Change the record level of logs saved automatically in WCI with recorder

Similar Questions

• Rich Table: entity validation fails, but the user can change the record! : O

  Hello
  I develop with JDeveloper 11.1.2.1.0 and I have the following problem. I have a rich table editable according to entity/view with a line entity level validator method that checks the consistency of rank according to custom rules.
  I noticed that if the validator fails, the error message is displayed correctly, but it is possible to move to a different folder and this causes a lot of problems. I need avoid recording of variation when this validator fails. I know there is a way to block navigation on an element using clientListener and javascript, but it's a different need because I don't want the user to change the recording while the validator fails.
  How can I do?
  Thank you
  
  Roberto

  Roberto R SCC wrote:
  I noticed that if the validator fails, the error message is displayed correctly, but it is possible to move to a different folder and this causes a lot of problems. I need avoid recording of variation when this validator fails. I > know there is a way to block navigation on an element using clientListener and javascript, but it's a different need because I don't want the user to change the recording while the validator fails.
  How can I do?

  When you change a line, it is the currentRow on the iterator. You do not want any line to become the currentRow.
  I would go to this topic, in this way: substitute the selectionListener table and the listener to custom selection, check if the current currentRow (the one you are editing) isValid (EntityImpl::isValid).
  Proceed with the treatment of the selection event only if it is validated... You could even show an error or a warning message asking the user to provide valid data and even commit the line before choosing another.
  (Sorry, don't have an example of a code of practice now)

• change the zoom level as IE

  How to change the zoom level as IE?

  This has happened

  Each time Firefox opened

  is n/a

  Extension of the default Zoom level:
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

• Change the audio level of many clips in the browser?

  I have 1000 or more clips in these images of GoPro project, cameras, and selects music, with many clips that have audio very strong especially the GoPro mounted on the vehicles off the road as they motor at high speed through obstacles. My edit in place includes 20/20 speakers, and even though I have a moderate level of audio that is configured for editing when I select images in the browser that has strong audio I need to stop and lower this clip in the browser at once and he eats a precious time.

  Is it possible to change the audio level in many clips selected in the browser?

  Select the clips.

  Go to the Clip > Audio Options > Audio Gain

  When the Gain Audio pane opens, set Adjust Gain of: -12

  

  Click OK. You can experiment on a clip or two to see if this gain reduction is too much or not enough for you.

  MtD

• Changing the ObSSOCookie level

  I have a requirement where I want to change the obssocookie level after authentication.
  Is this possible?
  
  Thank you

  You can use the following code in your plugin to open the list of credentials file, check the value of the variable ObAuthentSchemeLevel and set it to the level of security to use for an application.

  schemeLevel = pFnBlock-> GetCredFn (pInfo-> Creds,
  "ObAuthentSchemeLevel");

  If (schemeLevel! = NULL) {}
  schemeLevelAsInt = atoi (schemeLevel);
  schemeLevelAsInt += 10
  Iota (schemeLevelAsInt, chamois, 10);

  pFnBlock-> SetCredFn (pInfo-> Creds,
  "ObAuthentSchemeLevel", buff);

  Thank you
  GK

• I changed my phone number, but I can't update the 'ACCESSIBLE AT' number on my Apple ID account Please can someone explain how I can change the number of 'ACCESSIBLE AT', to update my account with my new number?   Thank you.

  I changed my phone number, but I can't update the 'ACCESSIBLE AT' number on my Apple ID account Please can someone explain how I can change the number of 'ACCESSIBLE AT', to update my account with my new number?

  Thank you.

  Try going into settings > FaceTime and turn off FaceTime. Then go to Messages and turn off iMessage.

  Turn off your phone and then new.

  RETURN to FaceTime and turn it on again, even with iMessage. He has to try to reactivate and your new number should appear (you can see this more down in the addresses to send & receive). You may need to log into your Apple ID for this operation.

• Try to download Tiff to jpeg. Message on the button "file should be saved as a copy with this selection."

  Flatten all layers ale but welcome + F.

  Image says "#Edit.tif @ 50% (RGB/16 *)."

  Whenever I try to save as... .to leave tif to JPEG. This message will appear on the bottom "file should be saved as a copy with this selection.

  Thank you

  Dorota

  After looking at your images, it seems that what you thought was a flattened file is not actually flat. Hard to tell because of the Save as dialog box

  covering the major part of the layers panel, but it seems that there is always a layer above the background layer.

  In addition, when you see the warning triangle sign in the Save dialog box slot, its an indicator that shows you what is in the question why something

  is saved "as a copy. In your case, there is a triangle next to "Layers".

  Rush 16-bit, without layers and not Extra channels and you should be good to go.

  Chris

• C870-15R satellite - cannot change the brightness level

  Hello

  I have a problem with brightness. The screen is too bright, maximum power. I can't diminish with F2 or F3, even with the software solution...

  The other problem is, from Toshiba Web site provides more pilots. I can't find the reference in the site with automatic detection, even with the serial number.

  Could you please help me, use this computer with sunglasses is not an option...

  Thank you

  Can change you the brightness level using the options in the options of food directly?
  Check it please this option.

  If auto-detection doesn t work try to find all orders manually.
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

• How can I change the volume level on the Libretto W100?

  Sorry everybody explain to me how do I adjust the volume in * model Libretto W100 10 d * because I have a serious problem with any program like Media Player and others.
  I tried to regulate in the control panel, but is too slow! I'm disperate help me please

  Thank you very much!!!

  In the taskbar on the right site, you can see speaker symbol. Click on it and when the volume control is displayed that you can change the level by moving the controller up and down.

  It works for you?

• Change the partition where to downloads and automatic updates

  My C partition is the main boot partition and it is full. 29G all exhausted. I copied the files of many program and pasted in the partition with 188 free G D. But it doesn't allow me to delete the original file from C to free up space. How do I do that? It says destination refused. Also, how can I change the partition of C to D that take downloads and automatic updates? I'm tired of this constant problem and I tried everything, including disk management to solve the problem. I'd appreciate a solution! Thank you

  Windows Vista Help: Strategies to free disk space:
  http://Windows.Microsoft.com/en-us/Windows-Vista/strategies-for-freeing-disk-space ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to operate the laboratory discovered multi-function synchronization with multiple devices and change the recording time?

  Hi, I'm new in Labview. I need help for:

  1 change a program multi-function in order to record the data of three cards daq (devices 1-3) and output through the map (1 unit). The current program was created to record and output signal of one of the card (1 unit). I try to choose multiple devices when I run the program, but there is an error 200558 shows "a task cannot contain multiple independent devices. Create a task for each independent device.

  2. change the duration record for a longer period, for example: 0.1 s. Currently, the recording time is s 0.009971.

  I joined the multi - funtion.lld. In this library, "des_v2_Multi-Funtion_Synch I - AO.vi" is the program that I need to change. I've also attached a file of input for runing the program signal.

  Thank you very much!

  Sincerely,

  Jie

  Hello Jshen6,

  You can have different examples of VI if you do not use the same version of LabVIEW. I am currently operating on LabVIEW 2013 SP1. Whatever it is, this article should be useful to you that he describes in detail how to synchronize multiple tasks of series M.

• How to change the records of Windows Media Center by car

  Is there a way to change which record TV Player Windows Media Center programs. My C drive is full, but it is the E drive for data that is empty.

  Tasks, settings, TV, recorder storage
   
  Saturday, October 16, 2010, 07:12:07 + 0000, nhsslave wrote:
   
  >
  >
  > Is it possible to change which record TV Player Windows Media Center programs. My C drive is full, but it is the E drive for data that is empty.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Changed the record office to another drive, but now nothing appears on my real desk

  Hey everybody,

  So, I recently had a hd crash and decided to try a hybrid ssd/hdd. I have my boot of my ssd, which I guess by default placed the desktop folder in the same drive. After some research, I found how to change the path to the C: Office, which was the ssd, K:, that was the hard drive. Now every time I save anything on the desktop, it saves on the K: drive but nothing comes up on my real desk.

  I guess it is because the path Office is on the C: drive, but can I change it so that it displays all of my K: drive?

  I am running windows 7 Professional and use the double disc WD Black2.

  Thanks in advance!

  Moving files in Windows 7 and Windows 10 user

  1 this is the standard way to work [I've included in the procedure to move all user folders rather than just the desktop folder you mentioned and I spoke also defining the IE file downloads].

  1.1 create a folder K:\Documents & moving * your data inside files [move content from C:\Users\yourusername\Documents not the folder \Documents C:\Users\yourusernamehimself].

  [* Windows will offer to move the files on you when you change the location definition in subsection 1.2 tab, but it can get really annoying if it fails, then it is safer to move yourself in advance.]

  1.2 set the location in \Documents C:\Users\yourusernametab to point to K:\Documents.  You do this, as you must already know, by doing a right click on the file C:\Users\yourusername\Documents and selecting Properties and then click on the location tab.

  1.3 set permissions to K:\Documents by clicking right on & selecting share with specific people or one right click on it & select Properties then the sharing tab.  [You can allow yourusername & accounts Admin reading & writing, but other users ['allowed users'] to have, for example, list only permissions].

  1.4 repeat 1.1 - 1.3 for these other user folders [I showed records that I moved them just for example]

  Music K:\Documents\Music,

  Photos K:\Documents\Pictures,

  Videos K:\Documents\Videos,

  [IE] Favorites K:\SystemSettings**\Favorites

  Links K:\SystemSettings**\Links***,

  Search K:\SystemSettings**\Searches.

  [* SystemSettings - it just suited my backup plan to separate these parameters in one group different file.]

  [* Links - This is the entrance to 'Favorites' that appears at the top of the Windows Explorer Navigation pane - he has very wisely been renamed in Windows 10 quick access since that's what it is dedicated]

  A folder of additional user exists in Windows 10 - the screenshots folder and my advice on the use of this facility and moving his file is in setting and checking of the screenshots folder

  - - - - - - - - - - - - - - - - - - - - -

  2 verification of the task and correction of errors by using the registry; check the IE, downloads folder

  2.1 it is probably possible to change the parameters of location in the registry manually rather than use the location tab, but I only looked at him subsequently to check happened correctly and to correct an error I had made.

  2.2 as it is to change the registry the usual warning apply [back to the top of all, make an image of the system, test the system repair disc / Windows installation disc so that you know that you can start with something to be able to restore the image if Windows will not cooperate].

  2.3 open RegEdit [C:\Windows\regedit.exe] - I always open it by right-clicking and selecting run as administrator, but I don't think that it is essential for the special keys used in this task.

  2.4 I checked how to implement by accessing user ID

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  and clicking each entry in the list to see what number S-1-5-21-NNNNNNNNNNNN-100X is the name of the affected user.  The user name appears in the right-hand side of the RegEdit window you look at each entry.  The number of S-1-5-21-etc., it will be the X at the end between your user accounts.

  2.5, go to this entry [using the S-1-5-21-etc number you just found]

  HKEY_USERS\S-1-5-21-NNNNNNNNNNNN-100X\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

  2.6 checks if the value of the personal in the right side by double-clicking on the personal and changing that value to that of the new way you have implemented already.  [Staff means entry of user my documents ].

  2.7 checking the values of the other user folders that you moved.

  2.8.1 [Windows 7] while you're there, check IE, location of the downloads folder.  It is in the key

  {374DE290-123F-4565-9164-39C4925E467B} which is normally the second entry down just after {Default}.  This sets the folder you would normally define in IE, Tools, view downloads, Options.  I saw that the normal procedure fool you once, and there is no adverse consequence to set the correct value in the registry instead.

  2.8.2 [Windows 10] you must manually set this folder once for a corresponding registry entry must be created.  Thus, as a first step, set the folder in IE, Tools, view downloads, Options.  Subsequently, you will be able to check & to change the setting to Explorer\Main HKEY_USERS\S-1-5-21-2568008921-1580239441-348697478-1001\SOFTWARE\Microsoft\Internet with its default download directoryentry.

  2.9 you will also see a few lines up key

  HKEY_USERS\S-1-5-21-NNNNNNNNNNNN-100X\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell records

  and the corresponding entries in there match those in which you have worked in.  I mention the existence of the second series of entries just because you could see the and might get scared that something has gone wrong.  When I made this correction, I just couldn't get the second set until later so I have whatever it is worry.  You will notice that some entries exist in two of these areas, while others exist only in one of them.

  - - - - - - - - - - - - - - - - - - - - -

  3 while I saw some threads in this forum who allege that registry changes can achieve more than using the box location tab [i.e. more than my procedures in article 1 & 2 cover], I see no convincing evidence that it worked [and I saw at least a thread who said that subsequent attempts to run a repair installation wouldn't work - the system has just said that he could not. work with unexpected folder locations that he discovered].  I think that these discussions said that they had moved all of the user profile on the data disk, but I have no notes thereon as they seemed to me to be questionable procedures.

  - - - - - - - - - - - - - - - - - - - - -

  4 benefits of the relocation of the user folder

  The separation of your data files of your operating system & its applications is not just free up some space on the OS disk [normally C:\], it also allows to make images of system regular training of the BONE that are almost certainly going to be 40 GB or smaller [and only take 25 minutes to do].

  It would take you back to excellent capabilities as response to the corruption of the serious system could then be to boot from a system repair disc or a Windows 7 USB/DVD installation and restoration of this image, i.e. restore the system drive, exactly what was on it at the time that the image was made.  This restoration only takes about 25 minutes.

  I did a couple of years and would never set up my system any other way now.  I had previously considered images of the system as a tool of INFORMATION services used to avoid the difficulty of flaws correctly, but I was wrong.  Now, I make them regular system on external drives and can therefore get reliable disaster & quickly.  You can hunt with confidence the flaws or just to do experiments in knowing that you will be able to go back to square one, even if everything goes wrong.

  With separate system & datafile discs, you can continue to do backups of simple file of your own files on your disk data using Windows backup or another backup of file utility.

• After changing the asset level Internet hearts can be read more

  Hi, I changed the level of asset stings on the Internet through to advanced. Now, asset stings on the Internet connected on the game server, but keeps hanging on "additional players research." Maybe it does not find my level players. But annoying because I can't deliver the return level to intermediate or beginner to first display the game window. How can I reset the level (registry entry?)? Thanks in advance for the help.

  Hey Midas,.

  Find out what... Maybe this help you resolve your query:
  Asset stings on the Internet: how to play:
  http://Windows.Microsoft.com/en-in/Windows7/Internet-Spades-how-to-play

• Impossible to change the administrator password or log in to the administrator! (CF10)

  So as the title says, I can't connect to the administrator and change the password through Coldfusion10\cfusion\bin\passwordreset.bat doesn't seem to be actually change the password because I always get the "invalid username/password" when I try to log in after resetting the password.

  Further, I used the old method of changing neo - security.xml and changed 'admin.security.enabled' to false. This allowed me access to the administrator, but even in this case, when I activate the password protection and reset the password of the administrator, I am still unable to connect!

  A detail that may be a clue to solve this problem: when installing CF, it has been fixed to not use the default username "admin". When I try to open a session if I try with "admin" and the username is personalized with no luck.

  Any ideas on how to solve this problem? It seems that the password encryption system is broken and store the hash of password reset evil or something...

  EDIT: I forgot to mention that I have to restart the service after the reset of the password.

  Here are possible solutions, you can try: -.

  • Try another browser (problem occurs mainly with IE).
  • Try another address http://127.0.0.1:port_no/CFIDE/administrator/index.cfm or http://localhost:port_no/CFIDE/administrator/index.cfm or http://ip:port_no/CFIDE/administrator/index.cfm.
  • Try the passwordreset.bat, then try again with the same ip address or the IP loopbak.
  • Try a different server and remote access to the server http://ip:port No.
  • Select the port internal/built for ColdFusion and then try to http://localhost:8500/CFIDE/administrator/index.cfm, where the 8500 is the internal port to ColdFusion.

  Note:-a restart of the application server ColdFusion to allow port internal/built would be necessary.

  Here's a similar thread ColdFusion 11 fresh install Administrator Login does not there is place for ColdFusion 10 as well.

  Kind regards

  Anit Kumar