Change the audio source

Similar Questions

• How can I change the audio device automatically between exits?

  Original title: Dual monitor mode

  I am currently running Windows 7 Home Premium 64-bit with Media Center and my hardware is Inter Core 2 Quad with NVIDIA GEFORCE 9800GT and an integrated Hauppauge WinTV HVR-1800 ATSC/QAM.

  I have two DVI-HDMI, one output to my monitor 24 "HD and one for my 42 '' HDTV and computer speaker are connected to the SPEAKER OUT behind the computer.

  The problem is when I look at Internet TV through my computer on my HDTV, I need everytimes switch my Default Sound Source of speakers to the HDMI OUTPUT in my-> hardware & sound control panel and market back when I want to use my computer.

  Someone knows how to fix this?

  Hello, DuFF1

  You can have only one default device.

  It is not possible to put two devices by default, nor is it possible to configure the output in default Media Center device. You can try searching for additional Media Center change the audio device by default or continue editing the device default manually before watching TV on the Internet.

  You can leave your comments on the following link:http://mymfe.microsoft.com/Windows%207/Feedback.aspx?formID=195

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to change the audio output for the metronome

  Hello

  I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

  I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

  I tried to follow the instructions of the Manual:

  Change the audio output for the sound of the metronome

  1. Choose the MainStage > Preferences > General.
  2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

  PROBLEM

  1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

  2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

  3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

  Rant on (its been a long day)

  Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

  Thanks in advance for all advice and my apologies for my frustration. JM

  To access the output audio, you need an audio interface with several outputs.

• How can I change the audio track on netflix

  I have the new Apple tv 4. How can I change the audio track on netflix?

  Setup of the Apple tv has been replaced by the language I want but Netflix ignores this.

  Thanks in advance

  If the film has a choice of audio tracks, you should be able to slide down while the film is presented, then select audio in menus that appear.

• Media Player when I go to burn my songs it says data instead of CD disc. How can I change the audio disc?

  When I go to burn my songs it says data instead of CD disc. How can I change the audio disc?

  original title: Media Player

  Just a thought...

  Well, click on the burn tab should open a menu where you can select any Audio CD or data CD.

• Change the audio level of many clips in the browser?

  I have 1000 or more clips in these images of GoPro project, cameras, and selects music, with many clips that have audio very strong especially the GoPro mounted on the vehicles off the road as they motor at high speed through obstacles. My edit in place includes 20/20 speakers, and even though I have a moderate level of audio that is configured for editing when I select images in the browser that has strong audio I need to stop and lower this clip in the browser at once and he eats a precious time.

  Is it possible to change the audio level in many clips selected in the browser?

  Select the clips.

  Go to the Clip > Audio Options > Audio Gain

  When the Gain Audio pane opens, set Adjust Gain of: -12

  

  Click OK. You can experiment on a clip or two to see if this gain reduction is too much or not enough for you.

  MtD

• Change the Audio sampling frequency - post audio recording

  Hello

  Is it possible to change the audio to 2oKHz sampling rate after I taped audio? Is currently 44,10 KHz

  Thank you kindly

  Ali

  I just found this today...

  Under "Publish"-> click on the 'more' (button)->-> "Audio" and finally, select an option under "Bitrate:' '.

  Bitrate (128 Kbps) CD

  Near bitrate (96 kbps) CD

  FM Bitrate (64 Kbps)

  Custom bitrate (slider that starts at 32)

  I changed a course of 68 slides in near CD Bitrate to FM BItrate and size of published file dropped to 50 311 KB 93 288 KB.

• Change the data source in my ApplicationModule

  Studio Edition Version 11.1.1.3.0
  
  I have the following problem:
  in WLS 10.3 I've defined three global DataSource (or several)
  
  and I have only a single ApplicationModule. Can I change the data source in my ApplicationModule (by code)?
  
  THX Thomas

  Envoy

• Change the audio output to hdmi

  I have an hdmi cable connected between my HDTV and my dell xps m1330, I can get the video to transfer very well but can't do the sound of the game through television. I looked on the internet for how do to it and theres a lot of instructions for vista / w7, but I can not understand how to change the HDMI audio output in windows xp.

  Hi ccmcmill12,

  Follow the below mentioned steps and check the results:

  a. click on the button 'start '.

  b. click on 'control panel '.

  c. with the control to the "Control Panel Home" Panel, click on 'hardware and sound '.

  d. where it says 'Sound' in green letters, there are three options below that are in blue, click on "manage Audio devices.

  e. This will bring up a window titled "Sound".

  f. on the tab 'Read', he has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.

  g. There should now be a checkmark on this option.

  h. the sound should play through your HDMI connections to the TV.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Change the audio output default usb headset speaker 3000 Microsoft livecaht

  Yesterday, when I ran my Rosetta Stone language software that I heard noise coming from my newly installed Microsoft Live Chat 3000 USB headset, today, when I run the software, the microphone still works. But the sound comes through the speakers of the laptop. I looked through Windows and cannot find a place to tell windows to use the headphones to the audio output.

  I saw a similar problem on this site and followed the recommendation to remove the Chuck and download the latest driver on your part and re - install but still the sound comes through the computer speakers.

  Can my children re-configured something but he does not confess to it. But I do not understand why remove then re-loading the drivers does not work. I use Windows XP SP3 entirely under license and updates.

  I have them just a couple of days ago take their back and try something else?

  Thank you

  Try Control Panel, sound, properties, change the headset speakers, also, R.click

  the President of the clock opens, properties, adjust.

• Impossible to change the audio settings

  Original title: audio problem

  IM using a dell laptop inspiron with one slot for my audio. He used to give me options each time I insert headphone or speaker, etc. now, I inserted the headphones, but I am not heard by cogamers, unlike before. I disabled the prompt where it shows me options so now I can't seem to change the setting when I use my headphones because my last choice was out of the speaker.

  Please help me how can I find the option that offers me choices whenever I have insert audio output device.

  Thank you.

  Hi John,.

  Please contact Microsoft Community. I've surely you will help solve this problem.

  To better understand the issue, I would like to know what is the number of the model of the laptop?

  This problem could occur due to incorrect settings.

  Try the steps listed here:

  Method 1:

  I suggest to run the troubleshooter and check if that helps.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2:

  I suggest you to make sure that the default audio device is properly set.

  a. click on the Start button and click on Panel.

  b. type Sound in the Search box and click on sound.

  c. click on the reading tab.

  d. right-click on the headphones , and then select set as default device.

  e. click apply and then click Ok.

  See the article for more information.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Change the ImageView source in C++

  Hi guys

  I'm trying to edit an ImageView in C++ source

  I first link QML and C++, can I change the source as in the reference Images

  toplogo = root->findChild ("toplogo");

  toplogo-> setImageSource(QUrl("assets/images/logo.png"));

  The image exists, however, the program crashes and the log indicates that there is no source.

  I tried QUrl errors for different combinations of URL of the image of logging:

  qDebug()< "error="" url:"=""><>
  qDebug()< "error="" url:"=""><>
  qDebug()< "error="" url:"=""><>
  qDebug()< "error="" url:"=""><>
  qDebug()< "error="" url:"=""><>
  qDebug()< "error="" url:"=""><>
  qDebug()< "error="" url:"=""><>
  qDebug()< "error="" url:"=""><>

  But the newspaper still prints for all attempts:

  URL ERROR: ' invalid URL 'asset:///images/logoideas.png' ":" '.

  Any ideas would be appreciated.

  Pepe

  You must use the property objectName (not the id property) > please see my post above

  in QML

  ImageView {}
  objectName: "'toplogo" "

  }

   

   toplogo-> setImageSource (QUrl("asset:///images/logoideas.png"));)<- app="" crashes="">

  It hangs here probably topLogo is NULL

  If {(topLogo)

   toplogo-> setImageSource (QUrl("asset:///images/logoideas.png"));)

  }

• How to change the audio output of the application in Windows 7

  I just hate how I connect my headset on my computer, which already pregnant pluged in, and do not receive the sounds in my helmet. I have to turn off the app in order to change the sound. No, the change in default device will not help.  It works for some applications. some of these changes but some apps don't change at all... someone help me?

  PS DO NOT post anything about changing default to please, he's NOT working,.

  Hello

  Welcome to Microsoft Community and thank you for the query display. Looks like you're trying to workflow applications to use a specific audio.

  That this issue is related to streaming music from a particular application of a particular audio output, I would say that you post the question in this forum and check:

  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/threads

  For more information, visit these links:

  What's new for the Core Audio API in Windows 7

  http://msdn.Microsoft.com/en-us/library/dd756612 (vs.85) .aspx

  Flow routing

  http://msdn.Microsoft.com/en-us/library/dd756610 (v = vs. 85) .aspx

  Hope this information helps. If you have other issues with Windows do not hesitate to post here at Microsoft Community and we would be happy to help you.

• OBIEE Mapviewer 11.1.1.7.1 cannot change the data source

  Hi all

  I am trying to configure mapviewer on our environment and after

  by clicking on configuration

  Add the DB details

  Save & Restart is updated the file xml but not displayed on the data source tab.

  But where as the other details of DB, I am able to add without problem, then if I click on change by selecting the data source to add/edit the details required to DB I get following error.

  Source of data editing is not yet supported. However, you can delete and re-create it with the new settings.

  and on the Management tab is not showing me any option to add the new source of data manually.

  someone has encountered this problem before. TIA

  Maybe the connection details are wrong, you see something in the Map Viewer logs files?

  under FMW_HOME/Oracle_BI1/bifoundation/jee/mapviewer.ear/web.war/WEB-INF/log/mapviewer.log

• dynamically change the video source flv to flv play back...

  Dear friends,

  IAM trying to load flv files in flash using flvplayerback components. IAM using the following code. Initially, iam loadign video1.flv. So I want to load video2.flv when I press the next button. It loads video2 only when I press the next button after completing the full video1. I want to change the source at any time please tell the right way.

  Import fl.video.VideoProgressEvent;
  Import fl.video.VideoEvent;
  PLR.source = "video1.flv";

  
  plr.addEventListener (VideoProgressEvent.PROGRESS, showmsg);
  function showmsg(event:ProgressEvent) {}
  If (plr.bytesTotal == plr.bytesLoaded) {}
  trace ("Loaded");
  loaderpic. Visible = false;
  }
  }

  plr.addEventListener (VideoEvent.COMPLETE, complete);
  function comple(event:VideoEvent) {}
  trace ("film completed");
  }

  nxt.addEventListener (MouseEvent.CLICK, nxtclick);
  function nxtclick(event:MouseEvent) {}
  PLR. Stop();
  PLR.source = "video2.flv";
  PLR. Play();
  }

  Thanks in advance,

  Syed Abdul Rahim

  The code that show you works fine for me when I put things up to match.  When the button is clicked the first video is stopped and another replaces it.  Maybe you have another code that interferes.