Change your displayed icons (gestures) on Palm Pre

Similar Questions

• Change your favorite icon pinned to the start screen

  Hello. Is it possible to change the icon used when PIN you a website to your start screen? Right now, he's using an Internet Explorer icon with the title below. I would like to be able to change this icon to another image which is more easy to differentiate than the IE logo. Thanks for your help!

  Good info Ronnie.  And as you say, it's not really a way with a site is pinned.  The site owner will decide what image appears on pinned sites.

• Palm Pre is no longer syncing with Google Calendar

  I had my pre for 4 to 5 weeks, and when I got it, I configured the calendar to sync with my Google Calendar.  Everything worked well.  At one point, he stopped synchronization.  If I add something to the calendar via Google, I do not see on my pre and if I add an event on the pre, he never appears on Google.  Of course, I tried the option sync nothing helps.  I don't know whether or not this happened around the V1.1.0 update.  Is anyone having problems syncing with Google Calendar?

  THX,

  Brett

  Hello Bartman,

  You can try remove and add the gmail account to the pre.  If this does not work, try to create a test gmail account and add it to the front.  This will tell you if your email account or the Palm Pre.

  Let us know what happens...

  Thank you

  Cola

• How to change the voicemail number Palm Pre (Bell Mobility)?

  Hi all...

  I wonder if someone has found a way to change/edit the phone number of voicemail by default on the Palm Pre. When I touch to listen to my voicemail on my pre, it dials my phone number (instead of composing the Bell number requires me to dial which is #902393xxxx pp then my password digital - note the # beforehand), which comes in turn allows me to leave a new message for me.

  I talked to Palm support and they told me that my phone is setup and working correctly and it must be a problem with my service provider. I've been a happy Bell customer for 10 years or more and I am sure that my voicemail works well... Just to be sure I contacted support Bell and they assured me that I have to dial sign # in front of my 10-digit number, then my password to access my voicemail.

  I know I could just program an another SpeedDial to accomplish this task, however, I can't believe that there is no way to use this function as expected?

  Thoughts?

  Thank you...

  Well Yes, it's gets me too. I'll speak to a Bell representative tomorrow, but is this the silver bullet...

  Create a contact in your address book called voicemail

  Then you enter the number you need. I found the # key registers correctly.

  For a sweet break (2 seconds, no prompt) use the letter 't'

  to pause farm (a prompt will appear on the dial to press a key to continue dialing pad) use the letter 'p '.

  That should do it.

  I went a step further. And if you're not too nervous about to search your phone (and if you have time) I made a few changes that did get to voicemail even easier than pulling the top of the dial pad. Slight caveat about this, it is really involved, may be too involved for you, but it made me love what you can do with the Pre

  I went to the Central meadow, I configured my pre for Homebrew applications (not too hard, and had to do it on a computer with XP, it did not Win 7) I downloaded a homebrew application called launch pad (Super easy, done right the phone). I created my voicemail number to be an icon in the launch area. THEN, and this is the super cool part. I touch AND HOLD on one of the icons in the launch at the bottom of the screen until there is a ripple around her. I drag it to the launch area to take him out of the launch bar. Then I reach and grab the voicemail icon, until the ripple and drag it in the launch, and PRESTO, I have a button to access my voicemail.

  Again, I understand that this process may be too involved for you. But with a little sniffing around, I was able to add my voicemail on the launch I can access any program at any time.

  Yes I think Palm should do a better job with documentation. Their new philosophy that people don't want uninvolved help or manual files is silent. BUT I liked the fact that with a little work, you can do MUCH more functional phone. We would have to do the work? No, but I have a good feeling that Palm will impliment better functionality as time passes. They have always in the past. And until that happens, there are a few tweeks that can help until this happens.

  Love the pre so far...

• All icons on the desktop changed to display the logo of Word (W)

  Separated from this thread.

  My HP laptop running on Windows 7 Home Basic 64-Bit. I have Microsoft Essentials antivirus. All icons on the desktop has changed to display the logo of Word (W). When I try to open programs, they all open the new document page in Word with "File Conversion - explorer.exe" dialog box. This happened after I inserted a borrowed Memorystick. Why can't I clean my pc with Microsoft Essentials?

  Hi Kata'ntja,

  If you can access the internet in any way, If you use Windows 7, go to http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html. and run the program to restore the EXE and possibly LNK file associations. That should restore your programs.

  Good luck

  Kosh

• Error messages on the Palm Pre 2 - "could not send your message because of a network error. Try Again' 96

  I used the Palm Pre 2 when I was in the United States with an ATT Sim Card and I was able to use all the features well. I come down to the India and got a local SIM with data services. I am able to check email / synchronize outlook etc and make calls. However I get an error for text messages "" could not send the message due to a network error. Try again. 96 "

  Please tell me what could be the cause. Have restarted the phone twice, no change...

  Would appreciate any help you can give me on this

  I thought about it. I have a 32 k SIM. If I use a 64 k SIM, SMS works fine

• I used to be able to change the display of the icon in the section Customize.

  At the bottom of the screen to the icons, you can move the toolbars, there was an option to display icons only or icons and text. What's the version 29 Also, where is the button reload?

  You can watch the classic extension theme restaurateur restore some features that has been lost with the arrival of the Australis style in Firefox 29.

  • Restorer of classic theme: https://addons.mozilla.org/firefox/addon/classicthemerestorer/

  That extension will add these buttons the window palette to customize.

  • https://support.Mozilla.org/KB/how-to-make-new-Firefox-look-like-old-Firefox

• Control Panel No. icons after changing the display language

  After I change the display language of the Korean into English, there is no evidence except windows update in Control Panel.

  Could someone help me with this?

  Hi Jeremeyz,

  Sorry to hear that you have lost the elements of the control panel. I'll try my best to get the problem resolved.

  Try performing an analysis of the System File Checker and check if it helps. You can also start the computer in safe mode and check if the problem persists.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• How can I display icons and text in the bookmarks toolbar. If I roll over the icon I can see the text. I want the icon and the text are always visible.

  Previously, the name of the link and the icon icon was visible in the bookmarks toolbar. I did something to cause the name disappear and cannot find a way to get it back.
  The only visible, at least I have the cursor on the icon, the icon itself.

  Hmm, I can't imagine an integrated way to display only the icons. Is it possible that one of your modules has changed the display style? You have "Roomy Bookmarks Toolbar"?

  You can view your extensions on the addons page and when they have an Options button, change their behavior. Or turn them off. I suggest starting your investigation with those:

  Open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Something seems relevant to the bookmarks toolbar?

• Palm pre - name account profile

  I've updated my account name to palm profile via the section account management on the palm Web site, it has also changed under the backup application on the pre.  But when I'm in contacts > preferences & accounts. It still shows the old name of the Palm profile account.  Any way to have this update to the new name?

  Found this one.  It will update the show name for the palm profile (Contacts > preferences & account, there are stream) If you delete the profile on your phone and add it again.

• Palm Pre - cable USB disconnect annoying message

  Whenever I have my my Palm Pre USB cable, I get the "data has been corrupted, but was retrieved. Always take out your phone from your desktop computer before disconnecting"a message.

  I get this even if I unplugged first using the icon 'Remove hardware safely' in my taskbar, to "Remove USB mass storage device".

  All had experience of the world, and you have a suggestion about how this message can be deleted?  Or is this a bug with the current Palm OS 1.02?

  You need to go to my computer and looking for Palm Pre as a hard drive. Right click and select eject and you stop trying to get this message.

• Palm Pre won't Charge / turn on

  Heres is my problem. My palm pre battery when it is plugged in to recharge (with charger official palm pre, power supply) needed to DUMP when it's plugged in. I thought it could have been just a connection sometimes losing since sometimes charged and discharged. Shortly after this discharge started, I got it for free because I would have rather had a battery in any life. At the end of the day, my battery is completely dead and phone turns off. Not much, right? I'll come right home and put it on charge. Well, not so simple. When my phone support (with the charger official pre, tried in the sector, have tried in the laptop, have used 3rd party chargers) all I get is the battery charging icon. This is the red bar at the bottom with the lightning symbol on. I've tried everything. I cleaned up the phones to the compressed air connection, I took out battery for all-day to try, but nothing. My pre remains on this all day and dosent turn, once unplugged it shuts down. Could someone help me please? I can't take it on 02 since brought off the coast of a friend who have never experienced this problem, and it dosent have more paperwork to 02. is my phone broken? are there solutions? Thanks for help in advance. Craig

  I don't know if I can be of any assistance on this.  I think you should try webOS Doctor.  It is a program that reinstalls the webOS on your phone.  It could be that webOS has corrupted itself and must be reinstalled.  It's the only thing I can think of now.  If a webOS Doctor does not so I think that your problem is more serious than just a malfunction or software battery problem.

  Get the webOS Doctor here: http://ws.hpwebos.com/webosdoctor/sorry.htm

  You'll need your phone S/N from here (or take the back cover): https://ps.palmws.com/palmcsext/console/pages/LoginPage.iface

• notification area icons change to "Show icon and notification. »

  For some reason, the "Windows Task Manager" notification icon continues to change its behavior.  I had put the behavior "Show icon and notification" to the Manager of the tasks, but when I right click on the taskbar and select "Start Task Manager", I get the up arrow icon icon rather than the Task Manager.  I go to the arrow and click on customize and change the behavior to return to "Show icon and notification.

  Is there a reason why it keeps changing to "display only notifications?

  Hi Artoo,

  Thanks for posting your query in Microsoft Community.

  I understand from the description of the issue, your computer task manager notification icon continues to change.

  I appreciate if you could answer a few questions:

  1. What is the brand and model of your computer?

  2 have the Windows Task Manager before notification work?

  3. the question has started recently?

  The task manager has two different views. For the display that includes menus and tabs, double-click the border of the Task Manager window. To return to the view without menus and tabs, double-click anywhere in the border around the tabs.

  I suggest you follow this Microsoft article below which will help you to solve the problems of Task Manager, under article is also applicable to Windows 7:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Task-Manager-problems

  You can also see this Microsoft article for more information:

  http://Windows.Microsoft.com/en-in/Windows7/change-how-icons-appear-in-the-notification-area

  Let us know the status of the issue.

• change Windows 7 icons

  Windows 7 Professional is changing icon on the desktop to a default value. Been looking for a solution and failed. Microsoft Fixit does not work either. Went into program files and the icon is changed there too. Rebuilt and deleted the icon cache, no help. Properties will not allow the change of the icons. Not all icons are changed to default, tried to return to the program folder and send a shortcut to the desktop, but the folder icon is also default. Anyone having problems with Windows 7 change their icons? If I do a restore back pretty far, it is a temporary solution, and later, Windows 7 because of the stuff that's once again.

  Hello

  Thanks for posting your query in Microsoft Community.

  From the description of the problem, it seems that program icons change to the default icon in Windows 7.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. have you installed any folder icon application/third-party program installed on the computer?

  2 have what Microsoft Fixit you tried?

  3 did you do changes on the computer before the show?

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Also post screenshots that can help us to understand the issue much better. You can see the following link how to display the screenshot.

  How i: post a screen shot on this forum?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

  Hope this information helps. Reply with more information about the issue so that we can help you better.

• The Tungsten T3 for Palm Pre data migration

  Hello

  I am the owner of a Palm Tungsten T3. I have a lot of contacts, calendar, tasks and Memo data in I want to migrate my new Palm Pre. I saw Palm information on how to move the data from Palm Desktop for the pre, using the data transfer Assistant (DTA). However, it seems to work for Palm Desktop v6.2. T3 is not compatible with v6.2, being the latest sw version v4.1.4.e.

  When I launched DTA, I got an error. I tried several things and looked in the forums, but only to find tips for v6.2. In the end, I decided to upgrade to v6.2 in my Windows XP, but I skipped stage of synchronization with my camera (such as the T3 is not compatible). Then I run the DTA. This time, I got to the step when it asked me to connect my pre as a USB key. But after that, he tells me that Palm Desktop is installed, but contains no data to transfer. However, I can see my data in the desktop. My guess is that I could solve the problem if I could synchronize with a PDA compatible.

  Can someone give me a hint on how to transfer data to my pre of my T3? Is this possible at all?

  Thank you

  T

  Hello tekila29 and welcome to the forums of Palm.

  tekila29 wrote:

  Hello

  I am the owner of a Palm Tungsten T3. I have a lot of contacts, calendar, tasks and Memo data in I want to migrate my new Palm Pre. I saw Palm information on how to move the data from Palm Desktop for the pre, using the data transfer Assistant (DTA). However, it seems to work for Palm Desktop v6.2. T3 is not compatible with v6.2, being the latest sw version v4.1.4.e.

  You will not be the Tungsten T3 or the Palm Desktop 6.22 Pre - synchronization you will use as a vehicle to move the data into your pre.  I suggest that you use the command Export of Palm Desktop 4.1.4e for export data PIM (Contacts, calendar, tasks and Memos) out as a file in comma-delimited (.csv) as a backup before installing Palm Desktop 6.22 as the data upgrade process can not be cancelled.  If you need to go back to Palm Desktop 4.x and do not have a backup, you will be out of luck.

  After you have backed up your data, I upgrade to Palm Desktop 6.22, DTA can migrate your data in the meadow and then synchronize the Pre with a Google account to access e-mail and calendar.

  To fix your data problem in the second part of your post, you can try to install free third-party utility, PalmHotSyncSetup.  This changes the Windows for Palm Desktop registry keys so that he could support the older devices like the Tungsten T3.  You can download PalmDesktopHotSyncSetup from Pimlico Software Web site.

  Hope that helps,

  Alan G