In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6.

Similar Questions

• My screen display options box continues to appear without pushing me anything, it appears and begins to go through the options in itself?

  My screen display options box continues to appear without pushing me anything, it appears and begins to go through the options in itself?

  Hello

  It could be hardware or software related. You can view these methods:

   

  Method 1.
  Computers get slower for various reasons: files become disorganized, unnecessary software consumes resources, readers of network unused slow start or too many programs run automatically at startup. Larger, serious questions can dramatically too slow down your computer's performance. You may have a virus or have need troubleshoot clean start.

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.

  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  
  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.
   
  Method 2.

  Also, check out the steps that are listed in the articles below and check.
  How to set performance options in Windows XP
  http://support.Microsoft.com/kb/308417

  Restore the performance of your computer with Windows XP
  http://www.Microsoft.com/windowsxp/using/Setup/expert/northrup_restoreperf.mspx

• I used the functionality of bookmark successfully for some time, however, just reciently I can't locate the function 'organize bookmarks '. It seems to be missing from the usual list of options.

  Have been using Firefox Bookmarks for awhile. Just noticed recently when I open the bookmarks that everything is there except the option to 'Organize Favorites '. I tried to rename a folder, but two names - organize bookmarks is missing from the top of the list.
  Is this good, unusual or the result of a virus or what?
  Should I reinstall Foxfire. I don't want to lose all the files.
  Appreciate any advice. THX

  In the Firefox Orange button > bookmarks > show all bookmarks > organize etc.

• "Please install the System86.dll file that is missing from the computer" during the installation of games

  Original title: "System86.dll"

  I'm having a problem during the installation of 3D games in window 7 ultimate

  Error code is: System86.dll

  I was using Window 7 Ultimate for a while, before a few days ago, when I tried to install the game in 3D (prince of Samuel), during installation, he gave me the message"Please install the file System86.dll which is missing from the computer" (sorry if my text is false I forgot the wording).

  Now, let me tell you what I did before: -.

  • I tried to restore my window
  • I sccaned my PC all a care as well as the microsoft essential security
  • What are malicious files had been found by Anti virus, they have all been deleted

  Can someone tell me how to get in touch with the support of microsoft agent?

  Thank you for reading my message, your response would be appreciated

  Take care of your self!

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/d08707ca-D670-4dae-9E12-5936ef6fb486

  If your version of win has pre-installed support is done by the manufacturer of your PC, MS, other support that the critical updates, is paid for request for assistance, unless you have a commercial version of victory

• Navigation bar seems to be missing from the tree view

  Hello
  
  In the view of component (classic), in the column of the shared components, there is a section called Navigation bar. This section seems to be missing in the new tree view (at least in the component column shared). Is located somewhere else in this point of view, or is this a bug of omission?
  
  Thank you
  Arie.
  
  -------------------------------------------------------
  & diams; Be sure to mark the appropriate fix/useful messages. For the long term, it will benefit us all.
  
  & diams; Author of Oracle Application Express 3.2 - the essential and more

  Hi Arie,

  (1) is missing from the new Navigation bar tree

  This is the intention, because the Navigation bar has really nothing to do with the page and it's the same for all pages is why we decided to not to show more in the new tree to reduce clutter on the screen.

  (2) have you checked your "Navigation Bar Entry" model in your page template. It contains placeholders for the image?

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• File/s of origin Vista seems to be missing from the windows folder

  I have may have removed the OrbiCam files from theWindows system folder by mistake. Can 'FixIt' check and fix for lack of system files/folders?

  I have may have removed the OrbiCam files from theWindows system folder by mistake. Can 'FixIt' check and fix for lack of system files/folders?

  Hé adadu

  read the information on the sfc/scannow command. Difficulty missing or corrupt file system at the microsoft below link

  http://support.Microsoft.com/kb/929833

  Walter, the time zone traveller

• Photoshop CS5, I get the message: some application components are missing from the Application directory, please reinstall the application.

  Trying to open Photoshop CS5 I get the following Message: among application components are missing from the Application directory, please reinstall the application.

  Can I get these downloaded components that my optical drive is broken.

  Download the CS5 products

• There is a configuration option that allows the parallel execution of sub vi?

  I'm trying to run a vi in teststand has two parallel execution paths. A path under vi implements the trigger and wait for data from a module scope, while in the other lane, I'm starting a power supply. The power waits until the scope is armed and runs.

  It works as a standalone vi. When I try to run this vi in teststand he works the first vi scope and then runs the power supply. Of course vi opportunities get to expiration and outputs and data are not met.

  I tried a number of methods of synchronization, and although they seem to work standalone, as soon as I try them in Testsatnd I have this problem.

  I am new to teststand and I was wondering if there is some configuration config I missed which allows a vi like this to run as he's independent.

  I have a number of simple screws that run as planned, but this one left me speechless.

  I had to split these screws but would really prefer to have them in the same vi.

  (The latest versions of teststand and Labview running)

  Henry

  hkroker,

  It is a known problem. Please refer to the following KB to help solve your problem.

  - Parallel blocks run sequentially why does my LabVIEW VI when it is called from TestStand?

  Concerning

  Anand jegou

  National Instruments

• Color LaserJet M277dw: Purchase a new ejection M277dw impossible drawer which allows to change the toner cartridges

  I found a large detachment (M277dw - drawer Toner at corner), and I stopped by Office Depot and looked at their floor model.

  Their floor model tray down (gravity only) and the blue lever allows the toner tray slide.

  My device behavior is different.  Tray (manual feed) must be forced to land (about 3 pounds worth), and I noticed that the drawer tonor dates back to about one-tenth of an inch.  As noted in the other post right has a notch that moves (mine moves like the store model).  And if we try to shoot with the blue of the lever down (right side tab moved and is clear.  "It seems that he should leave the Board move), the left will not come loose.  If one pull with approximately 10-15 kg of force (firm but not crazy hard) I can see the right side to move slightly but not on the left side.  He feels that the left side is stuck. The movement of the drawer Assembly seems a bit odd and may be the reason why try it manual power resisting decline.

  Is there a transport screw that I missed?  Nothing in the instructions to the browsers screw in place.

  Any recommendations?

  I returned the printer m277dw to Office Depot and applied the credit to m477fnw.  A m277dw of replacement was not in stock, and the m477fnw fits my needs better. If this proved to be a win-win for me.  Office Depot requires the original box and the Office Depot a proof of purchase to return (I got both).  Office Depot was not easy to work with.

• The overview of brush (red) is missing from my rush when changing the size. hardness with Alt/RightClick.

  I found the solution in another thread here, there is a switch, to shooting noticed or not, at the bottom og the Panel shape preset. Unfortunately, mine is grayed out. I'm sure it's my fault and I must somehow have it turned off, but that was not intentional.

  I have no CapsLk

  THN

  What are your preferences > performance > settings of the GPU?

• Error: could not resolve the start-time. Results data missing from one or more time on clients not synchronized *.wrf files

  Hello again!

  After my last fight with a problem, I managed to muttle thanks to this all the way until the end, and once again, I am confused!

  My reference path, running without errors now, but when I get my results, there is a mistake in it.  I've seen other discussions on the same error and tried their suggestions, but to no avail.

  I have attached my results to see if maybe someone can see something I'm not, or perhaps to suggest solutions to the problems.

  Any help, as always, is greatly appreciated.

  Thank you!

  Matt

  The problem is with java on your customers, not the VM workload. Customers are initially charge against workload VMs using java applications (for Olio and ensures it is).

• Mail problem - there is no 'other' option to allow me to add an e-mail letter from BT to my apple mail

  I try to get my BT mail via my icon of mail from apple on the desktop, but there is no option 'other' to allow me to do this - why?

  Unless I have a Facebook, Yahoo, Google, etc related mail account there is no possibility to do same not the symbol more only allows me to select it to give me the option. BT themselves aren't interested, claiming that they cannot be experts in all operating systems. The last time I looked only there's two major operating systems, so not much to get an expert in.

  Is - this BT internet you speak here?

  I guess you can set up a new account in mail preferences, you can either have POP3 or IMAP

  for imap, it is mail.btinternet.com, Port, 993, SSL encryption and punch in your user name and password

  for pop3, this is the same server, port 995, punch in your user name and password. Under the apple mail program, go to accounts, choose the type of account (POP3 or IMAP) then set up and you could be good

  Good luck

  John b

• Call the procedure this file download, but not from the URL

  Hello
  
  Oracle 11g, Apex 4.1.1.00.23.
  
  I have a procedure that generates a CSV of a query (BLOB). The query uses the apex collections.
  As it seems impossible to use collections of the apex outside Apex, I can't call this procedure from the URL to download the file (the query fails).
  
  How can I call my procedure on click of a button, without reloading the page, and without calling the URL ?
  
  I have some ideas like the creation of a new page, with a conditional header process that calls my procedure to download the file, then call it in a popup, etc... but I need a simple solution...
  
  Thank you.
  
  Yann.
  
  PS: actually, I need the same functionality when you change a process, let us say a process page, in the source attribute, you link < police = "courier" > [Download Source] < / font >, this link simply calls < police = "courier" > javascript:doSubmit('DOWNLOAD') < / font >, but it seems that the page is not reloaded. That's exactly what I need, it does not call for any procedure in the URL, and it does not reload the page.

  Use an application process. These run in the security model for APEX, including the use of the collections.

• Cannot install Flash Builder 4; Failed to retrieve the latest versions

  I am Windows 7 64 bit on a network where my Documents and my office are related to a roaming profile are applied where the quotas for the use of space. I was unable to install Flash Builder 4 because of this issue, which Adobe is known and apparently corrected (thanks, Chris A.).

  However, I can't even extract Burrito or the FB4.5 draft because the installation exe retrieved automatically on the desktop. Under 4.0, I could change the extraction location.

  Is there a way around this problem?

  Thank you

  Ron

  @Ron - Thanks for letting us know. I'm surprised that anyone encountered this limitation before today.

  Fortunately, there is a solution:

  -Open a command window and cd to the location of the downloaded self-extracting exe file

  -Run the exe with the/d (destination) option, which allows you to adapt the path where the installation program is extracted.

  In my case, the chain of syntax full looked this way:

  FlashBuilder_4_5_LS10.exe /d c:\customExtractionFolder

  -Chris

• My product activation code is now missing from the computer and I recently received a message that my computer is not running genuine Windows.

  I recently received a message that my computer is not running genuine Windows. The product activation code is now missing from the computer. I had the computer for two years and I'm a product of the case but no way Code to enter as there is no "Acivate Windows option available". In addition, just slui.exe tells me that he didn't and to communicate with the gateway manufacturer. Any suggestions?

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc0000022
  Windows product key: *-* - WJ2H8 - R6B6D-7QJB7
  The Windows Product Key hash: ckKNc + BBPDWmo1LUlOkraNjlQ34 =
  Windows product ID: 00359-OEM-8992687-00006
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {131481F2-8F22-45C4-AB3C-790AED5B7081} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.110622 - 1506
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Users\Kevin\AppData\Local\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {131481F2-8F22-45C4-AB3C-790AED5B7081}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-7QJB700359-OEM-8992687-000062S-1-5-21-619933626-1398643452-1551818003GatewaySX2851American Megatrends Inc.. P01-A0 20101116000000.000000 + 000CCB23507018400FC04090409Eastern Standard Time(GMT-05:00)03ACRSYSACRPRDCT100100Microsoft Office Enterprise 200712ywReFrpiwGS5KjJd3wYnxyLIKEE =89388-707-4551751-6501614 3CD066791E2A586

  Content Spsys.log: 0 x 80070002

  License data-->
  On a computer running Microsoft Windows non-core, run ' slui.exe 0x2a 0 x 80070426' to display the error text. "
  Error: 0x80070426

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0 x 0001000000000000
  Event timestamp: 9:25:2011 15:31
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered Service: sppsvc

  --> HWID data
  Current HWID hash: MAAAAAEAAQABAAIAAAABAAAAAwABAAEA6GFEEqg3RLFazIA5mCewUIycXq0YOVxd

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC ACRSYS APIC1334
  FACP ACRSYS FACP1334
  HPET ACRSYS OEMHPET
  MCFG ACRSYS OEMMCFG
  SLIC ACRSYS ACRPRDCT
  LASRYVITRAGE ACRSYS OEMB1334
  GSCI ACRSYS GMCHSCI
  AWMI ACRSYS OEMB1334
  SSDT DpgPmm CpuPm

  Noel,.

  Thank you I enjoyed your attention and your support.

  I called and Microsoft went through basically the same things that you suggested.

  We did a system restore (at an earlier date) and fortunately he fixed itrself. I'm good to go.

  Who knows why it happened.

  Kevin