change the AO stream on an event

Similar Questions

• How do you change the time of beginning of event

  Always default event at 17:00 start time. How can I change this.

  It's fast, thank you very much.

• Symbols - how to change the fill color to a mouse event?

  I'm trying to convert HTML Flash animations.

  I have some problems with the symbols of the Edge. As a test, if I create a new symbol of circle I draw and call that the new 'Test' symbol, I then try to change the fill color in a scoring event.

  I tried this:

  Enter the code to be run when the mouse points to the object

  SYM. $("Test") .css ("background-color", "red");

  That, in fact, change the "background color", but NOT the fill color of my symbol. See the example below.

  So then how should I address the symbol 'Test' if I want to change the FILL color is an event like the hover?

  TIA!

  Use:

  sym.getSymbol("Test").$("Ellipse").css ("background-color", "red");

  where "Ellipse" is the element of circle inside the symbol

  HTH,

  Vivekuma

• Change the background color for the postPrint event

  I have a dropdown menu with a solid background (153, 203, 255) color.

  How can I change the color of white for event postPrint?

  Concerning

  Hello

  This is the script I use. Note that you must specify the reference of the user interface for the object type:

  var vName = this.somExpression;
  var fieldObj = xfa.resolveNode(vName + ".ui.#choiceList.border.fill.color"); 
  
  fieldObj.value = "255,255,255"; // white
  /* Check the type of object and change the .ui reference:
  
       Date field =      #dateTimeEdit
       Dropdown =      #choiceList
       Checkbox =      #checkButton
       Text field =      #textEdit
       Numeric field =     #numericEdit
  */ 
  
  Also the object has to have a background colour to start with. 
  
  Hope that helps,
  
  Niall
  

• shows how to create the cluster of refnum user event

  I try to understand and copy this sup - VI, but I have problem in the construction of this cluster of refnum user event, and how to build the local variable?

  

  \

  It looks like your confusion comes from not knowing how to make a group of data, it's an accurate observation?

  To a cluster, you must create an empty cluster and new drag and drop in the cluster. In this case, how to make a refnum of the event, which is the right type of data, you must follow these steps:

  1. Set up the user event create with datatype.
  2. Right-click in the output, and then click on create Constant. This constant is now your refnum of correct data type
  3. Drag the new constant to a cluster to add it to the cluster. This could be within your DataSet defined Type called "Private Events" or another cluster.

  If you change the data type of your event, the wires that connect this event to the cluster of data interrupts the measure where you will have a data type mismatch.

• Lightning: How can I permanently change the event organizer email address when he invited?

  I have two email accounts with Thunderbird; one is the default account from which my emails are sent. However, when you attempt to send an invitation to the event through lightning, my secondary email is displayed in the field of the organizer and it cannot be changed.
  Thank you, in advance, for all the answers.

  Right click on the calendar in the left pane - properties
  Change the e-mail address you like.

• Change the repetition of calendar events

  I've implemented a repetitive event in a CalDAV calendar on my Mac running the latest version of Mac OS X. The event is 'Every day' to a certain date of starting on a certain date to end.

  Now, I want to make sure it's a repetitive event but only Monday through Thursday. I can't invoke the "Edit series" option in the calendar El Capitan application so that I can change the repeated pattern.

  Am I missing something?

  Double-click the next occurrence of the event, and then click the central part containing the date and time. Change the information you want as the game. At some point, we should ask you if you change this event only or all future events.

• Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and i

  Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and intermittent. Help?

  I checked the wifi and changed frequency (new modem, frequency change made no difference). The Board battery seems fine - all updates well. My computer is an iMac (2011), 3.1 GHz Intel Core i5, 8 GB 1333 MHz DDR3, with a new AMD Radeon graphics card. I recently installed a State strong 1 TB SATA drive and fitted with a LaCie Porsche 4 to USB for backup and a 4TB disk storage RAID LaCie drive.

  I'm frustrated, having to come in my computer since my living room every 12 minutes to continue to listen to Spotify on my stereo system.

  My guess is there a bug in the software of sleep in El Capitan, which disrupts his (I've tried different USB ports connect the Audioengine sender and same thing).

  Should I go back to Yosemite?

  Turiteaguy

  First of all, 10.11.3 OSX just came out. Try this.

• Why no event to CHANGE the VALUE?

  LV2013, Win7

  The attached VI does not work the way I expected.  I wonder what can be done.

  My real program (this is not it) has a window with a menu.  You modify alarm settings in this window.

  It uses a menu with NEW, OPEN, REVERT, SAVE and SAVE as.

  I want to offer a word of caution: If you change the file on the screen, then try to REVERT or NEW or OPEN, you get a dialog box that the file is "dirty", i.e. has unsaved changes, and you can cancel and continue nevertheless, or save and move forward. "

  I also want to disable certain menu items if the file is dirty.

  Most of the time, it works very well.  But there's an edge case that I can't do work.

  If you run this program, change the string, then (as the very next thing) click on the FILE MENU, then the menu is not save the file as dirty.

  Even if I have a test 'dirty' right there in the ACTIVATION MENU, and he gets executed before the menu appears, it is not as dirty.

  The menu is so bad, and as soon as you click an action, the action can still see DIRTY as false.

  Now, if you change the string, and then click turn OFF somewhere, the VALUE CHANGE event happens, and she is considered unclean.

  But if you take a file, type something in and immediately, click on the menu (or type ctrl-O) then it is not recognized.

  Any ideas how to get around this problem?

  Before I tell you to turn on the VALUE UPDATES while TYPING, know that it should work on numeric fields, where there is no option.

  
  

• Mass changing the structures of events

  I have a VI in which I am coding a drag and drop events. The front panel has more than 200 indicators and Boolean values in which I want to make it able to accept a decrease from an event drag. My problem is the time it takes to change the structure of the event for all controls, one by one. Does anyone know how to change mass event structures quickly? Unfortunately I can't figure a way to do a drop with references to component event.

  There may be a way to do it using LabVIEW to script to automate the creation of a more complicated case of event.

  But you can try using the user events.  Use of control references tables introduced in a loop For to register for events on each control changing value.  Then you have a case of user event in the structure of the event which manages it.  If you dynamically build your event programmatically while running your VI, rather than do it manually by manipulating the event dialog boxes.

• Change the condition in the structures of the event

  Hi all

  I am a student doing a project. I am very new to labview and I don't really know much of the function in labview. In any case, I have this timer made by using the structure of the event if I'm not mistaken (I downloaded this timer among the post on this forum). This timer will start at 0 sec, count up to 20 years, then stop. So what can I do to change the time of the end of this timer? Let's stop at 50?

  The program is attached. Please please explain or change the program and attached as a response. I tried to understand the help function, but still do not understand.

  I thank very you much in advance!

  Hello

  Thanks for your inquiry. The attached VI uses programming structures: while in the loop, the structure of the event and structure of the case. You'd have to change is in fact the case structure. Before going to, let us go through the different structures. Open the block diagram by going to the Menu bar of the front panel and go to the window-> open diagram.

  

  The while loop resembles a Do loop in text-based programming. It runs until a condition is met. Since the attached VI, it stops running when you click the exit button.

  The event structure is a structure that consists of sous-schemas. The structure meets the interactions with the objects of the front panel. For example, if you click Start or stop in the façade, the structure of the event will be a case that corresponds to this interaction. In the attached VI, the case, which corresponds to the interaction with the button start or stop, called 'Start', 'Stop': change the value. Each box contains an event handling routine.

  Structures of the case are like spending statements in the programming of text. Take a look at the 'Start', 'Stop': value change event. It contains a routine which consists of a box structure. The case structure meets the called Start input terminal (which is in fact the Start button on the front panel). The case structure switches between cases according to this entry. To display the different case just browse the structure of the case by clicking the left and right buttons. There are only two cases: true or false, as the entrance is a Boolean value.

  Now let's take a look at the VI. Take a look at the case "Timeout" of the structure of the event. This is where the change should be made. Change the structure of matter by editing the case. Change the numbers in the structures of the case: ... 20000 to ... 50000 and 20001 at 50001 This should do the trick.

  Kind regards

  Alan Bong

• Event number: graphics update, while changing the setting

  Hello

  Here's the Setup, I am trying to achieve (please, see the scrrenshots below):

  • quadratic equations with 3 parameters a 0 x and l
  • an and x 0 are controlled by sliders whreas l is controlled by the knob, which generates a random value
  • When some of these 3 parameters, graphic changes must be updated

  I realize that VI using the structure of the event, which has 3 cases of the event:

  • timeout
  • changes, x 0 or a l
  • the button updated l

  When one or x 0 change, the concept works perfectly, while the new value l only change indicator, but graphic only is not updated.

  Where I have been deceived.

  Thank you

  Pavel

  

  

  When you change by program a front panel control or indicator, it does not generate an event to change the value.  To get an event to change the value of I, you use the Value property (signage) for me in your Generate I change of value.  Right-click the I indicator, choose Create property Node, choose the Value property (signs), he set to Write and connect the new value of I in.  Note that you do not need to wire in I, himself.

  Bob Schor

• Value change event, be it be programmed to trigger only when the USER changes the value?

  The structure I set up is the following, I have a control in which the user chooses a value when they choose this value, the value change event takes place setting in the device. Then I am bed in unit values and display them in this control via a property node.

  My problem is that whenever I read back a new value in the control, he takes this as a value change event and resets the value within the system, is it possible to make this event don't move when the user changes the value?

  Yes!

  My thoughts are that you use a Value property (signalling) node to display for the control. That will trigger another call to event.

  Use the NO signs of property value node or a local variable.

  Your postal code, if this isn't the case, then we can help you understand what is happening.

• Is it too late to change the preview thumbnails, once the beforeSave event?

  My goal:

  I need to display nonprinting layers in the preview thumbnails of my .indd files. We produce print jobs that will post processing applied to them (thermography and cutouts glued on the printed cardstock). Our .indd files have layers containing images of these post production so that we can determine the alignment and spacing for the final product.

  Here are the graphics are placed in the nonprinting layers so that they do not print. However, InDesign generates the preview thumbnails that do not contain these nonprinting images. It is a problem for us because we can't tell the difference nuanced between soley by their similar indd files preview images.

  My goal is to register somehow these nonprinting layers in the image preview thumbnail.

  What I've done so far:

  I have a startup script which records for the beforeSave and afterSave events. Before that the same it marks all layers not printable are printable (printable property = true). AfterSave event then this cancels by defining these layers to unprintable. I followed what layer was initially not printable adding a moniker the layer name.

  What does not work:

  When I run a script which marks the layers as printable records, then cancels printable changes everything works perfectly. The thumbnail preview is exactly what I want.

  However, when I run as a startup for events script beforeSave/afterSave. this fails:

  • Success: The beforeSave correctly updates the print property, then changes the name of the layer. This is as expected and work well.
  • Success: the afterSave properly resets the property printable and changed the name of the layer. This is as expected and work well.
  • Failed: Thumbnail preview of the file reflects not the printable = real peroperty of affected layers.

  My Question:

  From what I saw above it seems that the preview image is determined before the beforeSave event fires.

  Question 1: Is it true?

  Question 2: How can I assign printable layers properties whenever there is a backup?

  Last resort I could intercept any sequence of keys CTRL + S or the file-> Save menu option and call my original script (as described above). I would avoid this because it is fragile and less elegant.

  Follow the question: can anyone show me what is real workflows for these events? For example what InDesign is then his backup work and at what points it fires events beforeSave and afterSave?

  Follow-up:

  I think I solved the problem. Wow, Adobe, you could do better than that.

  My solution is during the event "beforeSave", create a new textframe object. Fill it with text empty of meaning. Position somewhere predominently on the first page where it will be visible. Then remove the textframe.

  This is apparently enough to ID to render the thumbnail overview. So my entire solution:

  • In a beforeSave event
    • change my "unprintable" layers to print.
    • Then, create textframe, add text, place it in the middle of the page, and then remove it
  • AfterSave event
    • change diapers updated back to "unprintable".

  As stupid and hacky because it seems to me, it seems to work on ID CS6 for Windows.

• Change the number of times that IOM to the attempts at reconciliation failed events

  Hi guys,.
  
  Is anyway to change the number of times that IOM attempts at reconciliation failed events. According to my survey, the default value is 5 times - see RECON_EVENTS. RE_CURR_RETRY_CNT. In my case, I need to increase this value. Any suggestions?

  Each xml attribute maxRetryCount a Recon profile, you can change this changes according to your need.
  Thanks Deepak