Change the command prompt based on the user login

Similar Questions

• I have a problem with the connection to the computer after you change the user name.

  Original title: HELP

  I changed the username on my laptop and it is not letting me log

  I changed the username on my laptop and it is not letting me log

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you have changed the user name.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• How can I change the user name and password

  I successfully download the FVO and install the virtual appliance. It works very well with my blackberry. I can connect to individual servers or virtual Center.

  However I don't know how to change the user name and password.

  I would also like to know how it works?

  We have a BES server on our network and no configuration is necessary. I just turned on the device Mobile Access of vCenter and entered the ip address of my virtual Center and bingo, I can access through my blackberry.

  If you try to change the Appliance virtual username and password, you can use the standard linux commands (adduser, passwd, chgrp, chown, etc.,)

  The default user name and password so that the robot is root/vmware"."

• How to change the user name - peer-to-peer network

  I recently installed shareaza, is a peer-to-peer network as you know. the problem is that all of my folders have my name on it: that is to say, he will say sharedfiles/Jose/my documents. I tried to change my username on useraccount, but the name of Jose remains on everything. is there anyway I can change this? Thanks for any help

  Hello

  The fact is that the username will be created at the beginning of the installation of the OS.
  It comes to you account on the laptop.
  Each user account includes the folder my documents.
  In this case, you cannot change the user account if you have a single user profile on the laptop. The title of the user accounts, you can create additional user with different names.

  The other possibility would be to change the download source. But that you change somewhere in the program settings. Unfortunately, this program is unclear to me. In this case, I can give t you information where you will find this option.

• Smartphones blackBerry how to change the user name of e-mail on a Blackberry Curve 9320.

  Dear community,

  I have a Blackberry Curve 9320. My company has recently changed their messaging system so I need to create a new e-mail account. Creating the account of electronic mail is not a problem. However. some settings need to be changed. When I go on settings, navigation key allows me to change the change the server info, type my password etc. However, I'm unable to change the user name. My device automatically generates a username of email that is not correct and I am unable to change because the navigation button jumps on this area. Can someone advise me on how a change the username of email on a curve 9320. Thank you.

  IT WORKED! Thank you very much. Force the unit to offer "I'll give you the parameters" was the thing. Have a great day.

• Change the user agent of the browser

  Hi all

  I am working on an app for Blackberry 6 and 7 using Webworks. I was wondering if it is possible to change the user agent of the browser.

  What I would do is, add a string to the end. For example:

  Default: ' Mozilla/5.0 (BB7) AppleWebKit/537.36 (KHTML, like Gecko) Safari/537.36 Chrome/33.0.1750.149.

  Mine: "Mozilla/5.0 (BB7) AppleWebKit/537.36 (KHTML, like Gecko) Safari/537.36 CustomText, Chrome/33.0.1750.149.

  Thanks in advance!

  The config.xml file, you can declare rim: userAgent value

  https://developer.BlackBerry.com/HTML5/documentation/v1_0/widget_element_834671_11.html

• How can I change the user of "My Documents" by default? »

  I'm changing the user to 'My Documents' which has initially set up a laptop from the MFG.  while I can use it to another employee. I changed the name of the computer, but how do I change the user of "My Documents" by default? »

  Hi W30330,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/deleting-old-user-accounts-and/08419300-ef7c-42e5-9027-f123128ebcf8

  I hope this helps!

• How can I change the user backup POS?

  Hi guys,.

  Wondering if or how I can change the user to backup of POS on my POS device. Is it possible to change the user after the installation is complete?

  Or I need to reinstall POS to do properly?

  thx for the advice

  Flo

  You can change the user in https://ip-adress/vdp-configure under Configuration.

  'Klick to change the configuration of vCenter' enter the PW the POS and you can change the user name of vCenter.

  A reboot is required after the change, and an integrity check will be performed during the restart.

  If the change will take some time...

  Paul

• Changing the user collection

  I need to limit the number of virtual machines that Ops Mgr is looking for licensing reasons.  I have my user configuration and permissions, but how do I change the user in the collection?  I left empty during the initial installation, so he has rights to look at everything right now.

  Thanks in advance,

  Aaron

  Hi Aaron,

  One of the selections for the vCenter in the Admin UI is "update" - allowing you to add your user to the collection.

• Change the user name in Smart View 11.1.2.1

  Hello
  
  Is it possible to force a change of username in Smart View 11?
  
  Once the user is connected to they need to restart the copmputer to change the user name.

  I thought of making a right click on the HFM application and clicking on logout would work, but it didn't. Instead, you must click on disconnect all. You can find it in the Smart Panel View, by clicking on the little black arrow next to the Home icon.

  Let me know if you still see issues.

  See you soon,.
  Mehmet

• What does "change the user myuser account unlock" do?

  What is the statement "change the user myuser account unlock" do? I'm looking at a few examples to use the oracle data pump. He asks me to unlock the account.
  
  TIA
  Ravi

  You can not access a locked account. You can connect to an unlocked account (open).
  ALTER USER myuser ACCOUNT UNLOCKING unlocks the account if you can connect using it.

• change the user of the BONE

  Hai all,
  
  Plan to change the OS user for oracle database applications...
  
  
  The database is currently owned by oratoure, I intend to change as follows:
  
  
  (A) create a new user, oramoure
  (b) assign the Group dba
  (c) change of complete ownership of the directory to oramour (where oracle apps_st and tech_st) is
  (d) attach the file of the environment to the bash profile...
  (e) provide access to oramoure to/tmp and/var/opt/ora *.
  
  
  nothing else to do?
  
  
  
  Kai
  
  Published by: KaiS on October 18, 2008 22:53

  Kai,

  Please refer to the following note and follow the steps in the evolution of the property of the database files (skip the steps of cloning):

  Note: 558478.1 - cloning of a house database and change the user/group that owns
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=558478.1

• Windows XP home do not move to the user login screen too early.

  How to configure Windows XP home do not go to the user login screen after a short period of time?  Very irritating.

  Go in Control Panel > display > screen saver .  Change the settinghold and/or uncheck the box on resume, password protect . Boulder computer Maven
  Most Microsoft Valuable Professional

• Please suggest, on the report of the User Login/Logout time consulted responsibilities, accessed Modules, what he did during his connection in R12.

  Hi gurus,

  I need your help. My requirement is as follows.

  1. my company wants to control the User Login/Logout time, consulted with responsibilities, accessed Modules, what actions he did during its connection... Can we get this report? If yes pls Guide...

  2 is the data in the fnd_logins table to get the purge after 24 hours, if so, how do not purge get...

  Thank you very much in advance

  Kind regards

  Afzal.

  WA alaikoum amani brother Salam,

  Check search content Hussein as he would certainly help.

  At the same time, also have a look on the following site

  Oracle Apps DBA online training,

  Queries for SESSION INFORMATION

  Number of users connected to Oracle E-Business Suite

  Hope this helps

  Best regards

• change the user interface presentation based on the size of the Panel

  I'm looking for a way to adjust the layout of my user interface based on the size of the group. For example, two buttons that are top of the other until the height of the window is small enough that they need to be next to each other instead.

  Another example would be a series of buttons that appear as a line if the Panel is wider than high, or in a column if it is higher than it is wide.

  -What someone does something like that, or know if it is possible? As I see it, all I need is a way to read the current size of the Committee and I can put a function in onResize/onResizing that allows to adjust the layout of the user interface.

  Figured it out!

  This change my row of buttons in a column of line based on the report of the window. Finally understood windowBounds.height and windowBounds.width.

  myPanel.onResizing = myPanel.onResize = function () {
    if (myPanel.windowBounds.height > myPanel.windowBounds.width){
         myPanel.grp.cmds.orientation = "column";
    } else {
         myPanel.grp.cmds.orientation = "row";
    }
    this.layout.resize();
  }