Disabling sound in windows update

Similar Questions

• No sound after Windows updates - don't Please Help!

  I just finished a full restore my system back to factory settings because I had no noise whatsoever.  After doing this, I had sound for a while, until some update has been installed and now I have not YET healthy.  It's extremely frustrating!  Given that the sound worked until one of the many updates has been installed, this leads me to believe that the update is the cause of the problem.  When I click on the sound tab, it shows that everything is working ok.  I tried everything I can think of to remedy to this problem.  I uninstalled, reinstalled and updated the driver for the sound.  It does not work.  I tried to use the restoration of the system to an earlier time and that doesn't work anymore (because there was not a lot of restore points because I had to complete my system restore.)  I don't know what to do to solve this problem.  I'd do another complete restore of my system, but I'm afraid that the updates will cause the same issue.  I'd appreciate any help!

  Looks like you already tried everything, but the following items may be worth a visit:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (valid for XP - Vista - 7)

  Solving audio problems in Windows Vista
  http://www.ehow.com/how-does_4966770_troubleshooting-sound-problems-Windows-Vista.html

• No Logitech G35 headset sound after Windows updates

  Original title: last updated

  Twenty minutes earlier on 11/08/2011 my self out of the windows updated. After the update has been installed and restarted my computer, my logitech g35 headset is not working properly. If I turn them off in the control panel and reactivate as default device, I get 1-3 seconds of the sound before they be cut again. So two questions. 1 What is this happened to someone else. 2. how to fix it.

  Hi Hexter23,

  1. what application you are trying to use the headset?

  2 update did you recently installed on the system?

  3. are you able to hear the music / sound through normal speakers?

  Method 1:

  You can consult the following link and run the troubleshooter of audio playback, if it helps.

  Tips for solving common audio problems

  Method 2:

  If the previous step fails, then manually, download and install the latest audio drivers for the card its installed on the computer by visiting the sound card manufacturer or computer manufacturer's website and check if that helps.

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• No sound after Windows update

  Automatically updating Windows and now I have no sound. If I play something about winamp output volume meter shows that it plays but no sound, I checked the speaker system on another computer and it is also ok. It seems that a few other people have the same problem.

  Hello

  There are 2 ways to solve this problem:

  Go to your computer, or your sound card, the manufacturer Web site > looking for drivers and downloads Section > put in your computer or sound card (if you installed it yourself) model number > find your operating system > download and install drivers etc you will find Audio.

  __________________________________________

  Microsoft gives sometimes you updates for the 3rd party hardware: Audio, graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• spectrum 360: no sound after windows update

  Hello

  As a result of an update to windows 10 for the anniversary edition, I had problems with the sound.

  It says the audio device not detected.  I uninstalled the audio drivers and reinstalled them and it will work, but after restarting the computer, it gives the same error.  Sometimes a reboot it will work again, otherwise have to reinstall again.

  I couldn't run constantly, so I restored windows on the previous generation and it works well again.

  Anyone had this problem or could fix?

  Thank you

  Thank you.

  I ended up doing something like that.  I uninstalled the program conexant himself and installed an older driver (9.0.57.0), and so far it has worked.  I got the driver from the hp support page.

  The new driver worked until a reboot, then had to be reinstalled again.

  I thank once again.

• Tecra 9100 - loss of sound after Windows Update.

  I just got my hands on a 9100 second hand and have been re - install XP Pro. I was going well and had everything except the card SD not working after downloading all the drivers concerned off Toshiba site.

  Micorsofts update the site decided to download new drivers for the card his Yamaha, and now it says NO device.

  I reinstalled the drivers from the toshiba site, but despite everything I do, it still shows no device.

  Ive tried reinstalling the software Synth as well, but having said that I need to run the re-installation of synth program. But there is no directory on the drive for what Yamaha and no entry in the Add/Remove for yamaha synth window or in the start menu.

  I'm at a loss where to go then, short from once again and re-installing the OS to the top, and it's a good day's work.

  Is a cleanup utility exists then I can just redo the part of sound card?

  Help please. :-(

  Hello

  It seems that there is a problem with his Yamaha card driver after the installation of the Microsoft Windows XP SP2.

  Seems that you need to update the audio driver of Yamaha!

  After a short investigation, I found this site:

  [Do not install SP2 if you have a card his Yamaha AC - XG | http://www.housing.hawaii.edu/resources/support/yamahaac-xg.htm]

  Best regards

• NO SOUND AFTER WINDOWS UPDATE 8

  Hello

  Please help me, lost after installing important updates for Windows Mobile 8, all audio sounds. I don't know what happened. Bearly need an audio. Thanks in advance.

  Hello

  Try the following.

  Download the installer from IDT Audio relevant on the link below and save it in your downloads folder.

  IDT HD Audio Installer - Windows 8.1

  IDT HD Audio Installer - Windows 8

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When done, shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Disconnect the power adapter and remove the battery.  Press and hold the power button for 20 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click "Speakers/HP" once to highlight and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• How can I disable the Explorer Window update checking?

  How can I disable Windows Explorer check the updated AWR feature?

  Whenever I open an instance of AWR, Internet Explorer opens and search for build number.

  Thank you

  
  

• Have no sound after Windows update in Windows Vista.

  I have windows vista and just did an update, now I have no sound...  I have a Toshiba laptop.  I tried to do a restore point for two different days, but it keeps giving me an error.  I have no sound, so now what?

  Try to download and run this troubleshooting:

  Diagnose and automatically repair audio playback problems

  http://support.Microsoft.com/mats/AudioPlayback/

• Windows Update freezes

  Hey guys,.
  So I recently had a problem with XP Pro SP3 computer that works perfectly well in the normal tasks such as word processing, navigation, media, etc. I went to troubleshoot a Windows Update that I recently tried to install failed and Internet Explorer stops responding and freezes. So, here's exactly step by step what I do which creates this problem:

  (1) open upgrade from Windows (Internet Explorer then opens upwards)
  (2) Windows update site launches, but then a pop up asking to install something Microsoft is
  (3) I click on install
  (4) Internet Explorer freezes

  Every time I open just Windows Update and let is sit here, it freezes within 30 seconds. Whenever I click on do not install, it freezes. The only way to get it is to stop the process. Norton Internet Security is installed, but I created a rule to allow the updates of Windows Installer and I recently installed updates (11/15/09) last Sunday and they have installed successfully, except one which was what I tried to solve the problems.

  I already tried to re-registration of the Windows Update files, but also re-download of Windows Update and it still freezes. I am also able to navigate Internet Explorer perfectly on other sites with the exception of the Windows Update site. I ran scans and no viruses or malware were detected. The system is very healthy. Something to note is that the computer is on a domain. Please, if anyone out there has any ideas on what could be causing these constant freezes, let me know. Thank you.

  After a reset of Internet Explorer, the Windows Update site would still freeze. So what I had to do was to go to manage add-ons in Internet Explorer or disabled toolbar Norton Confidential installed Norton Internet Security was installed on the computer. After you disable the toolbar, Windows Update site showed correctly with all of the updates I needed and properly installed. It's amazing how Norton Internet Security control is same with simple and legitimate services that are necessary for your system. This is the exact reason that I do not run full software suite like NIS. Thank you for your help. Problem solved.

• sound card does not work correctly after Windows update

  My sound card has been disabled when I install an automatic update for windows. There was an extra audio driver in Device Manager 'bluetooth AV audio' and audio peripheral anoither like this. After installation there is no sound coming out if my sound card was on the list of Device Manager. I followed several steps through windows help and support to solve the problem since seeing him on my laptop for mute also did not work. After you resolve the problem with the use of MICROSOFT FIX IT, it was fixed but this isn't the same quality that I get. Its volume is less eventhough volume: 100. The sound card that was originally installed on my laptop is "Conexant High definition SmartAudio HD2. Is there something more I need to do in order for me to get the same quality of sounds I have before installation?

  Moreover, the light of my keyboard for caps lock shift and scrolling also failed after installation. I reformat my laptop after the incident, so I can get a good in the new system, but it does not solve the problem.

  I also need to update my sound card for my HP laptop? Please help me.

  Thank you!

  Hello

  1. what windows update that you install?

  I would ask you to try using a different set of drivers to verify. For more information, see the articles below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Conexant support:
  http://www.Conexant.com/support/

  I hope this helps.

• No sound in browsers after a windows update

  OK, this is the second time that this has happened. While I was asleep Windows Update and now I have no less sound my browsers. I fixed it the first time by running a system restore, but I don't want to have to restore the system whenever windows updates. I am running Vista on a HP Pavilion (DV6 I think) I know that this has nothing to do with browsers, since it happened twice after a windows update.

  In addition, all is well in the mng device. and I can hear in media player.

  Hi ty f.

  ·         Are you referring to Internet browsers?

  ·         What browsers are installed on your computer?

  For Internet Explorer, you can consult the following suggestions.

  Method 1: Check if the sounds are disabled for the browser.

  a. open Internet Explorer. Go to Tools , then Internet Options.

  b. open the Advanced tab.

  c. scroll down to the multimedia section.

  d. make sure the box next to play sounds in web pages . Click on 'ok '. Restart Internet Explorer. A test to see if the sound will now play.

  Method 2: Reset the Internet Explorer settings. See step 2 of the following article.

  Internet Explorer is slow? 5 things to try - help & how-to - Microsoft Windows

• Optional features of Windows cannot be enabled or disabled, hidden Windows updates cannot be uninstalled

  (!) Refer to this post: Windows Media Player enabled at startup interferes with sound, video, and other sources

  Obviously the Vista Home Basic SP-2 (optional) Windows features is more damaged than expected? None of these options has tried several times using different techniques can be enabled or disabled. I also had similar problems with uninstall some windows (and hidden) updates so I can reinstall them (including Service Pack 2: Windows6. 0-KB948465 - X 86) and 'can' be related.

  After the attempt to turn an optional feature on or off (to speed up Vista, is not necessary, or is necessary), in this case: "an error has occurred, not all features have been changed successfully." And it takes an unusually long time before it fails too? If I try to uninstall a Windows or hidden, in this case update: "an error has occurred. Not all updates have been correctly uninstalled"; but others were like "Silverlight" etc. If I try to reinstall Vista 5 languages SP-2 KB948465 Installer, I get: "the requested operation failed. A system restart is needed to roll back changes"ERROR_FAIL_REBOOT_REQUIRED (80070bc9).

  Even Windows updates failed to install Powershell 2.0, WinMF 2.0, and BITS 4.0 (read the post via the link above for more information). And if I do various attempts to troubleshoot and resolve these issues (and so on), the Blue error screen occurs finally.

  Other misc registry errors found; but were obsolete or left behind from the previous uninstall (not critical). Even in SafeMode with networking, all bet three errors have occurred (with startups and the services that are disabled; Microsoft services were 'hidden').

  The link in the installation of Service Pack 2 window (for more information on this specific error) goes to a Microsoft Support web page that explains this problem exactly as regards to SP - 2 mainly; Article: http://support.microsoft.com/kb/947366. But none of the solutions work or are applicable, since the system restore could not go back enough and I have not a Vista Home Basic CD (it is a second hand laptop that I will eventually replace it with another that has Windows 7, etc.). More Vista Service Pack 1 is already 'not supported' and SP-2 will soon follow. There is therefore no need to buy a CD to launch the "startup repair tool" (via another case).

  * Ironically the laptop works well overall, but some programs such as TVCenter6 are not able to function normally (DirectX. Net3 etc work fine) and require some resources that do not work due to the above problems. I can get on the internet using Internet Explorer 9 very well also (although Silverlight and Powershell etc. are required for certain functions to display or work).

  Please advise, Chris.

  Updated, I have invested in PC Health Advisor to 'fix' the registry problems; I was not able to manually set Windows features, specifically. When the computer reboots, I ran Windows Update and it worked again! Such that it auto-updated dot- Net Frame 3.5 Service Pack 1 (made in first), Powershell 2, WinRM 2.0, and BITS 4.0 etc.. I was so happy that I reinstalled Silverlight to Explore maps of Bing etc and tried again the functionality of Windows; no avail.? And he discovered damaged the account administrator; including commissioning elements "right-click" menu etc. (reinstall Vista SP2 manually failed too; almost from the beginning).

  To restore, I implemented a new admin account, renamed the one damaged, disconnected, connected to the new one, tested and deleted the renamed account; It worked! To retry the Windows features, the Admin account was again damaged. so I repeated these steps to restore Vista and had to address admin custom etc all over again just through (what is called "Aero" is enabled, but did not prevent the performance. Aero does not officially come with Vista Home Basic but gets 'active' to upgrade to Internet Explorer 9!).

  But in no way does this solve the problem base with features of Windows? I am amazed at how fast and responsive H.B. Vista Service Pack 2 is overall using less system resources; Despite this heart problem? And took a snapshot of what Windows Update installed completely. Fixed given by the support of third parties as a result of PC Health Advisor of the PC maintenance utilities (made by ParetoLogic I recommend instead if this ), has no also. And was not different from what I had already exhausted; stretching on the days. What I can possibly be "gone" which is at the root of the problem "of the Windows features" (as an option)?

  Update: I restarted PC Health Advisor several times: found and fixed more various defects of registry; found five obsolescent hardware device drivers (downloaded and installed updates for modem integrated, Realtek sound, "Value Added package" mass USB, Atheros wireless (WiFi); due storage manually remove the registry key for Toshiba VAP not in Control Panel?; restarted the laptop, did the account Admin is again ruined?) (in the same way; but not "Windows features" this time) And has been replaced with 'test' admin account for now. Revived the PCHA once again, found several flaws of registry; restarted; revived the PCHA (lack of only 1 minor registry this time and fixed), everything tested OK. Hard drive defragmented PCHA, put in place a third replacement admin account while remaining connected to test admin (deactivation and reactivation recent items starting reset not his "right click" menu). Running of new PCHA carefully before logging in a third new account Admin (health high, not mistakes; was then low mid level), connected off test, connected to the third replacement Admin account; realized that Windows Process Activation Service is not included in Vista Home Basic (SP-2). Windows Installer module did not work and can not be started; then I opened the Manager of tasks in administrator mode and managed to do the work. I downloaded the Vista CD torrent; but it requires a blank CD for this (and so on).

  Nothing has worked? The only solution found online so far is to reinstall Vista Home Basic Service Pack 2 edition, which is not possible (for the reasons). There must be a way to run a downloadable and OS utility repair record; When I discovered Reimage (point com) I peut buy as a last resort. If it does not reach the root of the problem and fix it, or if the Microsoft technical support cannot? I have no recourse but to buy another laptop (with OEM Windows 7 preinstalled; which is cheaper on this Toshiba Satellite A135-S2276 level).

  If I find anything else I will update this post (still pending from Microsoft to answer this question and other positions).

  Here are the latest steps taken to solve this problem that many there have also, as follows:

  (!) If you want to try this yourself, omit all deletes registry keys tried except «VistaSP2...» (for a total of 5 to 7 keys).

  (*) I kept those strictly for FYI purposes, while one who is also having this problem may avoid in go through what I had.

  (*) If I had known 'VistaSP2-... (KB948465) "is the correct name for the key (s) Service Pack 2, I could avoid all others.

  A ran the other (3rd party) utilities and other tasks, admin account is damaged is no longer; but root question remains?

  Tried to install standalone 5 new SP-2 languages. but not with the same "error in registry" repeatedly?

  Removed 50 updates beginning with the top of the list of MSW that Vista is back (all), because of the error in config.

  About 9 keys starting at the bottom this time and worked until I got to this key, that I could not remove the abduction:

  Update for Windows KB949939 did not have an uninstall option and may not be removed in high regedit.

  Changed permisions them key to 'force' a delete (changed owner, granted full control to the 'administrators').

  Removed other keys at the bottom of the install MSW list but standalone SP2 has not yet (in the same way).

  Found another potentially corrupt key with no. Uninstall KB938371. a 100 + instances of it and were withdrawn.

  Find more cases of this key (/ multilingual country) and changed "permissions" to remove all.

  A ran a search of all keys to make sure that all were completely removed from all categories; in the record high.

  Continued with the uninstallation of updates of DSM of the last upward; revived after all the few (which prompted the it).

  But still, the standalone Vista SP2 installer has failed in exactly in the same way? (following the removal of updates).

  Found and removed three updates DSM more with no uninstall option: KB937287, KB955430, Windows Search (4.0).

  The second key was part of the first? Removed a little past these, restarted, SP-2 (run as Admin) has always failed.

  High Ran regedit in mode 'permissions' to delete the keys to potential RETICLE; Search 4 uninstall appears!

  Deleted 4 research and restarted Installer but SP - 2 has not yet? Uninstalled four updates more in the list.

  The following entry is Service Pack for Microsoft Windows (KB948465), but he is damaged and cannot be uninstalled?

  This must be the problem, given that some of the deleted key had to do with "iCBS; has run high regedit.

  Used exactly the same procedure to manually remove the keys to Vista SP2 with care; but there were too many entries!

  Revisiting previous research, I realized that these keys starting with "VistaSP2 -" can be deleted. It worked!

  Service Pack for Microsoft Windows (KB948465) was finally removed from the list of updates installed after discount!

  Removal of two more MSw update to make sure it not more corrupt Scriptures; the Service Pack 2 Setup program has gotten away.

  But it suddenly abandoned shortly after the file copy process has started with the same error of registry; restarted.

  It worked! Everything was great when a system error suddenly interrupted the installation but 0x80070bc9 error has disappeared!

  The Setup dialog window prompted "0x800f081f' with more information on the Microsoft web site.

  Again running the preparation tool for the system Vista (Home Basic SP-2) update to fix "missing component CBS.

  Run the Vista SP2 installation program again, process installs other Microsoft Updates; but everything stops in the same middle point?

  Reran the tool again, rebooted, re-run Setup of Service Pack 2, same event occurs: error system 0x800f081f.

  CheckSUR log file lists 10 (f) CBS Watchlist missing package and 441 (f) CSI lack of deployment total key.

  According to the research done on this error, the only 'solution' again is to reinstall Vista Home Basic SP - 2 ed?

  And the two service items Microsoft Office Service Pack 2 Setup, I had already tried with the initial error.

  The irony is that the laptop works better than ever, but specific programs such as TVCenter6 will not work?

  Made of in-depth research on the error "0x800f081f" etc. (occurs with SP1 install also FYI); run the tool again.

  Remains found components for Vista SP1 not in the list of updates installed therefore some errors checkDUR.

  Used the same technique above to remove "VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000; iCBS but left.

  Again running PC Health Advisor, this time in high fashion, analyzed twice, found 14 registry errors and fix them.

  Who finally authorized the second error to install SP - 2. ("0x800f081f"); but still, Vista SP-2 does not go to reinstall?

  A run PC Health Advisor; found No registry errors either. If the Admin account is stilldamaged .

  I'll keep this account as it is until what I hope to be the final solution be found; and implement a new Admin then.

  Curiously, now it almost immediately invites "SP1 must be installed first" and is a sine qua non for SP - 2.

  As with Service Pack 2, SP 5 languages-1 has been downloaded; SP - x causes complete multilingual features to win at "overpoll".

  Service Pack 1 abandoned installation (already installed); ran high regedit and delete all sets of keys KB936330 (about 50).

  SP - 1 still wouldn't reinstall; used high regedit to remove the many KB936330 key sets and subs as possible.

  But Vista SP - x abandoned always with the same alert. only to discover 'integrated Service Pack 1 cannot be uninstalled?'

  Never after deletion so mamy keys manually, SP-2 (and SP1) was still as installed; in the box of Winver.

  After keys deleting both remaining SP - x, I realized it was unnecessary; and others deleted inadvertently.

  All this could not uninstall Vista Service Pack 2 (SP-1) to be (re-) installed to fix the underlying problem.

  After reviewing tried everything so far to see what can be done; I ran the uninstall of the elevated command line.

  But the result is the same; the prompt returned in a few minutes, but SP - x via GUI can take more than an hour?

  Conclusion: after finally getting the method calls BACK to (re) - install Service Pack 1 to work, it failed at the end!

  "Mode and on the process in an automated"undo"install", records were destroyed during the restart.

  Apparently, this version of Vista Home Basic was integrated (installable)? SP-1 and requires the CD (OS)!

  If I had known this all along, I would have improved (at least) to Ultimate. Which is exactly what the person I gave

  the laptop used far have done without any problem (less a video cable that fell off under the keyboard).

  How Microsoft can come up with such a version (SP - x) for (laptops), this are not equipped with CD?

  Because without it, there is no way to fix problems like this an 'off' (via Windows Upgrade also) internet.

  This case is classified as insoluble with regard to the original question.

  Hello

  wrong forum

  It comes to the installation of vista operating system instance

  try to repair:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

  or windows update:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• How to disable windows update auto update the driver for that particular device

  I have a MacBook air (13 inch, mid-2012)
  I had already used a thing of Apple called "bootcamp" to partition the hard drive. Boot camp also allows you to assign which os is used with starting the computer.

  Win 8 has been installed using an iso of Windows 8 and Microsoft Windows 7 USB DVD Tool to create a bootable USB key.
  That all worked. but there is no drivers as one might expect. If the video was VGA and there was no sound, etc.
  I downloaded a zip file containing all the drivers and an installer or install the program from apple.
  BootCamp5.0.5033.zip
  I ran the installer and everything was installed and worked. He couldn't believe my luck. I've now had about pain free installed win 8.

  But a frustrating problem has developed.

  Every day or so my external screen connected by a mini display port adapter stops working. I restore the
  pilot and it starts to work. So I guess that put automatic catch up and install a new driver. It does not work, I do this back and the cycle repeats. But... why...

  I see all over the internet means to stop windows auto update all together, but this isn't what I want.

  That is the question:
  Can someone help me to tell windows update doesn't auto not only the video driver?

  Here is some info in case it would be useful to you gurus
  This driver works:
  Graphics card Intel (r) HD 4000 (Microsoft Corporation - WDDM 1.2)
  Driver provider: Intel Corporation
  Driver date: 26/05/2012
  Driver version: 9.17.10. 2768
  Digital signer: Microsoft Windows

  This driver does NOT work:
  GPU Intel(r) HD 4000
  Driver provider: Intel Corporation
  Driver date: 12/12/2012
  Driver version: 9.17.10. 2932
  Digital signer: Microsoft Windows Hardware Compatibility Publisher
  Device Manager > display... > events tab

  A waste of time this as frustrating. Now how to force it to never automatically updated only the video driver.

  Hello

  You can not disable the automatic update to a specific device.

  However, you can take control and disable the AutoUpdate for all hardware devices, which is the best option.

  Press the Windows key + X to display the System menu , and then click Control Panel.

  Select devices and printers.

  In the top section, click on icon with the name of the computer and select the Settings of Installation of the device.

  In the settings window, select No, let me choose what to do and never install driver software from Windows Update.

  Click the save changes button.

  This will prevent the hardware drivers installed by Windows Update. You will receive still all the other updates to Windows as usual.

  If a piece of hardware should be updated in the future, you can just go the site of manufacturers of equipment and download/install the latest driver or reverse these options and get the driver from Windows Update.

  Concerning

• I wanted to disable Windows update service from command line. can you help me please on this?

  I wanted to disable Windows Update service by command line can help me on this.

  Hi Vikas Sharma,

  We do not recommend to disable the Windows Update service.

  However, you can try following step below:

  > In the Windows command line type the following command, and then press ENTER:

  > start wuauserv sc config = disabled

  Please let us know if that helps.