Change the value of all slides

Similar Questions

• Change the value of all the keyframes (Animation-tween)

  Hello

  There is the posibility to change a value in all selected keyframes?

  I have two boxes:

  Left with a rotation animation,

  Right with animation of position.

  I know with the white arrow, I can select the 'path' and change the position.

  But how can I change the position of an object without animation of position?

  Thank you!

  

  I don't really understand what you're showing. In your layer of mc-Hello, I see four key frames. When you first highlight the 'Hello' layer shows a zoom with no change in position effect. You try to move the 'Hello' zooms in from the central location to the upper right corner?

  If that's what you want to achieve, you must select all instances of edits to move the entire animation. A simple way to do it is to slide the selection around the entire animation tool once you select Edit several images. The way you select in your example, you are only selecting one instance to a keyframe and spend only one.

• Change the time for all slides display?

  Captivate 6, is there a way to say, "all the slides in this simulation of software have a display time of 3 seconds.  Change them all to 4? »

  Please tell me that I don't have to change the time individually for each slide display...

  Thank you

  JK

  It is very easy to do before the capture preferences, default, slide Defaults, duration of slide.

  But it's too late. No panic please don't try this way:

  1. Select all of the slides in the film (CTRL-A after selecting a slide)
  2. Change the length of time in general, just below the quality parameters.

  Lilybiri

• How to change the value of the Application for all users?

  Hi, I work on Apex 3.2.1.00.12 which is installed on a database of Oracle 10 g Enterprise Edition Release 10.1.0.5.0
  
  I'll explain my problem... At the beginning of the application, the user choose a year, each year can have 3 status and based on the State to restrict or grant access to certain tabs, pages and options. I put the status of the year selected in an Application element and then I just use an authorization scheme to check if the user can access pages or options.
  
  The problem is that if the administrator changes the status of the current year (for example, 1-2), users who are currently in the application will have access to the options of the State 1, instead of the State 2 options. is there a way to change the value of this element for all users?
  
  Thank you.

  Force a disconnection of all users? You can't really affect the values of the sessions other than your own via a browser, and from the point of application is part of a single session...

  You could re-read the value of point of application of its source whenever you load a page or tab game...

  Thank you

  Tony Miller
  Ruckersville, WILL

• Cannot change the value of mousewheel scroll

  After you have reinstalled windows and all I had on my old desktop, I seem to be unable to change my amount of scrolling the mouse on firefox. I looked through all the troubleshooting questions that have already been posted, and all users have responded that I had to access about: config and change the value of mousewheel.withnokey.numlines.

  However, when you access everything: config, I discovered that not only I don't the integer specified, I don't have any integer with a preferably name that contains "withnokey", so I tried to add it in me, but not to use. Currently my parchment done on lines 6 and 7 and I would like to go down to about 3.

  Hello, Skarlath, the scrolling behavior has been overhauled in firefox 17 (see for reference https://wiki.mozilla.org/Gecko:Mouse_Wheel_Scrollingtechnical information) - the old setting longer reverberate.

  It must still be possible to set a different frame rate. You can enter about: config in the firefox address bar (confirm the message information where it appears), search preferences starting with mousewheel.default.delta_multiplier_ ..., you can double-click on these parameters and assign a different value to - then a restart of firefox is required for the changed settings is taken into account.

• Change the value of varying directly?

  Suppose I have a variant from an external source.

  Suppose I know the data type, but I don't know the attributes and their values (if any).

  Is it possible to directly change the value of the variant, "under the hood" so to speak and leave all attributes intact?

  I know that I can read all attributes, generate a new variant with my new data and write them all back, but that seems very inefficient.

  Casting of new data to a variant, and then using the variant of data to convert the Original variants type that seems to work as well. Once again, kludgy.

  Sting autour with «...» VI.lib\Utility\VariantDataType\*.*, but so far, not to find a method 'live '.

  Thank you!

  You can use the structure of the element inplace to set the value of a varying existing.  It retains all the existing attributes.

• How can I change the value of a control on front panel?

  On the front panel, I'm doing a complex control that consists of a Slider control and control of the digital inputs. Both controls display the same information and either may be used for entry. When changing value, I want the other control to display the same value.

  How can I change the value of a control on front flap when another control changes the value? I know how to use a structure of the event to detect value has changed, but I do not know how to impose control on front panel to change its value in the block diagram.

  Why do you not use a digital display on the slider, and no code is required:

  

  EDIT: Yes, he said. ***

• change the value of the button cluster

  Hi all

  I wrote a program that has 5 poles and all groups contain a STOP"" button. the program can stop when the button is pressed.

  When I press the button, the value of the button goes to False and else False. I want to come True. so I tried using the 'value' property and set the value "False".

  but it is still true.

  I use event structure to see that the value changes. and set to 'Stop the value changes' all buttons in a single event.

  How can I change the value of the false button?

  Thank you

  Ritesh

  
  

• How to change the value of string clustered, to implement using the node value of property instead of writing directly on the flow of data or using the variable

  new to labview :-) and I have a problem when I want to change the value of a string in bunches, and I want to implement this using the node value of property instead of writing directly to the stream or by using the variable, enclosed is the picture.   No matter, I have change in cluster (control) or value of Popery out (indicator) cluster, the value (sensor 7) dataflow keeps unchanged even I gave the new value by value of property node. Thank you to give me some advice about this.

  

  Hi GerdW

  Thanks a lot for your answer. The reason I'm stubbornly tring to break the flow of DATA is: we have a test system that have about 100 screws, they have a few connected flow, some of them will be unbundling a cluster dataflow chain to check the value in order to make the different cases.  Now I want to insert user event by changing the control and influential cases during run time.

  As I initially uses a global variable (to control cases) instead of unbundle string data flow, it works well.  But then, I found there are a lot of screws that are using the string unbundle.  One of the 'lazy' means, I tried is to change the value via the property node (because that way, I did not need to find all the places where using the unbundle string and replace them with the global variable), then I noticed a problem with "dataflow", the value in the stream of cluster in fact will not be changed by changing the value of the property node.

  I did a test with VI simple (like the picture in last post), and after reading your advice, I tell myself that I need to understand the concept of "DATAFLOW" in labview, it seems that my "lazy" way can not work in this scenario.

  I have attached the criterion VI here, have you furthur suggestions on what I can do in this case?

  Mant thanks!

  Minyi

• Is it possible to change the values of particular #define of the various controls in CVI.

  In my application, I have different panels to file single .uir. When I save the .uir file, I get the same values of #define for different controls in different panels. For this reason, I am not able to use these #defines block switch. Is it possible to change the values of #define according to my condition.

  Hi, a little more Wolfgang post. It is the combination of the Panel to manage and control the unique ID: as you know, you can load the same panel more than once, so even if you recover the full chain of PANEL_CONTROL you have duplication. items that exactly identifies a particular control in a particular group are the combination control panel manage AND panel_control ID.

  On the one hand which guarantees more flexibility to your application, you can design only a few panels and reuse them whenever you want, even having some of them loded several times in the same instant. On the other hand, as you have discovered, there is the possibility (Finally, almost certain) duplicated in your app ID.

  To resolve the problem of duplicated IDS you can act in two ways:

  1. If you know that no Panel is never loaded several timer in your application, you can retrieve the name of constant of Panel with GetPanelAttribute (panelHandle, ATTR_CONSTANT_NAME, string); and to distinguish between the name of constant, then switch between control ID

  2. If you happen to have duplicate panels you will need to store each panelHandles in the non-volatile variables, switch between them and then switch between the control ID

  An alternative might be to use Panel callbackData attribute and assign a significant value during the loading of the Panel, other callbackData finally from a control ID. Something like this:

  Loading panels:

  panelHandle = LoadPanel (0, "myfile.uir", PANEL1);

  SetPanelAttribute (panelHandle, ATTR_CALLBACK_DATA, (void *) 1);   Assign different callbackData in each instance

  During the failover between controls:

  void * cbkd;

  GetPanelAttribute (panelHandle, ATTR_CALLBACK_DATA, &cbkd);)
  Switch (cbkd (int)) {}
  case 1: / / elements of the PANEL1
  switch (command) {}
  case PANEL1_NUMERIC:

  your code here
  break;
  case PANEL1_STRING:
  your code here
  break;
  }
  break;
  case 2:
  // .....
  break;
  }

  One final note: it seems to me that all this is necessary in a very limited situation, where you have the same callback called on various panels/controls. Whenever the reminder is unique to a specific panel or controls on a single panel you don't need to work that way.

• How can I change the value of a print job in Visio 2003. It is for 1 or 2 pages, I want that he 9 printing pages. Thank you.

  How can I change the value of a print job in Visio 2003.  He is currently configured to print pages 1 and 2, but I want to print all 9 pages at a time.  Thank you

  You can remove 1-2 and type 1-9? All HP and Epson printers I have worked this way.

  That's all I can offer as I'm not familiar with your printer.

• [ADF, JDev12.1.3] SelectOneChoiche created from VO instance with 3 fields: how to retrieve the value of all the fields of the selected element?

  Hallo,

  I defined a VO with 3 fields (A, B and C) and I would like to create a SelectOneChoiche that shows only the field as options from this instance of VO.

  In a managed bean, I need to retrieve the values for all areas (A, B and C) of the item selected by the user.

  I started dragging the entire VO instance to UI to create a SelectOneChoiche (in which I have chosen to show only the to field).

  Then, I created a for the SOC ValueChangeListener read the values A, B and C of the selected element, but the only thing I've done is to get the displayed value:

  System.out.println((String) ((RichSelectOneChoice) FacesUtils.findComponent("MySoc")).getValue());
  

  You kindly help me?

  Thank you

  Federico

  Federico, sorry I didn't see your answer.

  As you use 12.1.3 you can do this more easily than the code that I posted before. You can use

  {} public void onCountrySelection (ValueChangeEvent valueChangeEvent)

  FacesContext will involve = FacesContext.getCurrentInstance ();

  Make sure that the selection change is processed and the current link lov line has the new selected line

  valueChangeEvent.getComponent () .processUpdates (contxt);

  BindingContext lBindingContext = BindingContext.getCurrent ();

  BindingContainer lBindingContainer = lBindingContext.getCurrentBindingsEntry ();

  List JUCtrlListBinding = lBindingContainer.get ("CountryId") (JUCtrlListBinding);

  the newindex in not necessary, but ok let's get it (must be equal to the CountryId, the pharmacokinetics of the binding of the lov

  String newindex = (String) valueChangeEvent.getNewValue ();

  get the selected value in the list that is the selected line of the binding of the lov

  Line lFromList = list.getSelectedValue () (line);

  now, we can get the attributes of the line of lov

  String s = (String) lFromList.getAttribute ("CountryId");

  System.out.println ("CountryId:" + s);

  String s2 = (String) lFromList.getAttribute ("CountryName");

  System.out.println ("CountryName:" + s2);

  BigDecimal s3 = lFromList.getAttribute("RegionId") (BigDecimal);

  System.out.println ("RegionId:" + s3.toString ());

  }

  The form that I use is based on the location of the HR DB schema table. The CountryId is configured in the view object to display a lov based on the campagneVoir. This view contains thre CountryId, CountryName and RegionId attributes.

  If you want to get to the attributes of an action listener you can use this code

  {} public void onGetSelectedCountryLov (ActionEvent actionEvent)

  BindingContext lBindingContext = BindingContext.getCurrent ();

  BindingContainer lBindingContainer = lBindingContext.getCurrentBindingsEntry ();

  List JUCtrlListBinding = lBindingContainer.get ("CountryId") (JUCtrlListBinding);

  get the selected value in the list that is the selected line of the binding of the lov

  Line lFromList = list.getSelectedValue () (line);

  now, we can get the attributes of the line of lov

  String s = (String) lFromList.getAttribute ("CountryId");

  System.out.println ("CountryId:" + s);

  String s2 = (String) lFromList.getAttribute ("CountryName");

  System.out.println ("CountryName:" + s2);

  BigDecimal s3 = lFromList.getAttribute("RegionId") (BigDecimal);

  System.out.println ("RegionId:" + s3.toString ());

  }

  You must add the valueChangeListener and at least add the lines

  FacesContext will involve = FacesContext.getCurrentInstance ();

  Make sure that the selection change is processed and the current link lov line has the new selected line

  valueChangeEvent.getComponent () .processUpdates (contxt);

  to ensure that the selected line is available when you click the button.

  And set autosubmit'= true for the field in the UI that displays the LOV.

  Timo

• change the value of swatch

  Is it possible to change a specific color swatches value?  What I have so far changes the color, but does not maintain its overall value. I'm trying to change the value of set color chart, in turn changing the work already defined in a model.  Hope it makes sense.  Any input would be appreciated.

  var docRef = activeDocument;

  docRef.swatches ['color 1' Base] .color = new RGBColor (0,0,0);

  (1) your code doesn't really, because it's not how you define the new color object. It seems to work because the shade changes from white to black, but it is actually by default all black is not recognize all numbers in your new RGB color. Try to put it to any other color other than black, and you will always get black. The way to do it properly for a sample of process is here:

      var docRef = activeDocument;
      var newColor = new RGBColor();
      newColor.red = 255;
      newColor.green = 0;
      newColor.blue = 0;
      docRef.swatches ['Base Color 1'].color = newColor;
  

  BUT WAIT! There is MORE!

  (2) we will assume that you are using the Global checkbox and not simply rely on the color chart of regular processes to act as if they were global. So in order to correctly set the global shades, you actually do this way, not through nuances, but through 'points '. Fortunately, the tasks of the document have the same name as the nuances related to them, is almost the same statement.

      docRef.spots['Base Color 1'].color = newColor;
  

• $esxcli to change the value of IOPS / s?

  So im trying to change the value of IOPS / s by '1' it seems im on the right track in looking at a few other scripts that had something similar, but mine does not seem to the entire cluster in loop, look like it does, but only the last host gets the values updates, so I'm missing here?

  Is it a snippet of code to connect to a VC, good practice get guests on a Cluster / Datacenter, then run agaisnt them? ID like to be able to keep a good labour code and then re use it on all my scripts? Now that I see this error Im curious to know if I was fooled into thinking that my other scripts worked not only on all hosts in a Cluster, which is a good way to check that?

  THX!

  # Script Variables
  $VC = Read-Host "Please enter the name of the VirtualCenter.
  $mycluster = Read-Host "Please enter the name of the Cluster or Datacenter Edition"
  $DiskID = "naa.600".
  $esxlogin = get-Credential
  # Connect to VC and get the ESX hosts per cluster named
  SE connect-VIServer $VC | Out-Null
  foreach ($esx Get-cluster $mycluster |) Get - VMHost) {}
  SE connect-VIServer $esx - Credential | Out-Null
  }
  #Retrieve instances esxcli and loop through them
  {foreach ($esxcli in Get-EsxCli)
  $esxcli.system.hostname.get)
  $esxcli.storage.nmp.device.list () | where {$_.} Device-match $DiskID} | % {
  $esxcli.storage.nmp.psp.roundrobin.deviceconfig.set ($null, $_.) Device, [long] 1, "IOPS", $false)
  }
  #Disconnect of ESX host
  foreach ($esx Get-cluster $mycluster |) Get - VMHost) {}
  Disconnect-VIServer $esx.name - confirm: $false
  }
  VCenter #Disconnect
  Disconnect VIServer $VC - confirm: $false | Out-Null

  You get the same behavior (white screen) when you run the script directly from the PowerCLI prompt?

  This could be a phenomenon of PowerGui

• Management while changing the value or by clicking on the button events

  Hi all
  
  I'm working on Jdeveloper 11.1.1.5.
  I have a necessary requirement where I have a textbox and a button.
  Now, if a user changes the value of the text box then I need to display a dialog to the user for confirmation if he wants to continue or not.
  And when the click on the button that I perform my logic and engage in the database.
  NOTE:-I'm going to open this dialog box on the valueChangeEvent of the text box.
  
  Case 1: -.
  
  User displayed on the dialog page and enter a value in the textbox control, and a tab on the ground, the value change occurs. -> OK
  
  Case 2: -.
  
  The user enter a value into the textbox control and do not tab on the field and directly click the button. In this case, actually valueChange and button code both runs at the same time. I mean, the user clicks the button, the dialog box get, but my logic is also performed. -> INCORRECT (ISSUE)
  
  How should I limit the logic of the button should be executed until the dialog box has been established and the user has confirmed.
  Please suggest!
  Kind regards
  Shah

  Hi Shah,

  You can try something like this:

  AP