dynamically change the video source flv to flv play back...

Similar Questions

• Change the video source (even video but better quality)?

  Is it possible to change the video from the source of a project with another video which is exactly the same (same fps, same proportions, same time) video, but with better resolution, where all the changes on the last video source will remain on the new video source?

  My situation is that I found a version 720 p 480 p video, I worked (long) with.

  As Jim said, you can do outdoors.

  Sometimes we run with proxy support and who in the Proxy file with the quality full folder native (or ProRes).  You can either share the folder names, move files or in Premiere Pro, you can take the files offline then back online by right-clicking and choose reconnect media.

  This is the easiest part

  If you've been editing on a timeline of 480 p, then through 720 p images bringing you either have to change the settings for the sequence (you can also create a new sequence with the right settings, then copy/paste) or you need to tell Premiere Pro videos 720 p to 480 p sequence size nationwide.

• change the video source on the fly

  something like this:

  private function micChanged(event:Event):void
                 {
                      
                      audioPub.stop();
                      audioPub.microphoneManager.micIndex = micSelection.selectedIndex;
                      audioPub.publish();
                 }
  

  but it doesn't work...

  Hello

  You may need to wait that the stream has been removed i.e. listen event StreamEvent.STREAM_DELETE in the audio editor and after that set the Manager of the microphone and then you post.

  Do you use multiple microphones/cameras?

  Thank you

  Hironmay Basu

• How can I change the video memory on a Fujitsu laptop?

  Hello! I am a Fujitsu AH531 laptop user, and I'm trying to change the video memory settings in use. I have access to the BIOS, which is a Phoenix Tiano, and advanced settings to change my memory Intel HD Graphics 3000 64 MB to 128 MB could not be found. Any advice?

  Intel HD3000 graphics memory is allocated dynamically. I understand that there is no real dedicated VRAM. The mfg of the portable allocates a base amount of system RAM in common with the graphical part of the processor. In your case it's 64MB, but for some, it's as little as 32 MB and other 128MB, but the end result is much the same as more system RAM is allocated according to the needs.
  If there is a way to change the RAM RB you better ask on the forums of Fujitsu.

  Apparently, some people use 'batch' files to help with game performance, this is something that you may want to search each game uses a different file.

  More information-
  Specs Intel HD3000 and landmarks-

  http://www.Intel.com/support/graphics/sb/CS-029090.htm

  .

• Get the video source variable?

  Hello

  I was hoping someone could help me please with the following:

  Currently, I work in a project of edge:

  VID.html (' < the video id = "video1" video width = "970" height = "421" src = "media/video.mp4" type = "video/mp4" < / video > ');

  My next question is how to get the viceo source via a javascript variable?

  Menno

  Hello

  You can select the video with id tag and change of video using the src attribute.

  SYM. $(' #video1' "") .attr ("src") ==> return video source.

  SYM. $(' #video1' "") .attr ("src", "media/newVideo.mp4") ==> it resets the video source.

• I am not able to change the video quality for you tube. There are only two options 360 and Auto. Please help me.

  Hi I am experiencing strange problem for 15 to 20 days and I am not able to change the video quality for you tube. There are only two options 360 and Auto. Help me please if you can because I have a slow internet connection and I want to play video at 240, as it was before. Thanks in advance for your help.

  Could check you whether YouTube is to serve its HTML5 player or the player based on Flash? If you right click on the drive, short a context menu should appear. If the full Firefox context menu is displayed, press and release the ALT key to erase that. The last line of the menu short usually indicates which player he is.

  I'll assume HTML5 because...

  On Windows 7, Firefox should show a wide range of formats in the HTML5 player. However, if some of the features of media are disabled, preventing video MP4 decoding, then YouTube offers only 360 p (with WebM coding).

  If you have intentionally disabled Media Foundation and/or DirectShow in topic: config, then perhaps you would prefer to use the YouTube Flash Player? There are a few Add-ons that can force YouTube to serve you a Flash drive. Either of them will do, you don't need both:

  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-video-player/
  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-Player/

• Impossible to change the video quality YouTube app when using cellular data?

  Basically, when I'm on my data (AT & T) and decided to watch a video automatically plays it at 1080 but it burns my fast data. I tried to change through the video, these three points there and says unavailable. I go into settings YouTube app and I don't have any options to change the right quality quality upload. But I noticed on Android users that they have options to change the quality. I'm looking forward on Google but I don't get the option in the settings, I get even the left menu. Yes my YouTube app updated.

  http://www.howtoisolve.com/how-to-set-video-quality-for-all-video-in-YouTube-IPH one.

  Yes, the iOS YouTube app don't gives you the option to change the video quality over a cellular network. Try to open YouTube in Safari browser

• Can I change the video card in the Portege M700?

  I recently received a Portege M700 as a gift and I didn't really like the Intel supplied with the laptop video card. If I want to change the video card to a more adapted to more modern games. Something like an nVidia or ATi video card. I don't think it's possible, but if this is the case, could someone answer?

  Thanks in advance.

  > On the other hand, it is possible to change the whole motherboard, and if it is possible, it would cost a lot?
  The replacement of the motherboard is possible, but it can be replaced with the same card published by Toshiba for this series of laptop.
  In addition, the replacement of the motherboard is a costly business because the mobo is one of the expensive laptop parts

• Satellite A300d-156 - to change the video card

  Hello!

  I have Toshiba Satellite A300d-156. An ATI Mobility Radeon HD 3650 video card is dead.
  I want to change the video card, but I don't know her size.
  I found this on ebay:

  http://www.eBay.com/ITM/new-ATI-Mobility-Radeon-VGA-card-HD-3650-1gb-MXM-II-DDR2-128bit-VG-86M06-006-/281105229716?PT=AU_Components&hash=item41732d6794

  Is it compatible with my laptop? Help, please!

  Sorry, but man I must say: forget it.
  You can't go to the graphics chip. It will not work and the BIOS would not accept.

  In your case, you will need to replace the motherboard. :(, cela peut être une affaire très coûteuse...) You know

• Satellite L300-110 - can I change the video card?

  Is there a chance to change the video card in my laptop Toshiba L300-110? I have 2 GB of RAM and 160 HARD drive.
  Thanx

  Hello!

  No, you can t change the video card because it s soldered onto the motherboard.

  For more details, see this link from Toshiba:
  http://195.182.196.33/KB0/FAQ7A01ZW0007R01.htm

  Good bye

• Dynamically change the number of sub-panels

  Hello

  I have a computer where usually 4 testplaces of production are connected to.

  I want to have a main VI indicating the status of the 4 different testplaces, that I can do with 4 separate sub-panels - no problem.

  The issue is that I would be flexible in testplaces how I show in a program (as this hole thing is pretty cool, and I expect that some changes will come). Is it possible to dynamically change the number of sub-panels displayed (other that make it twenty of them and turning off then those you don't need)?

  My first idea was to place the school in a table, but unfurtunately is not possible.

  Best regards

  Frank

  Yamaeda wrote:

  The POP in separate windows, and you can have as much as you want.

  Or make separate them windows, and then set up a child-parent relationship in Windows, it seems as if it was all about a user interface.

  http://screencast.com/t/P9SJ1anR

  It's nice enough for the demo beta like software, but works.

  https://lavag.org/topic/17046-multi-panel-interface/

• Dynamically change the path of the report

  Is it possible to dynamically change the path where reports are saved. TestStand 4.1.1

  Glennjammin,

  You can set a path to the specific report for any sequence that you run via the entry points of process model using the reminder of your sequence ReportOptions. It will allow you to change the current settings in the Options report (including the path) for the execution of this sequence. This allows each of your sequences have unique report options.

  If I understand your question, you want to do is exactly what is meant recall ReportOptions.

  -Jack

• Dynamically change the language in cvi

  Hello

  I would like to know if it is possible to dynamically change the IUR in English language to Russian?

  I have a program written in cvi and I need to be able to scwitch English to Russian UI when the user clicks a button...

  Thanks in advance

  Yes: You must create a resource of language of the dossier and can then use the LoadLocalizedPanel / LocalizePanel and LoadLocalizedMenuBar / LocalizeMenuBar

• In Windows Media Player, I can't change the video settings hue, brightness, saturation or contrast.

  Original title: windows MediaPlayer.

  In Media Player, I can't change the video settings hue, brightness, saturation or contrast.  When I try to do it by dragging the indicators, they return to their neutral settings when I release the mouse cursor.

  Hi jxw2,

  1. what version of Windows Media Player do you use?

  2. don't you make changes on the computer before this problem?

  If you use Windows Media Player 10 or later version, you can uninstall Windows Media Player. If the problem persists, reinstall then it & check.

  If you have Windows Media Player 11 is installed, you can follow this link.

  How to uninstall Windows Media Player 11 in Windows XP?

  To download Windows Media Player 10, refer to this link: http://www.microsoft.com/download/en/details.aspx?id=20426

  To download Windows Media Player 11, refer to this link: http://www.microsoft.com/download/en/details.aspx?id=8163

  Hope the helps of information.
  Please post back and we do know.

• dynamically change the HomeScreen application title

  Hi all

  As you know, we can dynamically change the application ICON on the home screen,

  what I want to know how to change the title of the application on the home screen.

  I mean when the user foucs on my application, text will appear on the screen.

  When I change an ICON, I want that the text will be changed according to the new icon.

  Is this possible?

  Thank you.

  Try the HomeScreen class - see the documentation of the api for HomeScreen.setName)