Disconnect the user from the sql server Server 2008 SQL server client

Similar Questions

• Disconnect the vCenter Server host machine

  I get error message after converting physical machine Desktop ESXi 5 using VMware Converter Standalone 5.0 utility whenever I deleted the host of the vCenter Server computer.

  This utility is installed on the desktop computer physics but prompt error on the screen "System Destination of"VMware Converter utility.

  Error.

  "The creation of host resource access is limited to the server"130.0.34.210"who manages the host. Use the destination administration server.

  You can help.

  Know not question, http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2012310

  Use vCenter server as a destination and try

• Parse error the file server clients.xml - after upgrade to Windows XP

  After a lot of Googling, any discussion of this "error analysis of the server clients.xml file" is centered around the problems in Windows 7 before the last update. But I'm in version 4.0 on Windows XP and it worked fine for several months...   After this last series of XP was updated a few days ago, I now get the connection analysis problem and a reinstallation of the client has not changed anything.

  With more precision, I had used the client to connect to the ESXi machine, then was downloading a large vmdk on the local computer from the data store and it was abandoned in the early hours of the morning to 67% complete, and when I discovered it in the morning, the local PC had been restarted , with alert windows to system tray "Due Windows install an important update and restart your computer" etc. I also rebooted on the ESXi machine management agents, does not.

  Have not tried to restore to a restore like still - point finally need to keep the machine upgraded to windws last orders. I can hit the ESXi machine from another computer XP adjacent to the computer problem, same vlan, etc by using the virtual Client, no problem.

  The logs show that the error is caused by a (probably on ESXi) clients.xml file check with result a "ambiguous match."   Uninstall the vSphere client must leave info register behind, or the IPS machine is to remember something on my local computer connecting to it somewhere...

  -steve

  That is your problem

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1022611

  If you find this or any other useful information, please consider

  awarding points to 'Correct' or 'useful '.

  Gregg Robertson, VCP, MCSE, MCSA, MCTS, MCITP

• How to create insert statements in the SQL Developer client

  Hi all
  
  A toad, we can create instructions for insertion of data in the table by clicking with the right button on the table and selecting create insert Stmts. But I am new customer SQL Developer. Could you please let me know how to do that in SQL Developer. I would be grateful if someone posts a link to the manual of the SQL Developer (how to use SQL Developer).
  
  Thank you.

  SQL> create table staging(x int, y varchar2(3));
  
  Table created.
  
  SQL> create table base(x int, y varchar2(3));
  
  Table created.
  
  SQL>
  SQL> insert into staging values(1,'ABC');
  
  1 row created.
  
  SQL> insert into staging values (2,'DEF');
  
  1 row created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> select * from staging;
  
           X Y
  ---------- ---
           1 ABC
           2 DEF
  
  SQL> select * from base;
  
  no rows selected
  
  SQL>
  SQL> insert into base
    2  select * from staging;
  
  2 rows created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> truncate table staging;
  
  Table truncated.
  
  SQL>
  SQL> select * from staging;
  
  no rows selected
  
  SQL> select * from base;
  
           X Y
  ---------- ---
           1 ABC
           2 DEF
  
  SQL>
  SQL> exit
  

• Where have the VMWare Server "client / console ' downloads went?

  either he had formerly downloads as "VMware-console - 1.0.6 - 91891.exe" who were just the client end.

  Such as those mentioned in the: http://pubs.vmware.com/server1/admin/wwhelp/wwhimpl/common/html/wwhelp.htm?context=admin & file = manage_server.5.6.html

  I can't find a download like this for 1.0.8 and I think I'm having a problem of compatibility with 1.0.6.

  I don't really need to install the whole invasive Server installation just to get the client for my office.

  Any ideas?

  Maybe he underwent a change of name? But I'm not in the lists mentioned in the 'names have changed.

  Thanks in advance for any help.

  Feeling a little down on our first foray in VMware at this point...

  I feel like VMware dropped us in a dead-end street with the strategy that we are...

  Same place, that downloads have always been.

  Go to the download page for the server.  Click the link to download under Server version 1.0.8.  Accept the EULA.  On the download page, there is a link for the Client Windows VMware Server package.

• Virtualize the existing server

  Hello world

  First of all, I want to mention that I'm kind of beginner to virtual systems.

  I have a project that I need to virtualize one of our existing server. I have a HP ML350 G4 test the system and running server current which is HP Proliant DL380.

  All I want is drag a system virtulazation O/S (Win2003) current with the server. without losing anything on the server (if possible).

  I installed Windows Server 2003 standard on the test server (HP ML350) I installed ESX Server 3i. ESX3i works well, but the ' 03 victory.

  So, my point is how to install ESX3i (or any product free compartable) on Windows 2003 is installed system without losing win ' 03 and convert win'03 to virtual pc and move it to ESX3i. (IE, using vmware converter)

  Is this something impossible that I'm looking for? (See attached photo)

  Kind regards

  Serhan

  Your VM is a backup of the server running.  There are no worries!

  You can also install the converter on a normal PC and access your existing server on the network.  Once the conversion process is complete.  You have a copy of your existing server.  You may install VMware Player on the same PC, and then 'test' that the virtual machine works exactly has your existing server before installing ESXi (disconnect the existing server on the network before you start your virtual machine in order to avoid conflicts of network address).

  You should then install ESXi that replaces the Windows operating system currently on the host computer.  When you do that, you can copy the previously converted VM / tested on the ESXi server to run.

• ESX 4.0 U1 host disconnects the VC

  Hey people,

  I'm working on my test bench trying to put on after a stop of 6 months.  I changed my ip address, in everything from virtual machines, host esx (alone) and iscsi (openfiler).  I could work very well using webaccess.  My VC works very well.  So my DC.  All are virtual machines.  The problem is that I connect to the host at the VC and all is well for anywhere from a minute to three minutes and then VC loses the connection to the host.  I clik on the host esx and clik 'connect' and I connected again for the above period.  I unplugged the host several times and then reconnected.  No change in problem.  I searched some vestige of the old ip addressing, which could cause the problem but can't find anything that I have not changed.  I have not stopped all my VMs and restarted the esx host.  I restarted the services and vpxa mgmt.  Someone has an idea of what I'm missing here?

  , You update the DNS records for the host ESX and vCenter Server?

  André

  EDIT: You can also read KB1011647 - ESX host continually disconnects the vCenter Server following an upgrade to ESX 4.0

• Change Vcenter DSN 2005 SQL native client for SQL 2008 native client

  Hi all.

  I tried to upgrade our Vsphere for VM Windows 5.5 to Vsphere 6.0 for Windows (latest version of January).

  The upgrade checking failed after entering the credentials of user Vcenter. The error is 'unsupported database driver.

  In fact the DSN connection uses the SQL native client 2005.90.2047. Is also on the system SQL native client 10. (Version 2009.100.2500) is installed. I think it's the SQL 2008 R2 native client.

  The SQL Vcenter database is on a remote database SQL 2008 R2 server.

  I tried to change the DSN of SQL native client 10. The service started, but I've seen lots of SQL errors in the vpxd.log. I could solve only to return to the snapshot and restore the SQL database.

  How can I change the SQL Native client to connect DSN correctly?

  Thank you very much in advance?

  Edy

  Have you removed the old DSN entry and created a new using the driver of the new (and good)? And have you checked the registry if your change reflected here (\VMware Virtualcenter\DB HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.)?

• VIX file in the user interface designer receives the data from the Web service application that communicates with the SQL server database

  I created the Web service VI ("Mt-insolacije.vi"), which has two terminals of the input string (FROM / TO) for the dates of arrival and exit of two data terminals (table 1 d) from database (MS SQL server). This VI communicates with the database with functions of the database with a DSN and SQL query appropriate palette. There are two tables with two data (time and Insolation) columns in the database.

  This VI works when you run in Labview 2010, but when I used it as VI in UI Builder it returns no data.

  Could you please help me find a solution. Is it possible to communicate with the SQL server database in this way or there is another way?

  There are two files attachmet: Image of .vix file in Interface builder and .vi file ("Mt-insolacije.vi")

  Please help me ASAP!

  Thank you

  Ivan

  I found the solution problem is in the DSN. I've been using the user instead of DSN system DSN.

  It's important to create the system DSN if you want your VI of web service to communicate with the database.

  PS Please put feature bundle format timestamp and XY graph in the web user interface designer. It's complicated to trace data with datetime on X axis without them.

• Is there a way to allow users to disconnect their sessions on a remote server to the RDP from their local machine?

  QWINSTA and other command line utilities are a bit too complicated for the end users, we of course do not disconnect the session hurt accidentally. In general, we only questions with sessions stuck to a few users who would be perfect if utilities command-line integrated for rdp sessions would allow to change username, but since they require a dynamic session id # I don't know how this could be scripted. Is there a tool available for Windows 7 clients on a Server 2008 RDP allowing them to disconnect from their own session if they are blocked? We have enrolled in different time zones who have to connect remotely in order to do their job and sometimes it is too early here for someone to be there to help.

  I found a http://www.ctrl-alt-del.com.au/ , but it says it is only for Server 2003 and I tried and got an error flashed too quickly to be read.

  Thanks for your time.

  Hello

  Welcome to the Microsoft community.

  I would recommend you to view the query on the TechNet Forum which, I am sure, will help you better.

  You can check the link to the request message.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Click on a question and post your question.

  Please write us if you have any further questions.

• Disconnect a session from the Terminal Server Services causes system hiccups.

  Dear reader,

  We noticed some undesirable in MSTSC behavior when a network connection drops during a session-MSTSC to a server. What happens is that when the user is disconnect from the remote session due to network connection dropping, the entire system freezes for a few seconds, making the communication on other physical cards within this same remote device which are not affected by a network connection cannot fall.

  In order to reproduce that we run several tests on the following versions of windows using various equipment:

  • Windows 2003 Server Standard Edition
  • Windows 2008 Server R2
  • Windows XP

  Tests were performed on both physical and VMWare virtual servers. All systems are equipped with at least two physical ethernet adapters on different IP networks.

  During the test, we put a MSTSC connection to windows server during the first card (A) on this server. On the other (B) ethernet card we have implemented an application to communicate to a client on another machine, sending simple messages every second and receiving responses.

  When we pulled the ethernet adapter cable has and in doing so, disconnected the MSTSC, the communication on the ethernet B card connection would fail aswell for a few seconds.

  Is this a known issue? And in such a solution?

  RayZ001,

  Thank you for visiting Microsoft Answers!

  The question you have posted is related to Terminal Server services and would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:
  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• To get disconnected from the game server

  Original title: recently moved from Virginia to Kentucky, since then I am disconnected to each game server I tried after 5 minutes.

  Recently moved from Virginia to Kentucky.  Since then I get disconnected from each game server, I tried after about 5 minutes. What is happening on 2 separate computers.  Any suggestions?

  Hello

  1. What is the operating system installed on your computer?

  2. are you referring to the games installed on your computer, or play games online?

  3. which web browser you are using?

  4. you get any error message?

  5 is the issue limited to game servers?

  Please provide us with more information on this issue to help you best.

  Try to disable the antivirus software and check if it works very well.

  Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  NOTE: after completing the troubleshooting steps, please activate the antivirus software

  If the problem is only on two separate computers, it could be a problem with your Internet connection.

• How to completely remove the SQL Server 2008 R2 from my system?

  I got the SQL Server loaded on my computer before I realized it was the express edition that I needed. When I tried to load the version I needed the computer said that I had to create a new instance for the second version to run simultaneously. (had already uninstalled the original SQL Server and did not not the problem.) I went through the steps again and somehow there is the menu server must remove files, but they can access it. The only solution I see at the moment is to reload the server and uninstall and I hope that everything that caused its not completely withdraw from my system is corrected. Please tell me there is another solution which has guaranteed results.

  Hi Avendia,

  Your question would be better asked on the SQL Server forum

  SQL Server Forum
  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer

• convert the data in the Format of Date imported from MS SQL Server.

  I imported data from MS SQL Server. The column 'Date' received in digital format as 41017.6361109954. How can I convert Date in Oracle SQL.
  
  If I import the same data in Excel and you change the Type of column to this day. He passes. But in Oracle, I tried the To_Date function with different parameters, but it did not work.
  
  Published by: XAVER 22 April 2012 02:31

  select timestamp '1970-01-01 00:00:00' + numtodsinterval(41017.6361109954,'day') from dual;
  
  TIMESTAMP'1970-01-0100:00:00'+NUMTODSINTERVAL(41017.6361109954,'DAY')
  ---------------------------------------------------------------------------
  20-APR-82 03.15.59.990002560 PM
  
  SQL> 
  

  SY.

• PL/dynamic sql to retrieve the data from the production server

  Hello
  
  I need to create a dynamic pl/sql program to retrieve all packages from the production server and store it on my local machine in another file.
  
  Thanks in advance.

  Hello

  user9963922 wrote:
  Hi Peter,.

  Thanks for the reply.
  I need make my block dynamic while in a single query, for different packages I can save it in another file with the same name as the package on my local machine.

  What is the problem with the suggestion of Peter? This is not 'dynamic' on this subject?
  To save the code in the files, use utl_file. Inside the loop, open, write, and close a file. If you need help, your zip code and a description of the specific problem.

  It is also possible to use only user_source table to accomplish the task.

  Yes, but it doesn't work for you own schema.
  If you do not use user_source, then you will not need any condition as

  and owner in ('')