change the sequence of boot HP 23-f250

Similar Questions

• Changing the sequence of Boot in Thinkpad 600

  Hello everyone.

  I have a TP 600 and my hard drive crashed while I had to get a new one. Now I am trying to install the OS on it, but when I try to change the BIOS boot sequence, (by pressing F1 on startup and then clicking on Start Up option), I am unable to change the boot sequence.

  I see that HDD is allocated to the first sequence and I can see other options like CDROM etc, and when I try to select the CDROM option, it does not replace the HDD with CDROM as the first sequence.

  How can I go about it? I did the research for almost 2 days with no luck!

  Thanks in anticipation,

  Alex

  Sorry, yes I meant the flag.

  You use the TrackPoint and it of buttons or use the Tab key to select the item, and the space bar to select.

  use tab until what it says "Reset" and then press the space bar, this will clear the fields. You can then use the tab to select the disks and use the space key to enter in the list.

  I hope this helps.

  Edit: misspelling

• How to change the sequence of the BIOS?

  Hello...

  I made a bootable CD... using Seagate Disc Wizard... latest version... my computer does not start from the CD/DVD drive via the USB port of a Seagate 1 TB HDrive.

  I have a new HP Pavilion Slimline desktop PC... 400 224

  How can we change the sequence?

  I was not in the BIOS from a few computers in return... I don't remember how I found it... Obviously, it was easy with the Compaq I had at the time.

  Now, with this Windows 8 (8.1) I can't find anything yet... always moving in from previous HP Pavilion...

  It would be well if HP does not assume or Microsoft assume what is desired by the owner about the 3rd - party backups or the CD/DVD drive boot options are not desired by the new owner. I'm not aware the inner workings computer that well. And I like the way the workings and the protections I used with the old computer. Apparently, I'm not one of those people who likes the change. Confusing times.

  I would appreciate help with this... I'm still on warrante since have approximately a month.

  With great satisfaction... truly... jazzman

  Hi, scratching,

  In all HP computers, there is the start menu, you can go to the startup by pressing the Esc key several times. Herer, you can go to the BIOS boot order and other diagnostic tools.

  I've linked to a document relating to the boot for you order.

  Hope this helps you

  http://h10010.www1.HP.com/ewfrf/wc/document?CC=DK&LC=da&DLC=da&DocName=c01443326

  Please let me know how it works.

• How can I change the sequence of displayed in Thunderbird mail accounts?

  I need to set up a laptop computer to take on the go. How can I change the sequence (list) of e-mail accounts in the vertical pane to match my office?

  Install this add-on.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/manually-sort-folders/

• How to change the sequence of films in iMovie Theater

  By exporting iMovie projects in iMovie Theater, the sequence of films is determined by the time of download. How to change the sequence of films in iMovie Theater list?

  HI, breeaz,

  I have not found a way to change the sequence of films shown in the movie screen.

  If you access your movies in the Finder folder, then Ctrl-click on the folder of the theatre, you will find your movies to the poster

  in the alphabetical order in archival records.   I was not able to manually rearrange it.   They can be rearranged in some categories, through the view menu item at the top of the screen and the changes applied to the entire window, but it was not carrying at the display of iMovie.  In General, I'd like to make changes to the structure of iMovie in the finder.  It can cause serious problems.

  Best,

  Rich

• How can I change the sequence exported to iMovie?

  When I finished making the video and it has exported, some errors found only. How can I change the sequence exported in the application iMovie editing new, mainly texts?

  Just open the project that you exported from iMovie, make the changes necessary, then export again.  (Sod / Murphy's law always ensures that errors found only after export)

  Geoff.

• Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  I bought on ebay and the seller sold me a dubious version of xp so I want to format and install my own at the start he said:

  The Intel Boot Agent GE v1.2.31 initialization
  KE - E05: the LAN adapter's configuration is corrupted or has not been initialized. Boot agent cannot continue

  Hello

  The message looks like you tried to boot and install Windows LAN

  If you want to change the boot order, I recommend pressing the F12 key, immediately after that the laptop was turned on!

  A new start menu should appear, then you can choose the reader of CD/DVD (ODD) and a boot device.

  Also by pressing the C button should allow you to boot from the CD inserted, bootable.

  Welcome them

• ThinkPad Tablet 2 BIOS: I can't change the list of boot devices. Help, please!

  Hello community,

  I need to restore Windows on my ThinkPad Tablet 2 via USB. But I can't change the list of boot devices in BIOS. The F12 option is not available. It is said: "F12 key is used to call a pop-up the boot devices list. This option is available only when supervisor enters setup. »

  What can I do?

  Kind regards

  The problem is solved!

• I restart the computer and changed the BIOs to boot from the CD. So as usual, I'm prompted to press any key to start from the CD or DVD.

  Hello Comunity Microsoft :D My name is Mike and I built a gaming pc. Everything was going well for the first 3 days, but now I have a few crashes very violent. Speakers in loop and buzz and screen lock. I have to completely shut down to go back to a working state. I did everything I could possibly think of to solve this problem, but I can't.

  Then. on the problem. Today, I decided that I was able to solve all the problems by reinstalling windows. I had my keys together and put the disc in. I restart the computer and changed the BIOs to boot from the CD. So as usual, I'm prompted to press any key to start from the CD or DVD. I do and I get normal loading windows files, and at the end of this road, I get the Welcome screen in windows7 with no option and a fat slider. I don't have the little box that tells me that I can fix my computer or reinstall windows, NOTHING. I tried several times and received the same result<--(Insanity: root="" meaning...="" just="" saying)="" so="" i="" called="" windows,="" or="" had="" windows="" call="" me="" rather,="" and="" the="" tech="" says="" she's="" never="" heard="" of="" such="" a="" thing="" happening,="" and="" walked="" me="" through="" all="" these="" steps="" that="" i="" have="" already="" tried....="" still="" no="" help.="" so="" i="" am="" asking="" the="" community.="" has="" this="" ever="" happened="" to="" you="" and="" how="" did="" you="" make="" it="" work.="" and="" please="" don't="" post="" a="" list="" of="" regurgitated="" back="" log="" fix="" lists.="" rest="" assured="" i="" have="" already="" done="" it="" and="" failed="" to="" receive="" a="" different="">

  Just to isolate the problem, try to download a new copy of Windows 7, and then try again:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Regarding problems with the computer itself, try to disconnect all nonessential equipment attached to it to see if the problem persists.

  I would also try switching around components such as modules of memory to see if the problem persists.

  I would also check to make sure that all components are mounted and installed correctly.

• How can I change the sequence of pictures in the picture library

  It helps to have a button MOVE HERE

  When I went to change the sequence of photos to create a slide show...
  cannot find or change anything.
  Help

  Will not to happen outside of rename photos,.

  Windows live photo gallery offers the possibility to rearrange your photos just for a slide show.

  Open wlpg, find the folder or photos in several different folders, searching all the photos and videos from search on the search up option on top of the left column and begin to look at the little boxes that appear when you hover over the pictures,

  When you have selected all the photos, click on (create a tab, then movie) or if offered slideshow, then all photos of will open it in a review of dialog box and slide it in the direction you want, click the next button when your done and follow the rest of the customization options.

• Changing the sequence of thumb in the Collections?

  Hello

  I created smart Collections inside the sets of the Collection through keywords, and then I tried to change the sequence of these inches in the order viewing good.

  But the system will not allow it.

  So, what are my options for a group of pictures of various records in one place, in the desired sequence?

  Thank you very much

  Raphael

  PS Ce that means: tag your content to make it easier to find? How I tagged content?

  Open the 'Smart' Collection of images,

  Select all [CTRL + A]

  Create a standard collection [+]

  Change the sort order in the toolbar, or drag and drop to a sort of "Custom".

  'Tag' in my opinion, is another term for "Keyword". When you the keyword of the images he puts a 'Tag' icon on this thumbnail preview.

  

• How can I change the sequence of photos in slide shows (especially full frame)?

  I am a beginner of the use of muse.  I don't know how I can change the sequence of photos in slideshows?

  2 ways:

  1. display temporarily thumbnails and drag them to the right place.

  2. open the layers panel, activate the slide show, click on the magnifying glass at the bottom of the layers panel to locate the slideshow widget. Drag the photo entries in the place you want.

• How to change the sequence?

  Hello gurus,
  
  I have a sequence like this
  

  CREATE SEQUENCE  seq_idea
    START WITH 6
    MAXVALUE 9999999999
    MINVALUE 1
    NOCYCLE
    NOCACHE
    NOORDER;

  I want to change the start with 100, can someone tell me how to change the sequence
  
  
  
  Kind regards
  friend

  glory wrote:
  Hello
  You cannot change a sequence created with the value start.
  Better, you drop the sequecne and recreate the sequence with what you want.

  Regads,
  Fame

  See this link
  http://docs.Oracle.com/CD/B28359_01/server.111/b28310/views002.htm#i1006623

  FYI :)

• Slide show - how to change the sequence of images

  How to change the sequence of images in the slide show.

  I'm trying to highlight in the film strip, and I can drag.  But, when I try to place it somewhere else, it comes in the original location.

  What I am doing wrong?

  Yu can not change the order of the images in the slideshow module.

  To change the order, go to the library module (must be seen grid), enter the part of the image of the thumbnail and drag if it is a new position in the sequence. Switch to the slide show module when all the pictures are in the order of preference, and then create a Collection of slide show. The order and the setting is stored in the collection.

• CHANGE the SEQUENCE on a busy server translates into very high unexpected values

  Our sequence was 782,393,232, or so, when I came it up through 30 000. Here are the commands I used:
  
  change the sequence of OUR_SEQ increment in 30000;
  Select double OUR_SEQ.nextval;
  change the sequence of OUR_SEQ increment in 1;
  commit;
  
  When I questioned nextval in the sequence, a few minutes later, he had climbed up to more 8 billion! I have reset quickly up to 783 million or more, and it behaved correctly after that. I saw some posts on the net that infer that the reset sequence is heavily used can cause "unpredictable." Everyone knows this or y at - it a bug known?
  
  I am running:
  
  Oracle Database 10 g Enterprise Edition Release 10.2.0.4.0 - 64 bit, RAC system.
  PL/SQL Release 10.2.0.4.0 - Production
  "CORE 10.2.0.4.0 Production."
  AMT for Linux: release 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production

  Sven,

  I'm not sure I understand what you're clarifying...

  In a CCR cluster, a sequence with a cache has a separate cache in each node of the cluster. If the cache has been set to 20 (the default), and the increase was set to 30,000, each node is hiding 20 values separated by 30 000. And caches would be overlapping (i.e. node A would get 20 values of 1-570 001, node B would get 20 600 001-1 170 001 values). I don't see that this is in contradiction with what I posted.

  Obviously, the presence of a cache creates a bit of a ride with when, exactly, you say that a sequence is incremented. The NEXT_VALUE in DBA_SEQUENCES is incremented by cache * interval when any node exhausts its cache. The NEXTVAL of a sequence for connections that hit a particular node will increase by interval every time another session gets the NEXTVAL of a sequence. The NEXTVAL of a sequence for connections on a different node is not affected by what is happening on the current node. What enlightenment do you? If so, I agree.

  user11300030,

  Discussion on the sequence of caching can provide insight into why none of the lines are between 780 million and 1 billion. It is quite possible that these values have been cached on one node other than the node where the pads were executed. Had caches was flushed not when change you the sequence, inserts run on these other nodes could have used this range values.

  Justin