change of sub vi pop up

Similar Questions

• Change the Sub.vi field

  I want to make a sub.vi to manage all of my property nodes that I use to customize my XY graph, and I have a general question about how I connect.

  Attached is a composite of 2 fired, the bottom is the expanded view of the sub.vi to change the route.

  In my main program (represented by half superior) my "Vibration response trace" is elsewhere in the .vi, within a state machine within a producer/consumer.  The .vi change parcel will be run before or after the plot has already been formed, not while he is in training.  (it is not placed inside the state machine with the real indicator of XY, but outside of it).

  I didn't know how to make nodes property to reference my field correctly when you use a sub.vi.  What I ended up doing was make a graph XY CONTROL in the sub.vi and wiring of a local variable in compatible reading at the entrance.  (I can not turn the main XY graph in the program in a control because I use the original indicator and a "build graph XY" to write about it.)

  I am concerned about 2 things:

  (1) if the nodes in my property will return the correct plot and change the background, plot color, etc. correctly in the main .vi

  (2) If using a local variable as long as such short risk to wipe the main XY graph to clean up data, i.e. If the local reads the chart before the data are there, but don't run the sub.vi until after data is collected, will it reset my chart when it crosses the sub.vi

  You must create a reference to the curve XY in the main VI.  Pass this reference to the Subvi and use it to access the properties and methods of the chart.  Everything you will ever in and out of the terminals as you do now is the value.

• Change of Sub Vars in Essbase

  Hello
  
  In order to change Sub VARs in Essbase, a user should be an admin in essbase, thus having full access to all applications, or is it some type of limited access that would allow them to change sub vars for their applications. I think as SubVars are at the level of the server, they will have to be admins Essbase.
  
  Thank you

  You can set subvars on the server, the application or database levels. To set at the server level, you must be a server administrator, at the application level and Director of enforcement at the database level one database administrator

• How to monitor the status of the main led VI, when LED changes in sub VI?

  In a sub VI a light on and 5 seconds later, the LED is off. How to read the status of the led in the main VI? The sub VI gives me only the situation of the end (LED off)

  Hi Johnny45,

  Please see attached examples for my suggestions.

  First example: sub_LV85.vi and main_LV85.vi

  Second example: Example2_sub_LV85.vi and Example2_main_LV85.vi

  It will be useful.

  Mike

• How can I talk to a LIVE person here on the dimensions of fixation on a Psd file?  Size and DImensions continue to appear weak, even after changing their sub Image < Image size

  It seems that no matter how many times I change the size of the Image and make Pixel size as large as possible, dimensions appear 4 x 6 for my client.  I downloaded this file Psd layered on DropBox and the document still appears small.  I have expanded the size of the Image in inches, enlarged the dimensions in pixels of the Image, and again, when you use crop tool (in what customer says she used a million times before) it seems that it parts of image design and cultures.  So, what gives?

  I would LOVE you forever if you are able to help me trouble shoot this challenge (not to mention learning it) I am a newbie who couldn't afford to finish school and this is certainly a first.

  You can change the ppi to change the size of the image.

  The dimensions in pixels, ppi and image size are linked together, when you change one, one of the other two must change.

  Here's the formula.

  Inches X ppi = pixels

  The ppi is stored in the metadata so if the file header is corrupt or you use save for web, the ppi could be missing. In this case Photoshop guess of 72 dpi, which would change the size of the image.

  As long as the pixel dimensions has not changed, then there is nothing to fear. Pixel dimensions is the actual data. If the size of the image is incorrect, anyone with most image editing software can change the size of the image or the ppi to fix. Make sure that the pixel dimensions do not change. In Photoshop just uncheck the box resampling.

• a box with "changing browser settings" keeps popping up. Can you please tell me how get rid of it? Thank you

  When I open Firefox the box appears immediately and can only be closed by right clicking on the box down the bottom of the screen and clicking Close. It started happening after the Firefox uninstall & then put it back yesterday. I was able to uninstall completely yesterday, but not today. It cannot delete programs files.

  What security (firewall, antivirus) software do you have?

  Try to start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if that helps and allows to remove the Firefox program folder.

• Change the size of Pope to 8.5 x 11 instead of 8 x 10

  My printer prints 8 X 10 on paper 8.5 x 11.  Result fell material to the right of the page and cut off the lower part of what I need to print.  There is no normal paper size options, only 8 X 10.  How can I get my 6520 recognize paper 8.5 x 11.

  Hi, I'm not find paper size 8.5 x 11 inches and also letter-size on my new HP Deskjet 1000. Please notify.

• try installing thunderbird on a new computer. When I install, I get an installation for an iMAP server. my ISP is a POP-how can I change the type of server?

  I would like to change IMAP to a pop server.

  Maybe this will help.
  https://support.Mozilla.org/en-us/KB/manual-account-configuration? & Mobile = 0

• E-mail accounts changed in IMAP on El capitan

  Hi, I have an old Macbook (2009), and recently I upgraded the operating system of Cougar to El Capitan. Most of the things are works well but Mail causes me problems. I read many others Mail doubts in El Capitan, but my problem seems to be different.

  I have several accounts of my ISP more than one Gmail account, accessible from Mail. The Gmail account is still OK, but none of my ISP accounts will now receive mail, if all will always send. I think that's what happened (even though it sounds crazy).

  Mail seems to have created new IMAP accounts, corresponding to the old POP accounts and transferred all the e-mails stored in these new accounts. But as my ISP uses a POP server, these accounts cannot receive if they can still send. Former POP accounts are still there, empty and inactivated (so I have two of each account, one IMAP, POP). When I've reactivated a that I was able to send and receive from it, provided that incoming mail was responding to an e-mail sent from this POP account. But otherwise, when I just send an email to this address, it is not received, probably because it goes to the new IMAP account.

  Thus, the upgrade of the El Capitan has really drunk much upwards and I don't know why, and I don't know how to fix it. I don't know how to change IMAP accounts toward POP, but I fear that if I close the IMAP accounts I can lose all emails in the reception and sent items box and still not be able to receive emails in pop account.

  Can someone help me understand what's happening please, and how can I get Mail back to how it was before? Thank you.

  Are you sure that your ISP does not offer IMAP service. El Capitan is trying to determine what the most appropriate service and configures Mail accordingly. He "asks" the ISP what to configure. It can offer IMAP, but your accounts are set up for the pop.

  If she didn't really need IMAP, you can then change back to pop. With IMAP, messages remain on the server, so all you have in your Inbox would remain on the server. However, to be sure, create a new mailbox store in the section on my Mac. Move all messages to these mailboxes before removing IMAP accounts.

  When you have reconfigured everything, you can move messages in the mailboxes, you have created and put them in their appropriate accounts pop folders

• Hanging of Thunderbird 38, gel and does not question. 17 accounts pop (Win 8.1, MalwareBytes and Windows Defender)

  Since the update of Thunderbird to 38.* I had nothing but problems with Thunderbird wedging (spinning wheel waiting), a "Mozilla Thunderbird (not answer) ' in the header bar, whiting of window application out and possibly TB box in hell - a small box to appear asking if I want to - close the program, expected so he can resolve itself , or check the internet, then close. I now give the floor it the box to hell (B2H - call it all you want, but I'm cursed every time he pop up!)

  I did everything proposed here and nothing suits. I have used Thunderbird for years with all the same files and Add ons WITHOUT problem. On the first day of the 38 update everything has changed. When Mozilla realizes that it is in the upgrade and find the problem!

  Here is what I tried with nothing working...
  1. I don't have AVG, the only malware bytes and windows defender
  2. it still happens in SafeMode with no active add-on.
  3. I stopped saving function which slows down the frequency of the sinking, but did not eliminate the problem.
  4. I have deleted hundreds of older emails, thinking it was that but who have done nothing.
  5. I changed some accounts of POP at the thought of iMAP that was the problem but nothing has changed.
  6. I made several attempts to patch both Mozilla support and outdoors on the net. Nothing works. Looking at all the people who have the same problems, I have to say that the problem is handling of file. I noticed that as the issue with others who have multi files and emails. The answer is not to reduce these volumes but to understand why thunderbird managed their fine before and what has changed to make the program hang now? Who should be on your end, taken responsibility. Keep us faithful and solve the problem...

  Here are my tips...

  A. I have several files and thousands of e-mails longer and have manged fines, as matter of fact, Thunderbird has been great. Then like a good stooge I approved the moz and did my upgrade to 38. Never had a problem before the upgrade. After the upgrade, everything went to *.

  B. the 38 version upgrade was a big change. When I look in the folder that has been labeled the envoys or Inbox folder (where all emails from each account is collected), all the emails listed would disappear when I moved my mouse over them! Emails disappearing! They were there in records specific e-mail below but not but in the case of head as if it were just a day earlier and with the upgrade. I thought that as an addition on the question and waited for the difficulty that happened not so long ago. Again, which could be a problem of record add-on.

  C. the upgrade to 38 were other issues, but if the madness going no problem was not bad enough, the problem seems to be growing with each ' update or bugfix that followed. Don't hold me to it but I think it was in 38.1.2 or 8 (I think that's it. I wasn't paying attention, but if I had known that I would have to tell it, I will!) That's when hanging interminably long. When the program closed at least I got a project saved, then I read on line that the problem was the registration of open messages, I turned the auto reduction. He did change the frequency of the hanging (white screen pause) and timing (where the B2H appears), but he was always there and always!

  D. I had hoped with 38.2 there will be improvements. Nothing has changed. I didn't know that 38.3 would make this change/fix, but it's not. If I write all this, so you have what I know as a loyal user since 2007.

  E. here is what you need to complete the picture. I'm on a PC running 8.1. on an Intel i7-4770, with 32 GB of ram, now you tell me when you will issue the update to fix the problem! Once again, Mozilla, I suggest you start by looking at how TB 38 manages several emails, files and archives. Not all of us have only one e-mail account. Most of us have been really happy with TB before 38. If you can't find the question, can you show us how to get back to a version prior to 38?

  Thanks for listening and hope that helps!
  @v @.

  
  

• Why do I get the pop-up "Firefox prevented redirection to this page?

  Whenever I am a of my Zynga playing games (Cafeworld) and click apply for help, a pop up comes up saying Firefox prevented the redirect to this page and I have to click "allow" every time. It is very annoying. I can't understand what it takes parameters changed to prevent this pop up. It doesn't have any other game from Zynga.

  Hello

  You can try to uncheck the warn me when Web sites try to redirect or reload the page in Tools (Alt + T) > Options > Advanced > general. Options > Advanced

  Options

• move the cluster for sub vi

  Hello

  I want to spend a cluster that can change its content to one under VI. The cluster does not change by program, but during programming, that is, I could add or remove items in the / cluster. Using direct wire or local variables I would have to change each sub VI that uses the cluster updated the. I also tried the typedefs, but I met the same problem.

  At the same time the Subvi should be able to update the cluster I spent.

  In C++, I use classes like struct (equivalent to the cluster of LV) and pass a pointer to a class object to a function. Within the function, I choose the members of the class I want to use inside this function. If I change the class structure, the functions of the Word are not affected (of couse only as long that I remove irrelevant of class members of the called function).

  Example (from C++):

  settings * param;  'settings' is a class that I use to group variables

  doSomethingUseful (param);

  / * the doSomethingUseful function uses the pointer to parameter and accesses the members of

  Param-> variable1

  Param-> variable2

  ...

  Hereby, I can change the values of variables stored in the param object

  */

  Best,

  Max

  
  

• 'Vista Antispyware 2010 - unregistered Version' unwanted pop ups

  Three windows continually dog pop up my computer and continues to re-pop-up after clicking on them.  It asks me to upgrade to a fully paid-for version Vista Antispyware and that my computer is infected.  The list of the infection continually changes and continues to pop up despite my continual cancellation.  I tried to delete this using Windows Defender, but he advises simply buy Vista Antispyware too.  By clicking on 'remove all' just takes me to a page "buy full version".  I tried many different things but can't stop these pop ups!  What should I do?
  Thanks in advance.

  Hello

  Demarrer start in SafeMode with network - repeatedly, press F8 that you start. Another thing you try is CTRL
  SHIFT ESC - Task Manager - processes tab - and complete the process on the file AV EXE or other people, you can
  determine could be the thief. If you make a mistake just restart, and then you can start over. Times
  These processes are completed if should be easier to remove

  Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
  scams to get you to pay for them while they have no advantage at all.

  How to remove XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  If Malwarebytes refuses to run (or all others here) just go to them in Solution Explorer and
  Right click on the mbam.exe and rename it to something like ZZmbam.exe and then double
  Click on a race there. Do similar to others - rename back when finished.
  (Right click on their icon - line properties - Shortcut tab - target to see where the executable)
  lies and its file name.)

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
  Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
  the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Change BVI subnet on POE 1200 series

  I have a 1200 Series couple I want to find a way to manage remotely. I could go on a plug in a cable, but I just want to know the order of the steps to follow.

  I need to change a vlan existing devices from XX to YY then change the Virgin British Islands up to her also to the AA. The problem I have is that they're POE so when I change the BVI I lose power and they reboot with original settings.

  I thought that the process would be;

  -change the IP BVI so its in the new VLAN YY

  -change of sub interfaces to match

  -change the vlan native on the kernel to match

  The unit stops and restarts before I can finish. Any tips?

  You must put this in config unless you just want to have a basic config.

  Sent by Cisco Support technique iPhone App

• Windows 8 RT does not support POP email? (Problem solved!)

  Please advise whether Microsoft intend to solve this problem? I have no idea why Microsft have such change not supporting email pop. But it's the older technology is still the more popular especially in the commercial world for SMEs around the world.

  Also have an app that support email pop. Google android and IOS it take all support and can implement easily e-mail accounts... Please... Microsoft... We support you, but please, don't make any stupid move to surprise or frighten us...

  Or I did something wrong to put up with POP email, if so, please let me know...

  Thanks in advance,

  Max

  Hi all, I got this problem resolved, and you can refer to my answer below. See you soon!

  Hi everyone who suffers the Surface RT does not support POP e-mail! Now, I found the solution...

  First, you must create and prepare the following three accounts:

  1. your POP email

  2. Gmail account

  3 Hotmail account, such as Hotmail, msn, live, outlook

  Step 1: Connect to Gmail and go in "Settings", then under "Accounts and import", check mail other accounts "with the help of POP". Here you will send all emails to your Gmail then POP.

  Step 2: Log in to Hotmail, then go to 'E-mail settings', then go to "send/receive e-mail from other accounts", then click "Add an e-mail account" to add your Gmail account. After checking it then you can receive all mails sent to your email POP then transfer to Hotmail via Gmail.

  Step 3: then on the same page, click on "add another account to send emails of" to add your email pop account After verifying you can send and answer your e-mail in your POP account.

  Step 4: after all, go to Tablet Surface RT, then configure your mail in Hotmail as normal configuration... and now you can use your POP with Surface RT.

  In any case, I hope that Microsoft next time before making any changes have done sufficient research and think... do not create no matter what obstacle for us as a user. We are not a technical person that we use windows for our daily life and the work... not many people like me would spend time thinking how to solve out and then share it here!

  If my conclusion can help you guy, please give me a simple answer and so I know that my work might help you. Thanks for reading it. See you soon...