Change the plate Contact II Script - Script of the Alterar Board Contact II

Similar Questions

• Try to set / change the password BIOS admin via the script WMI on ThinkStation D20

  Hello Lenovo Community!

  Start using the WMI Lenovo_SetBiosSetting class on a D20 system.

  If I understand the documentation that there is a limitation on the BIOS password in the past, but I updated to the latest BIOS Rev who support States was added for this feature.

  I use a script that changes the supervisor on computers password successfully thinkpad, but when even to run the script from command line on the D20 system it returns "SUCCESS" however to change the password did not effect!

  I'm using the right parameters are the standard of lenovo

  ' pap, oldpass newpass, ascii, we.

  I thought maybe "pap" is not the correct setting for password Admin on the D20, however the WMI available, posted 2010 guide, does not show otherwise.

  Someone at - it an example script that they can display successfully change the password on a D20 system?

  Please and thx!

  Did you run the SaveSetting script after changing the password?

  You can get the SaveSetting script from the sample scripts D20 located at the following link:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=UM002033

  You can use the script SetAdminPassword from the library of scripts of series E, then a follow-up that with something like what follows before restarting:

  "cscript SaveSetting.vbs" originalpwd, ascii, we.

  Replace 'originalpwd' with all what your existing password was at the time wherever you booted the system.

• change the array type in a script

  I have a script that uses a model to generate code. So far, I have a refnum in an array of doubles (the default type of the table in the model). Now, I need to change the types of elements in the array. I tried the 'set' vi in utilities VariantDataType table, but does not. How can I do this?

  Here is a way.

  

• Change the LV version currently active in the batch script

  Hello

  I use two different applications on my computer, and one of them should run in LV 2011, this in LV 2012. The two versions are installed and it works fine until I start the correct version of LV manually before you start the application (start and end of the required version of LV in C:\Program Files (x 86) \National Instruments\... before starting my request).

  I want to do this automatically in a command script, so basically I want to do the following:

  * Check which version of LV is currently active (last LV start version)

  * If the currently active version of LV is NOT required: change to the required version of LV (by starting LV and close or preferably do differently if someone could tell me how)

  * If the currently active version of LV is required: do nothing

  There are two problems I couldn't solve so far:

  * How to get the LV version currently active (I checked the windows registry, but I see that my installed versions of LV, and not one that is currently active)

  * How can I close LV with a batch script (or how to change the version of the currently active LV without opening and closing)

  Thanks in advance,

  Tobias

  PS: I did the same for the different versions of TestStand, by reading the TestStand system and if requuired environment variable change the version of TestStand via the command-line of the TS Version selector. It works fine, but there is no system environment variable that indicates the currently active version of LV.

  OK, this is a very informal Tip:

  In the registry (regedit), you will find the key 'HKEY_CLASSES_ROOT\LabVIEW.Application\CLSID '. This default key should contain some weird ID information.

  If you search for this key, you will find an entry for the key in the "HKEY_CLASSES_ROOT CLSID" section.

  If you have several versions of installed LV, there must be a key in the entry which will give you the path to the active version of NV. don't forget: this is the version that you have opened up to the last successfully!

  Please note that keys can change from system to System. Also different versions of LV can use different keys like "routing information" the way of the real LabVIEW.exe.

  hope this helps,

  Norbert

• Use scripts to change the name of the tab

  Hi all

  I'm trying to use scripts to add tabs to a tab control in an existing VI.  I am able to add new tabs easily enough, but I can't understand how to change the name of each tab when they are added.  Each name is extracted a TDMS file using a loop for.

  I looked through the existing discussion forums, and there are a few old messages that indicate I should look for the 'independent Label property', and that I should put it to allow me to change the caption of the tab.  There is always an explanation of this property in the help files, but I am unable to find my path to it in the current schema.

  Assuming that this property still exists in my version (2012), could someone tell me the correct sequence of references and property nodes to access this property?  Right now I use the class "TabControl".  If this property is obsolete, can someone let me know if there is a new method to achieve this?  Thank you.

  GSinMN

  After you have added the page, download the Pages property of the index of the newly added page, tab control, use the PageLabel of this page for the label.  It would be cool if the Add Page method returns the reference to the new page.

• script to change the print queues for use on Server 2003 winprint print processor

  Need to change the winprint print processor to 2003 Server backup and restore on Server 2008.  Was hoping to use a script to do

  Hi Randy,

  You can ask your question in the TechNet Windows Server Forums: http://social.technet.microsoft.com/Forums/windowsserver/en-us/home?category=windowsserver

  Thank you.

• How can I change the script on my windows live mail in English after it being hacked

  my windows live has been hacked. I decided to go back inside. But unable to change the script back to English.

  Windows Live Mail questions belong here: http://windowslivehelp.com/product.aspx?productid=15

• How to make a VB script on the computer after you change the files?

  Original title: HI! I have to run a VBscript on windows7 as modfying user (not administrator) files in c:\program files\mycompany. Is this possible?

  It works to disable the UAC. There is no way to let him work with UAC on? (Perhaps change somehow permissions files?)

  You have two options:

  • Turn off UAC (not recommended)
  • Change the script so that it generates a UAC challenge (to which the user must respond with an admin account & password).

• Script to change the key of win8 silently

  I need a script to change the key for win8 silently, there are hundreds of systems whose key is goinng expires soon, so I need a script that can the key Active silently without user interaction. Planning to deply the script using SCCM, any suggestions would be helpful. Thanks in advance...

  Since this isn't a scenario of domestic consumption current, you'll get best advice of experts of INFORMATICS:

  http://forums.technet.Microsoft.com

• Can I change the order of the pages in the script?

  Hello, my question is quite simple, that I wonder if it is possible to rearrange the pages in the form of script?

  Just as a brief description, my form is sort of work order/list control but when finished, I want to be able to rearrange the pages of forms to create a report.

  My first thought was that it would seem like a trivial thing, and there will be some sort of option to change the page number of each page of form or something like that, but I found no information by Googling unfortunately.

  I'm often with some sort of way to get around the limitations and what I think or if there is no easy way to move things by script is just to have a page in the 'other place' duplicate hidden in a first time, and to "pass" a page, I just hide the page where it is initially and then view the page in double on the secondary site.

  Again, this would be quite heavy, having to have duplicate pages and scripts of all areas for synchronize. So, I was hoping for some xfa.layout. shenanigans? Is there a way to actually reorder the pages in the script, or do I have to play hide and show?

  (On a side note, I do not seem to find any material reference on the object xfa.layout? it exists somewhere, as I have a problem to find in the regular documentation.) Using LiveCycle Designer ES2 btw.)

  Best regards, Mattias

  I'm afraid that the show / hide approach may be your only other option. LiveCycle is model based, not paginated. It is a key element of the tool because it allows content dynamically flow across multiple pages on content requirements.

• Change the paragraph by Script Style

  Hello!

  I don't know if this is the right place for this question but since its related to scripting, I'll ask here.

  Is it possible to change the paragraph Styles InDesign with a Script?

  For example, I need set Format1 hyphenation to specific values properties without changing the other properties. For Format2, I need to change other properties such as the Glph scaling.

  Like I need to do this with a lot of files, I suppose that the best way to archive it could be a script.

  Is there someone who had an idea on how to do it?

  Thanks in advance

  Thomas

  You're right, this can be done very effectively with a (relatively) simple script. This is an excerpt from a longer script of mine which covers a changing choice of design of end minutes documents open at once:

  for (i=0; i
  For a list of all paragraph properties that you can change, look in the ESTK help or (in a more user-friendly way to read and search) in an online version of these same data: InDesign ExtendScript API (10.0).
  		   

• How to change the Source with EditText text in my Script?

  Here is my code, actually, the thing is I want to change my myEditText text in my control panel:

  function myScript(thisObj) {
            function myScript_buildUI(thisObj) {
                      var myPanel = (thisObj instanceof Panel) ? thisObj : new Window("palette", "My Panel Name", [0, 0, 300, 300]);
  
                      res="group{orientation:'column', alignment:['fill', 'fill'], alignChildren:['fill', 'fill'],\
                                myEditText: EditText{text:'EditText text'},\
                                myButton: Button{text:'Button Name'},\
                      }"
  
                      //Add resource string to panel
                      myPanel.grp = myPanel.add(res);
                      
                      
                      var texto = myPanel.grp.myEditText.text.value
                      
                      var btn =  myPanel.grp.myButton
                      
                      
                      
                      btn.onClick = function (){
                          
                          app.project.item(2113).layer("TXT 1").property("Text").property("Source Text").setValue = texto
                          
                          }
                      
                      
                      
                      
  
  
                      //Setup panel sizing and make panel resizable
                      myPanel.layout.layout(true);
                      myPanel.grp.minimumSize = myPanel.grp.size;
                      myPanel.layout.resize();
                      myPanel.onResizing = myPanel.onResize = function () {this.layout.resize();}
  
                      return myPanel;
            }
  
  
            var myScriptPal = myScript_buildUI(thisObj);
  
  
            if ((myScriptPal != null) && (myScriptPal instanceof Window)) {
                      myScriptPal.center();
                      myScriptPal.show();
                      }
            }
  
  
            myScript(this);
  

  Something like this should work:

  function myScript(thisObj) { 
  
    var textStr = "";
  
    function myScript_buildUI(thisObj) {
  
    var myPanel = (thisObj instanceof Panel) ? thisObj : new Window("palette", "My Panel Name", [0, 0, 300, 300]);  
  
    res = "group{orientation:'column', alignment:['fill', 'fill'], alignChildren:['fill', 'fill'],\
    myEditText: EditText{text:'EditText text'},\
    myButton: Button{text:'Button Name'},\
    }"
  
    //Add resource string to panel
    myPanel.grp = myPanel.add(res);
  
    // I added the next two lines.
    textStr = myPanel.grp.myEditText.text;
    myPanel.grp.myEditText.onChange =  myPanel.grp.myEditText.onChanging = textStringUpd;
  
    myPanel.grp.myButton.onClick = function (){
  
    app.project.item(2113).layer("TXT 1").sourceText.setValue(textStr);
    //or tell the script to change the soureText property of the currently selected layer (remove the two slashes from the line below and add them to the line above)
    //app.project.activeItem.selectedLayers[0].sourceText.setValue(textStr);
  
    }
  
    //Setup panel sizing and make panel resizable
    myPanel.layout.layout(true);
    myPanel.grp.minimumSize = myPanel.grp.size;
    myPanel.layout.resize();
    myPanel.onResizing = myPanel.onResize = function () {this.layout.resize();}
  
    return myPanel;
  
    }  
  
    var myScriptPal = myScript_buildUI(thisObj);
  
    // I added this function.
    function textStringUpd() {
  
    textStr = this.text;
  
    }
  
    if ((myScriptPal != null) && (myScriptPal instanceof Window)) {
              myScriptPal.center();
    myScriptPal.show();
    }
    }  
  
  myScript(this);
  

  I've added comments to indicate the changes that I made

• Add/change the columns of data type (scripting)

  Hello

  I am writing a script to add default columns and their values in tables. So far, for me, it is possible to add columns to an existing table in the model.

  Then, I want to add value to the data type. I discovered there is a method called getDataType(). So far, I have not found the "setter; for this property.

  Like other scripts, I started by creating a table with columns, and then using the API to read the values.

  A simplified version of my code:

  get the columns of table

  myTab var = model.getTableSet () .getByName ("T_POSITIONS");

  colArray = myTab.getElementsCollection () .toArray ();

  loop through columns

  for (i = 0; i < colArray.length; i ++) {}

  the type of var data = colArray [i] .getDataType ();

  model.getAppView () .log (colArray [i] + "a datatype" + dataType);

  colArray [i] .setDataType ("VARCHAR2 (1)");

  }

  An error occurs when I want to run this script: could not find setDataType function in the object ID.

  I can't find the right method to add/change the datatype property.

  Any information would be appreciated.

  Hi Bart,.

  Here's what's in the column in the XML file:

  
  FDB11R21
  EMPLOYEES
  FIRST_NAME
  
  2015-01-13 12:45:08 UTC
  First name of the employee. A not null column.
  HR_870
  true
  false
  1
  LOGDT024
  20 BYTE
  false
  
  

  20 BYTES

  If you need set the size in "20 BYTE" or "20 CHAR".

  Philippe

• script to change the data type of column

  Hi gurus of the oracle.

  I have 190 tables in my database.

  I have the column type CHAR of all these tables data.

  I need to change the data type of CHAR in VARCHAR2 for all these tables...

  There the script to change the data type of all tables at once?

  Please help me in this regard.

  Thanks in advance

  Concerning

  REDA

  Hello

  There is nothing built-in to Oracle SQL to do.  Maybe your front-end has certain characteristics.

  You can write dynamic SQL statements to do.  In other words, you can write a query that the output is a SQL script like this:

  ALTER TABLE TABLE_A CHANGE (A_TXT1 VARCHAR2 (5))

  A_TXT2 VARCHAR2 (10));

  ALTER TABLE TABLE_B CHANGE (B_TXT1 VARCHAR2 (5));

  with one row for each column of type CHAR.  Notice how the first line of output for each table begins with ALTER TABLE... but the later lines at the same table.  Similarly, the last line of a table (which will be the same as the first row, if the table has only one column of type CHAR) to end with a semicolon, but other lines are not.

  Here's a way to generate and execute such a dynamic script in SQL * more:

  -Disable the features that make the output easy to read, but hinder the execution
  SET FEEDBACK OFF
  SET LINESIZE 500
  SET PAGESIZE 0

  -Create fix_char.sql
  COIL c:\some_pathename\fix_char.sql

  SELECT THE CHECK BOX
  WHEN ROW_NUMBER () OVER (PARTITION BY table_name
  ORDER BY column_name
  )  = 1
  THEN 'ALTER TABLE ' | table-name
  || "CHANGE (").
  ELSE «»
  END
  ||        column_name
  ||        "VARCHAR2 (').
  ||        DATA_LENGTH
  ||        ')'
  ||        CASE
  WHEN ROW_NUMBER () OVER (PARTITION BY table_name
  ORDER BY column_name DESC
  )  = 1
  THEN '); "
  Output END AS
  Of user_tab_columns
  WHERE data_type = "CHAR".
  ORDER BY table_name
  column_name
  ;

  SPOOL OFF

  -Turn on the features that make the output easy to read, but hinder the execution
  SET FEEDBACK ON
  SET LINESIZE 80
  SET PAGESIZE 50

  -Fix_char.sql performance
  @c:\some_pathname\fix_char

  It's good to change all the CHARIOT of VARCHAR2 columns.  The CHAR data type is nothing trouble.

• Change the Gallery HTML / Script

  Hi all

  New to the Forum, so please be gentle!

  I want to change some of the script / HTML contained in the galleries of stock. I know where the files are located, and what I need to change, but my PC will not allow access to these files by saying that they are protected.

  All the guys and galls allow snippets of advice to edit pages in an editor?

  I intend to backup the files first, but as I said, they seem protected against tampering.

  Thank you very much, and I'll be happy to provide you with more information if necessary.

  Simon

  You should not edit these files - but assuming you can see them, you can copy galleries (IE files) for your files and folders for the user templates:

  • Win7: Galleries C:\Users\USER\AppData\Roaming\Adobe\Lightroom\Web
  • Mac: USER\Library\Application Support\Adobe\Lightroom\Web galleries

  You may need to create the "Web galleries" folder.

  Start by editing galleryInfo.lrweb. You will need to change the title to something, you would be able to recognize in the Web and change the line id to something unique to your gallery. Restart Lr and your gallery should be displayed in Style available to the Web Control Panel - as well as built-in ones.

  You can see an example of a Gallery HTML changed here