Change the part of the image, keeping the lighting.

Similar Questions

• Help change the lightness of the foreColor script

  Hello

  I would like some help with the scripts here: I am currently using this script that I found in the forums to change the brightness of the current foreground color

  *****************

  #target photoshop

  var foreColor = new SolidColor;

  foreColorH = app.foregroundColor.hsb.hue; Initial value

  foreColorS = app.foregroundColor.hsb.saturation;

  foreColorB = app.foregroundColor.hsb.brightness;

  foreColor.hsb.hue is foreColorH + 0.;

  If (foreColorB + 10 > 100) {foreColor.hsb.brightness = 100}

  else {foreColor.hsb.brightness = foreColorB + 10 ;}

  foreColor.hsb.saturation is foreColorB + 0.;

  app.foregroundColor = foreColor;

  *********************

  Modify this script to brightness-10 only the result below (red arrows), but what I really need, is to change the lightness down if the color picker is going down, as the blue goes to the top.

  Thanks much for any help.

  

  This line is incorrect. It is assign the value of brightness saturation:

  foreColor.hsb.saturation=foreColorB+0;
  

  It should be:

  foreColor.hsb.saturation=foreColorS+0;
  

• Where do you change the lightness/darkness interface?

  In CC CS6 where can we change the lightness/darkness of the interface?

  Respectfully,.

  Leonard Michael

  CS6 has no dark interface. Tonight, you will be at 8 PM PDT

  able to download and install the new CC InDesign will be 64-bit

  and with a dark interface.

  Bob

• How can I change the lighting on my laptop keyboard omen

  I have a HP omen for laptop 15-5000, how can I control the lights on the keyboard?

  Thank you

  Bill

  Hey Bill,.

  There are full instructions to set up the LED lights here: using the software to customize game OMEN of HP keyboard.

  Make sure you have the latest version of the HP System utility is installed: HP Control Panel OMEN impossible change LED lighting.

  -Wes

• To change the lighting Satellite A300-247

  Hello all I saw on the model of the internet as mine Satellite A300 PSAGCE easy keys as their illumination in the color blue my question of the alphabets I Yocol to change also the blue Thank you to all

  Hello

  Yes, I know what you mean because I have too many Satellite A300 and it has a white light, but the color isn't interchangeable.

  I think to change the color, you need to change the s light or something else. In my opinion that s is not possible or very difficult and t shouldn't be done because you will also lose the warranty.

• Satellite U400 - How can I change the lighting?

  Hi there, sorry - maybe its an old question, but I haven't found an answer here.

  I bought a laptop Satellite U400 PSU44E 13.3 inches.

  How can I turn on the lights on the keyboard?

  Thanks in advance.

  Greetz
  Andy

  Hello!

  Lighting you can enable/disable in the BIOS. There you should find an option to do this and it should be set to activate.

  But as far as I know the keyboard, there is no lighting. It is possible that the touchpad and multimedia keys between the screen and the keyboard.

  Good bye

• Web Page color - can't change the color of the browser and tab

  original title: color of Web Page

  I can't change the light blue color for my browser and or tabs when you type in the address bar, but can change the rest of the color of the page of the color light blue need assistance so that everything is a color. Thank you.

  Hi dominicalexander,

  You can follow these links & check if it helps:

  Change the colors on your computer

  Change the colors and fonts used for webpages

  Change desktop theme

  Hope the helps of information.

• How to change the Format of the light to dark in Adobe Flash Professional CS6?

  Hello, I was wondering how to change the light to dark background in flash professional. All the tutorials are telling me to go to the preferences of the user, but I can't find it anywhere!

  I look in general preferences, but I don't see it anywhere. I was wondering if there was another way to user preferences, or change the color format.

  Thank you.

  This setting is available in flash cc.

• Help: after changes, the content of part of an image touch tones in the other area of photography

  Hi all

  It's a complicated thing, and it's really shake me up. I really hope someone can help.

  I'm editing of hundreds of images (a time-lapse of a river movie) and from time to time a ship comes across the scene. When he picks up a certain proportion of the scene (about 1/10), the lighter tones in the image (especially the sky) change and are lighter. When the boat leaves the scene, these tones return to what they should be. All changes are exactly the same from one image to the image, it is only when a boat comes into shot there is a problem with discoloration unwanted tones. Changes include: all cursors Basic, tone curve, HSL for several shades, as well as added upper and radial filters.

  
  

  I'm not quite sure, but I think that when a ship arrives in scene, other settings change as well (for example, I think maybe for clarity, but I've been focusing on easier to see in the key changes). No numbers change however.

  When there is zero edits, then a boat entering the shot is without effect the best tones of the image (the sky). From what I can tell, if I it si je l' ai have edit anything which affects the tone of the sky (for example overall brightness, or graduated filter or the overall clarity), then a boat coming in shot causes the brighter tones of the sky to become best, even if no parameter digital don't alter. I have reproduced the issue by using the same set of images with unique global changes and just graduated filters. I thought it was a problem with global changes, with perhaps a parameter being calculated on the fly for each image, but I did a test with just a graduated filter as well. It has been fixed to not come by hence the boat is in the shot, it's just covered the sky and the problem yet has occurred.

  
  

  A very interesting observation: if I clone or heal on the boat using the removal tool room in one of the frames problem, the lighter tones then go back to what they should be. When I delete the clone, distributed tones mean. If I change the opacity of the clone hiding in the boat, the tones go unhinged proportionally.

  I am editing in Lightroom 5 on a Mac OSX 10.9.5, and the photos in question are raw, shot on a Nikon D3S files (locked in place, the camera movement is not a factor). As a film, a sudden change in tone is really obvious: the movie seems unacceptable flicker. It is essential that I have the necessary control to ensure increase smoothly to an image in the image, and I would have thought that now detail all of the same parameters would be all I need.

  It really bites. I'm only enter these time-lapse movies, I used to shoot only stops, and I never noticed a problem like this when editing in LR or ACR in the past (Note: the problem persisted when I tried via Bridge and ACR). FYI: I am a very experienced editor, been using LR since the 1.x version and edit in photoshop since version 3 (not CS3, but version 3, altogether at the time!). Never been this frustrated.

  It of a very weird question and cause me to spend hours of extra work to fix it (especially with the adjustment brush and it is very difficult to exactly match what the tones expected to look like).

  Thanks in advance for any help, I really need.

  Chas

  PS. I'm happy to put in place a set of examples of raw files in this series on Dropbox, if someone wants to try to reproduce the problem.

  Time lapse videos like this, you should avoid using one of the HDR-like adjustments. These are shadows, made prominent, white, black and clear. These effects affect different parts of the image according to the overall brightness of the image. Lightroom performs a comprehensive analysis to create on-the-fly masks that affect where the sliders affect the image. When a boat enters the picture, the overall brightness will probably down and Lightroom updates the balance when highlights may affect the image at a different point, which makes the effect of the stronger slider. You might try to use the tone on these images curve and use the graduated filter only with exposure setting (i.e. no clarity, shadows or highlights slider adjustments).

• What would be the best way to change the color of a part of this picture? (image attached)

  I am on XP using PS CS4.

  Please see the picture below. I would like to change the color of the shirt/deck of this lady, and I was wondering what the best way is to do it. I know that if I try to change the color, white bowls change color as well. In the past, I've isolated parts of images using paths, but I wanted to know if it was the most effective way. Maybe the masking is the answer. I just wanted to hear from the pros

  

  Thank you.

  I'm not pro, but you can isolate areas likely to be affected by the change of color. Try the quick selection tool (which detects the edges) with mask edge/refine refine to refine the selection.

• Change color effect only a part of an image, such as only the left side?

  I have an image which is in fact a bunch of blue dots.  On a keyframe, I want to change the left side of the image to red dots.  How can I do this?

  There are dozens of acceptable and accepted ways to do it.

• Change the color of a part of the image

  CS4 4.2.1

  I want to change the color of a small circular area of the image (more precisely, a mic windguard) from white to a less intrusive darker color.  The movements of the area a bit during shooting, but not too much.    How?

  Tim,

  I'm happy to hear to remove. Who will be the best.

  Discover Track Matte Keying, because it can be very useful for all sorts of things, follow-up of blurs (think license plates and faces), to soften skin tones, to the addition of "cupcakes" to a microphone...

  Sorry for the Internet connection. I was worried that we had been so far in left field, who fled from you.

  Good luck

  Hunt

• I need to change the size of my image file, but keep the same pixels. Possible?

  I'm trying to upload an image on a mobile advertising platform (Adfonic) with the following requirements: the dimensions of the Image 216 x 36 pixels; 3.0 KB maximum file size; GIF, JPG, PNG supported file formats. I figured out how to change the pixel size, but now my file is too large. I have Photoshop CS4 Extended & Vista.

  I changed the resolution of the file but then changes the size in pixels. What can I do?

  Thank you!

  maven123 wrote:

  I tried as a JPG & a PNG, GIF option was not available or I would have tried it too. It was originally a JPG and when I saved it as a PNG, it was a bit smaller but not enough.

  Try saving your document using "Save for Web" use jpeg and lower quality and all the metadata of the band.   Think that should generate the smallest file possible.

• Change the images in a movieclip via a loaded swf file

  I am creating a game in which there are 4 buttons. The 4 buttons are baskets with labels of solids, liquids, gas and fire. When the button is clicked, the basket that keeps the catcher/character depending on which button is clicked. This time I connected this part of the game in other areas. My problem is that whenever I load this part of the game that the buttons can not change the cart that my catcher holds, it cannot change the images. But if it is played individually it works fairly well. Why is this?

  It's all over. I just copied the same framework of all my objects on catcher other steps.

• How can I change the owner of a Mac while keeping the software?

  Hello

  I saw online sales of used sellers Mac with the included software. A part of the software includes Adobe CS6 Master Collection, Final Cut Pro X, Microsoft Office, etc.

  If I buy the laptop, how I would change the possession of the laptop to me while keeping the software on the computer?

  If I have to use my Apple ID, wouldn't that let me use Final Cut Pro as it is allowed to the former owner ID and not mine?

  In addition, is there advice on how to move from Final Cut Pro X (and other software) to another Mac if I happen to get another?

  Thank you

  Matthew

  Unless sellers are explicitly including transfers of software license, you cannot continue to use the software without eventually getting into trouble. Adobe CS apps can be installed on multiple machines, but they cannot be activated on two. If the 'included' software has already been activated by the previous owner, you won't be able to use it.

  The inclusion of the high-end systems used on applications should be a red flag: avoid sellers.

• BROWSER - Ive changed the font, but not the web pages are changing - all parts of only - how to fix?

  Hi - I used the font setting to change my smaller font, so fewer scroll...

  but I did it for the site
  -only the part of the site has changed for example not the pane to the left of the site has changed. the main part of the window of the browser has changed
  -not all the essential content of the modified pages for example change windows do not have, but selection windows has
  ---
  Ive read the
  http://KB.mozillazine.org/Issues_related_to_fonts

  but that did not help.

  is this a limitation of firefox?
  I'm on version 11
  ---
  Thank you

  Hi seasaltseasalt,

  Have you tried to use the Zoom? This will decrease the size of everything on the page, including images. This might be perfect for what you're trying to do.

  Hope this helps!