jpg, also making sure that it s to SRGB)

  Now I have 2 identical JPG files. But when I open in Viewer Irfan view or windows, the photoshop file seems dull and ish, while editing in lightroom seems perfect. The same thing happens when I print photos in my local photoshop - lightroom printing looks perfect, the Photoshop file doesn´t.

  When in photoshop, I check the 'view - color proof' image in my PS interface also looks like ish

  I ve tried everything and at this stage I Don t even like to use Photoshop more, because I think it destroys my JPG files. (Which in turn means, that there must be a setting I can change to make it work)

  I ve attached a shot showing the 2 files next to screen.

  

  Help, please!

  You have the profile of ProPhoto color image in Photoshop. That's how it comes to Lightroom with the default settings (you can change that in Lr preferences).

  Check you convert them to sRGB in Photoshop before the record on. Everything here indicates that you do not. If you use save for Web, you must check the "convert to sRGB" and "embed the profile.

  What is absolutely certain, it's that the right version looks exactly like an image ProPhoto read without color management. Proofing RGB turns off the management of color in Photoshop, so that shows you the same thing.

• Breakdowns of RGB and CMYK

  Hello
  
  I'd really like to see in Kuler using the CMYK and RGB breakdowns with the combinations somehow. For those of us who do not have apliications CS2 and cannot use the swatch exchanmge file, it would be really useful! Then we can just the number punhc in our applications to get accurate colors
  
  James

  If you click the "Make changes to this theme", it will give you all the ventilation you want.

• Color Gamut RGB or CMYK

  So I had this problem with Photoshop since I started using it on my Windows machine. On my Mac. I could put something in any color, and it seems to me like that on the screen in RGB mode. However, when I try and do it with the same exact color on my Windows machine, it appears black. I do not have the range of warnings on either. However, when I opt for the CMYK mode, the color appears. The problem with this is that I use photoshop for the GUI and such, not print material so if I show in CMYK Mode, it give me a vague look what the colors will look like.

  Could someone help me please!

  You have an AMD GPU?

  Have you tried turning off the GPU in Photoshop preferences? If it works, you probably touch a driver bug in some of their recent drivers.  The good news is that the drivers 13.2 beta fix the bug.

• CHANGE the COLOR to BLACK and WHITE HP 1515 PRINTER ALL-IN-ONE

  I WANT TO CHANGE COLOR IN BLACK & WHITE IN MY HP 1515 PRINTING, PRINTER ALL IN ONE

  Hi Niby,

  I couldn't find the manual for the 1515, but I found one for the 1510 and the process should be exactly the same.

  Please see the manual for this product:

  http://h10032.www1.HP.com/CTG/manual/c03832527.PDF

  Go to page 17 and see «Settings printer advice»  If you read this article, it will tell you where to go in the printer driver to select "Print in grayscale" or "black ink only.

  I hope that's what you're looking for

• prevent the user to change the color of report and highlight

  I used 5 APEX

  After matches the report as shown below

  

  
  

  I need prevent the user to change or remove the color & saved report

  Concerning

  Hello Rara,

  I don't know if there is an option how to remove just cancel 'X' button/image filter defined/facts highlights. Maybe some gurus should help.

  You can remove just 'X' next to point culminating with inspect the attributes of the button and set the attribute for visibility for it.

  In my case:

  button[data-highlight-id] {
      visibility: hidden !important;
  }
  

  You can see the demo on:

  https://Apex.Oracle.com/pls/Apex/f?p=16502:

  Demo/demo

  TAB: Refresh IR 5.0 Plugin

  Concerning

  J

• Change the color of text and background

  Hello

  I need to change the text color and the background for a whole text box and it's content with an iteration as little as possible

  For background, I use textframe.fillcolor

  and for the text, I am usinf textframe.parentstory.fillcolor

  Is this correct?

  Thank you

  Hey!

  Yes, it's ok.

  Also you can adjust the tint and color of the text according to the paragraph as follows:

  //fill text frame with color
  app.selection[0].fillColor = app.activeDocument.swatches.item("Red");
  
  //adjust fill color tint
  app.selection[0].fillTint = 20;
  
  //fill second paragraph
  app.selection[0].parentStory.paragraphs[1].fillColor = app.activeDocument.swatches.item("Red");
  
  //fill third line
  app.selection[0].parentStory.lines[2].fillColor = app.activeDocument.swatches.item("Red");
  

  I hope that helps!

  --

  tomaxxi

  http://indisnip.WordPress.com/

• Change image color in black and white.

  Hello

  I have a color image. I want to change the half-portion of the image in black and white. Can someone gice me the idea to do.

  Thank you and best regards,

  Sreelash

  I just do the conversion to black and white in Photoshop and import the image.  If the intention is to tarnsition of black and white to color (or vice versa), then I would have melted the _alpha of a movieclip taking the image.

• Change the color to black and white image

  I have a gallery of images with thumbnails of colors. Thumbnails are loaded dynamically into the loading component. is there a way to make the thumbnails to display in black and white on turnover without loading a new image for the part b & w? I was wondering if this could be done through alpha or mask?
  Please help - you good people out there. I can't find an answer on my own.

  :

• How to change the color of a part of an object

  As you can see in the image below, I have a log on a layer in AI CC.  I want to do the part of the log that is inside the water appears blue to give the illusion of being under water.  The image below is a rough mock-up I made a screenshot of the image to HAVE in PSD.  Any ideas on how to do this in AI CC are appreciated.  Thank you.

  

  Copy the form of water and river banks.

  Apset before

  Pathfinder palette > less Fornt

  Move the new shape of water on the log, release your layers and dragging the square colored layer unlocked over the newspaper (to the right of the layers palette).

  Set transparency around 50%. Change the mode of fusion also if you wish.

  I can't hear too good on one ear, then we will have to share a nickname tag.