Change several Sites in the same way

Similar Questions

• Create a book able to change several pages at the same time later.

  I am new to InDesign (depending on the CS6) and what is probably an easy question.

  I'm creating a catalog/photo book of 6 x 9 with 2 photos per page.  I would like to create by using some sort of template system so that later if I need to change the page layout, I can change the template (for example) move the photo from the top to the top a bit and have * each * photo using this template on every inch of page shot upwards, instead of having to adjust each page by hand (120 pages).

  I can do it in InDesign, and if so, how?

  Thank you.

  Put the graphic frames on a master page. Make adjustments there.

  Bob

• Change the location of several pictures at the same time?

  I see how to change the location of a photo at a time. Is it possible to change the location of several pictures at the same time?

  Thank you

  Phil

  Select the photos and info - enter the location (or any other field of the info) and it is applied to all photos

  This is described in using Photos - a good place to get help with Photos

  View and add information about the photos

  To view or change information for the photos, you select one or more photos, and then open the information window.

  

  • Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.

  • Add or change information: Change the following.
    • Title: Enter a name in the title field.
    • Description: In the Description field, type a caption.
    • Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
    • Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
    • Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
    • Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.

  LN

• I changed my ISP from at & t to time warner cable, I will be able to use firefox in the same way?

  I will be able to use Firefox in the same way after I change my ISP from at & t to time warner cable?

  NoScript is essential. Windows 7 firewall is good. For antivirus, etc., I'm under maximum security from Trend Micro. The price is high, but it usually substantial discounts are available. Some ISPs now offer free versions of Norton or other software, but I don't know about Time Warner.

• I recently bought a used iPhone 6, I was able to reset the phone to factory settings, but unfortunately, the iPhone is still under an other customers Apple ID, is it all the same way I can have this changed?

  I recently bought a used iPhone 6, I was able to reset the phone to factory settings, but unfortunately, the iPhone is still under an other customers Apple ID, is it all the same way I can have this changed?

  Turn off find my iPhone Activation Lock - Apple Support

  contact the person you bought the phone from and their info to remove the lock of the activation.

• Why have all my colors suddenly changed - from white to cream yellow and all the other colors in the same way?

  Why have all my colors suddenly changed - from white to cream yellow and all the other colors in the same way?

  This looks strangely like the good old 'false monitor via Windows Update profile'. If the selector of color shows the cream when it should be white, that's all.

  We won't know until the OP comes back with more information and perhaps a screenshot, but in the meantime (since I'm away from my main system) I can try to locate my standard screenshot of one of the countless other threads I posted it that...

  ah, it's here (last posted barely two weeks in Lightroom):

  

• I've uninstalled and reinstalled the drive several times with the same result, my problem is when I download the drive icons for my browsers and above all my desktop icons change adobe logo, so when I click on them Adobe tries to open them.

  I've uninstalled and reinstalled the drive several times with the same result, my problem is when I download the drive icons for my browsers and changing most of my the desktop icons for the adobe logo, so when I click on them Adobe tries to open them, of course, he does not format because it's not an adobe application , so I tried to restore the computer to an earlier date and it wont let me as long as Adobe reader is installed, so I need to uninstall and now I have nothing to open files and downloads of Adobe, someone had this problem and if so, did you get it resolved? Thank you Tommy...

  This may help: Application, file icons change in Acrobat/Reader icon

• Return of the mistake of MUSE: why do we not have several files with the same name?

  Well - I thought I had all this worked and fixed, but I met the download error 'Why do we have several files with the same name' once again.  (I downloaded all the files several times today in order to 1) works the way it worked the last time and 2) get an OAM file that is not loading for some reason any load again and the download takes about an hour to transfer all the files manually.

  To recap:

  (1) an option "Upload only modified files" returns the 'Muse has encountered an error and closes.  Why do we have several files with the same name? "error just as before.

  (2) a full download will work but takes forever and is NOT a substitution for work changed files option.

  Please advise with possible solutions!

  -Dave

  Is it possible to have two .oam different files in different folders on your computer where the .oam files have the same name? I'm theorizing that there may be a bug in the treatment to ensure the folder created for a .oam placed on the server receives a unique name, particularly in the case of a partial update of the site on the server.

  Please send us the .muse file and all the files in .oam related to [email protected] along with a link to this topic for the context so we can attempt to reproduce this error and isolate the root cause. If files are larger than 20 MB, you'll need to use a service such as Adobe send & Track, Dropbox, creative cloud, WeTransfer, etc. file sharing. Thank you.

• You can crop several pictures at the same time by Lightroom CC?

  You can crop several pictures at the same time by Lightroom CC.  I found a tutorial on YouTube showing how this could be done through the rapid development module in previous versions, but I don't see this option with Lightroom CC.

  You can crop the one the way you like it, then select all the images and click on "Synchronize...". Ensure that harvest is one of the changes that you are synchronizing.

• Is there a script to move several tabs at the same time

  Is there a script or a way of being able to move several tabs at the same time - I need to change the size of a document and all the tabs need to move at the same time - is it possible to do so.  Have several financial sheets should reformat - thank you very much!

  Jjust found a cool script of Shane Stanley moving several tabs in indesign [Archives] - Desktop Publishing Forum that works just the way I want it – here it is:

  say application "Adobe InDesign CC 2014"

  the value theMeas to my doIDdialog()

  set theTabList to tab list of the paragraph 1 of the selection

  set theTabPositions to position of tab stops to paragraph 1 of selection as points

  Repeat with I from 1 to the number items in theTabList

  set the position of the point of theTabList to 'p' i & ((point I of theTabPositions) + theMeas)

  end Repeat

  define tab list some points of selection at theTabList

  end say

  on doIDdialog()

  say application "Adobe InDesign CC 2014"

  the value measUnits to measure horizontal units of view preferences of the document 1

  Try

  destroy each dialog box

  end try

  Set restart to make dialogue with properties {name: "Putting the selection handles"}

  the value C1 to do dialogue column restart

  do static text in C1 with properties {dynamic label: "' amount to move all tabs:" "}

  the value C2 do to column of the dialog box to restart

  the value mComb1 to do measure combobox to C2 with properties {min width: 80, content Edition: '1', big helping hand: 10, nudge: 1, string list: {'-25', '-20', '-15', '-10', '-5', '5', '10', '15', '20', '25'}, change the units: measUnits, value: 1000 maximum, minimum value:-1000}

  activate

  with timeout to 10000 seconds

  Show reboot

  If result = false then

  beep

  Restart to destroy

  Error number-128

  end if

  end timeout

  the value comboMeasNum1 to change value of mComb1

  Restart to destroy

  end say

  return comboMeasNum1

  end doIDdialog

• several objects have the same rollover both State (but the link to different pages)

  Hello

  I have a mac

  I would like to know how I can get several images with the same States of reversal - but who appear both on several images, (but each element having its own binding property applied to this)?

  See image below: I want the two box 'A' of pop with the same State of turning even if I'm hovering on one of the boxes. But I want that each of the boxes to post a link to different pages of my site.

  Ive tried to group the images and moving them to their own layer, but the bearings are not "and" associate on several objects

  Help!

  Thank you

  

  It is not, but you don't need that to get the behavior you described. A1, a trigger will States and the hyperlink you want. On rolling, it will show its rollover State and show its target container that will be directly on top of A2. It will look like a rollover for A2 State. Repeat for A2, B1 and B2 and I think get you the behavior you described. It is simply a different way of approaching the problem (what happens to adapt the tools available in Muse).

• Several versions of the same project AE Premiere Pro crash

  Hello!

  I guess this should be possible, but it seems that I do something wrong.

  I am a first Pro CS5.5 project. This is a tutorial how-not - to the that I use as an example of project to get myself started in CS5.5 AE with the body.

  Now... between the clips I want to first pro to show screens as "Lesson 1: when you don't...' then a video clip, then ' lesson 2: when you... don't ', then another clip video example." Etc...

  However, it would be nice if these screens of text between the two were animated. So I am doing a project in AE called "Lesson1", save it, just to make the text lively between the two.

  Import of the body: nice.

  Now, I would like to make the animation 'lesson 2'. I want he comes alive as in Lesson 1. So I have open project Lesson1, change the text and save it as AE project "Lesson 2. In this way, I don't do any what animation again.

  This would be the way simple, right? Instead of having to copy everything or instead of save settings predefined.

  
  It does not work.

  For some reason any body (even if AE is saved and AE is closed) now words together projects. Lesson1 indicates Lesson2 or Lesson3. It seems that AE projects are registered under different names, organization always check the versions published as an edited version or the original, with the exception of the version I want to show him.

  At some point, this will crash body or AE.

  I'll start trying to make different compositions in the same project, maybe that will work. However, why it works that way?

  Thank you

  Your workflow is a bit wonky. Here's the right way to use the AE projects within a timeline of the Organization:

  1. Select the clips you want to process in After Effects
  2. Right-click on any of the selected clips and select replace with After Effects Composition
  3. AE opens, save the project file, and then change the composition created with Dynamic Link.
  4. Do not close AE.
  5. Repeat for as many clips you need to treat in AE.

  It is always better to end up with an AE project incorporated into a chronology that integrated a lot of AE projects. I guess the crash is a dynamic link is trying to access several projects at the same time. Dynamic links can handle a handful of compositions far better that he can manage a handful of projects in the same timeline.

• Several sprites using the same parameter value

  I'll ask the same question " 'contains' doubt in the hexadecimal color value?" but in a different way, because I realized that the solution is more simple than I thought, and the solutions will also. I have this problem:
  
  property pTargetSprite, pBlendValue
  
  on getPropertyDescriptionList me
  List = [:]
  
  addProp list, #pTargetSprite, [#comment: ' target Sprite: ',]
  [#format: #integer, #default: VOID]
  
  addProp list, #pBlendValue, [#comment: ' mixture value: ",]
  [#format: #integer, #default: 100]
  
  back list
  
  end
  
  
  on mouseDown me
  
  .blend Sprite (pTargetSprite) = pBlendValue
  
  end
  
  I would like to get SEVERAL sprites for 1 parameter, that is to say when the behavior dialog box appears and ask me the "target Sprite:", I entered... Let's say 1, 2, 3,... Regardless of the numbers I want. Therefore, the values of this sprites mix will change according to the mix input value. Right now is perfect, but of course work with only a sprite, but I want to be able to give this value of mixture for several sprites on the same setting.
  
  I guess it must be very simple, but I can't get the answer anywhere in my brain, nor my book Director, or in the forums.
  
  Thank you!!!
  
  

  Rob, Anders... Thank you very much!!! Now it works perfectly.

  spriteList property
  blendValue property

  on getPropertyDescriptionlist
  myPropList = [:]
  myPropList.addProp (#spriteList, [#comment: "enter the sprite channel \])
  (["the numbers to use, separated by commas:", #format: #string, #default: "1,2,3"]).<>
  myPropList.addProp (#blendValue, [#comment: "mixture value:",-])
  ([#format: #integer, #default: 100])
  return myPropList
  end

  on beginSprite me
  spriteList = stringToList (spriteList)
  end

  on stringToList (thisString)
  oldDelim = the itemDelimiter
  itemDelimiter = «»
  thisManyItems = thisString.item.count
  tempList =]
  Repeat with n = 1 to thisManyItems
  tempList.add (thisString.item [n])
  end repeat
  itemDelimiter = oldDelim
  return tempList
  end

  on mouseUp me
  thisMany = spriteList.count
  Repeat with n = 1 to thisMany
  .blend Sprite (value(spriteList[n])) = blendValue
  end repeat
  end

• Highlight one several files at the same time

  I would like to highlight several files to delete at the same time. Through Windows highlight you or click on the first file with the mouse and click on the last file and everything in-between becomes highlighted for deletion. Is there a way to do the same thing with my Mac without clicking on each file individually?

  OS X does not have an iota of code Microsoft Windows. Do not expect that it works in the same way.

  1. You have the choice on OS X. You can click and drag the file icons that you want to remove, then right-click on one of them and select move to trash.
  2. You can select the first icon in the file and then pressing the SHIFT key or order, select the following icons. Then click on any place in the trash.
  3. Step 2, but using the arrow keys for the selection of additional directional file icon.
  4. Combine [1, 2, 3] to add or subtract icons from file.

• Safari address bar showing several addresses at the same time

  Anyone else having problems with the address bar. No work to present frequently visited sites and and after visiting the sites manually or via Favorites addresses are crushed between them (showing several addresses at the same time).

  I have the same problem since this morning, after the EL CAPITAN update