Change the link on the control panel CS5
Hi all
I would like to see the link blue turn in my control instead of the x, y, w & h boxes tradisional Panel. Is their a way to control this? I don't see any other commands such as, stroke, Opacity, but not turn. I can click on anyone, there , x, w & h and which evokes the good part of transform, but I would also like to use the alternative method (transform)
I hope someone can clear this up for me,
Thank you
When the scope of the application is smaller, the Transform link will show. So the only solution would be to drag and make it smaller...
Tags: Illustrator
Similar Questions
-
How to change the language of the control panel
Hello
Hp scanjet 8270 control panel display shows different language not English not necessary Solution how to change the control panel display language to English.
Hello sajithgosh
The product that you have is a commercial scanner. I suggest you post in the HP Business Support forum for a better chance to find a solution.
You will find the Board Commercial Scanjet here.
http://h30499.www3.HP.com/T5/scanners/BD-p/BSC-418 -
I created a labview project that contains about 40 vi. Each vi has a joint control panel which is a group of ip address, or address of the port and the parameters that are passed high-level vi at low level vi for the purpose of control and access our daq cards. As this control panel exists in all the vi and must not be the same there is a problem when the need to make a change or update the controls during development. The problem is how long it takes to go and change the control panel of each single vi. I wish I had a way of reproducing a change in the Panel of control through all six simultaneously.
All controls in the control panel are in a bundle, so all values are passed to 1 thread.
I tried to turn the Panel in a sub vi and this way I can just "create control" and have output parameters maniuplate vi, but if I update the vi, I still have to go back and create a new control for each vi under the control has changed.
I tried using secondary and the creation of the control panel in a sub vi which is displayed in the secondary, but gives the undesirable consequence of not being able to view or change the settings of the control panel if the program does not work, as pristine as when sub-panels program does not work.
Is there a another way to display the front panel of a Subvi next using a panel of void? Is there a better way to propagate changes in a bundle in a series of vi?
Yes a def type might help you and I would take the next step to make a strict type def if you want the look to be the same on all its bodies. You can also view this nugget on Type definitions for more idea about it.
Have fun
Ben
-
Low sound volume
My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume. It's real power radio on the internet and play music from a CD inserted into my machine. The sound icon does not appear in the toolbar. I tried the fixit of automatic Wndows and it ran and said low volume has been set. Not the case.Hello
1. what operating system do you use?
2 did you change on your computer?
Method 1:
I suggest you follow the link and check.
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02
Method 2:
I suggest to follow the link and search for the volume in the taskbar.
(a) right click on an empty area of the taskbar and then click Properties.
(b) in the Notification area, click Customize.
(c) select the volume see the icons and taskbar notifications check box, and then click OK.
I also suggest you to follow the link and check.
Change icons appear in the notification area
http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area
-
Possibility to change the brightness of the screen is no longer available in the control panel
original title: I cannot adjust the brightness of the screen more! Why this option disappeared suddenly from the control panel? It was fine last week.
Every night, I turned off my screen. Suddenly last week, this option disappeared.
Hello
You did material recent or changes to software on your computer before this problem?
Step 1: If the computer does not display the option to adjust the display brightness, check with the manufacturer of the computer for a BIOS updated to support this option.
You can also try to update the drivers for hardware from the computer and check.
BIOS WARNING
Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.Reference:
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-linksStep 2: You can also try the system restore feature and restore so far when you were able to see the brightness of the display option in Control Panel.
Reference: http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore
I hope this helps.
-
I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work. Cannot change network settings. This is the messege I get: the system cannot find the environment that was entered
Hi kotipelto.
To better understand the issue, we need the following information:
Are what environment you referring? What did you delete?
Let us know if you can start the computer in safe mode and works as expected.
Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Boot advanced options, select the menu safe mode.
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
If you can start the computer in safe mode, perform the system restore.
System Restore: System Restore to put the computer's system files to an earlier point in time.
Search the steps mentioned in the link below:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-sytem-restoreThank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
We have tried everything we can think of changing the time in our computer. Whenever we click on the small box in the lower right corner, he says - "Windows cannot access the specified device, path or file. May not permissions to access you the item. In addition, we are unable to add or remove programs or making changes through the control panel. Help
All the problems you describe are problems that could occur if the user that you are connected without administrator privileges. The quick check of administrator privileges must right click on the button 'start '. If "Open All Users" is one of the choices that appear, then you have administrator privilege. Otherwise, you must connect to your machine like the built-in 'administrator' or a user in the group "Administrators".
Assuming that you have administrator privileges, things get more complicated. User rights can be granted or denied to any user - even administrators - by group policy. If you are an administrator and you have XP Pro, then you might be able to check or change the user rights by using the Group Policy Editor (from-> Run-> "gpedit.msc"). Search in the:
Computer configuration-> Windows settings-> security settings-> local policies-> user rights
path. One of these user rights is "Change the System Time". If your XP Pro machine was never part of a domain, I would consider also running a program anti-malware on your system.
If you have XP Home Edition, you don't have the Group Policy Editor. You will need to check / adjust / modify your user rights by using the command line program "NTRights" provided with the Resource Kit. Problems like that with XP Home would raise my suspicions that you have a malware infestation.
'How to set user rights to logon using the NTRights utility'
<>http://support.Microsoft.com/kb/315276 >
HTH,
JW -
XP, 32, quad, walk, I've just been diverted while trying to get rid of unwanted guests, I came back to the control panel & it management logo had changed it was changed to a page, if that's how describe you you can see I need to learn a little more about computers right! anyway & when you right click it there came a page white, but before, I was trying to get rid of those comments, there were about 5 I know where they come from bittorrent, I had to install more than one week & then I am devoured alive I had to get my tech to reformat, but these things were hidden somewhere? because I found traces of bittorrent on the computer, I give up! Please can someone! help this old man! gazza.
Hi gazza.
Scan your computer for malware and try to remove it.
You can use the Microsoft Safety Scanner to do the same.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Unfortunately, when a system is infected the best way to ensure that everything has been deleted is to perform a clean installation.
-
I installed Microsoft Security Essentials today and I'm trying to edit startup programs. Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open. However, most of the security will not allow Windows Defender be turned on and I want to change the startup parameters. How can I accomplish this?
Hello
If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.
There is nothing to worry.
Using both programs at the same time can cause system conflicts, etc.
If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
And now edit startup in Vista without using Defender programs, use one of the following methods:
"How to use MSCONFIG in Windows Vista"
http://netsquirrel.com/Msconfig/msconfig_vista.html
Or the program Autoruns for FREE:
"V11.21 Autoruns for Windows"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
See you soon.
-
Original title: can you help me?
My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista
My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista
You in fact 2 questions.
I will answer the one who is the most important, for you it is.RE: Change startup programs
You can access this way startup programs...
Start button > in the search box, type msconfig > Enter > click on Startup tab. Here's your startup programs.
To disable, uncheck the box in frontTo activate... check the box opposite.
RE: Windows Defender cannot be found.
If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
Bottom line: it's ok. It's normal.
List of AVs which will stop Windows Defender:
Norton
McAfee
AVG
Microsoft Security EssentialsIf you don't have AV programs above, here's how to restart Windows Defender:
Start button > in the search box, typeServices > press the Enter key > scroll to find Windows Defender, click on it >...
topic status , it must be said... Has begun
under Startup Type, it must be said... Automatic
If it does not say that, right click on Windows Defender > click Properties >
in Startup Type, click on the pointer to the right and select automatic
to the service status, click Start
Click OK when finished. -
change the language of the Control Panel on laserjet pro m1530 mfp
How to change language of the Control Panel on laserjet pro m1530 mfp. I screwed up the installation.
Hi timloso,
Select the language
- On the Control Panel, press the Setup button ( ).
-
Cannot open "Change startup programs" in the control panel
Cannot open 'Change startup programs' in Control Panel. When I try to run "Start change programs", I get an error message that says: "cannot find 'C:\Program'. Make sure you typed the right name and try again. "Is there anyway that I can replace this file without having to reinstall the operating system?
Hello
The message means there is a bad path value (probably is something that must be enclosed in quotation marks). The problem is finding * that * one is bad. Try this way:
Click Start, and type Windows Defender, and then the
. Click on tools, and then click Software Explorer. It opens for you? (this is the same list that you get from the control panel). If this is not the case, how it fails? Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org -
Where is the widget that spans the control panel indesign cs5.5
Hi, I'm only learning Indesign CS5.5 on a Macpro using X Lion. I was going through the tutorials and listening to those on covering and splitting columns, the Narrator makes reference to Spanning a widget on the control panel. My program does not seem to have this widget, and when I did a search he just lead me to this tutorial as the mere mention of a covering widget.
I tried to go to the help, but it only led me to what is new articles which is without help because since I have never used Indesign I have no frame of reference for what's new!
So, I'm afraid that your tutorials will continue to be frustrating for me because of the references to the controls and commands that do not exist.
My question is, where can I find the widget mentioned in this turorial Adobe Indesign?
http://TV.Adobe.com/watch/learn-InDesign-CS5/spanning-and-splitting-columns/
You must have your cursor in the text, and then choose mode paragraph (P symbol chosen on the left side of the control panel.
Then look for this:
-
In addition, Visual Studio shows a split second start screen, then disappears without any messages.
Moreover, the same result occurs if I use the installation for each program file. In other words, the execution of the installation executable starts the Visual Studio splash screen, then disappears.
No similar behavior occurs with any other executable installation files or the programs that are listed in the dialog box programs and features in the control panel of Win7.
Same behavior occurs in safe mode.
Hello
Your question is beyond the scope of this community.
Please post your question to the MSDN Visual Studio Forums.
https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=VisualStudio
See you soon.
-
XXXXXX
Hi Randy,
Welcome to the Windows Vista answers Forum!
I have a few questions about your concerns:
(a) game in which you try to read?
(b) is this the case with all games or any game in particular?
(c) you are trying to play the games that are built with Window Vista?
(d) what version of Window Vista do you use?
You can also try the suite of measures to define the association:
1. open the control panel. (Classic view)
2 click the default programs icon.
3 click on the link associated with a file type or Protocol with a program . (See screenshot below)
4 click the extension file type to change which program .exe association opens. (See screenshot below)
NOTE: It may take a while to load up5 click on change program button.
6 if the list, select the program that you want to be associated with (opens) the file extension. (See screenshot below)
(A) check the always use the selected program to open this type of program , and then click OK.
7 if the program is not listed, then click the Browse button and navigate to the .exe of the program you want to default to open the file extension.
(a) select the program.
(b) click on the Open button
(C) check the always use the selected program to open this type of program and click OK to apply.
This should solve your problem.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
How export/import prefs.js? Copy of the file does not work
I want to export/import on: configuration changes. The path is "Firefox/Profiles/i63866ho.default-1384517947097/prefs-js". I also copied prefs.js, all the contents of the file "i63866ho.default - 1384517947097" and the folder "Profiles". Nothing has
-
Is uprgrading to a new identical version to uninstall the old?
"Uninstalling and reinstalling Firefox would not solve this problem because your settings are not deleted after uninstall." I can no longer start FF an option I've read to correct this problem is to open a new profile and transfer my setting and book
-
January 8 new update for XBR65X900A PKG4.101AAA
Just turned on the television and was informed of a new software update is available. PKG4.101AAA said that it was to improve reliability problems. A only took a minute or two to complete. Someone has an idea of what it improved or fixed? With THESE
-
How to restore the contents of the folder workstation in the default format in Windows XP?
Dear Sir or Madam: I have a desktop of Microsoft Windows XP Home Edition Version 2002 Service Pack 3. Contents of the my computer folder is not in the correct format, I want whatever it is corrupt. How to restore the contents of the folder workstatio
-
HP Deskjet 2050 does not print with Yosemite on Mac 10.10
I have a deskjet 2050 j510 series. I have Yosemite on my Macbook Pro 10.10. Printer scan, but when it is supposed to print, it send the document to the printer, it shows and show it is printing but nothing comes out of the printer. Can anyone help?