Change the partition where to downloads and automatic updates

Similar Questions

• Change the default file for downloads and some user folders locations

  A big thank you to all who have helped me, more recently DAXnnn and try * 3.  I come once more in need with questions.  For the cleaning of my boot partition before cloning to a smaller SSD, I'm getting cause folders USER My Documents, my music, my pictures, and my videos to be moved to a different physical disk drive.  I also want to do the same with the downloads.  After trying to use MKLINK (without success) and the location of the tab in the properties for folders (in vain), try * 3 put me on editing the registry.  While I did not yet any change, I followed his instructions to look under HKEY > CurrentUser > software > Microsoft > Windows > CurrentVersion > Explorer > Shell user folders and confirm watch registry.

  What I found is that the actions I took before running into problems using the options of localities had caused registry entries updated to show the new names of path of My Documents (under personal in the registry path) and my music.  This leaves downloads, my pictures, and my videos to be changed before the data transfer of the boot partition to reduce before cloning.  I discovered the writings of my pictures and my videos contain a variable %UserProfile% then the names of folders.  My assumption (often a wrong thing to do, I know) is that I can change these entries replacing %UserProfile% with the name of path, including the drive etc letter describing where I want to move the old data and write new data and changes.  IS THAT CORRECT?

  Regarding downloads, what I discovered is the second entry in HKEY > CurrentUser > software > Microsoft > Windows > CurrentVersion > Explorer > User Shell Folders, below (default) is a name {374DE290-123F-4565-9164-...}, displayed once indicating the value of % USERPROFILE%\Downloads.  Using my penchant for the skip logic, I assume that I can edit this article replace the value data with the path name where I want future writing downloads.  IS THAT CORRECT?

  If I can confirm or correct information, I am very close to stripping the size of my partition boot prefixed operation clone to place what's left on my SSD.

  Thanks to all for participating in such a large forum community!

  HR

  Yes you are right.  If you want that your download location for be moved, just change:

  Old: %userprofile%\downloads

  New: E:\OtherDrive\Some Windows\

  This will make all your downloads stored in the folder 'folder of some '.  Just be sure to include a folder name and make sure that this folder actually exists.  Make sure not to say a disc like E:\ or all your documents could get dumped at the top of this reader, rather than in a folder.

• How to change the partition under windows xp and corefoundation.dll

  I have a lot of memory on my computer, but not much on my c drive. How can I change? And how do I find corefoundation.dll car for free?

  Hi Claudia1994,

  I suggest you reinstall the latest version of iTunes and QuickTime, check if it helps.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows XP

  http://support.Apple.com/kb/ht1925

  For additional support post your query in the community forums of Apple.

  https://discussions.Apple.com/index.jspa

• Windows xp several errors - IE - internet explore is not replying to the questionnaire, - unable to download and install updates.

  * - Original title - windows xp - Update Manager day & installshield update managers - errors-

  Internet Explorer is not responding. don't know if I lost the piece of software because if I manually download an update or software, a msg of error appears stating, the installation cannot be performed.

  To avoid confusion and duplication of effort, please post a follow up later while responses to your previous thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-system/my-media-center-crashedcant-download-installalways/15a9db75-ab15-43d1-89fb-e6f2968a83d1 (August 6, 2012)

• I need to change the folder where download windows updates, I know there must be a way to do this.

  Could someone help me on this issue.

  I need to change the folder where download windows updates, I know there must be a way to do this.

  Updates Windows installation location cannot be changed. Windows updates tend to fix and replace the old files of the system, so it would normally replace a file in the System32 folder.

  If you want to free up disk space, see the following:

  • How to back up and restore your files manually
  • How to free up disk space in Windows

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

• Bootcamp (Win10) has not started after you changed the partition and updated at El Cap.

  I have a MacBook Pro (retina, 15 inches, end of 2013), 2 GHz Intel Core i7 with 8 GB of Ram.

  I had 2 system installed, Win 10 + Yosemite from the windows of beginning and the use of most of the time.

  Yesterday, I ran out of disk space and passed the partition in OS X with disk utility.

  While I changed the partition and I also upgraded to the El Cap.

  After all, I can't start by winning 10 more, although I could see my windows in the startup disk Control Panel.

  I checked some thread here and mess with command autour terminal, but nothing has worked for me.

  Here is the result of diskutil:

  Jerbins-MacBook-Pro: ~ the jerbinyuan list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 70.1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft data base BART 30.0 GB disk0s4

  5: Microsoft database HOMER 150,0 GB disk0s5

  Jerbins-MacBook-Pro: ~ list of cs jerbinyuan$ diskutil

  No logical volume group CoreStorage found

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 136992184 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  137401824 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  768 138671360

  138672128 58595328 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  197267456 292966400 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  490233856 863

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-136992184] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [137401824-1269536]

  4: 0 b 1023 254 63-1023 254 63 [138672128-58595328] Win95 FAT-32

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  00000000 2nd eb 58 90 42 53 44 20 20 34 34 00 02 20 20 00 | X.BSD 4.4...  .|

  00000010 02 00 00 00 00 00 00 20 00 f8 ff 00 00 f8 43 08 |... C. |

  18 00 00000020 7th e0 03 37 00 00 00 00 00 00 02 00 00 00 |... ~... 7..........|

  00000030 01 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |... |

  00000040 80 00 29 11 14 2f 2 a 42 41 52 54 20 20 20 20 20 |..) ... / * BART |

  00000050 20 20 46 41 54 33 32 20 20 20 31 c0 d0 bc 8F fa |  FAT32. 1... |

  00000060 00 7 c fb 8th d8 e8 00 00 83 19 bb 07 00 fc 5th c6 | | ......^.......|

  00000070 c0 ac 84 74 b4 06 0e cd 10 eb 30 cd 16 cd e4 f5 |... t... 0....|

  00000080 19 0D 0a 4th 6f 6F 2d 73 79 73 74 65 6 d 20 64 69 |... Nonsystem di |

  00000090 73 6B 0D 0 a 50 72 65 73 73 20 61 79 20 6 6 b 65 | SK... Press any ke |

  000000a 0 79 20 74 6f 20 72 65 62 6f 6f 74 0D 0 a 00 00 00 | is reboot... |

  000000b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |... |

  *

  000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |... U. |

  00000200

  Jerbins-MacBook-Pro: ~ jerbinyuan$ diskutil info/dev/disk0s5

  Identifier of the instrument: disk0s5

  Device node: / dev/disk0s5

  Set: No.

  Part of the whole: disk0

  Device / media name: BOOTCAMP

  Volume name: HOMER

  Gendarmerie: Yes

  Mount point: / Volumes/HOMER

  Personality of file system: NTFS

  Type (Bundle): ntfs

  Name (Visible to the user): Windows NT (NTFS) file system

  Partition type: Microsoft Basic Data

  Operating system can be installed: No.

  Media type: generic

  Protocol: PCI

  Smart: checked

  Volume UUID: 4EC75B8E-02A8-4B26-B7F3-5EA9D0A47FA9

  Disk / Partition UUID: 776C43C1-7E4C-4997-BDF5-A91FD406DEBD

  Total size: 150.0 GB (149998796800 Bytes) (exactly 292966400 512-Byte-units)

  Amount of free space: 18.5 GB (18479718400 Bytes) (exactly 36093200 512-Byte-units)

  Device block size: 512 bytes

  Allocation block size: 4096 bytes

  Support read-only: No.

  Volume read-only: Yes

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  Thanks for help.

  Please follow the steps described in [help] can not boot Windows (8.1) after partition resizing .

• WHERE to download and how to install windows 8 oem and register with the key from the BIOS

  My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS

  My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS

  See here, make sure you download the correct edition:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

• How to change the location where the scan of the computer updates the file?

  I would like to know how to change the location where the scan updates the file.

  HI ROT2,.

  It depends what printer and the software you use?

  Normally, you will find a 'save to file Option save' like the screenshot below.

  

• Why can't get a Blackboard web site file to download on my computer, when I try told me that the file cannot be downloaded and gives a box that asks to restart, or cancel

  Download file will not be

  Why can't get a Blackboard web site file to download on my computer, when I try told me that the file cannot be downloaded and gives a box that asks to restart, or cancel

  Hello

  1. what operating system is installed on your computer?

  2. which web browser you are using?

  3. you get any error message?

  4. are you able to download the file using any other computer?

  5. do this happen all sites or with any specific Web site?

  6. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps below.

  Step 1:

  a. click the Start button.

  b. in the start search box, type %temp% , and then on enter.

  c. delete all files in the Temp folder.

  Step 2:

  a. press the Windows key + R

  b. in the run, prefetch, type dialog box press ENTER.

  c. remove all files

  Method 2:

  If you are using Internet Explorer, try in no add-on mode.

  a. click the Start button.

  b. click on all programs.

  c. click on Accessories.

  d. click on System Tools.

  e. click on Internet Explorer (No Add-ons).

  Method 3:

  Optimize Internet Explorer from the link below.

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/936213/ro

• My "auto download and install updates" is no longer 'auto' installs the updates. Now it downloads, but without installation

  Automatically download and install updates is set, it is not just to do the job.  I have literally click on install now for EVERY single update. I tried to put different time make this hope that would be "straighten" out there but... Thank you Ed M.

  Hey Ed M.

  1. you receive an error message or error code?

  2. the problem occurs with the individual update installation?

  I suggest to follow the article mentioned below and check to see if that does the trick:

   

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  Hope this information helps. Let us know if you encounter problems under Windows in the future. We will be happy to help you.

• How to change the default path for documents and settings

  How to change the default path for documents and settings

  I try to change in the registry, but the profile can create but error! had no choice to change the default path % lecteur_systeme % d: /.

  Hello

  I suggest you to download TweakUI, this could help you or get you headed in the right direction
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP

  Also this KB could help as well:
  http://support.Microsoft.com/kb/236621

  It will be useful.

• Is the corrupted Windows 10 download, and if so how can I remove this and re-download the file?

  Original title: upgrade Windows 10

  I have a Dell Studio 1749 under Windows 7 Home Premium.   I postponed the upgrade of Windows 10 to the present day.  The update file appears in the control panel Windows Update Panel, but when I click start it restarts Windows 7 simply and tells me that the new updates have been installed but it was Windows 7 updates since yesterday.

  Is the corrupted Windows 10 download, and if so how can I remove this and re-download the file?    Or maybe another solution?

  Thank you.

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Change the default ports for http and https

  Hello

  I'm trying to change the default ports for http and https

  I have a 506th PIX (which does NOT of NAT)

  I have the following: -.

  static (inside, outside) tcp 192.168.10.2 601 192.168.10.2 http netmask 255.255.255.255 0 0

  static (inside, outside) tcp 192.168.10.2 602 192.168.10.2 443 netmask 255.255.255.255 0 0

  access-list acl permit tcp any 192.168.10.2 eq 601

  access-list acl permit tcp any 192.168.10.2 eq 602

  Access-group acl in interface outside

  where 601 and 602 are the http port and https to be redirect to respectively.

  I changed the webserver accordingly

  I get the error message

  "No group of translation not found for tcp src outside:189.x.x.x/50232 dst inside:192.x.x.x/80" (trying to access port 80)

  "I also have ' fixup protocol http 601.

  I had access to the internal and external web server before attempting to change the default ports

  Any ideas where I'm wrong?

  See you soon.

  I apologise for not thinking correctly.

  the static method must be:

  static (inside, outside) tcp 192.168.10.2 80 192.168.10.2 601 netmask 255.255.255.255 0 0

  static (inside, outside) 192.168.10.2 tcp 443 192.168.10.2 602 netmask 255.255.255.255 0 0

• CS6 on a pc.  Cannot change the resolution on photo downloaded from my Android phone.  What should do?

  CS6 on a pc.  Cannot change the resolution on photo downloaded from my Android phone.  What should do?

  You should find the forum for any product it is and post your questions there.

  Here is a link to a page that provides links to all of the Adobe forums...

  The Forum links page: https://forums.adobe.com/welcome