Similar Questions

• How to change the text box in Acrobat XI, created by earlier versions of Acrobat

  Hi, I'm having a hard time trying to figure out how to change a text box that was created in an older version of Acrobat and used to fill in a form.

  In my case, I added text boxes on text pre-existing using an earlier version of Acrobat.

  When I try to click on the text box, however, it seems to be back on the existing text and not allow me to change the text box I created in the past.

  Try changing the text with the tool 'Add comment text' which is in the notes pane. The text used to complete the form may have been written as annotation, so when you try to change those with editing tools, the original text is being edited.

• Cannot change the text in the existing mathscript box

  I'm under Labview 8.2... I know it's super old, but I met some compatibility issues and found it much easier to continue in version 8.2.

  In my while loop I a mathscript box that controls which cases need to be chosen for each loop.  This configuration has worked perfectly in the past, but now when I try to change the text in the box of mathscript (blue box) I can not type anything in the box.  I click the mathscript box and selects just as if I want to move around.

  Anyone know what could be the cause of the problem?

  Thank you!

  You don't want the arrow tool. You want the tool to operate. One that looks like a helping hand.

  Have you checked that you have enabled editing that made a license for MathScript? Check your License Manager.

• Using paint and how to change the text box.

  How can I select a text box that you want to modify in the paint - Windows 7 Home Premium?  Once I leave the text box I can't select again a second time to change the text or grab it to move... I must be missing something very simple?  Is there a manual program somewhere?  Yes, the zoom is 100% and I am the administrator.  Thanks for any help!

  The painting is a very simple program and does not support the re - select a text box to change the content.

  "mikecvista" wrote in the new message: * e-mail address is removed from the privacy... *

  How can I select a text box that you want to modify in the paint - Windows 7 Home Premium? Once I leave the text box I can't select again a second time to change the text or grab it to move... I must be missing something very simple?  Is there a manual program somewhere?  Yes, the zoom is 100% and I am the administrator.  Thanks for any help!

• cannot delete the text box entry - break cp8

  I have two text input boxes and a button smartshape on a slide.

  Text entry areas require username, stores the responses into variables. The button moves to the next slide. I don't want the button to pause the slide, but not text entry areas.

  When I uncheck the 'pause after"in the properties of the input synchronization for each of the text boxes, the break is always carried out for each. In fact, icon pause shows still on the layer of the timeline for each as well.

  The result is that my slide stop 3 times instead of once:)

  It's Captivate 8, sensitive project.

  It is for some a bug in CP8, in previous versions you can change the time of the break, but you can disable it. Must be a design fault, using the same properties of timing for each interactive object to CP8 (to make it "clear").

  For me, it makes sense that you can't disable pause in BER, since it must wait for an input from the user. It's the same for question slides, no way to disable the pause, you can move only. For BER you can move with the synchronization properties, which is not yet the case for Question slides where you (still) that slide on the Timeline can move the point of interruption.

  Why should you get this button? If it is designed as a next button, do you want so that it can move without entries in of the TEB? Then set its action to 'go to the next slide", not to continue?

  Lilybiri

• In the edition browser cannot change the text most

  I can't change the text of most. There are a few areas that can be changed, such as the text that is linked and images (with the exception of images of text). But the basic text not! The site is www.abientotandkidspot.com.

  You use a system font for some text, the entire text exported as an image block. If a block of text uses only web-safe fonts or present web fonts natively in Muse, it should be editable (except some other condition in the documentation link above applies).

  Abhishek

• cannot change the text field after grouping

  Hi people,

  I have 3 single-line text fields and a logo combined using 'Add parents '.  For some odd reason, I can't select a field to edit text.  I can select them in the assets Panel and change the layout or style, but as soon as I double-click to edit the text, my selection goes to the div parent instead of the text field.  I tried to use the text as well, but it always happening in selection to the parent.  This isn't a big deal since I can change the text later in a Publisher, but it's a little frustrating.

  FWIW, I ran the update of this morning before starting, but I doubt that caused this nothing thanks for any help

  -Kevin

  So sorry Chris, in my frustration, I removed the parent and the group so I can get the item that I wanted to edit, and then recreated the parent.

  However, your description of the differences between the Group and Add Parent in this discussion: http://forums.adobe.com/thread/1361983?tstart=0 probably explains why I have problems.  I think I had GROUPED fields 3 text and then wrapped in this group and the image of the logo in another div with 'Add parents '.  I have probably not been not clicking successfully through the parent company to the group, and then in the text field.  In fact, I was clicking like mad, but probably not on the correct spot for each level.

  Thank you to specify how these elements work.

  -Kevin

• Cannot change the text and no answer here fits

  I'm trying to change the text in a doc, I created long ago in ID CS6. I can't access it to change. The layer is not locked, and the text is not on a master page. I can access text on some pages, but not others, and I can't understand the difference.

  Here are the words of one thousand dollars:

  

• Cannot change the text in the Master Page

  I don't often work in InDesign.  I had created a template file for a book back in December 2011 (initially created in CS3).  I opened this file in CS6 today and did save as.  Now it's time to change a few things to customize for this new book.  So, I went into the Master Pages to tweak things.  But, I can't edit any text.  I can click on some pictures (not all), but no text is selectable or editable.  What in the world happened to my account?

  I have also returned for the final files for the book that I did in December (not the template file, the files of actual work).  Those who give me the same behavior.  Text that should be editable is not selectable.  Once again, some photos can be selected and moved, etc. but no text/text box.

  Is there a conversion that takes place opens a CS3 file to the CS6 which causes this?  How should I do?

  Thank you

  Matt Tyree

  You can always open the objects individually using either the layers panel (which is been updated, too), or by clicking on the lock icon on the object itself (near the upper left corner).

  That said, you'll be happier if you cahng Evos preferences to allow selection of locked objects. This essentially restores the beahvior you are used to see - post is locked, but you can still select and put the content in a frame.

• You cannot change the text on the models of Stock from Adobe

  I downloaded a graph (AdobeStock_117354228 & AdobeStock_117354263) and I am unable to edit the text. Specifically, it seems that there is too much anchor and points objects able to edit this file.

  Am I missing something here or these files are supposed to be difficult to change.

  I browsed this forum support and only found a post related to this topic.

  Poorly created vector files.

  Abdul Qaiyoom

  Text in .ai files are converted into marks if they use a non system font. If the image uses a font that is not on a computer by default may not be included in an editable file because the author has failed to provide to the police. The only way to change in all the classes like this is to open the image in PS and use the recognition of police tool to find the font used or one close to it. Then, delete the text in the image and add your own. It is a question of law with the licensing of fonts that requires to do this way.

• You cannot change the text layer

  I am trying to change a word in a layer, but whenever I click on this word a new layer comes and I can't access the text in the layer I want.  What I am doing wrong?

  According to the guidelines of the screenshot you provided, it seems the text layer was rasterized or flattened, you can't get back to edit mode.

  ~ UL

• Cannot change the text in the menu

  

  I downloaded a template I'm trying to edit the text in the menu and despite everything I try, I can't seem to change. I'm sure it's something simple, but I'm stuck. any help would be appreciated.

  Thank you

  Stephen

  If the menu is not a menu manual, it takes the name of the site. This means: go to the plan view and change the name of the site, or to use a name that you like right on the page icon, choose 'Page properties' and use another name.

• Cannot change the text style in the first 12 items

  In the first 12 items, it seems as if when I add a title and text and you want to change the style of it, which there are many choices, I can do it once or twice, but if I want to do with multiple texts, it does not work. After changing the style of some text once, or maybe two, it does not work yet. The text does not change when I click or double click on the style that I want to use. I have to close the software for each text and then reopen my project to be able to edit another and keep this. I do not understand why it works no more than one or two times?

  jollestudio

  What you say is an old story that you may have missed.

  There is a default text Style / in space of work elements 12 Expert (not quick workspace). This flaw was corrected by updating your 12 to 12.1 via Help Menu/updates to date. Have you been there and done that?

  http://www.atr935.blogspot.com/2014/03/pe12-update-121-released.html

  The blog should give details on update 12.1, including some history on 12 issue of Style of text/before the 12.1 update.

  Please let us know if you're OK with the above information and if it worked for you.

  Thank you.

  RTA

• Cannot change the text "form received.

  I have a form of work except by submitting the text "form received" message is partially hidden under the input of the captcha area and is a different color than the text on the page.  I can't find a way to select, move and format this text in muse... Is there something that I am missing?

  

  Select the form in Design view and switch between the States in the States Panel or the control bar. You can change this text for the three States other than the Normal state of course.

  Thank you

  Vinayak

• cannot change the text in PDF format

  Hello

  Using Acrobat Pro 8.1.7 mac intel a lot of ram. I've got a PDF from a client that comes with the areas that I can change allegedly. However, I get this message:

  All or part of the selection has no available system fonts. You cannot add or remove text using the current font selected.

  Helv Neue Roman TT is the police. I have all Helv Neue but this one. If I buy it I change it?

  Acrobat 9 it would be easier?

  Thank you

  You ran over to one of the problems with the editing of PDF files. They are not really designed for this type of installation.

  You would need the "exact" font on your system and even in this case, it may not work.

  If the creator of the file being used mean and Open Type Font (works on Windows and Mac) and you had the same one, that would be your best bet.