change the subnet Rac

Similar Questions

• Change the subnet on the network profile

  Hello

  Like a fool I created 3 network profiles and paths using 16 subnets when they should have been 24. I wonder now to open firewall rules to route to other VLANs in 24 of the subnets. As its 16 and the two first parts are identical i.e. 10.2.X.X they don't route through the firewall

  The current VMS I can just go to manually change the subnet assigned to the NIC and they work.

  When I look at a network profile to change the subnet - it is greyed out

  Is there a way I can change this manually? so that the new virtual machines created with / 24 subnet and exisiting VMs I can manually change

  Or is the only way to delete the network profile and start over. How this affect the VMs running other than bulk can try and assign an IP address already in use?

  Thank you!

  You can try to update the database

  Find the name of the profile

  SELECT * from StaticIPv4NetworkProfile

  the name of the profile update

  Update dbo. StaticIPv4NetworkProfile

  Set SubnetMaskIPv4 = "255.255.255.0" where StaticIPv4NetworkProfileName = 'YOUR NETWORK PROFILE'

  Open the database in SSMS (SQL Server Management Studio) and run the SQL query when it is connected to your database of vRA. He has not supported but will most likely solve your problem.

  Or if you are not happy to do this directly through the database, you might try using the vRO vRA plugin and call the vCACEntityManager and update the StaticIPv4NetworkProfiles entity. My guess is the update of the database direct would be easier, but please take a backup and only update the field and nothing else.

• Script to change the subnet and vlan.

  Hello

  Please can anyone help with a script to change the subnet and VLANs on all the esx host in a cluster for the vmotion and management network interface?

  Thank you

  Astra

  I guess it worked because you pasted an out front, so:

  Get-Cluster mycluster. Get-VMHost | Get-VMHostNetworkAdapter | where {$_.} PortGroupName - eq "VMotion"} | {} %
  Game-VMHostNetworkAdapter - VirtualNic $_ - IP $_. IP - subnet mask "255.255.254.0" - confirm: $false
  }

  I guess that makes still out:

  Get-Cluster mycluster. Get-VMHost | Get-VMHostNetworkAdapter | where {$_.} PortGroupName - eq "VMotion"}

  2 vmknis right?

  If Yes, then it should work I think.

• Cannot change the subnet mask of eCard in 7.1.3 (opensuse 11.4)

  Had this problem before with 7.0 on suse 11.2, but I forget how I "fixed it". This is quite irritating considering I found nothing on google about this topic. I hope it's just my ignorance with the software and not a real problem, but when I try to change a vmnet as Host-only adapter, I have no option to change the subnet mask. I've seen tutorials where you just have this option, but I did not.

  I use a very simple script to make changes to the Infrastructure virtual VMware which are not available on Linux hosts via the virtual network editor in Linux in VMware Workstation version.  Note that there may be other ways, but this is what worked for me.  Also note that changes to the value of a parameter that is not a correct value will cause failures, and that's why I have the scrip, run the commands with the talkative and check the ifconfig and VMware Network Status before and after you made the changes and you will see that in the attached script.

  If you do not have what it takes to use the attached script then in a Terminal root or with sudo:

  sudo /usr/bin/vmware-networks --stop -v
  sudo cp -p /etc/vmware/networking /etc/vmware/networking.backup
  sudo cp -p /etc/vmware/vmnet1/dhcpd/dhcpd.conf /etc/vmware/vmnet1/dhcpd/dhcpd.conf.backup
  sudo cp -p /etc/vmware/vmnet8/dhcpd/dhcpd.conf /etc/vmware/vmnet8/dhcpd/dhcpd.conf.backup
  sudo nano /etc/vmware/networking
  sudo nano /etc/vmware/vmnet1/dhcpd/dhcpd.conf
  sudo nano /etc/vmware/vmnet8/dhcpd/dhcpd.conf
  sudo /usr/bin/vmware-networks --start -v
  sudo /usr/bin/vmware-netcfg
  sudo /usr/bin/vmware-networks --start -v
  

  In the attached script, you will see the following note about the use of writing, or why this is done manually:

      # NOTE: Load the VMware Virtual Network Editor and then click the OK button.
      #    This is being done for two reasons, one is to validate the settings
      #    and the other is to create a new DHCP_CFG_HASH in the networking file.
      #
      #    Be sure to review the 'Current Status after editing...' for any errors.
  
  echo
  echo  Starting VMware Virtual Network Editor...
  echo
  sudo /usr/bin/vmware-netcfg
  

  As I said there may be other ways and VMware is unfortunately very tight secretive about what they do the document to be disclosed to the public, which is unfortunately very little.  It is so absurd that the version of Windows is not this limitation but I guess I would really be surprised since removed altogether VMware VMware Player for Linux virtual network editor and does not install it for the VMware Player for Windows even if it's in the Windows Installer Package. Go figure!

• Change the subnet for VMkernel and Vmotion

  Our current configuration has Vmotion on the same subnet as our production machines, which I am not happy, encourage, that is causing our 3com troubled when past we vmotion virtual machine.

  We have dedicated a subnet of vmotion and want to change the port on the new subnet vmkernel.

  Our current vmkernel port has physical NIC 2, 1 in standby mode.

  My plan is to create another port vmkernel on the same switch and the standby card. I enable vmotion on that one, then disable vmotion on the original.

  Then, I would delete the original vmkernel port.

  This plan won't work and if so, what type of network on the age I will consider.

  Finally, is there a better way that I can do?

  Evening,

  It's actually how we run our Console Service with VMotion. We have the Service Console and VMotion on a vSwitch. The Port Console of Service Group is configured with 1 adapter active network and 1 in standby mode. The Group of ports VMotion is configured in reverse. It separates traffic while giving you still a level of redundancy in case a cable/adapter network breaks down.

  As you add VMotion for a vSwitch existing (vswif0), then will be without interruption, unless as it displays other says you have IP storage.

  Kind regards

  Glen

• Change IP Range Expansion but only the subnet mask

  Hello

  Subnet mask change

  My question is similar to the above thread, but I don't have to change the IP addresses or gateways only the subnet mask static VM hosts ESXi and vCenter servers.

  I'm leaving 255.255.255.0 255.255.252.0.

  My 5.1 ESXi hosts that necessary after changing the subnet mask?

  Have I missed something that someone may have lived or something that I can't do?

  1. Stop all VMS that get their by the assigned DHCP IP address.
  2. Change the subnet on all no VMware Shared Server VM management mask (for example: Business Suite servers as mail, accounting and other servers) and stop them.
  3. Change the Standard switch environment (move to vDS is another project) networks, including the subnet mask 'network management '. (otherwise I should change through DCUI?)
  4. Change the subnet vCenter camera mast and restart.
  5. Static power-up DHCP and VMs

  Thank you

  The f

  Hi Jeff,

  a restart should not be necessary. Just change the subnet using c# client, the Web Client or the DCUI mask. It is possible to use a PowerCLI script to make the change. It goes the same for the VCSA. I don't think that a reboot is necessary.

• Change of subnet PowerConnect 3448

  I just run the wizard from initial configuration to a PowerConnect 3448 and entered the wrong subnet. Can I change the subnet without erasing all parameters and rerun the wizard?

  Thank you

  
  

• Change the VLAN ID on a group of ports on a vSS

  We are changing the subnet that our vCenter VM resides on that will translate into change us vCenters IP address, subnet mask and gateway.

  He also goes to say that we must change the VLAN ID on the port group.

  My question is, can we change the Port Group VLAN ID first or first change vCenters details?. (So it is in VST Mode physical ports on the switch are trunk ports with say VLAN 100 and 200 with the new 300 of VLAN to add)

  Very welcome any suggetions. :-)

  Use the vSphere client to connect to the host that is running the VM vCenter.

  In this session of vSphere client, you can

  (a) change the VLAN switch vSS

  (b) open a console for the VM vCenter and change the IP settings it

  The vCenter VM will lose its network connection, but your session will continue to run, because you are connectly directly to a host (and no to vCenter).

  If the vCenter server is connected to an Active Directory server, then make sure to use a local administrative account or a domain administrator with cached credentials to connect.

  Furthermore, after you change the IP address of vCenter you will probably run the issue described here: http://kb.vmware.com/kb/1001493, but the article contains a resolution for this.

• Change the ESXi host IP address

  Hello

  I have the following Setup for vSphere 4.1 and you must change the subnet:

  1 - host 1.0.0.1

  Host 2: 1.0.0.2

  Home 3 - 1.0.0.3

  vCenter - 1.0.0.99

  I need to move all my guests and my vCenter to a new subnet:

  1 - host 1.0.0.1

  Host 2: 1.0.0.2

  Home 3 - 1.0.0.3

  vCenter - 1.0.0.99

  I want to try a host first of so I moved all my virtual machines from the host 3.

  I can go on the pages of Configuration/network host and select Properties on the virtual switch containing VMkernel port of my network management - from there it seems that I can just change the network IP management settings. However, it is the right way to do it? I thought that the best thing to do is the following:

  1 disconnect the host vCenter

  2. connecting to the host directly using vSphere client

  3. change the IP address of the host management network

  4 reconnect to the host (using the new IP address of the host) using vCenter

  Should I switch to maintenance mode?

  The same operation can be performed on a host running VMs?

  Thank you

  Change the management IP has no impact on the virtual machines running on this host. To make a change of this nature, I often disable HA (either completely, or uncheck "Enable Host Monitoring" on the segment of HA configuration). This will ensure that the interruption in the availability of management so that the changes of property intellectual fires any sort of isolation HA event.

  HA, you should be able to make the change from the vSphere client attached to the host or vCenter. Just make sure that you have access to the consoles so you fubar the vSwitch and needed fix through tech support mode or the DCUI.

  You are afraid to have virtual machines on the host, if not in maintenance mode to evacuate VMs. It is not necessary.

  vCenter relies heavily on DNS, make sure that the new IP address reflects the input host DNS.

• Change the default line weight

  Is it possible to change the default race weight arising in the Contour palette?

  At the moment I get 0.25 pt, pt 0.5, 0.75 pt 1 pt, pt 2, pt 3, etc.

  I'm working on a project that requires lots of 0.3 to 1.5 pt strokes (with different fillings).

  It's exhausting to have to enter the values of all time, and the pipette is not always useful unless I do a "palette" with all possible moves and fillings.

  Nope.

  (Freehand has long provided a preference that allows you to define the list of increases that appear in the menu of weight STROKE.)

  Workaround is to change the graphic Style by default or create additional Graphic Styles in the start-up documents and templates that you use.

  JET

• Change the IP and subnet

  Hi, I wanted advice on the change of the ip address and the subnet.

  I have a band with 3 equallogics, currently the Group ip and individual ip addresses are in the same subnet as the main network (well separated on different switches). The management ports are not enabled. (Don't ask, it's just like that!)

  What I want to do is change all the iscsi ports to another subnet, select the management on the original subnet ports.

  How better to do this without downtime (if possible)?

  Do the following

  1. replace the new subnet 1 NIC on each server

  2. change eth1 on each equallogic new subnet

  3. change the Group on the new subnet IP

  4 connect target iscsi initiator on the servers to the new IP address

  5 change the rest of the NIC on the servers and equallogic to new subnet

  6. turn on management NIC on old subnet

  Hello

  Also are the servers on the switches 'SCSI '?

  I do not have this being done without a failure.  You will need to disconnect all connections to the server, enter the new address connection and re of the discovery.  If you have both at the same time, you will eventually "double Assembly" volumes.  That would likely result in corruption when you you disconnected the old connections.

  Otherwise, your plan is mostly correct.

  1.) disconnect all servers

  2.) change a port on each Member of the new subnet.

  (3.) the IP address of the group change

  4.) changes the IP address remains addressed both.  Make an interface on one, then another.

  (5.) assuming that you will isolate the switches, remove the connection inter between them.

  6.) connect the Mgmt ports to the LAN switch and activate Mgmt dedicated to all members

  7.) Ping test all interfaces on the servers.

  8.) remove old discovery address and preferred for windows targets. (The static mappings for VMware)

  9.) add new discovery journal volumes and return address in.

  10.) repeat on the remaining servers

  Kind regards

  Don

• Adobe Illustrator CS6 don't allow me to change the weight of the race

  The one having the same problem? : I'm trying to reduce the stroke of 1 pt .5pt in Adobe Illustrator, and he does not accept the command. I can increase the race from 1 pt to 2pts however. This isn't a problem in CS5.

  DD,

  In such cases, the first assumption is aligned to the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

• Low & left slide during 0.5 px after change the size of race

  I try this in Illuatrator CC and Illustrator CS6 on Mac OS X Yosemite

  Steps to follow:

  1. Pen tool, make a square (x = 260.5)

  

  2. change the size of race

  

  3 X 260 px =!

  

  4. change the size of race to 1 px

  

  5 X 259,5 px =!

  

  6. where is the my problem? Preferences?

  

  Solve this problem

  Take off

  Align new objects to the pixel grid

  

• Cannot change the size of race under 1pt

  For the last two weeks with the new document I create, I can't do the size of race less 1pt. If I put in 0.5pt and press ENTER, the size of default race to 1 pt. This is true in the quick navigation bar both the appearance section. In older documents, I can change the size of race less 1pt. I downloaded the latest updates, which did not fix this problem. Is there something in the settings that control this?

  You are probably using the web profile for new documents, which must align with the grid of pixels by default. Yout want only power off, otherwise your fat Wight Stork should be a pixel tis number 1 or a multiple of.

  If you do not work on web documents, modify your new document profile.

  

  You can disable the feature here for the selected items.

  

• How to stop to change the weight of the race when changing the size of an object in CS5 on Windows 7?

  I'm not sure what I did to make this happen or how to change it back in, but for some reason when I change the size of a subject line / it changes the weight of the race as well. (For example, if I drew an ellipse with race weight pt 2 and then increase the size of the weight of the race would be pt 2,856 or some such number instead of 2 pt.) Does anyone know how to change this back?

  Thank you!

  go to Edition-> Preferences-> general and uncheck the box 'features and scale effects.