Change the color of several objects

Similar Questions

• I'm trying to follow the video to "Change color" and I don't have a lot of options that uses the presenter.  I'm on a PC.  Can someone walk me by changing the color of an object step by step?

  I'm trying to follow the video to "Change color" and I don't have a lot of options that uses the presenter.  I'm on a PC.  Can someone walk me by changing the color of an object step by step?

  Sorry for the delay. Here is the video

• Change the color of an object

  Very unsuccessfully tried to change the color of an object:

  My simple approach was:

  A BMP format color is black and I want to change in Royal Blue

  var myobject = MyDoc.GetNamedObject (Constants.FO_PgfFmt, "Heading 3")

  MyObject. Color.Name = "blue";

  alert (myobject. Color.Name) / / the color is always black

  I also tried:

  var mycolorprops is myobject. Color.GetProps)

  var i = GetPropIndex (myobject. Color, constant. (Name)

  mycolorprops [i].propVal.ival = Constants.FV_COLOR_ROYALBLUE

  or

  . propVal.sval mycolorprops [i] = 'Royal Blue '.

  If I can solve it for the color, then I'll be able to work with all other orders that involve properties.

  Hi Bob, here's basically how it's done:

  #target framemaker
  
  var doc = app.ActiveDoc;
  
  // Get the required objects.
  var pgfFmt = doc.GetNamedPgfFmt ("Heading1");
  var color = doc.GetNamedColor ("Red");
  
  // Apply the color object to the paragraph format.
  pgfFmt.Color = color;
  
  alert (pgfFmt.Color.Name);
  

  One thing to know: this only changes the color to the paragraph format, but it does not have the equivalent of an update all in the paragraph Designer. You should always pass by and apply the paragraph format updated (or color) to any paragraphs containing the tag with this format.

  Rick

• Action to change the border color changes the color of full object instead

  Whenever I try to do an action in which I change the color of the border, the action is not the way that I save it. Instead to change the border color, as I did in the record, the action changes the color of the whole object (for the color that I have saved) and leaves the border to be black.

  Ok. I think that actions make a difference between the stroke and fill. If you have an action to apply a swatch/color, it will apply this color to everything you have 'face' (look at your tool palette: fill overlaps the race?).

  to get what you want, you may need to make a graphic with the fill color style, as you want and use the action to apply instead of the shade.

• Change the color of an object with blur

  I have a group of objects, that I submit for a stock site, but as I was testing things I realized that I couldn't change the color of the blurred items that I had developed the appearance. I had expanded the appearance so that if the object has been to scale upwards or downwards, the blur would stay in proportion. How can I maintain the blur effect (trying to make the highlights and shadows mix their better circles), while being able to change the color, AND resize it while maintaining the proportions? All tips are appreciated!

  I found a solution. If someone runs into it, here's how you can resize non-destructive. You don't need to expand appearance so you can keep changing the color and appearance itself. You'll just have to resize using the tool of the scale instead of drag the handles of the object. When you use the scale tool, you can specify that you want to scale appearances.

• Change the color of an object generated in AS3

  I want to change the color of the square, which is an object having paved the square (Square is a place in my library). I tried various methods, but I can't use something like 'square.colortransform.color =' because it returns the error that square is not a good thing. What is happening is that I spawn a place initially, and the user clicks on the site when they click on it, it changes places, but also the color, but I can't find a way to do this. I tried beginFill and colorTransform.

  Here is my code for my Square.as class, which is where I'm sure I should change color with each click of the place:

  package 
  {
      import flash.geom.ColorTransform;
      import flash.display.MovieClip;
      public class Square extends MovieClip
      {
          var score:Number = 0;
          public var square_x:Number;
          public var square_y:Number;
          public var square_height:Number = 0;
          public function Square()
          {
  
              height = Math.round(Math.random() * 160 + 50);
              width = height;
              square_height = height;
              square_x = Math.round(Math.random() * 385 + (width / 2));
              square_y = Math.round(Math.random() * 700 + (height / 2));
              x = square_x;
              y = square_y;
              trace("X:" + x, "Y:" + y, "Height and Width:" + height);
          }
  
          public function changeParameters():void //I would change colors within this function
          {
  
              trace("Object Clicked");
              height = Math.round(Math.random() * 160 + 50);
              width = height;
              square_x = Math.round(Math.random() * 385 + (width / 2));
              square_y = Math.round(Math.random() * 655 + (height / 2));
              if (square_x + (width/2) > 480)
              {
                  edgeCorrect();
                  square_x = square_x - 25;
              }
              if (square_y + (height/2) >750)
              {
                  edgeCorrect();
                  square_y = square_y - 25;
              }
              if (square_x + (width/2) > 480)
              {
                  edgeCorrect();
                  square_x = square_x - 25;
              }
              if (square_y + (height/2) >750)
              {
                  edgeCorrect();
                  square_y = square_y - 25;
              }
              x = square_x;
              y = square_y;
              score = score + 1;
              trace(score);
          }
  
          public function edgeCorrect():void
          {
  
              if (square_x + (width/2) > 480)
              {
                  square_x = square_x - 10;
              }
              if (square_y + (height/2) >750)
              {
                  square_y = square_y - 10;
              }
              if (x + (width/2) > 480)
              {
                  x = x - 10;
              }
              if (y + (height/2) >750)
              {
                  y = y - 10;
              }
  
          }
          
  
      }
  };
  

  Have you tried to make the object square a movieclip with different colors in different settings?  That would be an option.

  How to assign a color transformation is more complicated than just the line you mentioned...

  var myColor:ColorTransform = square.transform.colorTransform;

  myColor.color = 0x0000ff;

  square.transform.colorTransform = myColor;

• Change the color of an object inside the svg image?

  Hello

  I would like to draw an animal with several fill colors, but creating a different image for each color does not seem reasonable. It would then be possible to change the color of the image with the help of code svg.

  I found the following:

  http://StackOverflow.com/questions/11978995/how-to-change-color-of-SVG-image-using-CSS-jqu ery-svg-image-replacement

  or

  http://Keith-wood.name/SVG.html

  But I get an error of installation with two options - mad.

  Maybe someone here can create an example on how to change the color of the svg image added in stage with a click of a button?

  Thank you

  This is an optimized version (less code and navigation): file attached.

  About 1.

  What functions are you talking about [. createRect(),. changeImages(),. colorizeParts()]?

  These functions: what is stopped? What place?

  A function is a single task. You have a task list?

  About 2.

  21. you can hide and see the mouth open or closed mouth.

  22. you can use many features of jQuery:.css(z-index) or before(), after(). Maybe,. map().

• feel very stupid, but I can't change the color of an object

  OK, I was just a little project of design that would have the side effect of having to become familiar with illustrator. It was OK so far but I encountered a strange problem. Here (probably too much detail) the situation (I write in detail so much because I don't really have an idea what I'm doing and it's quite possible that I created my problem by doing something wrong along the way...)

  I'm working on a design for a t-shirt which must include a certain logo, an acorn. I have the Glans in a pdf document and imported into illustrator very well. I was able to play with it and changed its color a couple of times. I worked on my design and finally opted for what I was going to do - I have essentially created a flower pattern by repeating the Glans in a circle, turning by 30 degrees each time. I did when pasting the Glans on the artboard, then turning, sticking in my flower, then paste another copy on board graphics, turning, by pasting in the flower, etc... you get the picture. so now I have my Glans-flower. but I decided I want to change the color of the Acorns to red, and when I try to do it at all the individual acorns in my design, or do the whole tassel flower when it has been grouped, one of 2 things happens, according to what the color button, I press: either the whole area around each Acorn fills completely red, the transfer on the Glans and leaving me with a lot of red rectangles , or the lines in the Acorn change red color, but the grid of the rectangle around it (which are not normally visible) appear and become red too!

  I've done this wrong all? any ideas, to share again?

  Thanks in advance

  h

  Try this with the direct Selection tool, double-click the Glans to implement the isolation mode and with the Glans even now, try to fill, select direct selection tool?

• How to change the color of an object without losing its detail?

  Hi all

  I get by creating most of the time the artwork for my ad in photoshop, my finished product is always good, but I'm not an expert by any means.

  Currently, I am in need a yellow real estate sign post... all sock images that I can find to buy are white. I'm sure that there is a way to fix it, but I'm coming without the required knowledge...

  Starting with an image like this:

  [IMG] http://i1043.Photobucket.com/albums/B439/just_luc/Firefox%20Uploads/stock-vector-for-sale-Signe-vecteur-1.jpg [/IMG]

  (And before everyone says anything yes I know this is proof... I fully intend to purchase the image once I determin I'll be able to use it for my needs.)

  I tried just using the paint bucket tool in the color I need:

  [IMG] http://i1043.Photobucket.com/albums/B439/just_luc/Firefox%20Uploads/test.jpg [/IMG]

  If I spend a little time I can obviously do a better job, filling all space missed, but the image loses the grain of wood and other details...

  Is there a better way to do this?

  As always with Photoshop, there are several ways to achieve this.

  One method would be to select the woodwork in the Panel (see below) and to promote this selection into a new layer Ctrl (or cmd on a Mac) + J

  Then select the layer effects (by clicking on the button fx at the bottom of the layers panel.

  Then select color overlay

  Choose the color that you want to

  Then play with the blend mode (you will probably find that multiply or color will work better - but have a play).

  To select the woodwork, you can use a number of methods, including the following:

  Use the pen tool and then convert the path to a selection

  Go to the menu select, then select color range

  Use the quick selection

  There are other ways (do a search to make selections in Google)

  Another method would be to create an empty layer above the layer that has the Panel and then (on this layer) with the paint brush tool on the Panel with the color you want. If you multiply or the selected color in the blend mode, you can keep all the texture of the original image.

  As I said there are probably at least another 99 ways to do it - the above is only a few suggestions.

  I suggest that you have a good game and see what happens.

  Any clarification - then just after again.

  See you soon

  John

• Change the color of the objects on the film

  For a project I'm working on, I need to be able to change the color of the objects individually. A person moves into the shot, and I wish that some objects in the street to change color as it passes through them. I tried various tools that alter only one color overall shot of another color, but that work here. I'm trying to change the color of individual objects at times keys in the shot.

  I could easily do it with Photoshop, but it takes a long time and I'm sure that Premiere Pro or After Effects to do this much faster.

  Please make suggestions. Thank you.

  The best thing to do would be to use the new masking effect and follow-up in 14 CC and the feature that allows you to apply an effect to an area of masking. The other option would be to duplicate the layer of film in order to have a copy for each element you want to change, roto individual items and then apply color effects to each of the duplicates. If you have no idea what I'm talking about then search Rotobrush and study up. If you have 14 CC then watch this tutorial by my friend Stu Maschwitz. It uses Colorista and Magic Bullet Looks, but the technique would do exactly what you want to do using other color effects.

  Red giant - RGTV

• Change the colors of objects when you press the shortcut efault (D)?

  Hello

  Is is possible to change the color of an object gets when I press the keyboard shortcut (D).  As it is, the object by default black outline with white background, but I want to know if it is possible to set it up so that I can choose what the default fill and stroke color to the shortcut.

  Thank you

  Laz

  Appearance--> make the default current appearance Panel.

  Mylenium

• How can I change the color of a pair of shoes

  I need to change a pair of beige to red shoes.  I'm not a beginner, but it's the first time I have to change the color of something.  Can someone help me?

  Thank you!

  Video links

  Change the color of an object. Adobe Photoshop CC tutorials

  Photoshop tutorial: How to change the color of a jacket in two minutes - YouTube

  Photoshop change a shirt from white to red or even black - YouTube

  It will be useful.

  ~ Mohit

• How can I change the color of the mixture without polydioxanone it?

  If I have a simple mixture of two lines, and to change the color, I'm going to > objectives > mix > release of mixture and then change the color by selecting and changing the shade of the race.  So, I have to redo the mix and eventually reapply the mixture settings.  I'm generally uncertain of color combinations and working things by trial and error so sometimes, it's a lot of clicking. I know there is a keyboard shortcut for the release of mixture, but it's always a chore if you use a stylus or a mouse.

  It's what lies beneath my question - is there a quick way to change the color of a vector that is part of a mixture?

  Thank you

  Martin

  You need not leave the mix to change the color. Use of the

  tool Direct Selection to select only one race at the beginning or at the end

  the mixture, which will allow you to change the color and the mixture

  updates automacly. You can also select the entire mixture and use

  -LiveColor to change the color of each object that make the mixture in

  only once.

• Change the color of the text in several .psd with actions

  Is there a way to change the color of the text layers in several files in .psd (with a different text in each of them) with actions?

  All the files that I have to do that with are structured in the same way - background and above a layer of text.

  Here are the basics...

  #target photoshop;
  main();
  function main(){
  //select folder where PSDs are held
  var selectFolder = Folder.selectDialog( "Please select folder of PSDs");
  //if no folder selected quit.
  if(selectFolder == null) return;
  //get an array of all PSDs in the folder
  var fileList = selectFolder.getFiles("*.psd");
  //iterate through file list
  for(var a in fileList){
  var textColour = new SolidColor();
  textColour.rgb.hexValue = "00ff00"; //set colour to green
  open(fileList[a]);
  activeDocument.activeLayer = activeDocument.artLayers[0];  //Select top layer
  if(activeDocument.activeLayer.kind == LayerKind.TEXT){ //check if it is a text layer
  activeDocument.activeLayer.textItem.color = textColour; //set text to colour
  activeDocument.save(); //Save changes
  activeDocument.close(SaveOptions.DONOTSAVECHANGES); //Close document
  }else{//not a text layer so close document
   activeDocument.close(SaveOptions.DONOTSAVECHANGES); //Close document
   }
  }//end of filelist
  };
  

• I can't change the color of the text or objects? The color window is just grayed out. I don't only use shades saved already. Any ideas?

  I can't change the color of the text or objects? The color window is just grayed out. I don't only use shades saved already. Any ideas?

  Start by we tell what version of InDesign? What operating system /.

  Try to restore your InDesign preferences:

  Garbage, replace, reset or restore the application's preferences