Changes in font color of dynamic form after the backup

Similar Questions

• Change header font color using CSS is not the effect

  Hi guys,.
  
  I tried to set the forecolor of header in 'red' using CSS, but no effect.
  
  Any alternative?
  
  Thank you.
  
  Criz

  Criz,

  We cannot use the names of color in CSS, you must use predefined names
  For a red header use OraErrorHeader, more balance of styles of fonts.

  http://download.Oracle.com/tech/blaf/specs/textstandards.html

  Thank you

  With respect,
  Kali.
  OSSI.

• If I create a form using the free trial software, will I be able to use and access the form, after the trial period is over?

  If I create a form using the free trial software, will I be able to use and access the form, after the trial period is over?

  Yes, you can access the project that you created after the trial is over, but you need to back it up.

  Concerning

  Stéphane

• Application of VO becomes empty after the backup of the VO

  Hello
  
  Application of VO becomes empty after the backup of the VO. Can you please let me know why this is happening.
  
  Thank you
  HC

  Again create a new VO with the same query, save it and open the Jdev and let us know the result.

  Don't forget to win twice three times the time :)

  Thank you
  -Anil

• DREAMWEAVER6 - CHANGE OF FONTS & COLORS

  In Dreamweaver 6, I created a new fluid layout. I created some DIVs (4). In the 3rd div, I changed the color of the font. The new color appears on the website in my computer desk, but seen in a Tablet and a cell phone, the font color does not change. It's the same thing in mode Live view in Dreamweaver. It shows the new color on view of the office and not in the mobile phone or view tablet. Also, I changed the font itself in one of the DIVs and it appears in the new font on the website through the computer and the desktop view, but not on the tablet or cell phone. Can someone please explain. I want to be able to change the fonts and colors for display in the Tablet and mobile phone, too. The fonts were all standard fonts. Sans-Delphine and Verdana and Arial are considered. Thank you.

  Burton Allan wrote:

  LINK TO the SITE IS: http://www.burt100.com

  I am a beginner only to learn. It is not a complete site, but I'm stumped on this problem. The comments appreciated. Thank you.

  In Dreamweaver 6, I created a new fluid layout. I created some DIVs (4). In the 3rd div, I changed the color of the font. The new color appears on the website in my computer desk, but seen in a Tablet and a cell phone, the font color does not change. It's the same thing in mode Live view in Dreamweaver. It shows the new color on view of the office and not in the mobile phone or view tablet. Also, I changed the font itself in one of the DIVs and it appears in the new font on the website through the computer and the desktop view, but not on the tablet or cell phone. Can someone please explain. I want to be able to change the fonts and colors for display in the Tablet and mobile phone, too. The fonts were all standard fonts. Sans-Delphine and Verdana and Arial are considered. Thank you.

  Queries support fluid grid css in DW have been working for the phone on the desk NOT the office on the phone. You set the font size and color in the ' Mobile put in page "request media. The css 'Tablet and desktop' will inherit these styles UNLESS you change them in media queries 'Tablet and desktop '.

  If you include the (marked in red) below in the "Mobile Layout" css media query for #LayoutDiv5, you will see the result. If you want to change the size of the text and the color of the text, you must override in the appropriate support request.

  / * Mobile layout: 480px and below. */

  {#LayoutDiv5}

  Clear: both;

  float: left;

  left margin: 0;

  Width: 100%;

  display: block;

  Color: #0F0;

  do-size: 36px;

  do-family: without serif.

  }

  So in the application of media "Shelf layout" you might want to change the 36px to 26px text size and color from green to white:

  / * Tablet Layout: 481px to 768px. Inherits the styles of: Mobile layout. */

  {#LayoutDiv5}

  color: #FFF;

  font size: 26px;

  }

  If you still want to change color/font size for the 'Desktop' layout provide css changes in this media query:

  / * Office Layout: 769px to a maximum of 1232px.  Inherits the styles of: Mobile and tablet. */

  {#LayoutDiv5}

  Color: #000;

  font size: 50px;

  }

  Everything you are seeing in the phone and Tablet for now is the default 18px/white you set on the body css:

  body, td, th {}

  color: #FFF;

  do-size: 18px;

  }

• I need to change my font color and background color are both black

  Hello
  I chose accidentally black for my font color and background.
  Since everything is black, I can't see the text in my window from the preferences (or modules) to restore.

  Any ideas on how I could do this?

  Thank you!
  NC_P

  Thank you for the update. If you notice anything important missing, as the parameters for an add-on, you can open this prefs.old file in a text editor and probably find it in there. We'll be there if you need help in this sense.

• Dynamic form in the current state (fields visible/invisible)

  I've created my form dynamic so that some fields are visible and invisible, based on other selections in the form.  I created a submit button using a standard button and parameters to send the PDF file as an attachment to the appropriate address.  When the attachment is opened, the presence of the fields return to their State to be visible or invisible.  It's the same look you have when you open the PDF file under a new name.  The data entered by the user is still in the fields, some are just invisible.  Is it possible to send the PDF file with the visible/invisible state of all fields when the Send button is pressed?

  Example of

  
  

  New file is opened:

  Field visible =

  Field B = invisible

  The user changes the settings and submit the form:

  Field = invisible

  Field B = visible

  When I opened the attachment:

  Field visible =

  Field B = invisible

  Hello

  Check the properties of the form.

  There is a setting preseve script changes.

  Details on are explained in the tutorial video (03:10 min)

  http://TV.Adobe.com/watch/working-with-Adobe-LiveCycle-ES2/configuring-Forms-to-preserve-s cripting-changes.

• Do not forget the values in the form after the page

  Hello
  
  IM absolutely new to APEX (as you can see this is my first post ;)), I've read the documentation, I found on the oracle Web site and know at least the basics...
  So I started building my first application and already have my first problem :D Maybe you can tell me if I want to do is possible and how to do it.
  
  I have several pages by a form on the left side as well as a report of sql on the right side.
  The form contains fields that are the list of values (fields that contain foreign keys so that the user can select only a valid value). I have a button next to each list in the value field. When the user clicks on the button I have a branch to the same page and the sql report is updated. Depending on which button next to the list values with foreign keys was pressed, it shows the complete table list the values of references to (so the user can see that contains the foreign key, it is to select). After I finally made this work.
  
  But the problem is: when the user enters values in the form and then click on a button to see what the foreign keys contain values that it has already entered disappeared. But I want the values that he went in to stay in shape after he pressed the button. is there an easy way to do this? the only thing I could imagine is to create a variable for each form field, save current in variable values before the page is sent and write the values of the variables in the form when the page reloads. but it seems kind of the beast... I must do this for each page of this kind (which are many). so is there a better way?
  
  thx a lot :)

  I think you're talking about the region 'filter' on the left side as 'form '.

  Try this... Open the setting page , click on the item to change (to that values stay after submit), goto SOURCE region, here the source value * "only when the current value in session state is null" * this will fix the problem.

  See you soon,.
  Hari

• fonts Mathematica does not properly after the senior at el capitan

  I used Mathematica 5.2 on my MBP with Mountain Lion. After the upgrade to El Capitan, there is a problem loading the fonts and Mathematica does not load correctly. Any ideas? Wolfram has a package of fonts, but don't know what fonts to download or how to install them on my MBP. Any ideas?

  Please, back up all data before proceeding.

  Launch the application book fonts and validate all the fonts. You must select the fonts in order to validate them. See the built-in Help and support article for instructions. If the font book detects any problems, solve them.

  Start in safe mode rebuild the font caches. Restart as usual and test.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or the boot volume is a software RAID, you cannot start in safe mode. In this case, ask for instructions.

  If you still have problems, then in the font book menu bar, select

  The file restore Standard ▹ fonts...

  You will be prompted to confirm and then enter your administrator login password.

  Also note that if you disable or remove built-in fonts, for example by using a third-party font manager, the system may become unstable.

• CP 1025: CP1025 wrong color or white pages after the first page

  Hello
  Our company have 3 cp1025 printers. 2 of them get a problem (almost at the same time) which can be described as follows:

  -printing wrong colors, colors are mixed, for example indeed black color prints blue and it is colorless. It doesn't go to the first page, in addition to pages only.
  -printing of blank pages. First page printed perfectly, more pages are blank.

  We do not find a problem. Tried to change the new drum unit, pilots, we are working on Win XP and Win 7. Can you say something about this problem?

  One problem was a dirty printer. It was full of dust of color toners. Once it has been disassembled and cleaned, print get to normal. It's a good lesson on the use of non-original toners, some of them was poor in quality and color of dust fell to the mechanisms of the printer.

• Fonts Typekit works is not after the publication of leading edge project

  Hi, I added the myriad of Typekit project edge lead and after the application of the police, that it looks great and even when I 'see in the browser' it works fine.

  My problem is after the publication, the default font its additional substitution (Serif-Sans) fonts in all browsers.

  Am I missing a step in the publishing process?

  Hi Nathan,

  Sorry for the delay to return to you; I see your response Friday. Done cover license fonts Typekit using web fonts in banners that will be placed on the websites of third parties, but the domain name should be listed on your kit you found. When the Typekit JavaScript runs in the browser, it checks the referer browser against the field on the kit. If the domain name in the referer matches your kit, the font files are not loaded.

  If you know the domain name of the place or places by using the banner, you can include them in the package and fonts on Typekit will work as usual.

  If the banner can be used on a variety of unfamiliar names, however, the best option is to serve in an iframe with an attribute known CBC and include the URL of the source on your fonts kit. Iframe referer matches the URL of the CBC, not the parent page, and the fonts will load in the iframe.

  I hope this helps; Let me know if you have any other questions. Best,

  -liz

• The font color does not appear in the menu

  I wonder if someone can indicate why the color of the font in the menu does not appear. I chose white as my color, but I still see the default is blue. the link is here and the code are provided. Thanks in advance.

  http://www.rodriguezstudios.com/PCR/

  < div class = "navbar" >

  < ul >

  < li > < a href = "#1" title = "Home" > home < /a > < /li >

  < li > < a href = "#2" title = "Hourly" > repository < /a > < /li >

  < li > < a href = "#3" title = "About" > on < /a > < /li >

  < li > < a href = "#4" title = "Contact us" > contact us < /a > < /li >

  < li > < a href = "#5" title = "Blog" > Blog < /a > < /li >

  < /ul >

  < / div >

  {.navbar}

  float: left;

  Clear: none;

  Width: 248px;

  height: 300px;

  margin: 0px 0px 0px 0px;

  font-size: 24 PX.

  color: #FFF;

  do-family: Georgia, "Times New Roman", Times, serif;

  }

  .NavBar li a {}

  height: 32px;

  "" {voice-family: "------"} \ ' ";

  voice-family: inherit;

  height: 24 PX.

  text-decoration: none;

  }

  .NavBar li a: link, .navbar li a: visited {}

  Color:. FFF;

  display: block;

  background: #1F8A70;

  padding: 8px 0 0 10px;

  }

  .navbar Li a: hover {}

  Color:. FFF;

  background: url (navbar.gif) 0 - 32px;

  padding: 8px 0 0 10px;

  }

  ul {} .navbar

  list-style: none;

  margin: 0;

  padding: 0;

  }

  Syntax error.

  Color:. FFF;

  should be

  color: #FFF;

• How to clear the form after the error

  Hi friends
  
  Use oracle 10 g forms in windows xp sp2, I'm doing a form accepting the user input to the editor only for practice because it is a first time I use the editor and all that just for the test and I need your help. to display the editor when the press operator in the text element, that I use (integrated Show_Editor) then the value entered in the editor will display in the text element, and there is a problem of query by this value. so far it's very well.
  
  If the operator to enter a wrong value the request that I made the alert for this message and I pulled the trigger of the error alert, but after the user press the button in the alert in the event of failure message incorrect value even in the text element.
  
  
  This is the first screen, now I insist in the EMP is
  http://i48.Tinypic.com/28us1l4.jpg
  
  It is the second screen. Here, you need to clear the message and enter a valid value, but assume that you enter
  an invalid value.
  http://i46.Tinypic.com/29pup07.jpg
  
  you get this message if you have entered an invalid value
  http://i50.Tinypic.com/2wg6gj6.jpg
  
  After, I press (OK) in the alert message. How can I delete an incorrect value in the text element
  I tried the clear_form in the trigger for the error, but I get the error
  http://i50.Tinypic.com/1znue1l.jpg
  
  Please show me how I can delete the text without error element
  
  any help or advice, that I enjoyed
  
  Thank you

  Hello

  Just use the following to clear the value of a text element:

   :block_name.field_name := NULL; 
  

  I hope this helps.

  Best regards

  Arif Khadas

• Clear the contents of a form after the presentation

  Hello, all. I apologize for this question as "stupid", but I have been away from coding for a while and just can't find a sample of my earlier work on how to solve this problem.
  
  I just build a form that works well, but I want to erase the content when a visitor submits so the next visitor will see a nice empty shape. I put a 'Clear form' button with the button 'Submit' on the page, but I'm worried about the privacy of the visitor and want their information deleted when they hit 'Submit' and send me their information in an e-mail message.
  
  I remember a piece of code you put in another < body > or < do > tag vaguely and I've tried several things, I found in the old files, but nothing works.
  
  Thanks in advance to put me on the right track.

  I know what you mean.
  What some presses the back button, their browser displays the form page with
  the details that they always informed here.

  This is a form that a user will submit several times?
  As a form of data entry for a single user to use again and again?

  so simple fix, put a "reset" button at the top of the form for them to use
  to manually delete data.

  other corrections would be with JavaScript to clear all form fields onload
  perhaps.
  http://www.Google.com/search?hl=en&ie=ISO-8859-1&q=JavaScript+clear+all+form
  + fields

  or that the form of the page a cfm page and the browser is probably not hiding the
  form field content.

  --
  Alan
  Adobe Community Expert, dreamweaver

  http://www.Adobe.com/communities/experts/

• Text field increment number of legend - does not correctly load after the backup

  I am trying to create a field of dynamic legend who will be essential are text fields look like a list.  Initially, I searched on how to do this.  I finally found a way to do it, and it is simply to count the number of instances of the text field I and set the value of the legend:

  var curObject = prospectus.page1.step1.ObjectivesSubform.Objectives.instanceManager.count;
  prospectus. Page1.Step1.ObjectivesSubform.objectives [curObject-1]. Objective.Caption.Value text.value the Group concat (curObject, ":");

  And that helps my form works very well and the numbers to load fine in the form.  The problem I'm having is that after I save the form and reload, the figures date back to 1 for each text field.  Someone has an idea?

  * To test what I see, go to 'Objectives' and click Add target to create at least 2 additional text fields (so that you have at least 3 overall).  Save the form, and note that the numbers went from 1,2,3 to 1,1,3-triethoxyheptane.  It will be the same if you create any amount.  If you create 5 more it will go 1,1,1,1,5.  I'm puzzled.

  I think that it is related to the initialization of the form sub and how instance manager interprets the subshape County. The "count" on the instanceManager property is the current number of instances of the secondary form. When you add instances of the form in increments of 'count' and she is exposed as a sequential number incremented. However, after economy-close-open the form, the County is irrelevant until you add another instance.

  Try the 'instanceIndex' property and assigning the legend as follows:

  prospectus. Page1.Step1.ObjectivesSubform.objectives.objective::Initialize - (JavaScript, client)

  var CNT = Objectives.instanceIndex + 1;
  xfa.resolveNode("Objectives.Objective.caption.value.#text").value = cnt + ":";

  Steve

  PLEASE NOTE ON THIS FORM, I HAVE NOT HAD A CHANCE TO WATCH, THERE ARE PROBLEMS.