Change the color of an object with blur

Similar Questions

• Change the color of an object

  Very unsuccessfully tried to change the color of an object:

  My simple approach was:

  A BMP format color is black and I want to change in Royal Blue

  var myobject = MyDoc.GetNamedObject (Constants.FO_PgfFmt, "Heading 3")

  MyObject. Color.Name = "blue";

  alert (myobject. Color.Name) / / the color is always black

  I also tried:

  var mycolorprops is myobject. Color.GetProps)

  var i = GetPropIndex (myobject. Color, constant. (Name)

  mycolorprops [i].propVal.ival = Constants.FV_COLOR_ROYALBLUE

  or

  . propVal.sval mycolorprops [i] = 'Royal Blue '.

  If I can solve it for the color, then I'll be able to work with all other orders that involve properties.

  Hi Bob, here's basically how it's done:

  #target framemaker
  
  var doc = app.ActiveDoc;
  
  // Get the required objects.
  var pgfFmt = doc.GetNamedPgfFmt ("Heading1");
  var color = doc.GetNamedColor ("Red");
  
  // Apply the color object to the paragraph format.
  pgfFmt.Color = color;
  
  alert (pgfFmt.Color.Name);
  

  One thing to know: this only changes the color to the paragraph format, but it does not have the equivalent of an update all in the paragraph Designer. You should always pass by and apply the paragraph format updated (or color) to any paragraphs containing the tag with this format.

  Rick

• I'm trying to follow the video to "Change color" and I don't have a lot of options that uses the presenter.  I'm on a PC.  Can someone walk me by changing the color of an object step by step?

  I'm trying to follow the video to "Change color" and I don't have a lot of options that uses the presenter.  I'm on a PC.  Can someone walk me by changing the color of an object step by step?

  Sorry for the delay. Here is the video

• Is it possible to change the scale of an object with parallax scrolling in Muse?

  Is it possible to change the scale of an object with parallax scrolling in Muse?

  Hi Cashmoneydonuts,

  You can create an animation for it using edge animate and add it to the Muse.

  The following link might be useful:

  Brighten up the Adobe Muse CC sites with animation effects. Inspired by Adobe Magazine

  Concerning

  Sonam

• Action to change the border color changes the color of full object instead

  Whenever I try to do an action in which I change the color of the border, the action is not the way that I save it. Instead to change the border color, as I did in the record, the action changes the color of the whole object (for the color that I have saved) and leaves the border to be black.

  Ok. I think that actions make a difference between the stroke and fill. If you have an action to apply a swatch/color, it will apply this color to everything you have 'face' (look at your tool palette: fill overlaps the race?).

  to get what you want, you may need to make a graphic with the fill color style, as you want and use the action to apply instead of the shade.

• Change the color of an object generated in AS3

  I want to change the color of the square, which is an object having paved the square (Square is a place in my library). I tried various methods, but I can't use something like 'square.colortransform.color =' because it returns the error that square is not a good thing. What is happening is that I spawn a place initially, and the user clicks on the site when they click on it, it changes places, but also the color, but I can't find a way to do this. I tried beginFill and colorTransform.

  Here is my code for my Square.as class, which is where I'm sure I should change color with each click of the place:

  package 
  {
      import flash.geom.ColorTransform;
      import flash.display.MovieClip;
      public class Square extends MovieClip
      {
          var score:Number = 0;
          public var square_x:Number;
          public var square_y:Number;
          public var square_height:Number = 0;
          public function Square()
          {
  
              height = Math.round(Math.random() * 160 + 50);
              width = height;
              square_height = height;
              square_x = Math.round(Math.random() * 385 + (width / 2));
              square_y = Math.round(Math.random() * 700 + (height / 2));
              x = square_x;
              y = square_y;
              trace("X:" + x, "Y:" + y, "Height and Width:" + height);
          }
  
          public function changeParameters():void //I would change colors within this function
          {
  
              trace("Object Clicked");
              height = Math.round(Math.random() * 160 + 50);
              width = height;
              square_x = Math.round(Math.random() * 385 + (width / 2));
              square_y = Math.round(Math.random() * 655 + (height / 2));
              if (square_x + (width/2) > 480)
              {
                  edgeCorrect();
                  square_x = square_x - 25;
              }
              if (square_y + (height/2) >750)
              {
                  edgeCorrect();
                  square_y = square_y - 25;
              }
              if (square_x + (width/2) > 480)
              {
                  edgeCorrect();
                  square_x = square_x - 25;
              }
              if (square_y + (height/2) >750)
              {
                  edgeCorrect();
                  square_y = square_y - 25;
              }
              x = square_x;
              y = square_y;
              score = score + 1;
              trace(score);
          }
  
          public function edgeCorrect():void
          {
  
              if (square_x + (width/2) > 480)
              {
                  square_x = square_x - 10;
              }
              if (square_y + (height/2) >750)
              {
                  square_y = square_y - 10;
              }
              if (x + (width/2) > 480)
              {
                  x = x - 10;
              }
              if (y + (height/2) >750)
              {
                  y = y - 10;
              }
  
          }
          
  
      }
  };
  

  Have you tried to make the object square a movieclip with different colors in different settings?  That would be an option.

  How to assign a color transformation is more complicated than just the line you mentioned...

  var myColor:ColorTransform = square.transform.colorTransform;

  myColor.color = 0x0000ff;

  square.transform.colorTransform = myColor;

• Change the color of an object inside the svg image?

  Hello

  I would like to draw an animal with several fill colors, but creating a different image for each color does not seem reasonable. It would then be possible to change the color of the image with the help of code svg.

  I found the following:

  http://StackOverflow.com/questions/11978995/how-to-change-color-of-SVG-image-using-CSS-jqu ery-svg-image-replacement

  or

  http://Keith-wood.name/SVG.html

  But I get an error of installation with two options - mad.

  Maybe someone here can create an example on how to change the color of the svg image added in stage with a click of a button?

  Thank you

  This is an optimized version (less code and navigation): file attached.

  About 1.

  What functions are you talking about [. createRect(),. changeImages(),. colorizeParts()]?

  These functions: what is stopped? What place?

  A function is a single task. You have a task list?

  About 2.

  21. you can hide and see the mouth open or closed mouth.

  22. you can use many features of jQuery:.css(z-index) or before(), after(). Maybe,. map().

• feel very stupid, but I can't change the color of an object

  OK, I was just a little project of design that would have the side effect of having to become familiar with illustrator. It was OK so far but I encountered a strange problem. Here (probably too much detail) the situation (I write in detail so much because I don't really have an idea what I'm doing and it's quite possible that I created my problem by doing something wrong along the way...)

  I'm working on a design for a t-shirt which must include a certain logo, an acorn. I have the Glans in a pdf document and imported into illustrator very well. I was able to play with it and changed its color a couple of times. I worked on my design and finally opted for what I was going to do - I have essentially created a flower pattern by repeating the Glans in a circle, turning by 30 degrees each time. I did when pasting the Glans on the artboard, then turning, sticking in my flower, then paste another copy on board graphics, turning, by pasting in the flower, etc... you get the picture. so now I have my Glans-flower. but I decided I want to change the color of the Acorns to red, and when I try to do it at all the individual acorns in my design, or do the whole tassel flower when it has been grouped, one of 2 things happens, according to what the color button, I press: either the whole area around each Acorn fills completely red, the transfer on the Glans and leaving me with a lot of red rectangles , or the lines in the Acorn change red color, but the grid of the rectangle around it (which are not normally visible) appear and become red too!

  I've done this wrong all? any ideas, to share again?

  Thanks in advance

  h

  Try this with the direct Selection tool, double-click the Glans to implement the isolation mode and with the Glans even now, try to fill, select direct selection tool?

• Change the color of several objects

  Hi all

  I wrote code that continually adjusts the color of a clip of specialties using a color object called "myColor" and an object called "colTransform" to adjust the color of a film called "myClip":

  creates the color object and connects it to film

  myColor = new Color (myClip);

  creates the object that dictates the color setting

  colTransform = new Object();

  Adjusts the object

  colTransform.ra = 60;

  colTransform.ga = 80;

  colTransform.ba = 100;

  colTransform.rb = 0;

  colTransform.gb = 105;

  colTransform.bb = 255;

  apply color to colTransform values to color the object

  myColour.setTransform (colTransform);

  It works fine, but I now want to put a number of films on the same values. Is there a way to define a color to more of a movie object? My tests indicate that a color object cannot be set for a film at the time, although it can be given to another clip and the color transformation applied to the second object:

  myColor = new Color (myClip1);

  myColour.setTransform (colTransform);

  color object resets to the second clip

  myColor = new Color (myClip2);

  myColour.setTransform (colTransform)

  I could also write a loop that traverses a number of objects and apply color changes to each in turn, but I'm looking for a simpler solution - is there a way to do this?

  You can do all the objects, you want color, children of the same parent at the same time and apply a color change to parent.

  PS you have a typing error in your code: myColor isn't Woodline

• How to change the color of an object without losing its detail?

  Hi all

  I get by creating most of the time the artwork for my ad in photoshop, my finished product is always good, but I'm not an expert by any means.

  Currently, I am in need a yellow real estate sign post... all sock images that I can find to buy are white. I'm sure that there is a way to fix it, but I'm coming without the required knowledge...

  Starting with an image like this:

  [IMG] http://i1043.Photobucket.com/albums/B439/just_luc/Firefox%20Uploads/stock-vector-for-sale-Signe-vecteur-1.jpg [/IMG]

  (And before everyone says anything yes I know this is proof... I fully intend to purchase the image once I determin I'll be able to use it for my needs.)

  I tried just using the paint bucket tool in the color I need:

  [IMG] http://i1043.Photobucket.com/albums/B439/just_luc/Firefox%20Uploads/test.jpg [/IMG]

  If I spend a little time I can obviously do a better job, filling all space missed, but the image loses the grain of wood and other details...

  Is there a better way to do this?

  As always with Photoshop, there are several ways to achieve this.

  One method would be to select the woodwork in the Panel (see below) and to promote this selection into a new layer Ctrl (or cmd on a Mac) + J

  Then select the layer effects (by clicking on the button fx at the bottom of the layers panel.

  Then select color overlay

  Choose the color that you want to

  Then play with the blend mode (you will probably find that multiply or color will work better - but have a play).

  To select the woodwork, you can use a number of methods, including the following:

  Use the pen tool and then convert the path to a selection

  Go to the menu select, then select color range

  Use the quick selection

  There are other ways (do a search to make selections in Google)

  Another method would be to create an empty layer above the layer that has the Panel and then (on this layer) with the paint brush tool on the Panel with the color you want. If you multiply or the selected color in the blend mode, you can keep all the texture of the original image.

  As I said there are probably at least another 99 ways to do it - the above is only a few suggestions.

  I suggest that you have a good game and see what happens.

  Any clarification - then just after again.

  See you soon

  John

• Change the color of the objects on the film

  For a project I'm working on, I need to be able to change the color of the objects individually. A person moves into the shot, and I wish that some objects in the street to change color as it passes through them. I tried various tools that alter only one color overall shot of another color, but that work here. I'm trying to change the color of individual objects at times keys in the shot.

  I could easily do it with Photoshop, but it takes a long time and I'm sure that Premiere Pro or After Effects to do this much faster.

  Please make suggestions. Thank you.

  The best thing to do would be to use the new masking effect and follow-up in 14 CC and the feature that allows you to apply an effect to an area of masking. The other option would be to duplicate the layer of film in order to have a copy for each element you want to change, roto individual items and then apply color effects to each of the duplicates. If you have no idea what I'm talking about then search Rotobrush and study up. If you have 14 CC then watch this tutorial by my friend Stu Maschwitz. It uses Colorista and Magic Bullet Looks, but the technique would do exactly what you want to do using other color effects.

  Red giant - RGTV

• Change the colors of objects when you press the shortcut efault (D)?

  Hello

  Is is possible to change the color of an object gets when I press the keyboard shortcut (D).  As it is, the object by default black outline with white background, but I want to know if it is possible to set it up so that I can choose what the default fill and stroke color to the shortcut.

  Thank you

  Laz

  Appearance--> make the default current appearance Panel.

  Mylenium

• How can I change the color of a pair of shoes

  I need to change a pair of beige to red shoes.  I'm not a beginner, but it's the first time I have to change the color of something.  Can someone help me?

  Thank you!

  Video links

  Change the color of an object. Adobe Photoshop CC tutorials

  Photoshop tutorial: How to change the color of a jacket in two minutes - YouTube

  Photoshop change a shirt from white to red or even black - YouTube

  It will be useful.

  ~ Mohit

• How can I change the color of the mixture without polydioxanone it?

  If I have a simple mixture of two lines, and to change the color, I'm going to > objectives > mix > release of mixture and then change the color by selecting and changing the shade of the race.  So, I have to redo the mix and eventually reapply the mixture settings.  I'm generally uncertain of color combinations and working things by trial and error so sometimes, it's a lot of clicking. I know there is a keyboard shortcut for the release of mixture, but it's always a chore if you use a stylus or a mouse.

  It's what lies beneath my question - is there a quick way to change the color of a vector that is part of a mixture?

  Thank you

  Martin

  You need not leave the mix to change the color. Use of the

  tool Direct Selection to select only one race at the beginning or at the end

  the mixture, which will allow you to change the color and the mixture

  updates automacly. You can also select the entire mixture and use

  -LiveColor to change the color of each object that make the mixture in

  only once.

• IDCS3 Mac application effects change the color of the images and other objects

  Something strange happens in InDesign CS3. Hope someone can help me.

  When I apply an effect such as drop shadow to an object the colors of all other objects on the page change. When I say change I mean almost like the profile (for example, RGB to CMYK) conversion. The colors change all objects on the page but does not affect objects on other pages of the same document. Applying an effect such as shade or gradient change the profiles of other objects color?

  Very confusing. Is this a bug or I do something wrong?

  I'm on a Powermac G5 Tiger running. My color settings are ProPhoto RGB (bridge of thought) and slept Fogra 39 for CMYK.

  Profile incompatibilities are defined to preserve incorporated for RGB and CMYK profiles.

  Concerning

  Jach

  Try to change > merger of transparencies... space and replace it with Document RGB.