Change the DNxHD Vs AVCHD on PC performance
What Codec works best on PC DNxHD or AVCHD?
Thank you
Great!
I used CS6 and Avid. Is it possible to add the Avid codec first, encoder and Prelude? I understand there are downloads for the CC, they will work in CS6?
Thank you
Tags: Premiere
Similar Questions
-
Why is my desktop standby stop so often?
It appeared sometimes several times per day or night. He stops consecutively, at random, at any time of day or night time. Even when I was with the computer, there is no incentive to me. The screen is blank. My computer nevers switch down. It's on 24/7-24 hours and 7 days, 365 days.
It happened like this:
1. you can hear the exhaust off the computer fan all of a sudden. There was no incentive. You can hear computer calmed down suddenly. The fan can be seen from the back of the grid of ventilation of the processor of the computer of the metal casing.
2. the screen monitor suddenly stop. The screen is blank. The indicator light on the bottom of the screen of the monitor is always lit. He showed the monitor screen is on and running.
3. When you look at the led on the computer, it is still lit. This shows that the computer has on photo and runnig. It is dormant, however. He showed the computer CPU is entered in mode 'sleep'.
4. whenever this judgment occurs, I would like to shut down the computer and restart the computer from scratch. I pressed the power button on the computer to stop it.
5. I then press again the start/stop button to restart the computer, restart the computer, and then when she comes back to life, I clicked to restore sessions, and then I keep using the computer again.
6. the process of restarting the computer was like that, as stops have been going like that for five months and is always like that, because I have been unable to solve. The point of contact in the power button is not more urgent are frequent.
7. I changed the VGA cable as I said by a computer hardware that my problem could be due to the VGA cable is old, as in the VGA cable copper wire that feeds on the computer to the monitor screen can be broken or twisted, and so the video signals are not stable to feed the data to the screen of the monitor.
8. Although I don't think that was the case, as my cable never touched the ground, or cluttered or kick or broken, I still went ahead to change the existing cable 15 pin VGA to 3 years with a new as it was only 3 males - the range of the cheapest I found in the shop costs...
9. However, even if the VGA cable is changed, the stop is always the same, as before.
10. on another month, I learned by my friend that I should change the setting in the computer mode 'sleep'.
11. the new settings made in start/programs/system and Security / Option/power Power Plan/High Performance / 'Turn off display' to 'Never' and 'Put on the eve of the computer' to 'never '.
12 even if I changed the setting of "Balanced (recommended) 'High Performance'" and two high-performance setting has been changed to "Never", the judgment fixed computer sleep mode, and as usual, no warning, the screen of the monitor erased.
13. it seems the Option "power" and "Power Plan" and "Balanced" or "High Performance" in Windows 7 does not work. Window 7 does not in my computer.
14. whenever I rebooted and restarted the computer, it is some normal time to see the operating system, repair files stop suddenly, before may be back from normal window of operation conditon.
15. for more information,.
My computer is not a brand. It was customized and installed. He bought two or three years ago. The use of the 350 GB hard drive is used by 50%. The computer in the past goes to sleep when there is no movement of the mosue for 15 minutes, or when not in use. He wakes up again when there mouse moves to restart the CPU and turn on the monitor screen.
Now, he had problem with this kind of stop suddenly attack never wake up its "sleep" again during the month five, which I believe it was several viruses in the files of e-mail in the past months, and when it is very likely that I downloaded from CNET some cleaners or anti-spyware. I don't know what problem is.
I then withdrew them a month later of the program/Control Panel / uninstalled program. On the advice of my friend, I then changed version free download AVG.
16. the information contained in the computer, start/program/computer/properties, gives the following information:
It's Intel Core Due E7500 @ 2.93 Ghz, 4 GB of Ram, 32-bit operating system, windows 7 Home Premium, 2009.
It is a Microsoft Firewall protection and is installed with fre download AVG anti-virus protection. He is shown to start/program/system and security / firewall /- and he said: 'Stat window firewall' is 'on '.
17, finally, with the light of the foregoing, I would sincerely ask the Microsoft community to help solve this problem of closure. I would like to thank all the people in the community who can help me in advance here.
18. I hope to hear your solutions with you. Thank you.
Run "cleaners" or optimizers may have caused a number of problems.
And since you have them installed some time ago a system restore won't help.
Run the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html
Run a scan for malware http://www.malwarebytes.org/products/malwarebytes_free/
Maybe to repair your installation of win
Ensure that the chipset drivers have been updated by the author of the motherboard
-
My email has been hacked and used to send Spam. I have to perform a virus check, or simply change the password?
Do not install or run an anti virus app.
How do you know that your email has been "hacked"? It is a common practice for spammers to forge an envoy from the e-mail address. It may be that your email address has been misused. There's nothing to do if this is the case for you. The spammer will soon pass and usurp another email address.
It's a good idea to immediately change your password by email if someone would actually managed to access your e-mail account.
-
"Cannot change the priority. The operation could not be performed. Access denied. "
When you attempt to change the priority of a process in the Task Manager (no matter what process, I've tried a few) I get the error message: cannot change the priority. The operation could not be performed. Access denied. It is while being logged on as an administrator. Would appreciate a solution.
Since Windows Vista and Windows 7, a logon administrator account always uses a standard or limited account for certain purposes. To access these properties, you can run a program using the "Run as administrator". To run as an administrator, you right-click on a program and select "Run as Administrator" in the right click menu.
Some processes of the system, such as services, you cannot change even as an administrator. Come on in "show processes from the user all the" which will ask for permission. Then reopen the task Administrator Manager and then see if you can change the priority.
-
I have bad performance in the games, can I change the video in my laptop?
Hello.. I have asus X54H notebook pc (2 GB RAM-320GBHDD, mother-INTEL dual core Model-k54L card processor)... WINDOWS 7 ULTIMATE 32 BIT, I identify for intel hd grtly install windows 7 on it... I get a updated windows intel HD Graphics... but it is not good... It uses the cpu memory while playing games or any other work & games does not not smoothly.my question for you is I can update my Intel HD Graphics NVIDIA graphics card... because when I click on software update driver in Device Manager, it shows 2 chart standard vga compatible hardwares & intel HD Graphics When I uncheck, there is the list of manufactured products & I selects nvidia... It shows nvidia geforce6100(Microsoft Corporation WDDM) & MANY more versions of nvidia... When I select it. Start Windows, installation of software & when I restart my computer, it doesn't have to update... It showing yellow mark on it... so please tell me how can I update. I go to the website of nvidia also, but he could not scan my system... it says an error has occurred... Help, please... (Sorry for my bad English)... Thanks in advance.
You have a portable computer, get you the drivers from the manufacturers mobile site and no windows update or Nvidia and if you had read the page nvidia drivers you needed to know this.
You can't put to day/change graphics on a laptop, graphics performance are what you get and not editable
http://support.ASUS.com/download.aspx?SLanguage=en&m=X54H&p=3&OS
If you have a desktop computer, you can change the graphics card.
-
What a fool has decided to ease the paths in PS CC with no way to change the color or contrast. Now I have to find a clear channel to perform the pat to contour photo... Adobe - fix!
Cc of Photoshop
@
One of the first things I do after installing Photoshop is to disable anti-aliasing for the paths for this reason. Paths are much easier to see, use and follow with this option off.
-
JavaScript to perform the Action on the ground form - change the fill color according to requirement
Hello world
I apologize if this question has been asked already - but I was looking for the last hours of the couple and not finding what I need. I have a PDF form (created from an excel file) and need to change the fill color of a field drop-down list box to, based on the selection made by the user of this form field.
Details - I have several questions on the application form. I have install a form field list box for each question so that the user can select the following options:
Yes
NO.
Not sure
I see in the Properties menu of the form field that I can perform an action when their "clicks of the mouse to the top" as the trigger (option run JavaScript); but I do not know what script to enter to do. This is where I need help
So I need the script when the user selects one of the listed options, the fill color will change depending on the selected answer:
'YES' changes fill with green color
'NONE' red fill color change
Yellow fill color of changes 'UNCERTAIN '.
Please let me know if you need more details or a better explanation of what I need. Thank you for anyone who can help!
PS - I'm a complete amateur in any type of JavaScript or codes, so I may need some explanation or if this is not possible.
Do not use the mouse event to the top, but rather, you can use the custom following validation script:
Custom script to validate combobox
(function () {}
Switch (event.value) {}
case study "Yes":
event.target.fillColor = color.green;
break;
case "No":
event.target.fillColor = color.red;
break;
case 'uncertain ':
event.target.fillColor = color.yellow;
break;
by default:
event.target.fillColor = color.white;
break;
}
})();
-
Can I change the time sampling real Graphics Performance
I am preparing a demonstration and want to display the allocation of resources in real time using vSphere performance dashboards. Unfortunately, the default sampling rate and an average of periods are not optimal for display assignments for resources with our demonstration. Can someone tell me if there is an easy way to change these default values?
The sampling rate for the graphics in real time is 20 seconds, which is probably OK, but I WOULD change for 10 seconds. However, the main issue of concern is the number of samples in which this average is calculated. This value seems to be very high (I think I saw 300 in a document). Because this number is very high, the changes I make say every minute (for demonstration purposes), allocation bands don't really show up very well in vSphere performance dashboards. For example:
If my host has had 10 GB memory active during the last 5 minutes and my demo releases suddenly a very large part of this memory, the performance table the sudden deallocation with the last word on average 10 minutes of data and shows a gradual decline in the allocation of memory.
This behavior is probably what is desired in a system of monitoring, BUT for my demonstration, I want to show a more realistic view of the allocation of resources using vSphere performance dashboards. This could be accomplished if periods of rate, for a sample mean are configurable.
Any help is greatly appreciated.
On the other hand, I think it's that they do not change settings realtim. It's good for my purpose
I do not know the slow answer due to the memory alloc/dealloc.
BTW if you think the answer above resolved your problem, you might mark it as response.
-
Unable to perform the backup after changing the password for SYS
Hello everyone, I'm getting the "unable to perform the backup because the database is closed" error after performing a backup scheduled on the database. The database is clearly open, already tried rebooting the database/system, but without success. This is probably related to the very recent change of password for SYS. As we changed it, we were able to run the backup... Can I ren hollow backupset backup RMAN command, but without success with Enterprise Manager.
Does anyone have an idea? Thank you!
ATT,
Gabriel.Have you updated the password in addition to credentials on the OEM... Otherwise, please update and try again.
-
Change the display performance
Hello
I use Indesign CS4.
I need to change the display for the Application performance / high quality documents. How should I do it in javascript.
Thank you
Karthik B
Hi Karthik,
You can use thie JS Line:
app.displayPerformancePreferences.defaultDisplaySettings = ViewDisplaySettings.HIGH_QUALITY;
This is for game display application.
THX
csm_phil
-
I have two report in a page as A report and B and I want to change the header color report only a header, but it will change the color of the header of the report I use this code in the css section
table.uReport > thead > tr > th {}
color: red! important;
}
but it will be the effect on the two report kindly can you help me
Mr.javvi wrote:
I have two report in a page as A report and B and I want to change the header color report only a header, but it will change the color of the header of the report I use this code in the css section
{table.uReport > thead > tr > th}
color: red! important;
}
but it will be the effect on the two report kindly can you help me
Specify a static region ID for each region and which applies to the to box in your rule of CSS selector to target the report only in this region:
#report-A table.uReport>thead>tr>th { color :red !important; } -
Hyperion Planning
GPE, Fusion edition, 11.1.2.2
Smart View 11.1.2.2
When running Smart View Ad-hoc queries, selection of the Alias in the Essbase Ribbon does not.
When I start a new query, the Alias in the Ribbon of Smart View is always set to None; but often, not always, the selection will change itself no default - usually after I refreshred/zoom a few times. He starts a time past, I change the selection of the Alias in the Ribbon in none, but it changes just itself by default again.
The option to display the name of the Member is defined on behalf of members only. (This is the default setting for this option and I usually begin with all the options, by default).
This problem started after that we went to 11.1.2.2.
If neither know why the Alias / None change automatically in the Essbase Ribbon?
Thank you
Veronica
There is a way that you can set for your connection
When you use shared connections to connect to your application, you do a right click and say "Add to private connections". Once you have added to your private connection, right click and click 'Set Alias Table'. You can do this on a connection that you have added to private connections
Concerning
Amarnath
-
Due to vision problems, a long time ago I changed the background color for the yellow poster like stark not white. The old system of color choice was fairly easy to change, and one time in a whike I let the colors of the site work like some things were hidden using my colors.
Several months ago an update of Firefox threw all access learned and now I can not for the life of understand me. I'm more able to perform any color choice. By clicking on the MACHINE shows content but everything is yellow and there is nothing to change.
An update?
19john28 said
Adding a patch complex to solve a simple function seems to be gilding the lily. Firefox you address the simple check box to change the colors.
Hi John, here on the support forum, we work with the version of Firefox that we know today. You can submit proposals for amendment of functionality for future versions of Firefox here:
https://input.Mozilla.org/feedback
It took several years for Firefox to get full support for users of high contrast themes, so I do not expect this choice to be removed. However, if you think it might be facilitated so that everyone can understand, please do not hesitate to use the entry site to suggest another way to implement the selection.
-
How to change the default cache for firefox folder?
I created 4 GB RAM (4 GB of my RAM is now a hard Local drivem who has reading speeds get almost 400MBps) using software Salam ( http://memory.dataram.com/products-and-services/software/ramdisk ). I have installed firefox in this drive to increase its performance. But until I put my cache to this player, I can't do everything more quickly than before. I am a heavy user. I have the following add Add-ons installed that wreak havoc on the speed of firefox.
1 VideoDownloadHelper
2 Unmht
3. built-in Google Calendar
4 Dashlane password manager 3
5 progress
All enabled and latest updates, other that the other 4 disabled add ons.So I need to change the cache directory. I tried this solution https://support.mozilla.org/en-US/questions/768867 .
I went to about: config, browser.cache.disk.enable is true and browser.cache.disk.parent_directory, I can not find.Please give me a solution to this. Thank you.
That preference must be created by the user.
See this for more information:
http://KB.mozillazine.org/user.js_file#Adding_user.js_entriesMore precisely, this:
Move to the parent directory of the directory browser cache
user_pref ("browser.cache.disk.parent_directory", "D:\\Mozilla\\Firefox\\"); -
I tried to connect it to my Virgin Media email account and get the message on the activation of cookies and javascript. When I followed all of the options (which are set out in all your help pages) I can not connect on my email account. Other Web sites that use user names and passwords seems to be affected. The only problem I see is the site of Virgin Media. How can I access my email account now.
To change the setting of cookie
Go to the Firefox Panel its on the far right last button.
Go to options and then go to privacy
and make sure that it says Firefox will: remember the storyIf it still does not work, I would recommend reset firefox.
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions and preferences.- Sites Web open is not recorded in less than 25 versions of Firefox.
To reset Firefox, perform the following steps:
For Firefox versions prior to 29,0:
- Go to Firefox > help > troubleshooting information.
- Click on the "Reset Firefox" line
button.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
For Firefox 29,0 and above:
- Click the menu button
click Help
and select troubleshooting information.
Now, should open a new tab containing your troubleshooting information.
- At the top right of the page, you should see a button that says "Reset Firefox"
. Click on it.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
Thank you.
Maybe you are looking for
-
I need help
-
Now on windows 7, the games running slow - update video card driver error message and/or turn on hardware accelerator. Sony supporting not - how make to identift video card in my laptop?
-
I have questions about Ready Boost.
It seems that I should be able to expand my RAM, with a USB key. When I try to activate it, I said it is already in use and can not use it on this USB key. The laptop is used, then maybe the old user installed on the hard disk. How can I be sure, he
-
How to downgrade Windows 8 Pro - license keys
In order to exercise my rights to downgrade to Windows 8 Pro for Windows 7 Pro (or business Vista) I need a valid key of Windows 7 Pro. How can I get this key? When I called support license (number of times) I was told that I should use a key of an e
-
At creative cloud for a year now. Each month, the price was $14.99, now a year and my first installment of the new year has come out as $24.99. Why is this?