Change the dimensions of info-layering of cultures-box from inches to pixels (someone?)

Similar Questions

• CC Illustrator changes the dimensions of the file saving in jpeg or tiff

  Hi, whenever I save a file in jpeg or tiff Illustrator ajoute.08 width and prend.08 off the coast of the height. I record with use that artboard is checked but it still changes the dimensions of the file. Please can someone advise how can I stop it doing what I need to save my files to the size of pixel in width and height, I created? Thank you.

  Create an Illustrator file to 4600 X 2000 px and export it to 72 dpi.

  This will give you the exact pixel dimensions.

  A pixel has a fixed size.

  For historical reasons, Illustrator defines a pixel as 1/72nd of an inch.

  The same 4600 X 2000 px file can be smaller and more depending on the amount of ppi that you specify.

  At 72 dpi, it will be printed as 126.8 cm X 70,56 cm

  At 300 dpi, it will print as 38.95 X 16.93 cm

• Change the dimensions of the existing layout of muse

  I created a design that is 960 pixels wide and realize that a wider page would be much better. Can I change the dimensions and the grid of the existing model? It is possible only by using InDesign and would be too good in Muse.

  Thank you

  Yes, you can change the dimension through the page properties in design mode, it would indeed.

  If I'm missing something here, please let me know.

  Thank you

  Sanjit

• change the dimensions of the PDF document

  I have a PDF document with a text box which is an ad. I need to change the dimensions of his announcement fills the whole page and it is not greater than 98mm of width and height of 133 mm.

  If possible, it should be the full version of Acrobat (but maybe not even then). Acrobat Reader cannot do at all.

• Create a mov mp4 file without changing the dimensions

  I'm working on a project for InDesign that has out of DPS.

  I take screenshot movies that are saved to the default mov format. These movies are 700 px x 400 px. This cannot be changed.

  I need to convert the mov to an mp4.

  I got SOUL but I'm confused as to how to set the output settings.

  I don't want to change the dimensions.

  What setting will convert the mov to mp4 without changing the dimensions?

  MPEG4 is one of the formats that has relationships between parameters called constraints. Specifically, the image dimensions and speed are limited by the profile and level. Here are the steps to set the dimensions of your choice:

  1. Open the export for a job settings dialog box
  2. Play in MPEG4 format
  3. Click on the video tab
  4. For Advanced Simple profile
  5. Game from level to level 5
  6. To the right of the width of the frame and the height of the frame, click on the chain link icon to dissociate the width and height
  7. Set the width 700
  8. Fixed height 400
  9. (optional) Change other settings such as Frame Rate and Bitrate as you wish.
  10. (optional, but strongly recommended for future practical reasons) click the button Save preset right of the Preset control in the upper right corner [CS5.5 and before the button icon is a diskette; in CS6, it's an arrow pointing down to a rectangle, which I assume is a disk drive.] Enter a name for the custom preset in the dialog box that appears, and then click OK.
  11. In the export settings dialog box, click OK (if you opened this dialog of the SOUL) or queue (if you started the Organization).

  The preset that you saved in step 10 will appear in the list of presets for MPEG4, so you can use it for future encoding jobs. If you have the SOUL CS6, custom presets appear also in the section at the top of the new Preset browser.

• Set a style to change the dimension - CS4

  Google and Adobe research I've done, it seems like InDesign CS4 doesn't allows you to change the dimensions of the rectangle graphic container by setting a style. But I think there are some gurus ID that could find a workaround?

  I have great graphics of the object embedded in a document of pg 30 and would REALLY like to apply a style to them that would change the width of the boxes containing without having to do each one individually.

  Is it possible to do?

  No style cannot adjust the width of an image.

  But you can adjust the width of the frame 1 - tell to do you a 150 mm wide frame

  Select another frame, then go to object > transform again > transform again (or simply press CTRL ALT 4)

  The selected object will then also this width.

  If you select a lot of elements and you want all that length and then use the command "Sequence of new processing individually."

• Using PhotoShop elements Version 9.3 14?) : I have a file I've flattened and now want to resize now.  When I try to resize the size of the document from inches to Pixels.   When I choose to change - there is no other choice "Pixel".  I'm in., Points,

  Using PhotoShop elements Version 9.3 14?) : I have a file I've flattened and now want to resize now.  When I try to resize the size of the document from inches to Pixels.   When I choose to change - there is no other choice "Pixel".  I'm in., Points, cm, but no Pixel option.      I have the following options checked: resampling, constraint proportions, scale of Styles.

  The plan was to add a frame of 60 pixels around the 5.56 a picture and then framed 8 x 10 x 7.

  Go to Image > resize > canvas size. You should be able to find the scale of the pixel in the menu dropdown.

• Is it possible to change the dimensions of the stage to the editing in Adobe animate CC?

  Dear community:

  After spendig years to forget my beloved Flash and learn to master the animate dashboard superb I'm back now to formerly Flash, lack of edge animate and experience some old restrictions in CC animate it that drive crazy me. I hope you have a solution for the problem:

  I use external Java - / HTML5-based interactive animations (formerly RIA) Java - / HTML5-based Windows Universal applications (apps-in-a-app) through the MS WebView object. These applications must be able to recognize the changes in orientation of devices and the content in the new landscape to portrait (resp.). Animate of edge did an amazing job to do this:

  Edge animate, the scene was just a symbol that could be changed to the timeline, even in its dimensions. In animations to edge-come to life, he lived above all layers in the timeline. So I opened the way to, say, image 0 to certain dimensions of the landscape and to, say, 100 image to the dimensions of the picture. Using build-in orientationchange action then activated the app is gone to the frame when the user has changed the orientation of the device. I found this easy way to meet policy changes a big improvement.

  However, on a canvas created in Adobe HTML animate CC (formerly Flash) scene seems to be always static, as if it were the case in bad times of Ol' Flash '.

  My question is: there's a possibility to manage the scene as a single clip on top and resize the dimensions to an arbitrary key image as if it was possible in Egde Animate in Adobe animate CC?

  Otherwise, I would like to make a suggestion for this feature of the art Adobe animate CC.

  Thanks in advance - Jochen

  ClayUUID thanks for your reply.

  First of all, I definitely know the difference between Java and JS. It was just a typo which I apologize deeply. Please read JS instead of Java.

  Plus, I could not implement your canvas.height/canvas.width in the Panel shares. However, I tried the following and it works:

  var page_canvas = document.getElementsByTagName ("canvas") [0];

  stageWidth = page_canvas.width;

  stageHeight = page_canvas.height;

  page_canvas. Width = 600;

  page_canvas. Height = 400;

  However, this technique requires a complete programmatic, the new style of all the elements of the scene (layers). An alone cannot do this task visually (as designers would do, or he is so on board animate), and we can't do it on different time periods (as we have beachfront animate). It would be a great improvement, Adobe would incorporate these characteristics of edge animate animate CC - at least for HTML5 canvas projects.

  Finally, yes it is possible with a lot more afford to animate CC.

• DisplayImageFile() does not change the dimensions of the image control

  Hello

  I put in an image with DisplayImageFile() control image + assigning to the attribute of control ATTR_FIT_MODE = VAL_SIZE_TO_IMAGE. The image size is larger, then the size of the control and I want the control to resize to the size of the image.

  It works fine except when I ask the dimensions of the control with GetCtrlAttribute (panel, control, ATTR_HEIGHT, & height), I get the original size (before calling DisplayImageFile())...

  It seems I missed something basic...

  Environment: LAB Windows CVI 2012, Windows 7

  Thanks in advance

  Ramy

  I don't know if you still experience this problem or not, but I came across this discussion now and wanted to point out that this could happen if your picture controls if it is covered by another control or is it hidden altogether (and there might be other similar situations that I can't think of right now).

  When this happens, the CVI runtime can pull the image directly on the image. Instead, he plans an asynchronous action that will redraw this section of the Panel from the back to the front (if it's just overlapped, not hidden). It is only in the later action that the image is applied to the control, and it is only then that the control is resized to fit the image. This may seem immediate to the casual observer, but, because it is asynchronous, you can't try to get new size immediately after calling DisplayImageFile, because the image is not yet in control at that moment.

  Ironically, this occurs only if the control has already been set to the image size at the time you call DisplayImageFile. If this isn't the case, then the new size is applied when you later change the mode made programmatically. Whereas if the adjustment mode has been already updated the image size, trying to programmatically set the same value of the image size has no effect and nothing happens then.

  If this is what is happening, one way around this would be to call ProcessDrawEvents or ProcessSystemEvents immediately after the call to DisplayImageFile. Unless the control or Panel has been hidden way explicit, which will require the drawing action will take place at this time, and you should then be able to get the new size of control at any time after that.

  Luis

• Resize a picture does change the dimensions?

  original title: resize Photo Gallery

  resize a picture really does change the deminsions of the photo, as of 4 "x 6" to 3.5 "x 5", or is it simply adjust the resolution? "

  The size is resolution / pixels horizontally and vertically.

  Also known as crop or zoom in on a certain place on a photo.

  Resizing to compress the entire file, while retaining the proportions,

  Resize in wl Photo Gallery is not an exact science, it gives references waves to the dimensions that you posted almost useless.

  First of all, I would like to ask what you are trying to do and why?

  Microsoft Paint has better / more accurate way to resize the files.

  Which can be done by the percentage of the existing file or Pixel sizes, which is most useful if you need an exact pixel size for avatars...

  http://Windows.Microsoft.com/en-us/Windows7/using-paint

  I personally use the image manager of office for these types of changes.

• change the position of several layers

  Hello

  I have tried many and find many things by google, but I can't find a working solution.

  I have about 60 layers in my Composition. They're all the same position at the moment. The idea is to browse through the Articles and change the y-position with an offset value.

  What I've learned so far is that there is a layer.property("Transform").property ('Position'). First I thought that it is a table like [x, y, z], but this seems to be only one... property.

  Now I can check if my layers in the 'Position' property...... but I already knew. I found no way to set or even get all values.

  I know how to set the position when I create a new layer, but this seems to be something different.

  Is there a possibility to change the Position of a layer existing script?

  Best regards

  G

  For the position or any other property in the layer, you must use the method .setValue(theNewValue).

  If the property contains keyframes, or if you want to add a keyframe, it will throw an error, however, to check if the property already has keys, in this case, you can use the method .setValueAtTime(theTime, theNewValue).

  Example:

  Layer.Property ("Transform"). Property ('position'). SetValue ([x, y, z]);

  Layer.Property("Transform") .property ("Position") .setValueAtTime (0, [x, y, z]);

  Check the after effects Scripting guide (pdf) for more information on this.

  Xavier

• Change the dimensions of the logo on the Login Page.

  Hello

  I changed the logo on the login page, and the image appears distorted and very small.

  Then when I increased the size of the image, the image is not get displayed instead a cross mark appears.

  Can help you the image with increased dimensions display.

  Thank you and best regards,

  Patricia

  Have you tried to bounce the application services (the server cache) and see if that helps?

  Tips to customize the E-Business Suite R12 Login Page (MainLoginPG) (Doc ID 741459.1)

  How to change the System Wide Corporate Branding Image in the E-business Suite (Doc ID 395663.1)

  After the upgrade to version 12, my Images Corporate Branding are distorted. Why is this? (Doc ID 1278155.1)

  Thank you

  Hussein

• Essbase error when you try to change the dimension through the rule files

  Hi Knowledgebank.
  
  I'm new to Essbase. I'm trying to change my dimension through the rule files and Iam getting error (Dimension build setings).
  
  Example:
  
  My current dimensiion is:
  
  MARKET TOTAL
  ASIA
  Singapore
  CHINA
  HONG KONG
  NORTH AMERICA
  SOUTH AMERICA
  
  
  I am trying to add a few new countries of SOUTH AMERICA and I can't. Is there a step by step guide to achieve this?
  I'm following the documentationi but still errors.
  
  Help on this is going to help me go further.
  
  Note:-I am able to load the data successfully.

  'TOTAL MARKET' 'COUNTRY'--> header I have jump while loading
  'SOUTH AMERICA' 'BRAZIL '.
  'SOUTH AMERICA' 'ARGENTINA '.

  As above, your first file is correct if you use generation referance.
  Your mapping in the rules file should be like this.
  Gen2, Gen3 TOTAL MARKET, MARKET TOTAL
  'SOUTH AMERICA' 'BRAZIL '.
  'SOUTH AMERICA' 'ARGENTINA '.

  For generation Referance always starts on Gen2.
  Gen1 sets the level of the dimension. If the dimension is not there, you must set in the definition of dimension not in Field1.

• Change the blending mode of layers

  I have a file with a couple of hundreds of layers, and I would like to change the layer blending mode.

  Is there a way around individually by clicking on each layer and change the layer of a mixture of fashion at the same time?

  If I select several layers merge ghosts mode option.

  You can apply Styles, or Styles of layer of paste on more than one layer at a time.

• How can I change the dimensions of a PDF with multiple pages?

  I have the PDF of a book that I now want to crop to print to a different paper size. I have space margin to play with what it makes sense to just edit the pdf file it. Also, I've lost some of the original files needed to change the original in inDesign.

  Thank you.

  Ah... Yes. I assume a bit. Open the area of print production and use areas of the overview page. Off the top.of my head with my phone to answer anyway. Could be called something slightly different.