Change the color of the scratch area?

Similar Questions

• What is the best way to make big changes of color for items that are already selected?

  CS4 on Mac. I want to do some color changes. So many options! It is posed, for the items in question, they are already a good, saved section that describes also the colors, the new colors I want to use are recorded to the color chart. And one of the changes is a little extreme - satuaration, hue and brightness. In these circumstances, what technique of color change would try first?

  If you mark a specific point in the image and the shade with the color sampler tool, you can use the curves to match the values. Unfortunately, with a reference to singlepoint, as RGB color changes it can also change the tonal scale and local contrast and can even change color in the image. The best solution, especially if one of your samples consist of a significant change in the value is color LAB where color and tonal scale are handled in separate channels.

  

• can I change the header area while composing a message from blue to white

  I use Tbird 31.0 on a 64-bit Windows 7 computer. I had to reinstall the operating system, and since then, when I compose a message, the header area is blue. I can't find a way back to white, as if it were. I can?

  The "Tan" off header lines occurred when they did the 31.0 update.
  Several people have complained about this.
  There is a bug report, you can vote to encourage a change back to display previous appearance and usability.
  You must register in order to vote.

  • https://Bugzilla.Mozilla.org/show_bug.cgi?id=1051638

• Change the subject area in an analysis

  Hello I wonder if you can change the "subject" on a report already provided it has the same dimensions and measures with the same name? Thank you

  Yes, Gianni Ceresa was faster/more faster but just to mention: you need more that that a tag if you used registered filterswhich are stored in files 'Subject area content' vanilla - technically _filters records.

  
     
        
           
              
                 "Time"."T05 Per Name Year"
        
           
              
              
                 "Time"."T05 Per Name Year"
                 2009
     
  

  Basically you have to intercept all occurrences.

• How to change the Login area

  Hello

  Happy New Year to ALL

  On the Login area:

  I would like to know how to change the size of the region of Login and its place.

  For example: Login area should have a = 600 height and width = 100 and should be on the right side, not in the center of the screen.

  This problem concerns oracle12, apex 4.2 and html5 theme.

  Ziut

  Ziut wrote:

  Hello

  for example: apex.oracle.com

  workspace: tb2, tb2/tb2

  App = 23705

  My comp (for example):

  

  style = "height: 600px;" Width: 100px; »

  This is only an example. Theme 26.

  Ziut

  Ziut,

  This is the closest I could come to your comp.  The simplest implementation, I found was:

  1. A region has added to the Information
  2. Place the Login area in a Sidebar area model
  3. Kept the two regions in the same Point on the screen and the same grid.

  

  I have attempted to substitute the CSS for the Login region but made very little progress and make a slurry in a perspective of support.  You should always keep in mind that another person will have to support your claim, a day, and play the more you with him, it may be more difficult to maintain if it is not well documented.

  Here's my demo:

  Username and password are all two - demo

  https://Apex.Oracle.com/pls/Apex/f?p=11956:101

  Jeff

• Change the work area

  Hello
  
  I'm new to JAVAFX, just going through the documents and the examples provided in the site.
  Example "IssueTrackingLite" has a single file FXML, based on the selection in the list view (Project1, Project2) working area content changes.
  But if I had a requirement as the selection of the various projects should show different layout, then how could it be achieved?
  
  Is it possible to create different FXML and based on the selection of the projects can be integrated in the content area?
  
  Thank you
  Kishan

  Hello

  Yes it is possible. You would simply have to leave the 'Détails' box empty in the FXML master and fill it by loading different FXMLs when projects are selected from inside your controller code.

  Something like - for example:

     // Load the FXML for the selected project:
     FXMLLoader loader = new FXMLLoader("some fxml file", ...); //See the JavaFX 2.2 FXMLLoader API documentation
     Node projectDetails = loader.load();
  
     // Replace the content of the 'details' AnchorPane with the loaded FXML
     details.getChildren().clear();
     details.getChildren().add(projectDetails);
     AnchorPane.setRightAnchor(projectDetails, 0.0);
     AnchorPane.setLeftAnchor(projectDetails, 0.0);
     AnchorPane.setTopAnchor(projectDetails, 0.0);
     AnchorPane.setBottomAnchor(projectDetails, 0.0);
  

  Hope this helps,

  -daniel

• Can I change the registration area while recording a software Simulation?

  I am a newbie of Captivate. Can I change the Red recording area after you start a software simulation of recording? A Simulation of scenario would be better? Can I get a slide after registration? I found nothing in the doc online or in other forums. Thank you for your support.

  Hi SteelcaseMark

  So that the Rectangle red record, while recording, you can move it to a location different screen if you wish, but you cannot resize.

  For the sizes of the slide, you can resize the entire tape, but are generally not a single slide. However, you do not have the option to replace the backgrounds for slides with different slides. So, theoretically, you can resize one.

  See you soon... Rick

• How can I change the printable area in the 1510?

  I changed the margins in my Word document (T: 3; B. 3: R and l:. 5), but the it does not recognize and cut the first two lines.  How can I change the margins of the printer?  I have Windows 7.

  larrybmovie,

  Follow the steps below:

  1. go to your devices and printers

  2. click on your DJ 1510

  3. along the top where is add it an option of the device, select the print server properties

  4. under the Forms tab, select the option create a new form

  5. here, you can adjust the margins of the printer

• Keyboard equivalent to change the work area?

  Imagine that the work area is in another part of the timeline, and it is not nearby. You need to scroll around to drag it to the new settings.

  In After Effects, you type simply on the "N" key and the work area will jump to the wherever is the playhead. "."

  Please tell me that there is something like that in the first. I export a bunch of small segments of a timeline, and I'm tired of hunting and dragging.

  Thank you!

  1. Double-click the time scale.
  2. ALT + [or Opt + [to trigger the start of the space bar to work at the head of reading]
  3. [[Alt +] or Opt +] to follow the end of the space bar to work at the playhead.

  Reference Help: Adobe Premiere Pro CS5 & CS5.5 * keyboard shortcuts

  -Jeff

• OfficeJet 6500 E710n-z: How can I change the printable area

  I use a printer OfficeJet 6500 E710n-z.  In the past, with Microsoft Office 2007 and Publisher 2002 on a Windows Vista operating system, I was able to print publications with a margin of page of 0.125 "around all sides.

  I recently bought a new laptop running Windows 8.1 (64-bit) and upgraded to Microsoft Office & Publisher 2013.  Now my printable area is (landscape)-left margin: 0,587 "for a total width of 9,827".  The top margin remains the same, to 0.125 "for a total height of 8.25".

  I don't think I made any changes to the printer settings.  How to restore the printable region so that it has a margin of 0.125 "around the page?

  Hello @RonJRu,

  Thank you for visiting the Forums from the HP Support! " I see that you want to change your margins toward 0,125", since you upgraded to 8.1 of Windows and Microsoft Office & 2013 the printable region Editor is (landscape) - left margin: 0,587 "for a total width of 9.827 and the top margin is correct.

  When you upgraded to Windows 8.1, you would update the software and drivers for the printer as well?

  I would like to first run you printing HP scanner doctor > www.hp.com/go/tools

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Let me know what the PSDR find, I'll watch for your reply.

• Change the "scratch disks" preference using vbscript

  Hello

  Is it possible to change preferences for scratch them off or the disc via a script (vb)?

  Kind regards

  Ramon

  Sorry can't help with VB, but it's how I would do it in JavaScript...

  var List = ["C:\\","G:\\","I:\\"];
  scratchDisk(List);
  function scratchDisk(List) {
     var desc = new ActionDescriptor();
          var ref = new ActionReference();
          ref.putProperty( charIDToTypeID('Prpr'), charIDToTypeID('CchP') );
          ref.putEnumerated( charIDToTypeID('capp'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
      desc.putReference( charIDToTypeID('null'), ref );
          var desc2 = new ActionDescriptor();
              var list = new ActionList();
     for(var a in List){
              list.putString( List[a]);
     }
          desc2.putList( charIDToTypeID('ScrD'), list );
          desc2.putUnitDouble( charIDToTypeID('MmrU'), charIDToTypeID('#Prc'), 70.000000 );
      desc.putObject( charIDToTypeID('T   '), charIDToTypeID('CchP'), desc2 );
   try{
      executeAction( charIDToTypeID('setd'), desc, DialogModes.NO );
   }catch(e){}
  };
  

• Application Builder (Bug) - change the comment area is ORA-01461

  When I change a region and saving it with a long comment (5366 characters) iam getting this error
  
  Fehler beim use von line.
  ORA-01461: Ein LONG-Wert kann nur zur Einfugung in eine LONG-column paperback werden
  
  We use the Application Express 4.1.0.00.32 in this specific project.
  
  On apex.oracle.com in Version Application Express 4.2.0.00.27 that this error also occurs.

  Hi Oliver,.

  Comment attributes normally only record up to 4000 characters. I will file a bug to limit text box to 4000 characters.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Logged as administrator, but it is impossible to change the notification area.

  There was a similar question was answered here, but it only applies to Windows vista, I need win7 please

  There was a similar question was answered here, but it only applies to Windows vista, I need win7 please

  williamcll,

  Here is the link for Windows 7 computers to office and customization:
  http://social.answers.Microsoft.com/forums/en-us/w7desktop/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Change the workspace color

  I have CS5 Extended and my OS is XP.  I want to change the color of the workspace to black or at least to darken it.  I can't find any way to do this.  I tried a trick click the pot of paint, put in black, then Shift and click the workspace.  I tried to do a right-click on the workspace.  Nothing is no option. Under preferences/Interface, I put the black screen but nothing happens.  Any suggestions welcome!  Thank you.

  Christina

  You cannot change the color of the workspace when no document is open.  You will have to wait until Photoshop CS6 is released for it.

  However, you CAN change the canvas area when a document is opened, which is useful in many cases, because it can help you to focus on the colors in your document better.  In this case, just click right into the space beyond the edge of the document to see your options.

  -Christmas

• Why I can't change the index of movieclips on stage? (createjs)

  What I want to achieve is relative, simply and works in Flash but not animate a reason any.

  
  

  On the stage, I have a movieclip called 'Subscript', with a field of dynamic text inside this type 'text '. I want to create a dyamically of box shape and place it inside the movieclip 'index' behind the 'text '. Here is my script:

  
  

  	var hint = this.hint;
  	var padding = 10;
  	var text = hint.text;
  	var limit = hint.getBounds ();

  	Create forms
  	var box = createjs new. MovieClip ('independent', 0, false, null);
  	var rect = new createjs. Shape();
  	var stroke = new createjs. Shape();

  	Colors
  	accident var stroke = "#000000";
  	var bgcolor = "#FFFFCD";
  	shadow of var = 'rgba (0, 0.3, 0.0);

  	Draw shapes
  	outline.graphics.beginStroke (AVC) .drawRect (bounds.x - padding, bounds.y - padding, bounds.width + (padding * 2), bounds.height + (padding * 2));
  	rect.graphics.beginFill (bgcolor) .drawRect (bounds.x - padding, bounds.y - padding, bounds.width + (padding * 2), bounds.height + (padding * 2));
  	Box.Shadow is new createjs. Shadow (shadow, 3, 3, 0);

  	Add forms to hint
  	box.addChild (rect);
  	hint.addChild (outline);
  	hint.addChild (box);

  	Text to switch on the front
  	hint.setChildIndex (text, hint.getNumChildren () - 1);

  Unfortunately, no matter what I do, the last line does nothing. The shape is always on the top text! Yet, this same exact file works perfectly well in Flash.

  After doing some additional testing, it seems to me the the ' plan ' and 'rect' is drawn on the text at each tick. So, although the index of 'text' is changed, the forms are are then immediately pull out the top of it.
  
  I don't know why this has changed from Flash, it looks like a bug to me.

  UM...

  // text must already have been on stage for at least one frame