Change the Tables using Incontext?

Similar Questions

• Apex 5.0.2 error when changing the table name in the treatment of automatic line of process (process row)

  Hello

  I need a little help...

  For some reason, I have to change the underlying table for a treatment of automatic process (process Row) line (form).

  Although such a change is possible in the designer of the page (under "settings") Apex does not recognize the new name of the table, but seem to rather use the name of the original table "old."

  Pretty strange (new/modified) (the new table columns) are (correctly) error message.

  For example, the 'old' is: TABLE_1 and TABLE_2 new.

  TABLE_2 has a new COLUMN_NEW column (and corresponding P1234_COLUMN_NEW page element exists)

  Then the error message says something like: not found COLUMN_NEW column in TABLE_1. Althougt I changed the table to be TABLE_2.

  Maybe it's a bug or I do something wrong about this?

  Thank you in advance!

  André

  OK, just to get some - you changed the name of the table twice:

  -Rendering of section--> Page1234: Pagename--> pre-rendering--> after the header--> process of--> line from TABLE_2

  -Treatment article--> treatment--> process--> process of line from TABLE_2

  I thought, that always seek you the line of TABLE_1

  Christian

• The table used to run very quickly

  I read about 22000 records of weak financial data in a graph of candel stick. The table used to run very quickly, but now it works slow Koala after some small changes. Ideas of probable causes?

  I figured out that the disabledDays was originally the slow almost 10 times slower

  disabledDays = "{offDays}.

• I changed my password of gmail e-mail. How can I change the password used by Thunderbird to connect to gmail.

  I changed the password used to access my gmail account. Thunderbird still uses the old password to access the account. How can I change the password that is using Thunderbird. The last time this happened I ended up creating a new account to Thunderbird for gmail. Create the new Thunderbird account at least let me enter the new password. I don't really want to have three accounts of Thunderbird for the same gmail account.

  Please do not respond with suggestions on using password manager. I do not use it and do not want to start. I looked, and none of my Thunderbird passwords are displayed here. All I want to do is change the password in Thunderbird. If Thunderbird does not have a feature that allows you to change passwords, should be added.

  The link posted by Christ1 gives WRONG directions. In Thunderbird 24.4.0, is:
  Tools, Options, security, passwords, saved passwords

  Admittedly, in fact, you want that he SHOWS you the passwords, and then you can delete them.
  Once fact you check for mail, it will tell you, it didn't, and then you have the option to enter a new password.
  MUCH too complicated. Time to put the password and the ability to change, in the e-mail account options.

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart

• Change the headings used in Command Center?

  I was wondering if there is a way to change the elements used in the command center? For example, to replace the calendar with something else.

  Thank you

  There is currently no way to change the applications that are launched via app Droid Turbo command center. The clock, batteries and the Accu Weather apps are the main applications, and calendar via the "Pop out" are the only ones available.

  There are other applications on the game you might like better as the "Rings Digital Weather Clock" you might find more functional for a particular use from you.

  I hope this helps!

• At the point of the map, how to change the font used

  Hello

  I want to change the font used in the bubble in Mappoint. I don't talk about boxing of text or the text size, I just want to change the police and use "Microsoft sans Serif".

  Is this possible?

  How to do?

  I used Windows 7,

  Best regards

  You can ask in the following forum because they are more likely to have relevant experts:

  Highway, streets and Trips, MapPoint .

• My Windows XP pro would not let me change the option 'Use the home screen', so I removed a vital .dll file. I can't start Windows now!

  My Windows XP pro would not let me change the "Use welcome screen" option under: user accounts/change the way users connect or power off.

  He gave a message to the effect (I forgot to write it!) "a recently installed program does not change this setting. Search in the file named "RtlGina2.dll for a clue. So as silly as I can be, I did a search, finds the file RtlGina2.dll in the Windows/System32 folder and cut and paste on my desk. My thought was to isolate this file to see if it will address the problem of not being able to change the option use Windows screen.

  Now, I can't run Windows! It gives a message that this file RtlGina2.dll is not found! Specifically, it says, User Interface failure. The UI for logon RtlGina2.dll DLL failed to load. Contact your system administrator to replace the DLL or restore the original dll.

  How can I replace the dll if I can't even get started? Help, please! I know just enough to get me in trouble I see.

  WyoPathfinder,
  Are you able to boot mode safe mode with command prompt?  If Yes, then you can search for the file "dir /s /a RtlGina2.dll" lists the location where you moved to.  Then you can just copy (path\filename) c:\Windows/System32\(filename)

  If you do not work in safe mode, then you can boot from a XP disc and go into the recovery console and do the same thing.

  Hope that helps. QQ learn manage!

• How to change the rendering used for video playback in Windows Media Center Version 6 engine

  I usually use other media players, but I would like to first of all using Windows Media Center. However for the moment video playback is not good because of the weird colors (everything is displayed in black and Red instead of normal colors). When you use other media players, I use the Haali rendering engine which gives good results for video playback.

  Can you tell me how to change the rendering used by Windows Media Center?

  Also, I noticed the same weird color effect in Windows Media Player 11.

  Hi Woobee,

  1. What is the brand and model of the computer?

  2. what graphics card use on the computer?

  If you are using an Nvidia graphics card on the computer, in the Nvidia Desktop Manager, you will find an option for saturation to ensure it is set to 100%.

  And if you are any other graphics card on the computer and search for a similar option for saturation.

  If the previous step fails in Windows media player, so be sure that the hue and Saturation are defined by default.

  1. click on the arrow on the tabplaying , point to enhancements, and then clickcolor picker.

  2. do one of the following:

  1. to return to the default color, click thereset link.

  Also, make sure that the video settings are set by default.

  1. start the playback of a file.

  2. click on the arrow on the tabplaying , point to improvements, and then clickvideo settings.

  3. click onreset.

  Check also in Windows Media Center if the

  1. on theStart screen, go to tasks, click settings, clickgeneral, then Visual and sound effects.

  2. undercolors ensure that Windows media center standard is enabled.

  Turn off Visual and sound effects in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-Visual-and-sound-effects-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I can't change the location using activation please

  I can't change the surprise using activation please

  Hello

  Sorry for the inconvenience caused.

  I suggest refer you to the link below on how to enable Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/why-activate-Windows

  I hope this helps.

• How to know the tables used in packages of a schema.

  How to know the tables used in packages of a pattern that I have connected.

  SELECT DISTINCT referenced_owner, referenced_name

  Of all_dependencies

  Owner WHERE = "MY_USER_NAME".

  AND type ('PACKAGE', 'BODY of PACKAGE')

  AND referenced_type = 'TABLE '.

• How to insert image from mysql into the table using php and create the checkbox in the table?

  How can I insert image from mysql into the table using php and create the checkbox for each data as a vote? Here is my code...

  WELCOME

  connect_error) {die ("connection failed:".)} $conn-> connect_error); } $sql = "SELECT no, Calon, ID, of course, the Image OF THE candidates." $result = $conn-> Query; If ($resultat-> num_rows > 0) {echo ' '; export data of each line while ($row = $result-> fetch_assoc()) {"echo"}}

  NO	Candidate	INFO	Vote
  " . $row ["no"]. "		-" . $row ["Calon"]. " -" . $row ['ID']. " -" . $row ['class']. " "; } ECHO ' ' ;} else {echo '0 results' ;} $conn-> close();?} > hope someone can help me because I am a newbie in this program... need to finish this project... Thank you.

  If you have saved the file name in the database, it's pretty simple.

  echo '';
  

  Is the same for the box:

  echo '';
  

  If you have saved the image file in the database, it is much more complicated. I recommend you store only the file name in the database.

• Change the vmnic used by the service console

  Can someone help me change the vmic used by the concole service, when I write the command excfg, I get the message:

  excfg-vswitch - L vminc0 vSwitch0 "segmentation fault".

  Thanks to y using the year.

  AFAIK vmnic0 is assigned by default to vSwitch0.

  First, try it canceled with: esxcfg-vswitch - U vmnic0 vSwitch0

  I use the procedure below to delete vSwitch0 and create a service named TSV - cos console switch.

  esxcfg-vswif vswif0 d

  esxcfg-vswitch - del - pg = "Service Console" vSwitch0

  esxcfg-vswitch vSwitch0 d

  esxcfg-vswitch - TSV - cos

  esxcfg-vswitch - L vmnic0 TSV - cos

  esxcfg-vswitch-add-pg = "Service Console" TSV - cos

  esxcfg-vswif - a vswif0 Pei "Service Console"-i < ESXHOSTIP > - < ESXHOSTSUBNETMASK > n

  Arnim - van Lieshout

  -

• change the port used by apex 4.0

  Hello
  
  How can I change the port used by apex? For example, instead of 8080 I want to use 8081
  
  Thank you

  If you use OC4J, or any other application server, but you do not use the EPG you must reset the EPG

  exec dbms_xdb.sethttpport( 0 );
  

• Cannot change the table in a layer [was: another weird One]

  I created www.ccahv.com with Dreamweaver MX and now seeks to update with Dreamweaver CS3.  The buttons are in a table on a layer to easily copy, but I can't change the table to add a button.  Impossible to insert an image.  The pages are modified by a Secretary with Frontpage 2000.  Who would have something to do with it.  I am sure that I've updated these pages in June and October with the CS3 version.  I am at a loss.  Help!

  joepd

  [Subject line edited for clarity by Moderator]

  First, fix the validation errors. You have the doctype declaration in the body.

  > The buttons are in a table on a layer

  Avoid layers unless they are necessary.