Change the color of cell based on the text in another cell.

Similar Questions

• Change the text color with the eyedropper tool

  I've seen cc Photoshop tutorials where you can change the text color by using the eyedropper tool on the color swatch Panel. When the text is selected and the color swatch Panel is open. When I chose is which color I want out the color swatch Panel all them it does to change the foreground color and return to the soil box, why it changes the color of the text, as I have seen in tutorials?

  Any help would be appreciated.

  Thank you

  Rchjr

  When highlighted often is difficult to tell what color the text. You can work around this by doing the above, pressing ctrl-H or cmd - H on the keyboard and the highlight will be removed, but the text remains selected. Its exactly the same procedure that you use to make the mobile dotted lines disappear just leaving an active selection. Obviously the text tool must be still in use for all this to work with text.

• DC as a sentence installed and I can't find anything! How do I highlight some text in the box, how can I change the text color?

  DC as a sentence installed and I can't find anything! How do I highlight some text in the box, how can I change the text color?

  Hi taraf32044550,

  I think the new user interface can be a bit of a learning curve, but I hope that you really like it when you find your bearings. Please check these tutorials will help you to find your way around: Acrobat DC Learn & support.

  In particular, I think that you will find this tutorial very useful: change text and images in PDF files

  Best,

  Sara

• Change the text in the textfield does not work

  Hello!
  
  Another problem, I do not know how to solve:
  
  I have a dynamic textfield, which lies in a graph, and based on this graphic I designed a movieclip with interpolations of fade-in and bland-out of this graph.
  
  However, when I play the movieclip (ctrl + enter) and I want to change the text in the textfield with textMovieclip.textfield.text = "NewText"; the text is correctly set, but the textfield object disappears from the display. When I play this movieclip with the defaulttext I put in the textfield (without changing this text) everything works fine.
  
  Fonts required are integrated, I is not serious if I change the text before playing the movieclip or after and textfield is not only in the back behind the scenes. And for example to change the color of the defaulttext works without any problem.
  
  What have I forgotten? Do I have to put another value also?
  
  Welcome, Tschouba

  It's not like you have activated your textfield object autoSize property. or is your hidden textfield? and using something else than a simple 'u' in music and about?

• Acrobat Standard DC - can't change the text and text box properties

  Earlier this week, I lost the ability to change the properties of the text and text boxes.

  When I add a comment with a text box or in the text caption, I do all the time, I used to be able to change the font color, size, alignment, etc.

  Now, when I go to insert a text box or the legend, all the options in the properties bar are grayed out.

  This issue effects ONLY the text in the box and the caption functions. all the other drawing functions work very well. I can change the color, fill and the type of lines around the text, I can just change the text.

  Any suggestions?

  Thank you.

  Hello

  We have released an update today which solves the problem of the properties toolbar and now you can continue to use it outside of the app commenting as well. Please open Acrobat or Reader DC and visit help > check for updates to ensure that you are on the latest patch.

  Details on the release: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-august-02-2016.html

  Please let us know how it goes.

  Thank you

  -ashu

• Cannot change the text box.

  Adobe Acrobat DC recently auto updated to the latest version, and it seems that the new version does not change the text boxes.

  The screenshot below shows what I mean.  I added a text box and pointed the police to change the size / font style / color, but it is gray just to go out in the toolbar properties (Ctrl + E)

  

  Has anyone experience this problem?

  Hello

  We have released an update today which solves the problem of the properties toolbar and now you can continue to use it outside of the app commenting as well. Please open Acrobat or Reader DC and visit help > check for updates to ensure that you are on the latest patch.

  Details on the release: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-august-02-2016.html

  Please let us know how it goes.

  Thank you

  -ashu

• change the text of legend group object image size figure

  I need to change the text frame size legend for figure based on the width of the figure in grouped objects

  How to do it please advice.

  Your information and code are not accurate! > Some parentheses are missing, expand the textframe 240 or the width of the image?

  However: Everything made to the works contained in the user interface, it expands the scope of the legend in my test to the right. I decided to write an own function for editing.

  main();
  
  function main() {
  
  var curDoc = app.activeDocument;
  var allGroups =  curDoc.groups;
  
  for (var i = 0; i < allGroups.length; i++) {
    var curGroup = allGroups[i];
    var pItems = curGroup.pageItems;
    if (pItems.length != 2) { continue; }
    for (var j = 0; j < pItems.length; j++) {
      var curItem = pItems[j].getElements()[0];
      var constrName = curItem.constructor.name;
      if (constrName == "Rectangle") {
        var rect = curItem;
      }
      else if (constrName == "TextFrame") {
        var tf = curItem;
      }
    }
    var rectGB = rect.geometricBounds;
    var tfGB = tf.geometricBounds;
    tfGB[1] = rectGB[1];
    tfGB[3] = rectGB[3];
    tfGB[2] = tfGB[2] + 20;
    tf.geometricBounds = tfGB;
    fitFrame(tf);
  }
  
  function fitFrame(aFrame) {
    var lastBaseLine = aFrame.lines[-1].baseline;
    var b = aFrame.geometricBounds;
    aFrame.geometricBounds = [b[0], b[1], lastBaseLine, b[3]];
  }
  }
  

  Note: The script will check if there are two elements on the page of the group. It does not, check if these two elements are textframe and rectangle, it assumes that it is correct.

  Kai

• Change the text aline of the part of the label of af: inputText

  Hello
  
  I want to change the text aline of the part of the label component af:inputText to "right". So I put the
  
  AF | inputText::label
  {
  text-align: right;
  }
  
  inside my css file, but it does not work. If I put
  
  AF | inputText:disabled:label
  {
  text-align: right;
  }
  
  It works for disabled inputText components, but I want to "text-align: right" to apply to all of the components of af: inputText. You have an idea?
  
  Thank you
  Will do

  Do, please always tell us your version jdev as the solution may depend on it!

  Depending on where you put the inputText you nee on the skin for example

  af¦panelFormLayout::label-cell{
      text-align: left;
  }
  

  Timo

• InCopy CS4/Win: preventing the entry or change the text in tables

  Hello

  I have a plugin for InCopy CS4. In this plugin, I like to prevent the entry or editing text in the tables. It works in the window layout, I can detect if the user clicks in a table and then I stop.

  -How can I do this in the closet or article window?

  -Avoid the user to open a table to change the text? I mean the opening of the table through arrow.

  -Do not allow the user to enter text in a table cell?

  Thank you for any suspicion.

  Kind regards

  Hans

  Look for the CTextCommandPreProcess SDK.

  Your boss will be like this:

  IID_IK2SERVICEPROVIDER, kTextPreProcessService,
  IID_ITEXTEDITPREPROCESS, kMyTextPreProcessImpl,

  HTH

  Dirk

• (CS4) How to change the text in the character format?

  Hello scripters.

  I need help with a problem with "FindChangeByList":

  I want to change the text with special elements (and more than one element),

  for example: color: black AND italic AND subscript

  (high, critical, or small caps)

  and change in a character format that I have before defineted

  (lets call it for example "01 - xyz").

  As I understand it, I can do it with GREP and 'FindChangeByList-sript.

  But what should remain here '?

  grep {"find what:"?} "} {" change to: "?} "} {include notes: true, include master pages: true include hidden layers: true, any word: false} find all double spaces and replace them with single spaces.

  Can someone help me, please?

  Your Oliente

  http://Kasyan.HO.com.UA/downloads/RecordFindChange_CS3_Kas.zip

  This script writes the current preferences of find/replace in a text file so that you can copy and paste the in a list file search/replace. It will be useful for those who use the FindChangeByList.jsx script and have trouble with editing files FindChangeList.txt
  Written by Martin Fisher (I made a few minor changes: translated from the German text into English)

• How can I change the text in the Messages to the vertical?

  How can I change the text in the Messages to the vertical?

  If you mean change the orientation, simply turn the phone. If this does not work, close Messages and then run again.

  To close the Messages, press the Home button twice quickly. You will see small glimpses of your applications recently used. Drag to the left to find the application you want to close. Swipe up on the preview of the application to close.

  If it does not, the strength to restart the phone. No data is affected by this. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• How can I add a right click Menu mouse to click 'CANCEL' * and * "REDO" button to change the text in Firefox?

  How can I add a Menu with the right mouse button to display a "UNDO" AND "REDO" button to change the text back in Firefox without losing or forgetting the changes as I can under Google Chrome? -OMG I told dinnt - SORRY!

  Glad you stuck with this issue cuz I pulled a real boner trying to fix. I was totally distraught on the main menu of * two * UNDO and REDO. If you remember that I tried to install the menu shortcut for UNDO them and REDO and totally rejected the idea that they might be under Edit on the crazy Main Menu which of course, they have been and worked like a charm. THANKS again man, you are a true hero!

• How to change the text in the taskbar?

  I want to change the text that appears in the windows taskbar. Currently it shows the title of the Web page that you opened. I mean "Mozilla Firefox" all the time. This can be changed?

  https://addons.Mozilla.org/en-us/Firefox/addon/nightly-tester-tools/

  Nightly Tester Tools has an option to create custom text for customized by using the "Titlebar" window in tools title bar > Nightly Tester Tools > customize Titlebar. You can use the 'Variables' listed or just type anything you want displayed on the title bar, or even a combination of Variables with your own text.

• change the text of a comment to report programmatically

  I learn the new 2012 Diadem oriented object of the report.

  I'm changing the text of a comment to report programmatically.

  Dim Mycomment
  Set Mycomment = Report.ActiveSheet.Objects.Add (eReportObjectComment, "MyComment")
  MyComment.Position.ByBorder.top = 30
  MyComment.Position.ByBorder.bottom = 20
  MyComment.Position.ByBorder.Left = 20
  MyComment.Position.ByBorder.right = 30
  Text MyComment.Text = "Some"

  MSG for error on the last line of the previous code = "object does not support this.
  "property or method: 'text.

  I can change it manually by double-clicking the comment, but want to change it to
  the script.

  'Text' is available as an option when you type the script. The object "text".
  works great if I am modifying an eReportObjectText but not an eReportObjectComment.

  Thank you
  James

  Hello James,.

  Please check with updated the last line of code:

  Text MyComment.Comment.Text = "Some"

  Dia791

• How to change the text Boolean unique element of clusters...

  Dear Sir.

  I need to change every single Boolean text element cluster programatially and here attached to my example of program it will change only the text lable, but I need to change the text Boolean cluter element .it posssible or not.

  Your program is not attached.

  What you need to do is right-click on the property node create on that and something specific to change.

• Change the text of each tab of a tab control

  I would change the text/display of the individual of a tab control tab label when the software is running.

  Is this possible? Or, is it a good idea for OR add an attribute of "legend of the tab" tab control, so it can be done easily?

  Thank you.

  Yes, you can change the label of a tab programmatically.

  http://digital.NI.com/public.nsf/allkb/F2C3875A7DC7C7BA86256B760007D122