Change style to style input of text Message text Message item in the OPS.

Similar Questions

• Return a value to a field of text using personalization in the OPS

  Hi all
  
  I work in the OPS 12.1.1.
  
  Using customization,.
  My requirement is to perform a function or deteriorated by clicking a button.
  Or it will return a value.
  The value must be within a text field.
  
  Using the customization, I created a button in a seeded page.
  Additional using customization I could meet my requirement.
  
  By clicking the custom button, a value must be place in a sown field.
  
  Please advice.
  
  
  Thanks in advance,
  Roselyne

  Roselyne,

  You need to extend the CO to your needs.

  Call the procedure in section extended controller PFR, catch the event & & set the value in the bean.

  Kind regards
  GYAN

• Not supported input message appears on the monitor

  "Input not supported" message appears on the monitor whenever I try to watch a DVD or video stored on my hard drive

  What could be the cause of the problem? The monitor is an Acer x193w. I got this computer for over a year and I've never been able to watch a DVD in its entirety because after so long as the message arrives and the only way out of the said message is to manually cut the power goes to food. I tried the alternative media such as VLC players to see if it works, but it seems to be something else the cause. This happens only when I run the videos that have a considerable length (20 minutes or more)

  Hi CheerleaderMelissaFan,

  Through my research, I noticed that users with similar problem have solved this problem by changing the screen resolution, I suggest you to change the display resolution and make sure that the refresh rate is adapted to your monitor.

  Follow the steps mentioned in the link below

  Screen resolution-change

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

   

  Change the refresh rate

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  (You can see the documentation for the monitor to the native display resolution and refresh rate)

  Now test to see if the problem is resolved, after back if you have any questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How do you change different styles of some text in a paragraph. Help, please! Pictures included!

  I'm trying to encode the text 'A what know us more about us!' that I surrounded by a paragraph and then tried to change styles, but it does not work. I also try to find a way to shorten the distance between the point up and down. Any help or suggestion?

  I try to do it with the font size of the red text 15 as well as size 12 black text, red text will be a hyperlink to the page he belong to. Black looks more like a description of the link.

  Example:

  (link)About Us(/ link) Learn more about us!

  Photo design I copy what I did in photoshop.
  

  http://gyazo.com/fc3fd682669eb83b1474eb5adbf33064

  My Web site.
  

  http://visualizecontrollers.webege.com/

  If you simply as:

  About us Learn more about us!

  You can assign different styles

  and . Regarding the "distance between the point up and down", try to adjust the margin for

  .

  --

  Kenneth Kawamoto

  http://www.materiaprima.co.UK/

• CS5 file suspended CS6 when you change styles

  Windows 7, InDesign CS6 8.01

  I was working on a file of about 91 pages with plenty of tables in CS5 last week. We have to day at CS6 this week, and the file seems to work very well. I decided that I was not satisfied with the appearance of the tables, so I went the table style, changed lines color fills, and as soon as I clicked on 'Preview' I got the blue spinning circle. Only way out was to complete the program.

  Since then, I tried the following:

  * Change color without previewing (crashes)

  * Import document CS5 in CS6 again, try again (crashes)

  * Open the file in CS5 on another computer (such as it has been uninstalled on mine) and try the same (end)

  * Export out to IDML of CS5 and who import CS6 (very good). Try to change the style (crashes)

  * Try to change the color of a font in a paragraph style (crashes)

  * Try to change the font of a paragraph style (fine)

  Open the CS6 document which was casuing all the evil on another machine with CS6 (is not displayed, then crashes)

  Open the IDML CS5 on the other computer (fine) then try the change in table style (crashes)

  * On the original computer, re - import styles of table from a previous version (fine) then try change (crashes)

  * Reproduce the table style, change the color in the style (thin, but not applied to anything), then delete the original style, replace with a new one (crashes)

  I am at a loss here, because my usual solution of strangeness should go on the IDML road as I thought that rebuilt the file again. Does not seem to want to play at the same time however.

  Any suggestions?

  Thanks for your reply Peter. I had not thought the road to tagged text, probably because I've never had use of tagged text!

  I gave it a go, export the entire embarrassing section in the tag text. Placing them back in a new InDesign document with automatic flow of texts on, I had the same crash/spinny-wheel-causing-me-to-end-task. I tried again, but this time turn off "automatic formatting" and has done page by page, noting that it would break. Next time, I cut out the table that the accident would happen on when I got to it (the accident would happen as soon as I clicked on the output port), stuck on the side, made a note where he went and continued to give the rest of the story without a hitch. I could change the table style in the paper without problem.

  I glued the troublesome rear table, tried to change the style of table and got to the accident. Right, getting somewhere.

  I opened the previous model and put it back in the section who was not at the origin of the problems (all without the dodgy table). I could change the style very well. Then, I made a new document and pasted the wrong table, thinking that it would crash when I went to change the style. However, I could change the style of table very well!

  So, thinking that everything was ok now I copied the table, stuck with the rest, went to change the style and... spinny ball.

  Finally, I converted the table to text pasted into the main document and converted to a table. So far so good. I'll update again if I run into any more problems.

  Realistically, I could put the thing still once in the time it took me to solve this, but I'm a little scared that it happened at all with a document that works very well in CS5!

• Character styles more roll styles of hyperlink text

  It took me a while to understand this. I couldn't have my hyperlink styles to work. Just as an experiment, I've changed the text to none in the character style (I use it styles throughout the site) and my hyperlink styles work properly. I think maybe it would be useful to know that a lot of people seems to post about hyperlinks in text doesn't work does not correctly

  Thanks for posting this Marcy. This problem is a bug known, that our team of engineers is connected.

  To work around the problem, you can select hyperlinks in your text, and remove the applied character style (i.e., change the style of character 'None').

  Best regards

  Corey

• InDesign applies erroneously style to any text character

  Last year, I had been importing text in InDesign with little trouble until that what happens beginning of problem and I cannot understand why.

  Let's say I have a CS3 file with defined character and paragraph styles.

  If I draw a blank text box, InDesign displays the character style "exposing" paragraph style "ext_all" are applied. I choose "Break link to Style", but if I'm importing text in this box, the "Exhibitor" character style is applied.

  The following happens first or not if I created a text box:

  If I import a Word style file, all of the text is available in style 'exposing' until it reaches a word character style.

  If I import a text file that contains the InDesign tag, all text is available in style 'exposing' until it reaches a character tag.

  If I import a rtf file a very simple sentence, all the text is of 'exposing '.

  Anyone run into this? I tried Googling, but impossible to find a discussion about this. Thanks in advance!

  Maybe you inadvertently put these styles as the default values? That will happen if you click on them with nothing selected. For the active document go to the text tool and make sure that there is no active cursor or a block of selected text, then check to see that the character style is set to [none] and paragraph to what you would like to be your default style. Also check the settings in the character and paragraph panels.

  To make sure this is not postpone in any more new documents, if indeed that was the problem, close all documents and repeat the steps above. With no document open your selections become the defaults for all new work until this that changed.

  Peter

• How to change the resolution of the screen when the "input not supported" message after reboot

  I need to change the display resolution to 1600 x 1024 after I changed my 1900 x 1200.
  the problem is,
  the "input not supported" message when I reboot the PC and does not allow me to do anything.
  He presents himself before the logon prompt.
  I restarted to fail safe with the command line with the id of the administrator and was able to change the resolution, but
  He returns to the State ("input not supported" and no prompt connection) after I restart the PC

  Mark,
  Thank you for your help,
  I tried in vain,
  I just used another monitor with a higher resolution, restore the previous resolution and swap the monitor again.

  Kind regards

  Claudio.

• How to change the border style of the list items in the apex

  
  Hi all

  We have created a few items from the selection list in the Apex and ask users to make changes to the border.

  I tried many ways, but he was not able to make changes, some could help me how we can change the border style of list items in Apex. By, the approach has been used by us

  Attributes of the element in the HTML form -> style = "" border: 1px solid #E5E4E2; "" [I speak that way] but no luck.

  Kind regards

  Sheikh tayeb.

  SruthiTamiri wrote:

  Hello

  Please find the details below

  APEX version # 3.2

  Internet Explorer version #7

  Mozilla version 12.0.

  Used theme #Blue

  Topic identification number is #12

  It is not possible to change the appearance of the borders of the selection list in IE7.

  To the borders of all the elements of the selection list style on a page in other browsers, include the following style sheet in the HTML Header page:

  .formlayout select {
    border: 1px solid #E5E4E2;
  }
  

  APEX 3.2 is no longer supported, and IE7 is obsolete. Upgrade to the current version is recommended.

• Add style to large block of text without affecting existing styles within this text

  Hello! First post here.

  I have a long text document which for the most part, has no attached text styles (it was a mistake). However, there are a large number of stylized breast text boxes.

  Is there a way to select all of the text and apply a style to the text without style without affecting the existing styles?

  Doing so by hand by text block text block would take a very long time.

  Any help is greatly appreciated.

  THX!

  Ian

  What do you mean by "text without style? There must be a definition, anyway.

  Like others, [no paragraph Style] and [standard paragraph] are available, too.

  

• How to change Style sheet

  I understand that a Flex to dynamically change the styles is to create several style sheets, and then switch between them.

  How do you do that?

  Alternatively, how do change you a value for a selector style?

  Jerry,

  You can change styles programmically or dyanamically if you like.

  There are a few steps to be implemented.

  1. create your different style sheets and place them in a folder (best practices).

  2. in your browser Flex 'right click' on your style sheets and select "Compiler CSS to SWF" for each of them.

  USAGE EXAMPLE:

  I created a drop down list component and loaded in a collection of static array data provider for

  [Bindable]
  public var acStyles:ArrayCollection = new collection ArrayCollection ([{label: "MaroonStyle", data: "Brown"}, {label: "BlueStyle", data: "blue"}]);

  Then I call this function which is triggered off the coast of the event of 'change' from the drop-down list box.

  private void changeStyles(event:Event):void
  {
  var evtCB:ComboBox = event.currentTarget as ComboBox;
  var stylename:String = evtCB.selectedItem.data;
             
  If (stylename == "blue")
  {
  StyleManager.loadStyleDeclarations('styles/TGStylesAlt.swf',true);
  }
  on the other
  {
  StyleManager.loadStyleDeclarations('styles/TGStyles.swf',true);
  }
  }

  Simple as that.

  Now, of course I you suggested adding a slightly more dynamic situation in the statement "if/else" this encoded version of irreversibly, but should work the same.

  If this helps to mark as answer.

  HTH,

  Kenny Yates

  Post edited by: K.Yates

• apply text styles to chained text frames

  Hello.

  I went 2 blocks of text in order to have 1 text that flows from the first to the second.

  I noticed that now I can't edit or apply new styles of text... is this true?

  Thank you

  You will need to manually select the text if the frames are threaded.

  Bob

• Glossary hotspots change styles

  
  I added a glossary to aid my system and it worked great - then I added hot spots. They worked well, but they trashed some of my styles! Above all, they brought to change from Arial to Times New Roman. When I checked the styles themselves, they looked fine - they are just wrong on the page. This included the breadcrumbs and some title styles. I thought that if I removed all the hot spots and regenerated the glossary, styles would come back, but that didn't happen. No idea how or why this happened, and also how I can change them back? I already decided not to go with the hotspots if they're going to cause this kind of erratic behavior - I can't get enough with Safari and Firefox without breaking my IE (so far) working model.
  
  Thank you
  
  Chris

  I went into the CSS for each section and discovered that the Normal style had been reset from Arial to TNR. I fixed that in each chapter and now it seems fine. If it does again the next time I have regenerate, at least I can fix it in a few minutes!

  Chris

• CSS style for the display text (does not save the State)

  Hello
  
  I just upgraded from APEX to APEX 3.1 3.0 and display text (does not save the State) which I had set to display more by adding style = "color: #658bb1;" font-size: 25; "the field of HTML table attributes for the element.
  
  Since the upgrade, that has been lacking in the font size of the body (12 PT) and I can't seem to be larger.
  
  I tried to use attribute selectors - span [class = display_only] {color: #658bb1; font-size: 25px;}, but this only works in Firefox.
  
  Can anyone help please.
  
  Thanks in advance
  
  Graham.

  Hi Graham,

  I can't see your post exactly what you did!

  I tried your style here: [http://htmldb.oracle.com/pls/otn/f?p=33642:176] and it seems to work ok in IE and FF

  As part of header HTML of my page, I add:

  <style type="text/css">
  .display_only {color: #658bb1; font-size:25px;}
  </style>
  

  Andy

• Facebook watch notification "you have received a new message" instead of the text preview...

  Facebook watch notification 'you have received a new message' instead, the preview of the text... because it did before... I have the chrome browser and Mac OS X Mavericks. Something has changed this week or so because two weeks ago it was beautiful. I read an excerpt of the message right in the notification Center, it was really cool!

  Is someone has the same behavior now?

  Welcome karffe,

  I can see why it is important to be able to see your notifications completely when they arrive and I'll be more than happy to help resolve this.

  On your Mac, in the upper left corner, select the Apple logo and select System Preferences. Once here, select Notifications, then you should see listed Facebook. Click on Facebook and then make sure that the alert style is set to "alerts." This should now give you an overview of what talk notification.

  See you soon