Change the page size and get the error on the booklet. Why? Only in CS6...
Why when we work with a material to many pages, and all pages have the same measure and change the size of each page (in file-> Document format), we can generate more booklets? I tested version CS5 and it worked perfectly in the version CS6 gives the error:
"The active document uses multiple pages sizes. Booklet printing only works with documents that use consistent page size. »
I checked all the pages and all have identical dimensions between them.
Take a test.
Open a new file with multiple pages. Try to create a booklet. Will work correctly. After that, go to file-> size and change the size of the pages page. Now try to create a booklet. Will give an error.
I tested in a couple of Mac...
Peter is right, that this problem is not being solved in the hotfix released today.
I already signed in to the same bug and sent to engineering for a fix, waiting for a response from the well side!
There is workaround as copy and paste the contents to a new file, but not a fix solution as if now.
Tags: InDesign
Similar Questions
-
Change the page size and text in Firefox 35.0.1
I had a small red P at the top right of Firefox that changed the page size and the fonts that I lost after a reset: How do I get it back?
Do you mean this extension?
- Default FullZoom Level - https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
You can check the "Old data Firefox" folder on the desktop to see what extensions you previously had.
-
I am trying to change my product key and get a 0x800402c9 error when I run the product key Wizard
Update product key
I'm trying to change my product key and get a 0x800402c9 error when I run the product key Wizard, so I am unable to enter the product keyYou must acquire the recovery discs right from the manufacturer - if you're lucky, your office don't reinstall it properly and leave you with the recovery partition that would do the same job.
Read your manual, on the recovery of the system and try the options there.
If they do not work, you will need to contact it manufacturer and order a set of htem recovery disks.
-
Help, please? I changed to a new computer and get an error message that I need to download creative cloud because mine is corrupted. I'm in an infinite loop. I have download the installer and says that it cannot install because I need creative cloud and mine is corrupted. Help please! I'm paralyzed!
[Double question deleted... it is an open forum for other users (sometimes Adobe) answer, not Adobe support...] MOD]
The best option would be to contact the technical support that can remote into your machine & troubleshoot it. Contact the customer service
Concerning
Stéphane
-
I am trying to download items 9 to a new computer and get an error message that says: "the archive file Elements 9 is missing" how to fix this?
as well, you need the 7z and the exe. put them both in the same directory and double-click on the exe file.
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC | XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 10, 11, 12, 13. 9,8,7
- Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
window using the Lightroom 3 link to see these "important Instructions".
-
Try to install the patch KB943729 and get this error. __
Try to install the patch KB943729 and get this error.The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.
Any help with this error.
I've always found the icon on my Start button that indicates that an update is ready to be loaded and I have to restart my computer
Open Internet Explore (only) to http://support.microsoft.com/kb/971058 & re-run the difficulty in AGGRESSIVE mode. [1]
Reboot once more & test.
~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I tried to run Check Disk and get an error message on the completion of the phase 2
I tried to run Check Disk and get an error message on the completion of the phase 2. If I try to run a defrag without having completed verification of the disc it comes up with error message Disk Defragmenter has detected Chkdsk is scheduled to run on the Volume: c. Please run f / dskchk. I tried to run it and nothing seems to happen. I checked that I have no other programs running and she thinks that this is the case.
* original title - I check disk / defrag problems *.
Kevin.
How old is the hard drive? It is still under warranty? The easiest way forward is to replace the drive.
-
I publish the YEAR edge .oam. In Dreamweaver, I insert .oam and get this error: pathname contains Unicode or characters double - bye, try using ascii.
Thanks Nancy, I managed to do the work. When in DW, I had no defined site and tried to insert the oam in
a new html. As soon as I set up a site and created a new html then oam all the inserts work very well.
Thanks for your help.
-
Took pictures on the raw and cannot burn it to a cd. How can I change the to JPEG in photoshop cs6?
Add to that said Jitendra Khatwani , you can select multiple raw files to open in Photoshop. Once you have done so, Camera Raw in Photoshop plugin is open. In Camera Raw, select all the files and then press Ctrl + S, or Cmd + S and choose JPEG from the options and make any other changes you want. Now all the all selected files will be saved in JPEG format for you when you click Save.
-
I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE
- I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE. THIS HAPPENED SEVERAL WEEKS
- THANK YOU, MARK SZYMANSKI
Hi Mark,
Thanks for posting your question in the Microsoft Community.
I understand that you can not install Windows update to KB2761494 with error code 80073AA2. Correct me if I'm wrong.
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
1. is the specific question for the individual or all of the updates?
2. did you of recent changes made to your computer before the show?
Please follow the methods and mark the question below:
Method 1:
You need perform a clean boot to prevent any third party conflicting application from interfering with your computer and try to install the updates.
To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
http://support.Microsoft.com/kb/929135Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.
Method 2:
Manually install the update from the link below.
Framework for drivers Windows version 1.11 cumulative update for Windows Vista and Windows Server 2008:
http://support.Microsoft.com/kb/2761494
Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.
-
I use a common phrase and get an error. Why?
Hey!
I hope someone can help a little or a lot!
I'm not in expressions at all and that would explain why I don't see the "misstake (?)' myself here, but maybe do you.
I copy a code of expression of several tutorials and get an error. When I change a little function I want mainly works. But I still can´t use all the trick because I get a 2nd problem (which may be due to the 1st?).
- OK, so here's the tutorial , I've looked at, for example:
e.d.Films tutorial: rigging leaves characters - lesson 01 - YouTube
- This is the code from the tutorial that does not work with me. ('kopf' is the name of my object null layer)
n = thizsComp.Layer ("head") nullpos = n.toComp (n. anchorPoint¬); fromComp (nullpos);
- It is a small different code form a similar tutorial:
L = thisComp.layer("kopf"); value + L.toComp (L.AnchorPoint);
Insteadt I use another expression that is made by after effects automatically when I do the following: pressing alt and click on the clock, pulling the thing in a spiral on the position of the null object. If I pull the spiral to the null object all I get another error too.
- my code that seems to work so far:
thisComp.layer("kopf").transform.position
So I don't understand why everyone has these = n and l = things all over the place to start. after effects seems to have a problem with it or writes it different it self...? I don't know. it confused me.
- It's the mistake (in German):
After effects warnung: expression wurde augrund eines fehlers deaktiviert.
Fehler line 1 in attribute "position" von ebony 10 (´kopfhals´) in ´kopfhalsnase´ komposition. works:;
the 2nd problem that I get in what follows is:
After I've languished the subject, null objects created and connected to the pins I connect the nullobjects with eachother via spirals. It kind of works but all the points of the subject gets now completely distorted and jumping randmomly somewhere...
That happen to one of the tutorials... why, how?
hope you understand me, know exactly what to do and tell me... I could get the screenshots in case I was very incomprehensible...
Thank you
It depends on what type of layer that you use. This might work (just copy and paste in it to ensure that you get any typos here):
n = thisComp.Layer ("head");
nullpos = n.toComp (n.AnchorPoint);
fromComp (nullpos);
If this does not work, try this way:
n = thisComp.Layer ("head");
n.toComp (n.anchorPoint);
If that doesn't work, post a few screen shots.
Dan
-
Trying to connect Samsung Galaxy SII to Windows 7 and get an error.
Try to connect to Windows 7 and get an error.
Original title: Samsung Galaxy SII
Try to connect to Windows 7 and get an error.
below the software must be installed to connect your phone to samsung for windows
http://www.Samsung.com/UK/support/usefulsoftware/Kies/JSPIf you have already installed this software, it is recommended to contact Samsung support
http://www.Samsung.com/us/support/If you have problems with the usb, visit
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices -
I tried to install Family Tree Maker and get 1310 error writing to file: BCL. EasyConverterLiB.Interop.dll have no idea what to do.
Hello
1. how you try to install this program?
I suggest you to set up your computer in a clean boot state, and check to see if the same problem happens.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
If the problem persists, then contact family tree click the link below:
http://www.familytreemaker.com/support/contact
Hope this information is useful.
-
Adobe Photoshop version: 13.0.1 (13.0.1.3 20131024.r.34, 2013/10 / 24:21:00:00) x 64
Operating system: Windows NT version: 6.2 Architettura di sistema: Famiglia CPU AMD:15, Modello:10, Stepping: 0 con MMX, SSE Intero, SSE FP, SSE2, SSE3
Fisico processore Conteggio: 6 Velocità processore: 3214 MHz
PROBLEMA: PHOTOMERGE NOT RUN! AND GET THIS ERROR MESSAGE: ERROR 22 WINDOWS NOT HAS DI A COSTRUTTORE LINEA 388 VAR W = WINDOW (RES) NEW
PLEASE, IF POSSIBLE, HELP ME. THIS PROBLEM IS ONLY WITH WINDOWS 10!
Hi biagiob,
Seems that the operating system is obsolete.
Photoshop CS6 has not been tested on Windows NT in accordance with this article: Photoshop system requirements
Suggest you to see this link to the similar problem: Photoshop: Err: "window 22 has no constructor" (Win 7/64 bit)
Kind regards
Claes
-
I try to install CC and get this error message: "another version of office of creative cloud or an installer Adobe is running. To continue, please close these first instances. "But there are NO other open instances
Hello
Please try to close the services mentioned below from the Task Manager:
Kind regards
Sheena
Maybe you are looking for
-
"Not a valid error code" when you create a shared variable of data type custom
I am trying to create a shared variable with a data type of a 2d double table. I created a custom control that contains a table with a numeric type for this 2d. Manager of distributed system v12 I select 'add a variable', then select 'of the custom c
-
Error code: 8007F0F4 (cannot install KB973768)
security update did not cause uninstall kb973768. After that I tried dawnload file error sign 18007F0F4 everyupdate result is same security update has failed. How can I solve this problem? I installed microsoft security essential so I can ignore?
-
Photo screensaver on loggon screen Win7 - "there is no images found in"C:\Windows"
Hey there, I try to make a screen saver that appears when no user is logged on. I added a few keys in the registry. HKEY_USERS->. By DEFAULT-> Desktop-> ScreenSaveActive = 1 ScreenSaverIsSecure = 1 ScreenSaveTimeOut = 10 SCRNSAVE. EXE = path to the .
-
I know the OfficeJet6600 HP runs only under the name of wireless and normally gets an IP address from the router. I don't have the printer ON all the time (and here we have power outages in Maine, then the router restarts more often desirable - a goo
-
HOW CAN I ATTACH A PICTURE TO AN E-MAIL WITH THE HELP OF PICASA 3
I can't send a picture using picaso attached to an email. Once I click on send, it does not send