Change the easy keys on P-series of satellites

For some reason, I can't change the settings of the so-called easy keys (it is the keys on the computer itself above the keys F - which enables access to internet, multimedia, play, stop, and so on).

I wonder if someone can tell me why there is a program where I can decide wether I want to the Internet and multimedia keys to access internet or something else. It only will allow me to access the drive media and internet. No matter how many times I change media keys such as Media Center or something else, it always goes to Media Player.

Any ideas?

Hello

If you didn t already verified, if you can change the settings of the keys through the program of toshiba, then won´t you have a bit of luck to affect your own
programs to the key, because it s statically.

There may be a small program (not toshiba) which can handle these keys? The only way to find this point is google around and search for it.

Greetz

Tags: Toshiba

Similar Questions

  • How to change the product key for Office 2007?

    Original title: product key used.

    When I loaded Office 2007 I used a product key with any additional use.  I try to enter a different product key, but impossible to find how to do this.  Can you please direct me to the correct site to do this?  Thank you!

    Hello

    It would be easier to uninstall it and then reinstall it by using the different product key.

  • Change the line key notify labels via sip

    Hi, I was wondering if anyone knew if the following text was possible. Is it possible to change any part of the config of the series phone Cisco SPA via a SIP notify or similar method. I have an asterisk server, where we have created a system to move a device for extensions without requiring a reconfiguration/reset (in the most anticipated cases for the function, the new phones or complete swaps may or may not require commissioning). The problem with this so that when you move Extension A of device 1 device 2, clearly labels don't update unless you change the configuration via the web gui or commissioning.

    I was looking for a way to change the line key labels without having to reboot via a SIP notify message similar to how you can tell a SPA phone to resync notify its config via sip.

    Research on google seems not to show many results, so I tend to think that's not likely to be possible. So I asked here as one of the last resorts before the redesign on the part of the idea.

    The web GUI is not an option for me due to some phones may be behind various firewalls, proxy or the webgui unaccessable.

    Thanks in advance

    Avoid you SIP inform as well as changing the configuration. But the buttons on the phone are mislabeled.

    I call it serious bug, you have no system for deployment.

    But it seems that you accept such behavior as characteristic of the system that you designed.

    It's your system - your opinion is decisive.

  • Change the product key to use COA OEM during the product upgrade

    I found the kkid106 question "can I use a product key Windows 7 OEM to a retail facility.

    But as it is not my particular case, I want to be sure and make the issue.

    The question is on a clean install of Windows 7 Home Retail using Windows 7 OEM Home.  My case is not a clean install.

    I have the following two scenarios:

    Scenario 1. A computer with Windows XP Pro OEM who got the original damage.  I have an Image backup which I bring to a Destination with Windows 8 OEM computer.  I get a retail upgrade of Windows 8.  I restore the Image to the destination computer, and then upgrade old XP Pro OEM with retail upgrade to Windows 8.  Technically I find myself with a computer without a license since the upgrade come from an OEM from another computer.  Now, I change the product key by using the Destination COA OEM computer to make a licensed computer.

    This scenario is correct.  Can I validate the license online or by phone?

    Scenario 2. A computer with Windows XP Pro OEM who got the original damage.  I have an Image backup which I bring to a Destination with Windows 8 OEM computer.  I have an Upgrade download Windows 8 without product key.  I restore the Image to the destination computer, and then upgrade old XP Pro OEM upgrade download to Windows 8.  I find myself with a computer without a license, because the upgrade is unlicensed and comes from an OEM from another computer.  Now, I change the product key by using the Destination COA OEM computer to make a licensed computer.

    This scenario is correct.  Can I validate the license online or by phone?

    Hi Jose,

    I would like to send you the items provided, they talk about how use OEM keys with the retail copy.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/can-i-use-Windows-7-OEM-key-with-a-non-OEM-disc/7788dfa2-94a7-4DB3-8bcd-b0e109bd7b95

    http://social.technet.Microsoft.com/forums/Windows/en-us/c805da6b-cbd2-4a40-9ea7-cc17391cf4bf/can-i-use-OEM-Windows-7-HP-product-key-to-install-64bit-OS-off-of-retail-disc?Forum=w7itproinstall

    Thank you

    Waseemulla S

  • I need to change the product key

    We work with images here and we have a lot of machines that are identical.  We have activated Windows on the original image and did all the updates before creating the image.  Now, when we use this same image, it is still saved and activated with the initial machine where the image has been created, but the key to use is different because it is another computer with a new Microsoft Windows XP sticker (certificate).  I used the "KeyUpdateTool_enu" downloaded directly from Microsoft and after you enter the new key, it says that it cannot update the key.

    I tried the msoobe /a registry proposed on the site of Micrsoft hack and it says that Windows is already registered.

    So what I want to do is to just change the product with a new key.  The key corresponds to the version of Windows, so this isn't the problem.

    Thanks in advance.

    Its slow but it works as long as you don't have too many computers:

    Windows product key update tool:
    http://www.Microsoft.com/genuine/selfhelp/XPPkuinst.aspx?displaylang=en&sGuid=4d61dc27-1f91-4B1E-b73a-ab5ccc9a32a3

    Change the product key on Windows XP
    http://blogs.TechRepublic.com.com/window-on-Windows/?p=672&tag=nl.e064

    How to change the product key of Volume License on a computer that is running Windows XP Service Pack 1 and later versions of Windows XP
    http://support.Microsoft.com/kb/328874

    J W Stuart: http://www.pagestart.com

  • change the product key for win xp 64-bit

    Im sorry, new to this forum but who want a win xp 64 - bit product key change. I installed os with the key to the business, but I want it back to oem sticker on the box of the computer.

    How can I do?

    Thank you

    Change the product key on Windows XP:
    http://articles.TechRepublic.com.com/5100-10878_11-5034890.html

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Change the product key

    Hello
    The situation is like this: I have 10 Acer laptops with linux installed on them and 10 Windows XP home sp3.
    I have instaled on laptop and after that I created an image of the hard drive and installed on a computer to second and third.
    The problem is that all 3 computers have the same product keys. I want to change the product key.
    Before I created the image I activated the license and I tried to change, with a few small programs, the product, but keys with no luck. Is there a way to do this without having to reinstall the operating system?
    Thanks in advance.

    Given that you have a valid Windows XP key license and product for each computer, try this:

    1. run the registry editor and change at least one digit of the value of this key:

    HLM/Software/Microsoft/Windows NT / CurrentVersion / WPAEvents / OOBETimer

    2. click on start > run and enter this command:

    %systemroot%\System32\oobe\msoobe.exe /a

    3. Select Yes, I want a phone rep > next > change product key.

    4 type the new product key, and then click Update.

    5. turn on.

    WARNING: Incorrectly editing the registry can damage your system and prevent Windows to start. Before you do, back up your important data, make a restore point and make sure that you know how to repair a damaged system.

  • How can I change the product key Windows 7 starter edition

    Hi all

    I tried to change the product key on my netbook, because I had to replace the hard drive and I used my recovery disks of the brothers that he has the same exact model. However when I had done restoring the product key is also the same so I wanted to put the original back on.

    I used slui methods both properties before, but neither give me a way to change the product key at the moment. When I go to properties it says only: windows is activated without any options to change of key and when I run slui a window appears which says activation succeeded.

    Am I missing something? or is it because its Windows 7 starter?

    Any help would be appreciated and thanks in advance

    Click Start, type: CMD

    Right-click on CMD

    Click on run as administrator

    At the command prompt, type the following commands:

    slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

    xxxx-xxxx-xxxx-xxxx - represents your product key

    Press enter on your keyboard

    Leave the command prompt

    Restart your computer

  • Change the product key for Windows 7 Code

    I bought a package of Windows 7 from a supplier without realizing it was a distribution of subscription "not for sale". It is now installed on my computer after a painful migration from a dying hard drive which had Windows Vista installed. The old drive is now corrupt and not repairable.

    When I tried to record the installation, I found that he was blocked. I have to make sure that it is for the reason above somehow. How to check this?

    It seems I have to buy another Package of Windows 7 but I don't want to do a fresh install since I went to great effort to set up the installation on a new SSD and have all of my applications transferred intact.

    Is it possible to just change the product key of the new package to apply to my existing install without having to reinstall everything?

    Just for the completion of this thread, I decided to pass my final action to get my computer system operating system up-to-date.

    Assuming it was a MSDN product licensed, it was repackaged in a retail store packaging and sold as such.

    Needing my computer back to the status of full support, I bought a 64-bit edition (non - OEM) of Windows 10 full retail on USB media. Is it installed just fine on top of the MSDN license of Windows 7 and allowed me to install without erasing the contents of the disc. My applications and drivers are intact. Windows 10 also all updates installed correctly.

    This allowed me to remedy the situation without having to re - install everything that would have been very time consuming.

    Thank you for your help.

  • change the product key on windows 7 ultimate 64-bit full

    Let's make has a history very very short.  Earlier this year, I bought 4 copies of Windows 7 Ultimate full 64-bit for internet and loaded mrechant on 4 machines (3 upgrades from Vista and 1 new installation) without a hitch.  The software was perfect for a few months until recently Microsoft me notified that the software was not "authentic".  Apparently this software was not allowed to sell in the USA.

    In any case, if I buy a new genuine Windows 7 Ultimate Full 64-bit version, can't I just change the product key to solve this problem?  I know I need to ultimately get 4 copies.

    Thanks in advance!

    -Doug

    Click Start, right click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click change product key

    Enter the new product key.

    How to update your product key

    http://www.Microsoft.com/genuine/selfhelp/Win7Pkuinst.aspx?displaylang=en&sGuid=03838351-5d79-4ffc-90c7-973062d2676f

  • Change the ISAKMP keys

    I have a Pix 506 running v6.1 (2) that I need to change the ISAKMP key on. When I entered the new type-error telling me that there is already a key, but I can't find how to clear the existing key. Any suggestion is appreciated. -Pete

    Upload your Pix on a tftp server config. The stored configuration file illustrates the keys in clear text.

    -Andreas

  • What are the security risks by allowing a program to change the registry keys in Windows 7, without knowing what are the changes?

    Original title: security risks by allowing a program to change the registry keys in Windows 7, without knowing what are the changes?

    What are the security risks by allowing a program to change the registry keys in Windows 7, without knowing what are the changes?

    Hello

    If you had made any changes in the registry without taking the backup copy of the registry, then there could be chances that your computer can find themselves in no situation to start and finally end up in the reinstallation of the operating system; This is why it is recommended to take a backup changed in the register of representation.

    Before editing a registry key or subkey, we recommend that you export, or make a backup copy of the key or the subkey. You can save the backup copy to a location that you specify, for example, a folder on your hard drive or a removable storage device. If you make changes that you want to cancel, you can import the backup copy.

    . Are what program you referring?

    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

     

    Back up the registry:

    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • How to change the product key because it uses the product key previous I have used before

    Original title: Windows Anytime Upgrade

    I used an upgrade product key to Windows 7 Ultimate edition. However I had problems with it so I want to use another, but whenever I click on it, he's trying to update with the previous key. Is it possible to "get rid of" the existing key out there so I'm able to use my new?

    Hello eemiaturner,

    I usually don't link to the non-microsoft pages, but I couldn't find a 'How To' with screenshots.  The following URL shows how get you to the section change the product within Windows 7 key.

    http://www.sizzledcore.com/2009/10/26/how-to-change-Windows-7-product-key/

    You can also try the command line to change the product key:

    1. Click the Start button, and then type: CMD (in the field "search programs and files" in the Start Menu)
    2. The Start Menu displays "CMD.exe."
    3. Right click on the file CMD.exe and select run as administrator.
    4. In the CMD window, type: slmgr.vbs - ipk
    5. To activate windows after changing the key, type: slmgr.vbs - ato

    I hope this helps.

    Marilyn

  • I have a wireless printer and changed modems and need to know where to go and change the security key to make it work wireless

    I have a wireless printer and changed modems and need to know where to go to change the security key for the printer works wirelessly.

    I have a wireless printer and changed modems and need to know where to go to change the security key for the printer works wirelessly.

    The method depends on the printer. Read the instructions or uninstall, and then reinstall the printer. It will ask you the modem settings.

  • Change the programmable keys on the Treo Pro screen today

    I just bought a Palm Treo Pro, and I'm trying to customize it.  Can I change the right key on the screen today?

    Right now it says Internet.  How can I change that to the notes, for example?

    Also, can I add items to my list of screen today?  I've already customized the list according to the default options, but I would like to add a program that is not on the list?  For example, I have spots on the list now, but how do I add Notes as well?

    Thank you.

    ricardopalm wrote:
    SWOP key. I don't know where I found it. Just google it.

    This seems to be the official website. Haven't tried, but it seems interesting:

    MobiSapienZ: Downloads - Windows Mobile Pocket PC - KeySwop

    http://mobisapienz.com/index.php?option=com_jdownloads&Itemid=82&task=view.download&CID=57

Maybe you are looking for

  • Cannot delete backup iCloud

    Hello iCloud storage said I'm using 3.71 GB as "Backup" (yellow bar), but I did not all backups (see the screenshot).  I have disabled all backups, delete photos, basically everything but it is always showing 3.71 GB is used and I have no way of know

  • Should what kind of RAM I use for A50 101?

    What type of ram can I use for A50 101

  • Update system on t450s - missing drivers

    Hello I noticed this system updated on t450s (20BX) running Windows 8 is missing a driver for NETWORK card wireless Intel (7265/3160 Intel wireless LAN driver). It seems that the driver is excluded completely because it is not even be downloaded per

  • Two questions on the HP Envy 700-230ea before you buy

    I am looking to buy a HP Envy 700-230ea of PC World.  The plug that I saw didn't quite answer two questions that I have to solve before committing myself. 1. the operating system is Windows 8.1 installed the 64 bit version (I need it to be) 2. the ma

  • BIOS information

    My computer is a desktop Pavilion D7-1587cb PC (product #: H2L77AA #ABA) Trying to do a complete system on a windows restore 8, using the set of recovery disks. When you try to change the boot sequence in the Bios boot menu, have thgree choice: Windo