Change the size and font for any field type?

Similar Questions

• I don't know how to change the size and quality of the text on the screen on Windows 7

  I just installed a new Windows 7 but I don't know how to change the size and quality of the text on the screen.  I tried all the things normal, resolution, size of icons, dpi etc but nothing gives me what I want.  The text in clear 'wonderful' thing is just terrible.  When I go through the 4 steps I see no text boxes which make the text nothing better.  All options are terrible, so the result on screen is too terrible.  When I do any huge I do not get a full screen of things - view the Start button disappears or I did not closing small cross at the top - of the suggestions to inprove the situation?  I must mention that my screen/monitor is 2006 - I need to buy a new one?  How much is this Windows 7 is going to cost me, or maybe I should go back to XP!

  I sincerely thank all you smart "technicians" for all the answers you always gave myself and all others who ask questions.  I'm not too smart with all this new technology as I fell into it very late.  I am now in my 60s and only started using a pc when I was over 50 years so...  In any case, I asked a question about the size of screen resolution and text and received much good advice from all that you guys.  I had recently changed in XP to Windows 7.  However, the bit of advice that I was given in 'Cyberking' here at the Portugal had set the resolution of the screen, the advanced settings, 75 to 60 Hertz Monitor tab.  Very basic, and the first question asked the technician (Lady) was "what size is your screen?  Naturally as a smaller screen that any 'techno' would be considered dead aid, solving the problem was simple and straightforward without me having to stretch my knowledge and my skills by downloading all programes weird (to me) or do the funny stuff in the bios or something else.  I send this comment to you for you to realize that the simple solution is not always bad and maybe we should go for the easiest first and then work up to the more difficult ones.

  Just for you all to see - now my screen resolution is perfect, the text on the screen is clear and legible without difficulty, even though the size of text and icon is small.  Clarity is all!

  Thank you all once again!   Best regards, Blondie blue.

• How to change the size of font IR (only) dynamically

  Hello
  
  On the http://www.danielmcghan.us/2009/01/that-font-is-too-small.html blog, there was a great example of how to change the size of font IR on the fly.
  Some how seems that it does not have new reagent 25 theme, which is not having "td." If someone could help me.
  
  I would like to add a few record capacity in other tables (table user preferences)... Penny Please extend this example if possible.
  
  For this I did on the cloud Apex demo: FONT_SIZE_ADJ_APP
  
  http://Apex.Oracle.com/pls/Apex/f?p=2354
  
  Data connection:
  United Nations: guest_admin
  PWD: Qwertz123!
  
  THX in advance for your help.
  
  BRG,
  Damir

  The actual code Th example of work seems different from the blogpost

  Might want to try this code (in your page template)

  (-) Save / Reset (+)
  

  To save this in a table of custom user preferences:
  -You can change the application RETURN_NOTHING to insert/update process using the FONT_SIZE_ADJ element

  And add the calculation to set the value in FONT_SIZE_ADJ of the table for the first time user preferences when users login

• How to change the size and color of 'staticText '?

  Can anyone share please how to change the size and color of the object "staticText"?

  function buildUI (thisObj) {}

  var myPanel = (thisObj instanceof Panel)? thisObj: new window ('pallet', 'Gear of Stress', undefined, {resizable: true});

  var txt is myPanel.add ("staticText", [0,0,100,20], "txt");.

  txt. newFont, fontSize, color?

  Return myPanel;

  }

  var myToolsPanel = buildUI (this);

  I did a quick test on a PC at the office and it seems that Gill without isn't a stock PC police. You could comment on these out or change them to a police stock as Helvetica or something. Once I removed that it has launched on PC very well.

• I want to change the size and color of the text in the call boxes and text boxes. How can I do this? Jack

  I want to change the size and color of the text in the call boxes and text boxes. How can I do this? Jack

  Highlite the text inside the text box and press Ctrl + E.

• How can we change the text and fonts when you use the feature "painting".

  I use the "feature of the paint to the text of the announcement for the pictures, but I can't understand how to change the size of the text or characters.» The 'help' in the painting says that you can do both, but they don't say HOW! Help?

  Hi PTWG,.

  If your using Vista or XP while in the painting after that you drag the text window will come the possibility to change the font and size. If you do not see this option click on view and be sure there is a check box in the text toolbar.

  Does this solve your problem?

• Change the size of text for the radio button label

  Is it possible to change the size of the text of the label of a radio button component? I am creating a questionnaire for young people and the need for a much larger text...
  
  I know I could have no label and a text box, but the text box is not "clickable" while the label is.
  
  Thank you.

  ActionScript 3:

  var _textFormat:TextFormat = new TextFormat();
  _textFormat.font = "arial";
  _textFormat.size = 15;

  myRadioButton.setStyle ("textFormat", _textFormat);

  ActionScript 2:

  myRadioButton.setStyle("fontSize",15);

• Change the size and position of the icon of the list

  Hello!

  I tried to follow this tutorial to add social media icons to my site:

  http://www.webtutorialplus.com/elegant-social-media-menu-with-CSS/

  I managed to do that, but I'm now trying to reorganize (I think that's in the form of list), so that icons are aligned vertically, rather than horizontally.

  I also try to change the size of them, preferably so that they resize according to the fluid grid layout that I use.

  HTML:

  < div class = 'social' >

  < ul >

  < li > < a href = "#" title = "" > < span class = "icon" > < I aria-hidden = "true" class = "icon-facebook" >

  < /i > < / span > < span > as </span > < /a > < /li >

  < li > < a href = "#" title = "" > < span class = "icon" > < I aria-hidden = "true" class = 'icon-twitter' >

  < /i > < / span > < span > follow </span > < /a > < /li >

  < li > < a href = "#" title = "" > < span class = "icon" > < I have aria-hidden = "true" class = "icon-mail" >

  < /i > < / span > < span > Email </span > < /a > < /li >

  < /ul >

  < / div >

  CSS:

  .the

  {

  Width: 480px;

  top of the margin: 60px banner;

  margin-right: auto;

  margin-bottom: 60px banner;

  left margin: auto;

  }

  .the ul

  {

  padding: 0;

  list-style: none;

  do-size: 16px;

  }

  .the li

  {

  float: left;

  Width: 60px banner;

  text-align: center;

  }

  .the length of li

  {

  display: block;

  }

  .the one

  {

  display: block;

  color: #ffffff;

  text-decoration: none;

  -moz-transition: .3s.

  -webkit-transition: .3s.

  -o - transition: .3s.

  transition: .3s.

  }

  .the ul:hover one

  {

  color: rgba (255, 255, 255, 0.6);

  }

  .the ul:hover a: hover

  {

  color: #ffffff;

  }

  Li: nth - child (1) .the I

  {

  Background: rgb (59, 89, 152);

  box-shadow: 0 0 0 0 rgba (59, 89, 152,0.6);

  }

  Li: nth - child (2) .the I

  {

  Background: rgb (0, 172, 238);

  box-shadow: 0 0 0 0 rgba (0, 172, 238, 0.6);

  }

  Li: nth - child (3) .the I

  {

  Background: rgb (210, 64, 46);

  box-shadow: 0 0 0 0 rgba (210, 64, 46,0.6);

  }

  .the I have

  {

  position: relative;

  display: inline-block;

  margin: 0 auto;

  Padding: 12px;

  border-radius: 50%;

  font size: 30px;

  transition: box - ease-in-out s shadow.4;

  -moz-transition: box - ease-in-out s shadow.4;

  -webkit-transition: box - ease-in-out s shadow.4;

  -o - transition: box - ease-in-out s shadow.4;

  }

  .the has: i, .the one hover: active I

  {

  box-shadow: 0 0 0 25px transparent;

  }

  .the icon + duration

  {

  top of the margin: 20px;

  opacity: 0;

  -webkit-transition: all 500ms cubic-bezier(1.000, 0.000, 1.000, 0.650);

  -moz-transition: all 500ms cubic-bezier(1.000, 0.000, 1.000, 0.650);

  -ms-transition: all 500ms cubic-bezier(1.000, 0.000, 1.000, 0.650);

  -o - transition: all 500ms cubic-bezier(1.000, 0.000, 1.000, 0.650);

  transition: all 500ms cubic-bezier(1.000, 0.000, 1.000, 0.650);

  }

  .the a: hover span, .the one: active duration

  {

  opacity: 1;

  }

  / * ICOMOON starts here * /.

  {@font-face}

  do-family: 'icomoon ';

  SRC:URL('fonts/icomoon.eot');

  SRC:URL('fonts/icomoon.) EOT? #iefix') format('embedded-opentype'),.

  URL('fonts/icomoon.woff') format ('woff'),

  URL('fonts/icomoon.ttf') format ('truetype'),

  URL('fonts/icomoon.svg#icomoon') format ('svg');

  make-weight: normal;

  make-style: normal;

  }

  / * Use the CSS code after if you want to use the data attributes to insert your icons * /.

  [Data-icon]: before {}

  do-family: 'icomoon ';

  content: attr(data-icon);

  speak: none;

  make-weight: normal;

  do-variant: normal;

  text-transform: none;

  line-height: 1;

  -webkit - font smoothing: crenellated.

  }

  / * Use the CSS code after if you want to have a class by the icon * /.

  /*

  Instead of a list of all the class selectors.

  You can use the generic selector below, but it is slower:

  [class * = "icon" -] {

  */

  mail icon, icon-facebook, twitter-icon {}

  do-family: 'icomoon ';

  speak: none;

  make-style: normal;

  make-weight: normal;

  do-variant: normal;

  text-transform: none;

  line-height: 1;

  -webkit - font smoothing: crenellated.

  }

  icon-mail: before {}

  content: '\e000 ';

  }

  icon-facebook: before {}

  content: '\e001 ';

  }

  icon-twitter: before {}

  content: '\e002 ';

  }

  Thank you very much

  Max

  Not too sure.  You can try to change font-size: 30px to see if that does anything.

  Nancy O

• You cannot change the icon and font size

  Huge icons/fonts DPI of Windows Vista problems

  I logged on one night this week and all the icons and the font is huge!  "I did the ' set the DPI ' as realized several times and rebooted but it will not change size.  Help!  Thank you

  Hello

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  or:

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Change the sizes of fonts and colors without CSS [was: such a n00b]

  I can't believe I have to ask this question, but I want to change the font sizes, styles of fonts and colors in fashion Design CS5 (recently updated), but using HTML tags, not CSS.  If I use the properties panel in HTML only appear bold and italic, options where are other options gone?

  I found alignment on the Format menu, but every time I use this menu to change the font style that seems to get forced to CSS, and for the life of me, I can't find how to change the font size without having to edit the HTML code in code view, which I don't.

  Can such a n00b, anyone help please?

  [Subject line edited for clarity by Moderator]

  It is not uncommon, and talking about who I think that more people should use the Adobe - feature request/Bug Report Form and request a feature to turn on an entire document inline styles, because it is common to do for HTML emails like Great Outlook thing and is more picky and problematic email client It is a bit like IE, although IE is trying to move forward.

  In the Properties window, click then target CSS rule and choose the inline Style.  Then, Dreamweaver will apply an inline style for the element.  It will always write the CSS code, which is the right way, but it will write it inline, which is the case when you can not link to external CSS files.

• I want to know how to change the size of fonts and size of the pitcure of my screen

  I would like to help on my font size and the size I see on my screen, it's huge, and I would go back to normal size.

  I am running Windows XP Home Edition.

  I thank all those who can help me.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• How to change the size of fonts Windows 7.

  Original title: HP 300 series

  How can I change the font size in my 300 HP. Text is so small, that I have a hard time reading?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you want to change the font size.

  I suggest to try the steps in the Microsoft Help Articles below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/change-Windows-fonts#1TC=Windows-7

  http://Windows.Microsoft.com/en-us/Windows7/make-the-text-on-your-screen-larger-or-smaller?v=t

   

  You may consult:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-font-settings

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Can't seem to be able to change the size of font statictext

  Help out me here. I can't be able to apply a font size larger for a multiline statictext object.

  Here's the javascript function, which seems to work fine, except to interact with the font properties. I want to use the default font, but he wants a little bigger and points bonus - "BOLD". I myself just bigger.

  TIA

  function message_dialog(message) {
    //The dialog which displays a message and can also terminate the script
    var the_dialog = new Window('dialog', 'SuperDuper Find Change'); //Make the window
    the_dialog.alignChildren = 'fill'; // Make sure the child object have 100% width
    the_dialog.orientation = 'row';
    the_dialog.alignChildren = 'top';
    the_message_group = the_dialog.add('group');
    the_message_group.orientation = 'column';
    the_message_group.alignChildren = 'left';
    the_message_group.preferredSize.width = 300;
    the_message_group.margins = 4; //Set the area around the children.
    //Create a container for the message.
    st_message = the_message_group.add('statictext', undefined, message, {multiline:true});
    st_message.characters = 35; // WARNING: do not hit st.preferredSize before you set the characters property! 
  /** --- @TODO  The font change below appears to have no affect ---**/
    st_message.graphics.font =  'dialog:21';
    //Add the Okay button
    the_button_group = the_dialog.add('group');
    the_button_group.alignment = 'right';
    the_button_group.alignment = 'top';
    the_button_group.add("button", undefined, "OK");
    the_dialog.show();
  } //End message_dialog function
  

  CC and later, you can not change the appearance of the text in the controls.

• Change the size and spacing on the W7 Office as on XP icons

  I just got a new computer built for my wife who had XP Pro and upgraded to W7. In XP and earlier versions, the ability to change the spacing of the icon of the office and the size of the icons has been variable in small increments. In W7, it appears that these parameters have been set. I would like the ability to make the changes I've done so far in XP and previous. My computer is then to be upgraded and it's one of the things holding me. It's very annoying to not have this ability to adapt in this way.

  I just got a new computer built for my wife who had XP Pro and upgraded to W7. In XP and earlier versions, the ability to change the spacing of the icon of the office and the size of the icons has been variable in small increments. In W7, it appears that these parameters have been set. I would like the ability to make the changes I've done so far in XP and previous. My computer is then to be upgraded and it's one of the things holding me. It's very annoying to not have this ability to adapt in this way.

  Hello

  Right-click on an empty space on the desktop and select personalize.

  At the bottom of the window, select the icon for the color of the window .

  In the window that appears, click the link Advanced appearance settings .

  This will bring up the old style configuration window. Click on the drop down item and usethe icon spacing (Horizontal) and (Vertical).

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Adding, then by changing the titles of fonts for Windows 7 (this one is for a geek)

  I just changed computers from Vista to Windows 7.  Among the "improvements", several policies have been abandoned in Win7.  In more than 5000 sales pages on the site that I imported on the new computer, I created html calling "Lucida Handwriting.  Windows 7 has dropped this police.  I found on the web and imported into the Fonts folder

  The problem is the title in the police line, everywhere where I looked at is 'TR Lucida Handwriting' or 'Lucida Handwriting italic.  So sales pages will not be read.  I tried to change the name after the download, but the section fonts is not fooled.  It will allow him only in the section fonts under its original title.

  I know this isn't a big deal.  It's just that the sales pages (which are heavy in html and graphics) now don't look directly with the default font from Ms... for me.

  So my question is, is it possible to change the name of a font residing in fonts

  I really don't think that you can rename the fonts on the system.  But if you do a direct search and replacement, there are programs that can make it through all the 5000 files all at once.  Heck if it is plain text even a batch file could do.