Change the Error Message in Oracle Apex 5.0

Similar Questions

• Change the Error Message of the presentation in double Page

  Hello
  
  How can I change the error of double page layout in apex?
  I'm currently going to another page, but I want to change the error message.
  
  The vehicle has currently has to continue related
  Error ERR-3331 page had already been provided and cannot be resubmitted.
  link OK.
  
  I would like to say
  
  The page had already been supplied and cannot be resubmitted
  Conitue bound, who will return to the page.
  
  I want the link OK and the error code.
  
  I'm still new to APEX, so I don't know where to go to fix this.
  Can anyone help in this area? Is this even possible, is there another solution to this?
  
  I use the template buttons and most of my pages are model based also.
  
  Thank you
  Mary
  
  Published by: Lucky on January 14, 2010 07:38
  
  Published by: Lucky on January 15, 2010 08:44
  
  Published by: Lucky on January 19, 2010 07:36

  Mary:

  Model based buttons are indeed harder to gray-out/disable HTML buttons are. Demanding that the other buttons on the page are also subject to the same action more complicated the problem.
  It may be possible to have your custom error message to return only for error "dup submission."

  Change the model of error as follows

  Set the "Error Page template" in the "error page control model ' as '.
  #MESSAGE #.
  In the footer of the model section add {code}
  
  {code}

  CITY

  Published by: city has on January 19, 2010 10:52

• Change the error message by default printer 'Operation could be completed (error x 00000709).

  Original title: arthcua

  I'm changing my printer canon pixma canon pixma mp287 2700 tp fr..  I have already install the power driver of the company.  test print, scan succesfull.

  I'm now chanding pixma mp287 but unluckly that he will not change the default printer. When I right click on the printer pixma mp287 icon to install.  A State of error message "the operation could be completed (error 0 x 00000709).» Double check the name of the printer and make sure that the printer is connected to the network.  The name of the printer is correct and that the printer is connected to the printer.
  What is the solution.
  Thank you.
  ArthCua

  Hi ArthCua,

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. what version of Windows operating system is installed on the computer?

  2. is the computer connected to a network domain?

  You must enable WIA - Windows Image Acquisition. Now to do these following steps.

  a. click Start and type services.msc in the search box

  b. Locate the service:

  Remote procedure call (RPC)

  DCOM Server process Launcher

  RPC end point mapper

  Detection material core

   

  Make sure that the Startup type is Automatic.  Steps to set the auto services

  c. search for the service

  d. right-click on the service

  e. If the service is stopped and then Start the service

  f. Select Properties

  g and in the Startup type , select Automatic

  Enable these services. To click directly on it, click Properties, and make it automatic. Once you turn on all the start them. After all the services are started, scroll to 'Windows Image Acquisition' this automatic too and start it. Just restart your PC and you should be good to ride.

  Hope that this information will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• View the Error Message customized to Apex

  Hello
  
  I created a form master / detail on Emp and Dept tables. In the Dept table, I have deptsal column, which is updated by a trigger on the table EMP.
  After trigger DEPT table a:
  
  create or replace trigger "TRG_DEP_SAL".
  BEFORE the UPDATE on "DEPT".
  FOR EACH LINE
  BEGIN
  IF: NEW.deptsal > 100 THEN
  RAISE_APPLICATION_ERROR (-20001, 'Dept too high salary!');
  END IF;
  END;
  
  Then, when I get the salary on Apex shape, which increases the limit of deptsal for example 100, it gives the following error message:
  
  
  Internal error in the routine mru: ORA-20001: error in MRU: line = 1, ORA-20001: Dept too high salary! ORA-06512: at "ZAHIDKHANUK. TRG_DEP_SAL', line 4 ORA-04088: error during execution of trigger ' ZAHIDKHANUK. TRG_DEP_SAL' ORA-06512: at "ZAHIDKHANUK. BIUD_EMP', line 11 ORA-04088: error during execution of trigger ' ZAHIDKHANUK. BIUD_EMP', to update 'ZAHIDKHANUK '. "' EMP ' defined 'EMPNO' =: b1, 'DEPTNO' =: b2, 'ENAME' =: b3, «JOB» =: b4,"MGR"=: b5, 'HIREDATE' =: b6,"SAL"=: b7,"COMM"=: b8, 'ID' =: b9 where 'EMPNO' =: p_pk_col
  Error failed to process the update.
  Ok
  
  
  How can I view my message?
  
  Thank you
  Zahid

  Hello

  Yes, you can do it. You create a validation of the page that moves through the records in a tabular form, checks entered values, and then returns an error message.

  Create a new validation. Set it to a Page-level validation, select PL/SQL and then function that returns the error text, then give it a name. The PL/SQL will be something like:

  BEGIN
   FOR i IN 1..APEX_APPLICATION.G_F01.COUNT
   LOOP
    IF TO_NUMBER(APEX_APPLICATION.G_F04(i)) > 100 THEN
     RETURN 'Item ' || TO_CHAR(i) || ' - DEPTSAL must not be greater than 100';
    END IF;
   END LOOP;
   RETURN NULL;
  END;
  

  It will loop through the records in column 4 and check the amount. If it is greater than 100, an error message is generated displays the line containing the error. This will stop the process on the first error. If there is no error NULL is returned that indicates that the validation test was successful.

  You need to replace G_F04 with the correct column for your page - make a display on the loaded page Source and check the attribute "name" for the column. G_F04 is for "f04", G_F05 is for "f05" etc.

  Andy

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• How to change the welcome message

  Hello
  
  I'm changing the welcome message in my apex application that now gets the user name (ID). I want to create recover r the database user name and place it in the welcome message.
  
  So, how would I do it. I check the model and I found < span > $App_User. < / span > but the problem is that I can't change this value or I have another idea of how to change
  
  Thank you

  Point of change of the new Session to before header.
  The only problem is that it will run on each page, so be sure is condition do run only if the element of the app is not defined.
  Condition Type = Expression of PL/SQL
  Expression1 = username is null;
  Kind regards

• The AUDIT command in, oracle apex (version 4.2.5.00.08), error "ORA-00911: invalid character '.

  I am trying to run

  "AUDIT INSERT, UPDATE, DELETE on emp BY ACCESS WHENEVER SUCCESSFUL;"

  in "SQL commands" on oracle-apex (version 4.2.5.00.08).

  I get the error message ' ORA-00911: invalid character '.

  Can someone tell me the solution for this?

  Apex environment we need to set the database AUDIT_TRAIL to TRUE for the control

  "AUDIT INSERT, UPDATE, DELETE on emp BY ACCESS WHENEVER SUCCESSFUL;"  to work.

  By their Summit, to be able to change the setting of database AUDIT_TRAIL we have to log-in as a DBA from the link "SQL workshop--> utilities--> on the database.

• Change the error ADF messages that pop out

  Hello once more
  
  I created a Web page using the ADF technology that Jdev provides you with.
  
  One of the things that is most useful is the error messages that will automatically eject if for example you leave empty field that must be completed. Or you type a value that is out of range, etc. The only problem with this is that while I can read English, some users in my country may not.
  
  So my question is how can we change these error messages for my mother tongue? I can translate easy, but I don't know where to find the code that contains the text that they show.
  
  If anyone can help Id really appreciate it

  I'm guessing "Oracle JDeveloper Handbook" is the McGraw-Hill book published by Duncan Mills and Peter Koletzke Avrom Roy-Faderman:
  http://www.Amazon.com/Oracle-JDeveloper-11g-Handbook-development/DP/0071602380/ref=sr_1_4?ie=UTF8&s=books&QID=1279005819&SR=8-4

  The 11g version of this book replaces the earlier versions, 10g, etc. 9.

  As a general understanding JDev ADF & text it is recommended to read. As Michael says, I don't think it covers internalization, however.

  There is a more advanced guide "Oracle Fusion Developer Guide" by Frank Nimphius and Lynn Munsinger:
  http://www.Amazon.com/Oracle-Fusion-developer-guide-applications/DP/0071622543/ref=pd_sim_b_1

  This is a more advanced text not recommended for beginners, but recommended reading once you understand the basics.

  Back to the original question in this post, internalization is covered in article 21 of the Guide Web ADF:
  http://download.Oracle.com/docs/CD/E14571_01/Web.1111/b31973/af_global.htm#CHDGCAFI

  If you are looking to customize the error ADF BC it is covered in the section of the Guide Fusion ADF 37.8:
  http://download.Oracle.com/docs/CD/E14571_01/Web.1111/b31974/bcadvgen.htm#BABEFGCI

  I wrote a post on the latter sometimes back, which may or may not be relevant to the task at hand:
  http://one-size-doesn

  CM.

• When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it?

  "socket error".

  When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it? Is - this type of error called a winsock error?  It keeps happening to me on this site. What I've read, it happens when you make changes to a program before concluding that under its weight. Could it happen because I'm deleting files, I don't think that will be completed while the other files are D/Ling? That's what I'm doing wrong? I found a solution to correct an error in Winsock that is to enter the "command prompt" and type "netsh winsock. Will this work? (I'm sorry I have so many questions in this post, but I have had TO KNOW!!)

  Hello

  I suggest you send the question here for best support about the issue.

• Changing Z10 blackBerry device name gets the error message

  Hi, I'm not sure if this is the right place for newspaper bug?  I don't see any bug report feature on z10 device similar to the older versions of the operating system, I have to raise this issue here.

  I went in my device settings - 'About' to change the name of devcie for a description more usability.  The default when registering on Rogers was 'BLACKBERRY - 54 A 8' for my device.

  I tried to change 'Mike z10' and after an attempt to save, I get the following error "device name not valid - have chosen you an invalid name.  A devcie name must be alphanumeric and may contain '-'and'.', but not as the characters of the first or the last and '.' can only be used as part of a complete domain name. "

  I don't think I'm violates all the above statement, however, it doesn't let me save?  I think this could be a bug?

  Mike

  It worked.  Thank you!

  May be a suggestion to the State in the error message that the name must not include space because it does not currently.

• Windows Defender does not draw attention to the changes to the system, good event 'active' s, I don't get the error messages

  Windows Defender does not draw attention to the changes to the system, good event 'active' s, I don't get the error messages. How can I solve this problem?

  Defender alerted system changes in previous versions (Vista, etc.)

  It is no longer performs this function under Windows 7.

• How to change the error icon in the validation error message in inputText

  Hello

  I want to change the error icon in the error message when a validation Rodez inputText.

  I know we need a new skin. Should what changes I make?

  inside in your skin such as changing file

  af|message::error-icon{ 

     content:url(/adf/images/abc.png); 

  }

• After making some changes I sometimes get the error message "cannot build a review because of a program error? Any suggestion would be appreciated.

  After making some changes I sometimes get the error message "cannot build a review because of a program error? Any suggestion would be appreciated.

  Molloy10 wrote:

  After making some changes I sometimes get the error message "cannot build a review because of a program error? Any suggestion would be appreciated.

  What changes?

  What program?

• Receive the error message after that firewall creative cloud update changes to our network.

  Receive the error message after that firewall creative cloud update changes to our network.

  We have a user, who tries to update through the creative application of cloud.  We tried to find what is blocked but have met a dead end.

  When the cloud creative software attempts to shout that we see a connection attempt https://ops:443 / ims/token/v1

  I did some research and the only reference to the IMS for Adobe, I could find was the IMSService.  This seems to be an authentication service.  The problem is that "ops" are not a valid domain.

  This issue seems to only affect the Creative Software of clouds as I was able to update a test computer with Creative Cloud via Adobe Application Manager.

  The user's system and our test system are running OS X Yosemite

  Hello

  Can you please check is below the links with white combination ports on your firewall. Adobe creative cloud desktop application uses these ports only.

  Address	Ports
  ccmdls.Adobe.com		443
  IMS - na1.adobelogin.com	80	443
  IMS - prod06.adobelogin.com		443
  na1r.Services.Adobe.com	80	443
  prod-rel-ffc - ccm.oobesaas.adobe.com		443
  prod-rel - ffc.oobesaas.adobe.com		443
  LM.licenses.adobe.com	80	443
  ccmdl.Adobe.com	80
  swupmf.Adobe.com	80
  swupdl.Adobe.com	80
  ACP.adobeoobe.com		443
  interaction.Adobe.com		443

  Thank you

  Ashish

• The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

  OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

  I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

  After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

  Try to turn on a VM and Ihanta!, the above error.

  Nothing else was changed.

  I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

  Error again.

  I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

  Error again.

  1. status of /etc/init.d/VMware

  Networking networking on/dev/vmnet0 is running

  Invited only on/dev/vmnet1 network is running

  Network invited only on/dev/vmnet8 is running

  NAT networking on/dev/vmnet8 is running

  Responsible vmmon module

  Loaded module Vmnet

  FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

  What now?

  I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

  I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

  Cannot change the power state of virtual machine: the process has exited with an error:

  vmxvmdb: name of the Index generated by the configuration file

  POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

  You have a bad version of the module kernel "vmmon.

  Try reinstalling VMware Server.

  POST (no connection): failed to initialize the surveillance apparatus.

  Failed to initialize the virtual machine.

  End of the error message.

  I found several posts other people have this problem but

  they are months with no recent activity and nothing that solved the problem.  I found appeared

  to get a fix, one updated the all an update that corrects the problem for

  2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

  http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

  Of course, I would like to know how to solve this problem as well.

  Thank you