Change the DATE FORMAT in a data store

Similar Questions

• Machines MSCS with RDM, how to change the data store?

  
  Hello world

  I'm having a problem of displacement of 2 machines with RDM disks.
  We have 2 guests ESxi 4.1 with virtualcenter, but no license for vmotion.

  This 2 machines is building a MSCS Cluster (Microsoft) (file server) with multiple disks (5) RDM,
  for a total area of 8.9 TB. Of course, for use with MS cluster, the WDR is with physical compatibility.

  The problem is that the local vmdk (and also rdm.vmdk files) for these 2 machines are on the local data store (a machine for each host) and I need to move them to the shared storage. But if I power off of a computer and trying to change with the ROW data store attached, I get an error because the VMFS of the commune dastore (block size = 1 MB) does not support these large files (up to 2 TB).

  I read a lot of articles
  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1031041
  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1026256
  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1002511
  and a few other discussions of communities.

  In accordance with article
  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1005241

  I tried to turn off the machine, remove the RDM, migrate to another data store, and then reconnect the RDM.
  There is a big problem with the last point, because I don't know how readd the RDM manually (vmfsktools?).
  I want to add an existing drive, but he was in local storage, and I don't want more no reference to the file in the local storage...
  According to the documentation of vmware for MSCS, the second node of the cluster disks can be added simply to add a drive existing and selecting the
  existing node. If it is no problem of shared storage, but the host cannot read local storage to another host...

  Any suggestion to migrate a computer virtual with RDM shared storage room? Thank you

  E' possibile disabilitare he LUN filtering per vedere UN RDM gia awarded:

  http://www.yellow-bricks.com/2010/08/11/storage-filters/

  Option da diabilitare temporaneamente in vCenter config.vpxd.filter.rdmFilter

  Andrea

• How can I change the date to the Uk style format

  When I get my calendar reminders, it displays the date in the action column in the American style, which is confusing for example something today shows that the 11/05/2013 and not as 05/11/2013.

  If you can't find an extension based on the reminder, the next step would be the options for your calendar site. If it is a popular (e.g., Google calendar), you'll probably find advice on how to change the date format in a web search. If it is a more obscure, you could try their support if the option is not obvious.

• How to change the Date format

  Hello

  I have a question, is it possible to change the date format of a date value that comes from the database, therefore with the settings on the computer?

  I use jdev 12 c with Oracle database

  Thank you

  Hello

  You can use af:convertDatetime to set the date.

  Ref:

  Andrejus Baranovskis Blog: Handling of Format of Date and links of the ADF

  http://jdevadf.Oracle.com/ADF-richclient-demo/docs/tagdoc/af_convertDateTime.html

  date format ADF

  Thank you

  Amey

• Change the date format. MinValue?

  How can I change the date format. MinValue?

  If you get any solution for this, a work around you can try and update us if it works or not:

  Go to your date attribute in DataControls.dcx (you must first select the control of your data)

  You may need to click on change icon to open the XML.

  Under guidance UI do following changes:

  Type of format - Format of Date Simple

  -The format DD/MM/YYYY

• Change the Date Format of the data in Excel

  Hello, my data is stored in an excel file. They are connected to the Warehouse Builder through ODBC.

  When I used an operator to change the format of a date column, I have an error which referred to ODBC.

  Someone know how I can change the date format of the data that are not initially stored in an oracle database in oracle,.

  but in an excel file.

  If you need to know anything else, please ask me. It is so important to me. Thank you.

  When you directly use the warehouse with MS Excel ODBC without the bridge builder, then send your question directly in the Warehouse Builder Forum:

  Warehouse Builder

  We are discussing only matters concerning Oracle gateways.

  Thank you

  Klaus

• How to change the date format in Lightroom, when importing images?

  When you import into Lightroom, you get the following structure in Lightroom for Macintosh HD.

  Year-> Date.

  I want some level 3 like this structure.   Year-> month-> Date

  How to do this?

  Hi lennartr,

  When you import images, you can change the Date Format in "Copy as DNG, copy or move", but not in the Add box.

  On the right panel, you expand the Destination folder and change the Date Format.

  Let me know if it helps.

  Kind regards

  Tanuj

• Options for PDF export - how to change the date format?

  Hello

  
  

  I use Adobe InDesign CC June 2015 on Windows 7.

  When I export a PDF file to print, the date and the format is ' mm/dd/yyyy' (e.g. 2015/12/11 15:14:21) but I want to be ' dd/mm/yyyy' (for example 12/11/2015-15:14:21).

  I know it's possible because my colleagues have this date format on their PDFs.

  Do you know where I can change this option?

  
  

  Thanks in advance,

  Kind regards

  Julie

  Well, if the version of your indesign is french you must change the date format in system preferences

  to take a peek here how you can do

  Change the Format of Date under Windows 7, 8.1 and Windows 10 in dd-mm-yyyy

• I did a blog in adobe muse and his now adjust it in British Colombia, but I can't seem to change the date format of blog post?

  I did a blog in adobe muse and his now adjust it in British Colombia, but I can't seem to change the date format of blog post?

  My ideal date format would be / 28, Oct 2015

  can anyone help? I don't know that I can handle the {tag_postdate}

  You can use something like this in the post or poster list: {tag_blogpostday}, {tag_blogpostmonth}, {tag_blogpostyear}

• Change the date format on a database level

  Hello
  
  I know how to change the date format on a per connection layer.
  Can I change something in the format once and for all on a level username / the oracle instance level?
  
  
  Thank you
  Maxim.

  The table below lists priorities of NLS parameter: http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch3globenv.htm#g1012681

  This is why many people say that the safest way to avoid the problem of date format is format of date, hardcode in every SQL statement. A logon trigger should also be an option if you are sure that the application doesn't runs another
  ALTER SESSION SET NLS_DATE_FORMAT = «...» ».

• Swapping hard drives for change/increase the size of the data store

  Hello:

  I have an ESXi host 4.1 with 2x146GB RAID1 array (datastore1), 4x300GB RAID5 array (datastore2).  I need more space so I intend to replace 2x146GB by 2x2TB.  I'll first move virtual machines from datastore1 to datastore2, then stop the machine, Exchange records and build the new table.

  • What I need to remove ESXi cfg datastore1. before you physically remove the drives, or will start ESXi gracefully and allow me to remove the data store?
  • I'll be able to add the new data store (2x2TB) to ESXi, ago, i.e. ESXi should see table once initialized on the machine?
  • Existing data warehouses have 1 MB block size max vmdk is 256GB.  I want the new data store to have the block size of 8MB so I can have more VMDK.  I think I can fix the block size of data store when it was created, are, i.e. the ESXi installation can have warehouses of data with different block sizes, are?

  
  

  Thanks a lot for the ideas you have!

  
  

  Bob

  1.) why not just delete the GUI data store before you remove the discs?

  2.) If your controller has the disks properly there should be no problem with their detection.

  3.) Yes, each data store may have a different block size. The block size can be selected when creating the data store on disk/LUN.

  André

• How can I change the date of 1970 until 2015, because I can't reboot my iphone!

  I can't reboot my iphone, after when I changed the date from 02.12. 2016 to January 1, 1970. How can I restart my iphone? Can I repair my iphone?

  You can read about it in this post:January 1, 1970

  The short answer is that you need to take your device to an Apple Store, as when you set to January 1, 1970, the brick permanently the iPhone.

• To change the data type of control/led

  Is it possible to change the underlying data type of the indicator or a control?  I a VI that I want to use that accepts any type of data (essentially data varriant) and display it accordingly.  I have different controls selected to display data of different types in the sense of data vs decimal boolean data vs integer, but certain types of data will be of type uint32 vs int16 vs uint64 etc..  Is it possible to programmatically change the data type, so I need to have all the combinations of indicators?

  The short answer is no. The long answer is that LabVIEW has not 'generic' controls that allow you to display any type of data (apart from the variant of course). There are several ways to address this problem, but all require you as the programmer to manage explicitly each type of data you could possibly meet. Here are some possibilities (in no particular order), please let me know if you would like to help a particular implementation of these.

  1. Force incoming data to variant, use the info option to determine the data type of the original data in a case structure (open G can do this VERY easy), have an indicator on the front panel for each type of data you want and hide those unused
  2. Use a sub-group of experts on the front panel and sub - vi call of to view specific types (that lends itself very well to encapsulate your data in a class and you leave OOP allows to expand into different types of data)
  3. Use a tab with the variant (similar to option 1) control put each kind of data in its own tab, enable only the current
  4. Do a Control-X to accept a Variant option 1 under the hood
  5. Just as a string of format and use a string indicator

  That's all I can think of right now, once again, let me know if you need more information/help on the options.

• Machine virtual IOPS / s report, how to display the name of the data store?

  Hi guys

  I am new to the Foglight community, this is a great tool, and I learn a lot.

  Currently I am trying to create a simple table that will show me metric of my VMware environment: Virtual Machine name, Datastore IOPS and data store.

  However I can't find how to include data store name in the table, because it is not a measure of the Virtual Machine. I think I need to expand the scope of my table to include VMware Datastore, but I don't know how to do this.

  -Mark

  

  Check the options available it seems that it can be done with WCF (the frame behind the Foglight dashboards).  We recommend generally customers who plan to build views WCF take adequate training or our PSO people engaged in it.

  In any case I can help show a quick example of how it's done.

  Please try this on a local/test server.

  Go to Configuration > definition >

  

  Make sure that you are in my definition, and click the icon to add a view. then choose from the tables and trees - oriented line table

  

  Give a name to the view, go public and make a portlet/reportlet and apply

  

  Switch to the configuration tab and click the change for the lines and choose a query

  Under query, expand the VMware and scroll down

  

  Until you can select the query for virtual machines

  

  And press the set button.

  Your view should look like this

  

  Now you must select the columns.

  Each column has a value you can edit and there is a button + to add additional columns.

  Lets start with the name of the virtual machine - click on the button to change to your default column and choose the context.

  

  Click on the drop down menu to enter key and choose the current line (virtual vmware machine)

  

  Click on the drop down menu to access path and scroll down until you can select the name and then click on set.

  

  You have created a table that lists the names of all virtual machines.

  You can click on save. and then click test, choose a time and click the result. A new window will open a show the list you of virtual machines.
  From here you can continue to add additional columns, each time choosing the key entry in the current line and the path to the metric/string to display.

  For example, the name of the data store.
  I change the module

  

  Click the configuration tab and click the icon to add a column

  

  For the column value, that I chose defined context once again, the key input is the current row and for the path, I expand the node for the data store

  

  And scroll until I see the Proprietename

  

  If you save and test you will see the result

  

  Keep adding columns and the data you want, notice that you have arrows that allow you to control the order of the columns.

  Note that you can click Show advanced configuration properties

  

  This will give you the opportunity to see the properties of the extra table, such as header - giving you the opportunity to give a more meaningful name (name of the data store, the name of the virtual machine, etc.) to the column header.

  

  You can now go you drag and drop the table edge/report and under my eyes, you will see your new view

  

  Drop it in the main view

  

  I hope this has given you the starting point to build this table.

  As I said, I strongly recommend going through our WCF training if you plan build more custom views or hire software Dell PSO Organisation to help build you views that correspond to your need.

  Best regards

  Golan

• Date system frequently replaces 3014 and accordingly, that nothing works until I change the date.

  I turned off my computer after each use.  Quite frequently, the date system at boot is 3014, not in 2014 and therefore, nothing works until I have change the date.  How can I fix all the time?

  Original title: Date System.  Windows 7 Home Premium

  It's a Dell.  I've never opened a computer, but I just opened my old one. The only thing that looks like a battery is round, about 3/4 in. in diameter, said Panasonic 3V +.  Then a stupid question: is the battery you think?

  Thanks Ken.

  Yes, it's the battery. This is very probably a CR 2032 and can be purchased almost anywhere, even at the grocery store in the United States.

  It keeps the clock of computers running, among other things, while the computer is turned off.

  http://www.Dell.com/support/article/us/en/19/129714/en