Change the GLOBAL_NAME 11 g RAC

Similar Questions

• How can I change the starting point of a path?

  It bothers me when I use brushes for a path shape/access line. Is there a function to change the starting point of race in the direction of the form/reverse of a path?

  You won't need to duplicate the path. Just select it and then change the options for this object. There is a button in the Panel forms for this.

• Adobe Illustrator CS6 don't allow me to change the weight of the race

  The one having the same problem? : I'm trying to reduce the stroke of 1 pt .5pt in Adobe Illustrator, and he does not accept the command. I can increase the race from 1 pt to 2pts however. This isn't a problem in CS5.

  DD,

  In such cases, the first assumption is aligned to the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

• Low & left slide during 0.5 px after change the size of race

  I try this in Illuatrator CC and Illustrator CS6 on Mac OS X Yosemite

  Steps to follow:

  1. Pen tool, make a square (x = 260.5)

  

  2. change the size of race

  

  3 X 260 px =!

  

  4. change the size of race to 1 px

  

  5 X 259,5 px =!

  

  6. where is the my problem? Preferences?

  

  Solve this problem

  Take off

  Align new objects to the pixel grid

  

• Cannot change the size of race under 1pt

  For the last two weeks with the new document I create, I can't do the size of race less 1pt. If I put in 0.5pt and press ENTER, the size of default race to 1 pt. This is true in the quick navigation bar both the appearance section. In older documents, I can change the size of race less 1pt. I downloaded the latest updates, which did not fix this problem. Is there something in the settings that control this?

  You are probably using the web profile for new documents, which must align with the grid of pixels by default. Yout want only power off, otherwise your fat Wight Stork should be a pixel tis number 1 or a multiple of.

  If you do not work on web documents, modify your new document profile.

  

  You can disable the feature here for the selected items.

  

• How to stop to change the weight of the race when changing the size of an object in CS5 on Windows 7?

  I'm not sure what I did to make this happen or how to change it back in, but for some reason when I change the size of a subject line / it changes the weight of the race as well. (For example, if I drew an ellipse with race weight pt 2 and then increase the size of the weight of the race would be pt 2,856 or some such number instead of 2 pt.) Does anyone know how to change this back?

  Thank you!

  go to Edition-> Preferences-> general and uncheck the box 'features and scale effects.

• How to change the SGA and PGA in 10g r2 RAC

  Hello
  
  How to change the SGA and PGA in 10g r2 RAC, its Linux.

  Hello

  Here's the way I followed to change the SGA and PGA in CARS.
  --------------------------------------------------------------------------------
  Action plan to change the parameter memory in the environment(5/21/2010) of production

  Note:
  =====
  Practice must be done in the DEV/TST environment before going to Production.
  Although the procedure can be applied in the testing environment the evolution of values
  used in the test environment should be amended since number of RAM are not the
  even between the production and test servers.

  1 changes to these two parameters in one of
  the prod instance, e.g. PROD1
  ====================================================
  Connect as sysdba on sqlplus
  --------------------------

  Change:

  ALTER system set sga_target = 28G scope = spfile sid ='* ';

  Change:

  ALTER system set pga_aggregate_target = 4G scope = spfile sid ='* ';

  SQL > alter system set pga_aggregate_target = 4G scope = both;
  SQL > show parameter pga_aggregate_target;
  -should see the number altered on both instances

  Change:

  SQL > alter system set sga_max_size = 28G scope = spfile sid ='* ';

  SQL > alter system set sga_max_size = 28G scope = spfile;

  SQL > alter system set sga_target = 28G scope = spfile;

  3 stop PROD database (two instances must stop)

  $> srvctl stop database d PROD
  $>. / $ ORA_CRS_HOME/bin/crs_stat - to check the status of the database

  4. establish the PROD database (two Forum should be high)

  $> srvctl START database-d PROD
  $>. / $ ORA_CRS_HOME/bin/crs_stat - to check the status of the database

  connection in both cases as sysdba to check
  --------------------------------------------

  SQL > show parameter pga_aggregate_target
            
  SQL > show parameter sga_max_size
  -should see the number of change always there in both cases
  -According to step 1

  -After confirmation above two parameters are changed on both instances.
  -then make the syntax below in a case

  (5) check that everything is ok

• Need to change the mode of archievelog of database 11 g r2 RAC

  Hello
  
  Our Oracle RAC 11 g r2 database is configured in journal noarchieve mode. That's why we have failed to take the nonstop RMAN backup in the database. Please help me by providing plan details of action to change the archivelog for this CAR enviornemt mode.
  
  Waiting for your valuable response.
  
  Aungshu

  I donno if it is different from the database unique place instance. But the steps are:

  SQL > shutdown immediate
  SQL > startup mount
  SQL > alter archivelog database;
  SQL > alter database open;

  But before that, you need to configure the flash recovery area and assign it to the appropriate size.

  If you also want to enable return of flame and then with 11g, you can do it online.
  SQL > alter flashback database;

• Change the host name on STANDY RAC cluster nodes

  Hello
  
  I would like to know the steps required to modify and hostname in Oracle RAC configuration, if I update the host names of the 2 nodes in the CARS
  
  IM under Redhat EL 5, Oraclle 11g
  
  Thanks in advance

  I don't think you can change the hostname with CRS without re-installation of CRS.

• How to change the size of race by default in CS5?

  I've read several things on this forum but nothing practical. In the past I have if I wasn't not possible to change the thickness of line with no document open and who has worked for all new documents to come. Well, this isn't.

  The size of default race is 1 point and I want it to change Te 0, 25pt. But how?

  Open the new Document profile that you use most often. Draw a line with the appearance that you want and use the Option (Alt) - drag to replace graphic Style by default (in the upper left in the graphic Styles Panel). Save the file.

• Change the date of the BONE in a RAC (9i, 10g, 11g)

  Hallo,
  
  Oracle RAC installation guides warn to keep each synchronized RAC nodes, but I wonder if
  
  It is possible to change the date of the BONE (which is developing a new date or time) how CARS "rolling" (a single node one node
  
  without intervention in time) having side effects.
  
  Thank you

  If you manually ('hard') the clock game, I recommend the closing of the database and the clusterware. The essential point here is deepening hard...
  Oracle recommends using ntp with "-x" aguments which will speed up or slow down the clock system but never sets hard clock.

  There is a bug in metalink: "Bug 5015469 - OPROCD restarts node when the date system goes back. So for example if you change your
  time of the past that could restart the node.

• How to change the Oracle initialization parameters in db Oracle RAC

  I want to change the settings AUDIT_SYS_OPERATIONS and SQL92_SECURITY to TRUE. I have an Oracle RAC database two nodes.
  
  Should I stop the clustering services, modify the settings on both nodes and restart? Or change the setting on a node (node 1), restart node 1, restart node 1 (no change)?
  
  ALTER SYSTEM SET AUDIT_SYS_OPERATIONS = TRUE scope = SPFILE;
  
  Thank you.

  The command

  ALTER SYSTEM SET AUDIT_SYS_OPERATIONS = TRUE scope=SPFILE SID='*' ;
  

  is the syntax. However, the CCR using a SPFILE the ' SID ='* ' "specification is the default value." IF you want to change a setting for the local (for example PROD1) instance to which you are connected to, specify SID = "PROD1";
  The documentation states that if you specify a remote instance (for example PROD2) Oracle changes the value in the memory on the remote instance.

• Change the ip address in the database of oracle10g rac

  Hello
  
  I would be grateful if someone could advice me on the issue I'm vascular face on my rac oracle10g on windows setup.
  After the ip address for the cluster 2 node rac (Windows Server) have been changed by the system administrator, i.e.
  "172.31.x.x' to '172.30.x.x '.
  I have chage of interconnection private "172.31.x.x' to '172.30.x.x' using oifcfg.
  My question is where and how can I do the new changes to be effective in instances of data that I have not been able to get any useful document on metalink about how to do this.
  
  Thank you...

  Obviously, if you change any configuration-dependent resources must be restarted before the changes enter into force.

• Changing the duty cycle of PWM on during the race

  Hello

  I am trying to generate a my C Code PWM signal.

  It works fine except for the fact that I can not change the operating factor during execution of the generation of PWM signals.

  Here's what I do:

  //Init DAQmxCreateTask("masterP",&task_pwmout);
  DAQmxCreateCOPulseChanFreq(task_pwmout,taskchans1,NULL,DAQmx_Val_Hz , DAQmx_Val_Low , 0.0,freq,duty);
  DAQmxCfgImplicitTiming(task_pwmout,DAQmx_Val_ContSamps,1000);
  DAQmxStartTask(task_pwmout);
  
  ...//Stop DAQmxStopTask(task_pwmout);
  

  It works well, but the duty cycle is fixed.

  I tried to change the cyclical report but it seems that the only way it works is like this:

  //Init DAQmxCreateTask("masterP",&task_pwmout);
  DAQmxCreateCOPulseChanFreq(task_pwmout,taskchans1,NULL,DAQmx_Val_Hz , DAQmx_Val_Low , 0.0,freq,duty);
  DAQmxCfgImplicitTiming(task_pwmout,DAQmx_Val_ContSamps,1000);
  DAQmxStartTask(task_pwmout);
  ...
  //Change Duty Cycle DAQmxStopTask(task_pwmout);
  DAQmxSetCOPulseDutyCyc(task_pwmout,taskchans1,duty);
  DAQmxStartTask(task_pwmout);
  ...
  //Stop DAQmxStopTask(task_pwmout);
  

  I have to stop the task, set the new cycle and restart the task.

  Unfortunately, it takes some time (~ 100 ms) which means that during this time, the PWM is turned off.

  Is there a way to change the smoother operating factor, so there is no gap between?

  Thanks in advance.

  Christian

  Hi Christian,

  You are right. Stop a restart of the task is a very slow way to adjust the pulse width. This page describes the option adjust the factor of market during execution by using the function "DAQmxWriteCtrFreqScalar". By calling this function in a loop, after the start of your task, you will be able to adjust the frequency and factor use of your task, simply by changing the settings.

  I would like to know if it works for you.

  Concerning

• change the subnet Rac

  Hi gurus,

  Im working on CARS (11.2.0.3) 2 nodes, under RHEL 5.3

  I had to update some scan/vip /... and I used documents 276434.1 and 283684.1 for this purpose. Everything worked fine, but when I rebooted both servers I can't start scan, I check the logs and found this:

  CRS-2674: beginning of "ora.scan2.vip", the "RAC2' failed

  CRS-5017: the action "ora.scan2.vip start" resource has met the following error:

  CRS-5009: virtual 192.168.XXX.XXX IP address does not belong to the subnet 192.168.XXX.XXX

  . For details, refer to "(:CLSN00107:))" "in ' / u01/app/grid/log/rac1/agent/crsd/orarootagent_root/orarootagent_root.log '.

  CRS-2674: beginning of "ora.scan2.vip", the "RAC1' failed

  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN2. LSNR' on which would meet its investment policy

  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN3. LSNR

  CRS-5017: the action "ora.scan3.vip start" resource has met the following error:

  CRS-5009: virtual 192.168.XXX.XXX IP address does not belong to the subnet 192.168.XXX.XXX

  . For details, refer to "(:CLSN00107:))" "in ' / u01/app/grid/log/rac2/agent/crsd/orarootagent_root/orarootagent_root.log '.

  CRS-2674: beginning of "ora.scan3.vip", the "RAC2' failed

  CRS-5017: the action "ora.scan3.vip start" resource has met the following error:

  CRS-5009: virtual 192.168.XXX.XXX IP address does not belong to the subnet 192.168.XXX.XXX

  . For details, refer to "(:CLSN00107:))" "in ' / u01/app/grid/log/rac1/agent/crsd/orarootagent_root/orarootagent_root.log '.

  Check if the scan configuration and has obtained subnet, netmask and interface was wrong so I did:

  # $GRID_HOME/bin/crsctl modify resource ora.net1.network -attr "USR_ORA_SUBNET=192.168.xxx.xxx"

  # $GRID_HOME/bin/crsctl modify resource ora.net1.network -attr "USR_ORA_NETMASK=255.255.xxx.xxx"

  But always had bad interface

  SCAN name: scanVV, network: 1/192.168.XXX.XXX/255.255.xxx.xxx/eth3 <-should have eth0 rather eth3)

  SCAN VIP name: scan1, IP: /scanv3/192.168.XXX.XXX

  SCAN VIP name: scan2, IP: /scanv3/192.168.XXX.XXX

  SCAN VIP name: scan3, IP: /scanv3/192.168.XXX.XXX

  I been looking for but do not know how to change the name of the interface... any help will be appreciated. Thanks in advance

  How do I change?

  I found the answer

  When I checked the values of network, I saw:

  network config srvctl [oracle@rac2 bin] $

  Network exists: 1/192.168.X.X/255.255.XXX. X / eth3, static type

  Network: 3/192.168.XXX.XXX/255.255.XXX.XXX/eth0, static type

  network 1 should be with the values of the 3 network and vice versa. Default SCAN takes the values of the network 1.

  I tried to edit with 'srvctl edit k - 1 s 92.168.XXX.XXX/255.255.XXX.XXX/eth0 network' and 'srvctl change network k - 3 s 192.168.X.X/255.255.XXX. "X / eth3", at this stage, I checked the values of vip/scan /... and has not performed well... everything was down, now I know that I must restart the cluster to get the new configuration after change.

  As I does not restart, I was panic and I tried my second option, network configuration delete and recreate with the good:

  remove all the network + vip:

  [root@rac1]./srvctl remove vip 192.168.X.XXX, 192.168.XXX.XXX, 192.168.XXX.XXX, 192.168.X.XXX f y - v-i

  create network + vip with correct network number:

  [root@rac1]./srvctl add vip - n RAC1 k 1 - a 192.168.XXX.XXX/255.255.XXX.XXX/eth0

  [root@rac1]./srvctl add vip - n RAC2 k 1 - a 192.168.XXX.XXX/255.255.XXX.XXX/eth0

  [root@rac1]./srvctl add vip - n RAC1 k - 3-A 192.168.X.XXX/255.255.XXX. X / eth3

  [root@rac1]./srvctl add vip - n RAC2 k - 3-A 192.168.X.XXX/255.255.XXX. X / eth3

  Now everything works well again. Hope my question will help someone someday