Change users on the client
Is there an easy way to change the user after the first use? I don't see any options for logging on the server as a different user on the system.
If you click on servers and edit it should allow you to delete the current configuration of the connection broker.
Tags: VMware
Similar Questions
-
I am trying to create the shortcut to "change user" using rundll32.exewithout to create the shortcut to "lock", only to pass the user. I already know that I have to right click on an empty space on the desktop, press New\Shortcut and type%windir%\System32\rundll32.exe user32.dll,but not after the comma. Type so I can only create the shortcut to "change user" and not the shortcut to 'lock '? (This means that I don't want this: %windir%\System32\rundll32.exe user32.dll, LockWorkStation, with LockWorkStation after him.)
Unfortunately, it can be done in your version of Vista (or so they say, hang on a moment.) I found the article according to that cllaims to do in Vista Basic and Vista Home Premium in addint a file and shows a set of procedures. As it is a 3rd party file, do so at your own risk. http://www.vistarevisited.com/2008/08/02/create-a-desktop-shortcut-to-switch-users-in-vista/. NOTE: This is not how you suggested higher, but if it works who cares?
In case you don't want to consider the solution above, you have refused, here is the procedure (how to do it in other versions of Vista):http://www.vistax64.com/tutorials/136969-switch-user-desktop-shortcut.html.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
How do I change user to the administrator account when it all together to standard users.
Hi I set up my computer girl with their username first and then when I put mine up to put parental controls on it mine was the standard user. I changed mine to the administrator and his standard, but how some were now two standard users. I can't enter in allocate framework and programs now, he asks me the administrator password, but me don't give no option to enter one. I was about to reinstall windows, but there is no disk with him. All the world and ideas how to fix it.
Thank you
Ryan
You can use system restore to set up Windows to a point until you have changed the password now:
1. put your BIOS so that it uses the DVD drive as its primary boot device.
2 start the computer with your Windows 7 repair CD.
3. press a button if you are prompted to start from the DVD.
4. When prompted, select "Safe Mode Command Prompt".
5 log in as administrator if you are prompted.
6. Select repair when prompted.
7. When you are prompted, select System Restore.
8. set Windows to a point before this problem occurred.
9. When finished, remove the CD before restarting the system.
In step 2, you can also use the Windows 7 installation DVD. The subsequent steps are similar to those above.When you're done, plan and create a second account. admin record its details on paper so that it will never happen.
-
Loss of connection Wifi in fast changing users on the satellite A110-252
Hello
In accordance with the subject line, but the connection seems to be disconnected when you return to the user. In other words, the connection is maintained while you're in the other user accounts, but when you return, it is disconnected and then reconnected. Hope it makes sense.
I added the following to the record that worked on my last Toshiba (Satellite 1800-921 with PC Wifi card)
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\KeepRASConnections = 1
But it always disconnects back to the user account.
Any ideas how I can stop this maddening behavior?
Thank you
Dougie
Hello
tried to update the drivers of your wireless and chipset? Attention to the updates of Windows and reinstall the wireless client.
Your problem is truly software related, then perhaps update this things I mentioned above should probably help.BTW. I didn t had the same problem but I solved problems with my wifi connection by updating the drivers, etc...
Welcome them
-
Insider source subscription. Could not retrieve the client certificate
Hi all
I created subscription source initiated between two Windows 2008 R2.
The source (client) cannot connect to the server. Logs on the client:
Send the request for operation to the destination machine enumeration and the server.corp.domain.com:5986 port
Authenticate the user using the Client certificate mechanism
User authentication failed. The credentials did not work.
Has received the answer of the layer network; status: 401 (HTTP_STATUS_DENIED)
WSMan enumeration operation failed, error code 5
Opens a session on the server.
Sending HTTP error to the client after a failure of transportation.
The HTTP status code is 503
The error code is 995Could not retrieve the client certificate
Send the HTTP 401 response to the client and disconnect the connection after sending the answer
The user authorization failed with error 5Authorizing the user
Authentication using client certificate with the client.corp.domain.com object is successfully
How to fix the error "unable to retrieve the client certificate?
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Windows Server 2003 R2 Standard Server
Client-side: Windows 8The problem:
I create a new user and let the "user must change password at the next logon' checked. When I try to log in with the newly created user I get an error saying "User must change password at the next logon" after ptoviding the new password.
At this point if I uncheck the "user must change password at the next logon', then the user can connect properly.
Can someone help me. Please let me know any problem OS compatibility between the server and the OS cleint.
Jaril
Hi Jaril,
Thanks for posting your query in Microsoft Community.
According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.
Hope this information is useful.
-
Hello
I have this sample application:
- I have a view object with a view criteria added to my data model of the app module.
- Then, in a page fragment /, I created a table based on this view object, and drag-and - drop operation ExecuteWithParam binds variables to the page as input fields of text with clientComponent = 'true '.
- Next, I added a listener client in each of the fields of type keyPress entry to call the following JavaScript method whenever the user presses the Enter key:
function handleEnterEvent(evt) { var _keyCode = evt.getKeyCode(); //check for Enter Key if (_keyCode == AdfKeyStroke.ENTER_KEY ){ var comp = evt.getSource(); AdfCustomEvent.queue(comp, "EnterEvent", {}, false); evt.cancel(); } }
4. then I added a server listener to these same "EnterEvent" type text input fields to call a method in my grain of support, that basically runs the OperationBinding ExecuteWithParam programmatically.
The problem:
- I type "123" in my it1 text entry field and press the Enter key. The operation is performed and the results of the table are filtered as expected with the view criteria.
- I then clear the value in my it1, change the cursor in my it2 of text entry (without pressing enter), type 'Hello' and press the Enter key. The operation is performed, but the results are incorrect - the results indicate values as if the value "123" was always filled the it1 (and respective value of binding).
- If I do the cursor resume my cleared it1 text input and press the Enter button, the results are now correct...
It's like bind values are updated only when the client event is triggered in this specific field... How should it be properly implemented? What Miss me?
Thanks in advance. Kind regards
-Tiago Vidigal
Try to set autoSubmit = "true" for the text input element
Timo
-
Users and levels of security in the client of the lookout
I would like to setup users with different levels of security in my client application of Lookout 6.7. When I try to add a user, I get an error message that says "add user operation failed. See system drive disk space» There are a lot of disk space, 50GB. Is it possible to have the users connect to the client with different levels of security?
Thank you
Brad Adams
Communications Group Inc.
Launch Manager users in administrator mode
C:\Program Files (x 86) \National Instruments\Shared\Logos
Right-click "usrmgr.exe", select run as administrator
-
Hello
I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.
"You cannot connect because the logon method, you use is not allowed on this computer, please, see your ad min for more information network"
Please help me with that and I don't want to give permission to admin for all users group...
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Disconnect the user from the sql server Server 2008 SQL server client
Hello...
Please can someone guide me on how to disconnect the server SQL server 2008 sql server user client if the client is more than 10 minutes of inactivityThank youSaloméHello
SQL Server is not supported in these forums. Please ask the appropriate here Microsoft TechNet Ant:
http://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer
Thank you.
-
Dear all,
I intend to install on Server 2008 SBS Active Directory domain controller. In this session, I would like to know the client users can connect to the SBS server or not. If CAN, I want to know the steps & solutions on this answer and if NOT, why the clients could not connect to the SBS server.
Server 2008 SBS can also be installed on the sequence of steps:
SBS 2008 (AD, Exchange Server, SQL 2005 or 08, CRM4.0). It depends on the situation of the organization.I really want to know that, if we install steps on SBS 2008 above, can clients connect to the server?
Kind regards
Tun Aung KyawHi Geraldine Tun.
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
Original title: change user
After the last update of xp, we have not been able to change user without password. We do not know the password. What can we do?
See if that helps...
Cannot lock a "locked" computer administrator
Be sure to check your screen savers. -
What is the process to remove or change user profiles in windows xp sp3?
Let me know, what is the procedure to change or remove the user account in windows xp service pack 3?
Hi varun,
Click Start--->Panel---> user accounts---> click to change the account that you want to 'Edit' or 'delete '. You must be a user with administrative rights to perform this task.
Note: If you are not already in "Classic view", you can do it in the left panel.
Good luck.
-
For NetWeare customer service
How can I close the Client Services for Netware that is me project to use the fast user switching without losing my internet connectionHello
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in Forum.You IT Pro can follow the link for your question:
http://social.technet.Microsoft.com/forums/en/category/w7itpro
-
On my HP 510 laptop, I want to change the power mode to one of the user accounts. It cannot be changed of in the user account, so I followed these instructions: log in as administrator, do the selection desired in the list of available eating patterns (Control Panel, Power Options, eating patterns), click on apply, then log in as administrator. I find that the selected power mode has been applied to the administrator account, but not to one of the user accounts. I tried to change in the user account, but still receive the "access denied" response
I recently installed Microsoft Security Essentials. My reading of various internet stations indicate that some older antivirus programs may have hindered this process of power management. I was not able to discover how to inactivate Security Essentials, so did not try to change the mode of power without interference from her.
Another indicated position of the potential interference of the BIOS settings. I don't know how to check if this may be the case. I have MS Windows XP Pro SP3 installed. I have automatic and current updates.
Thanks for any help, you can suggest.
Hello
You can change the setting in see Group Policy for this document:
http://TechNet.Microsoft.com/en-us/library/cc730920.aspx
Or change temporarily the user to an admin account, make the changes and then return as a standard user.
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
How to export the results of the DIAdem script to Excel sheet?-attachment
Please, this is the Script file for, y previous question?
-
Not sure if the problem is hardware or software. Reinstalled Vista (32 bit) and all programs. Make sure that the appropriate driver has been installed at HP. Can access the internet via ethernet, but wireless is detected with excellent resistance but
-
On my windows vista computer, whenever I turn on my computer and log on, none of my programs work. An error message appears saying that the program has stopped working and windows will try to find a solution to the problem. The problem is that the h
-
Problem in the sqlite statement
public static final String DATABASE_TABLE_SIZE = "SizesLookup"; public static final String KEY_SIZE_ID = "SizeId"; public static final String KEY_SIZE_Name = "SizeName"; Statement st = null; try { st = db.createStatement("INSERT INTO" + DATABASE_TABL
-
Hello IM pretty new to the Conference and I got confused on the following scenario: I need to be a conference for 13 calls from the neighborhood of 13 other branches in full HD, now I need to deploy 5 monitors in the neighborhood and 2 monitors in ea