Changes in the size of a footer in a model

Similar Questions

• In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6.

  In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6. It was very useful and should be added to version 6.

  https://support.Mozilla.com/en-us/KB/how-do-i-customize-toolbars

  If you mean the - and + Zoom control so it is always there in Firefox 6.0

  or
  View-> Zoom

  Edit: I see that you are using Windows 7 where the menu bar is hidden as a Firefox orange button by default. Some menus objects much may not be visible in the menu of the Firefox button. Show the Menu bar or use the - and + Zoom controls buttons.

• 2 questions - run as administriator & change in the size of the text

  Hi all!

  I've developed software with CVI, could you please answer 2 questions?

  1. when I install on other computers, the text messages different looks (the police expanded) and in my computer, it seems. I think that happens when you choose to change the text size in windows thorugh: Panel-> apperance and customizations-> medium(125%)/large(150%) instead of hail (default 100%). Prevent the change in the size of the text in the panels?

  2. on other computers the software could not create a file for writing, unless a throw with the option "Run as administriator". Why?

  I hope you understood my questions, thank you!

  Depending on the size of the text is concerned, if you do not use one of the metafonts predefined for your labels and the text of the control, you shouldn't have this problem. The metafonts are designed to take on the characteristics (in size and style), the default settings of the computer where you run your program. Furthermore, by default, all new controls that you create using one of these metafonts, specifically NIDialogMetaFont, which is an alias for a variable size font which can become more or less important depending on the settings of the computer.

  To avoid this, you can change melting completely to something else (Arial, etc.), or you can even keep the same font, but make sure that you choose a different size that will result by it is not not the metafont predefined. For example, in my computer, if I use the point size 11, I use the metafont. But if I change the size of point to something else, then I don't want to, and that its size in points then remains the same in any computer.

  Size 11 (metafont):

  

  Size 12 (no metafont):

  

• "Change only the size of the text" greyed out

  I want to change the size of the text only in windows 8. When I go to control panel/display option 'Change only the size of the text' dialog boxes are grayed out.  Can someone tell me how to solve this problem?

  Hello

  You can see this thread dealing with the same type of problem:

  Change the size of the text only does not work

  Note:

  After my research I find that if we choose smaller screen, which is the default (100%) under change the size of all the elements , then the options for "Change only the size of the text" is not grayed out, if we select medium or large, then the option is grayed out.

  Check if you are using the smaller screen under change the size of all the items and then try to change the "Only change the size of the text".

  You may also refer to this article to check if it helps:

  Make the text on the screen larger or smaller

  Please let us know if you have any concerns about Windows.

• How to save the changes to the size of the text

  How to save text size increases. The zoom feature will return to the previous setting when I change web page. I wasn't able to change the size of the font using the font setting in the Tools tab.

  You can use an add-on to set the zoom level for all sites. For example, NoSquint and Default FullZoom Level.

• about the change in the size of the Panel and the window centerlize

  Hello

  I have a simple Subvi, there a string indicator embeded in the Panel. I have the string correspond to the pane. I will change the size of the Panel width 240 and height 24 then centerlize the Panel. I found a code in the forum. If I am not there in the chain, the code works perfectly. But after the string, it will run in the error.

  

  And I call the Subvi FP.vi in a main vi (main.vi).  The error is

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Error 1 has occurred to the property node (arg 1) in FP.vi-> main

   

  Possible reason (s):
  

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.

  Property name: Front Panel windowlimits of anel

   

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------
  

  Any suggestions why this error?
  

  I don't see a reference to the Subvi FP in your image.  You must have a reference of VI in the public Service. PanelBounds property node.

• How can I restore changes to the size of the screen, so that the items do not extend off the screen?

  Original title: solution of "Screen Resolution"?

  How can I cancel a change to the 'screen Resolution' in option 'View' in the 'Control Panel' to decrease the size of the "text boxes", which extend beyond the screen of the monitor if the adjustment slider is off the screen?

  I suggest you take your question to the appropriate forum. This forum is for feedback on the site Microsoft Answers itself.

  Windows 7: http://answers.microsoft.com/en-us/windows/forum/windows_7
  Windows Vista: http://answers.microsoft.com/en-us/windows/forum/windows_vista
  Windows XP: http://answers.microsoft.com/en-us/windows/forum/windows_xp

• Why isn't the DPI scaling screen do not accept any change in the size of the font?

  The graduation of DPI on my VISTA system is a custom of 144 DPI set that is too large for my monitor. However VISTA won't let me change the setting. Whenever I have manually change the setting, and then restart the computer, the police will remain the same size. When I return to the DPI screen, it always shows the size of the font as 144 DPI. How can I get the computer to accept my changes?

  I did a scan of virus from the system using Kaspersky w / updated virus definitions, but it showed no infection.

  Recently, I ran a Scan Registry program. It MAY have deleted a file required to run this application correctly. Any thoughts?

  Hello

  You should never use Registry cleaners.

  They can do more harm than any good as they can claim to be able to do.

  Do a system restore before you have run the registry cleaner, then try change DPI.

  http://bertk.MVPs.org/html/restoresysv.html

  «How to set the DPI Scaling in Windows Vista»

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-text-on-your-screen-larger-or-smaller

  See you soon.

• DVD, it tells me to try color change or the size of the screen and I don't know how

  How to change the color or size of the screen

  It is not best to ask the same question twice.

  However-

  "change the size of the screen..." - I think it means that you need to change your screen-resolution http://windows.microsoft.com/en-GB/windows7/Change-your-screen-resolution Note - the method varies slightly if you have W7 Starter.

  'change color' - perhaps the color depth? -http://windows.microsoft.com/en-us/windows7/Getting-the-best-display-on-your-monitor and read the sections entitled "Putting the color to a LCD (CRT) monitor", select "true color" as a test of startup.

  Or may be a little more specific.

• How does a change in the size of a pane with button only?

  Original title:

  Change the size of the pane with Touch

  Greetings.  I have several non-metropolitan apps running on my tablet.  I can't find a way to change the size of a pane in a multi-pane application.  With a mouse, you fly over just a limit of component, the cursor becomes a <-->and can be slid to the desired size.  How it accomplishes that affects only?  Thank you.

  You can do this with the touch, but given that the program was designed for a mouse pointer, it is INCREDIBLY difficult to press your finger on this tiny spot of 1 pixel to set it off.  That's a big reason why the modern apps for touch have a new programming framework for development, because the apps that are not programmed to it are almost impossible to use with a finger.

• Adobe Muse before and after changes in the size of the Widget by itself

  Hello everyone. I started learning Adobe Muse and so far I like it a lot. I downloaded a free Adobe Muse of https://musefree.com/before-after-slider widget

  I seem to have a problem with this widget because it continues to change my size of the specified object by adding pixels. If someone could help me with this, I would be very grateful.

  Here's a screenshot of my Page Properties window. The images, I try to combine for the front / after comparison have a ratio of 2:1.

  

  After that specifying the size of the widget in the transformation Panel and pressing on enter, the pitch changes automatically on 654 pixels for the widget and height Minimum of Page. I am struggling to understand why this is happening. I tried the width and the height of blocking, but I always get the same result. I'm relatively new to Muse, so maybe I'm doing something wrong? Maybe that's a problem of widget? How can I ensure that the object remains in a 2:1 ratio?

  

  I use Adobe Muse CC 2015 on a Windows 8, 64-bit machine. Thanks in advance for any help.

  Best regards
  Vahe

  I don't think that you will be able to use such a thing on Behance. You must validate as two separate files. You may want to confirm that by asking on the forums of Behance.

  Behance

• canvas size changes with the size of the image

  I am just placing several small pictures on a postcard.  When I go to change the size of the image, it narrows the whole canvas.

  Is there some sort of setting I need to uncheck?  I don't do anything with the size of the canvas.  I want it to stay the same.

  Thank you

  As nickna12 said, if the resolution of the picture you want to insert in the model is less than the resolution of the model, it will be re-size to fit the resolution of the new location.

  To insert images without having to worry about the size or resolution: insert images into the postcard file, each on a separate layer and transform each layer in dynamic object (right click on the layer containing each picture and select convert to smart object). In this way, you can resize images from top to bottom and upward once again without worrying about degrading image quality.  On each layer, use the recommended that Noel command (Edit - transform - scale or Edit - free transform) to re - scale each image as you wish. You can use the move tool (black arrow) to move each image in place.

  

  If you want to "away from the cultures' parts of the inserted picture, you can do so with a layer mask.  One way to do that is:

  • Select the layer with the image that you want to "crop".
  • Add a layer mask: layer - layer mask - reveal all the (adds a layer mask filled with white, so that you can always see your image)
  • Select the layer mask in the layers panel
  • Use a tool like the rectangular selection tool to select the part of your image that you wish to be visible.
  • Invert the selection: Select - Inverse. This selects everything except the part of the image you want to remain visible.
  • Fill the selection with black to hide it away: Edit - fill - (select black as the fill color)
  • Get rid of the selection: select - deselect

  

  You can use the move tool to move your image hidden anywhere you want on your postcard.  If you decide you want it is larger or smaller, you can use the Edit - Transform command to resize it, rotate, etc.

  In Photoshop, there are always several ways to accomplish tasks, and there may be better ways to achieve this way

• Changes in the size of layer duplication

  I have an image resized to 1 "x 1". I create a new document, 8.5 "x 11" and duplicate the image of 1 "x" 1 to the new document. Why when I do that the image changes to something other than 1 "x 1"?

  Is that 1 x 1 "photo cropped with the crop tool? Do you have the specified resolution px / in when cropping picture? If you use Image > Image size then check the resolution of the image that you duplicate. In order to get the image 1x1in 8.5 x11in (I guess it's 300px / in) documenting your 1x1in must be set to 300px / image.

• POF: Index Impact of change on the size/Performance

  Let's say I have a POF object with 2 properties. Change of PofIndex of the second property say 200 (starting from 1) will increase size or time serialization/desirialization/reading for filtering, pofextracting, etc. of this object in the cache?
  
  Say that we traded with:
  
  setTradeID (reader.readString (0));
  setTradeLabel (reader.readInt (1));
  
  writer.writeString (0, getTradeID());
  writer.writeInt (1, getTradeLabel());
  
  And considering a change to:
  
  setTradeID (reader.readString (0));
  setTradeLabel (reader.readInt (200));
  
  writer.writeString (0, getTradeID());
  writer.writeInt (200, getTradeLabel());
  
  (PIF - POF section was not particularly clear about this, it involves only non-contiguos indexes can be used http://docs.oracle.com/cd/E18686_01/coh.37/e18677/appendix_pifpof.htm.)

  Hello

  I could say the numbers you are using make little or no difference to normal serialization or deserialization. Where there is a very slight impact is where you have a class that has say a reasonable number of fields, using an extractor of POF, it is very slightly more fast to extract fields with ID POF values lower than fields with values higher then a POF Extractor walks on fields until he finds one he wants - it does not matter what the numbers are.

  JK

• Change suddenly the size of the font, now it is almost too small to read

  Three of the four days there all fonts in any related windows, including Microsoft Office program has become so tiny as to be unreadable. I use Google and Firefox, but it seems not exclusive online. Searching through all the Q and R, but could not find resolution. What could have happened and how can I fix.   Really need help ASAP

  In the Office programs or Web sites, you can hold down Ctrl on your keyboard while rolling the scroll of your mouse wheel to change the change.

  Try to open an Office program or the Web site, click on the inside, then hold down the Ctrl key while scrolling to see if that helps.