Changes made to files not appearing edd does not in DITA 1.2 applications

Similar Questions

• Changes made in a symbol appear in another

  I have a symbol called "a". I needed 2 copies, so I duplicated A and renamed the new symbol to B. I have now have A and B, identical copies of each other.

  I've sailed inside the symbol A where I entered another symbol, 'A1 '. Inside > A1, I removed an image and added another image. No problems so far.

  Then, I returned on the stage and sailed in the symbol B > B1. To my surprise, the same image change, I did has > A1 already appeared in B > B1 (even though I duplicated A * before * this change).

  When I change the image inside B > B1, this same change is this back to A > A1.

  It's as if these two symbols, A and B, are mirrors of each other, even after modification. Problem is, I don't want mirrors. I need that they are slightly different.

  I thought that duplicate stage may be my problem. I started on (by unscrewing several steps and by closing and by creating a new document entirely). This time, I copied A and stuck on the scene. I came across the same problems.

  OK, then guess: this time, I went in a symbol and copied its elements/sub-symboles. I went back to the scene and they stuck here. Selected items/symbols and converted into a new symbol. Same problem!

  I'm puzzled. I * really * don't want to recreate each element/sub-symbole. There are many of them, and it would be very tedious. Please help me to avoid this!

  You need to duplicate symbols in the library not in the assets Panel. This way you can modify them as you wish.

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• When I use Firefox to watch the changes I make to the HTML files locally, it does not show changes made to images, unless I restart the browser. Is this a bug?

  I have the local and versions at distance of a page is open in two tabs. I change images (keeping the same name in the HTML code) and download the modified image. The tab that displays the remote page does a refresh to show the change. The tab showing the local page of do not. I tried to open it in a new window, but it still doesn't change. Only if I restart Firefox does show the change. Why? Is this a bug?

  Try using Ctrl-Shift-R or Ctrl-F5 to reload the page. This tells Firefox to reload all the content on the page, ignoring cached assets copies.

  I don't know why this is happening in the first place, although I suspect it may have something to do with the fact that the remote copy is loaded from a web server (including a bunch of headers allowing browsers to know when we need to get a new copy of an asset), while the local copy is loaded directly into the file system.

• changes made to the code do not appear in the file swf, even trace instructions not.

  I just picked up a clients flex project and I can't get the app to reflect even a simple statement trace.

  Before that I took over, the project was built last successfully with the environment/sdk Flash Builder Beta 2. I have the latest version of Flash Builder 4.

  To import the project into FB4, I get a ton of errors.  Most of them, mainly because of changes made to the beta2 sdk for free.

  Some of the things that I fixed:

  -mx to library://ns.adobe.com/flex/mx library://ns.adobe.com/flex/halo namespace

  -player video count: many names of the State for the video player component had been changed, more correctly States had been added.  There are also other related component video and property names that needed to be updated.

  But I have corrected this and the application is finally able to compile (but with a few caveats the type of variable in double especially)

  The only thing is now that any change I make to the project is not reflected in the build (debug or release).  I have changed the existing traces, added additional traces. Nothing is displayed.  I even removed the applicationComplete property in the main.mxml.  Still, everything worked as nothing has changed.

  Also I can't debug the application.  Whenever I try to debug... Flash builder said... "Swf application contains no debug information required...". "

  Anyone has any idea how to even begin to tackle this? Any help or pointers would be greatly appreciated.

  Hello

  Have you tried to project-> 'clean' the project?

  Also, instead of wasting more time with the import, I try and create a new project in FB 4 and copy all the code sorce and assets in the new project. Flex 2 has been a long time ago.

  Mike

• SE message: changes made to this photo has not been saved. The file may be read-only or you are not allowed to check-in at the location of the photo, trying to crop an image, or mount it

  Original title: photos

  If I try to crop a photo or repair, it has a message of: changes made to this photo has not been saved. The file may be read-only or you may not save to the location of the image.

  They worked very well the other day, what's past?

  Hi boneyardwolf,

  1. where are the photos?

  2. you have any third-party photo editing software?

  3. what type of files you want to change?

  You can check the following link and try the steps suggested by Marilyn - Support Engineer Moderator Wednesday, March 4, 2009 04:47 and see if it helps to solve the problem

  http://social.answers.Microsoft.com/forums/en-us/vistapictures/thread/9f6bf1f8-50EC-4baa-b2c5-212c823ded68

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Setup could not initialize - I've lost hours trying to find solutions online and forum... to change the file to add .old - does not work; Open the file 2/2 still didn't work... Help!

  Setup could not initialize - I've lost hours trying to find solutions online and forum... to change the file to add .old - does not work; Open the file 2/2 still didn't work... Help!

  Please see the links below:

  https://forums.Adobe.com/thread/1848277

  https://forums.Adobe.com/thread/2055767

  Let us know, if you still get the same error even after trying it all the steps mentioned

• The name of the file in offline mode does not appear.

  For a while after the first pro start, it shows me the message that I currently have out material, but it shows me what material is in offline mode. The name of the file does not appear. Does anyone know why? I always start the project and then find the file that it was.

  I work with CS 6 and OS X 10.11.

  Open the display of metadata and properties in offline mode to find easily in the project window.

• Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  If lr crashes repeatedly, reset preferences.   http://www.lightroomforums.NET/showthread.php?14226-resetting-%28or-trashing-%29-the-light file-Preferences-room

• I have 9, 1 pages in PDF files that are accessible and the need to combine them into 1 PDF file.  I tried adding, adding and the combine process of PDF files. The file created does not take my changes. The file created is partially accessible, but I have

  I have 9, 1 pages in PDF files that are accessible and the need to combine them into 1 PDF file.  I tried adding, adding and the combine process of PDF files. The file created does not take my changes. The file created is partially accessible, but I have to re - the problems that I had fixed in the unique files. I need suggestions on what else can be done, if any. Using Acrobat pro XI.

  By habit, I tend to combine PDF files in the Page pane by right-clicking thumbnails then 'Insert of Pages'-> 'From File'. For me, this preserves the tags of these two documents, although the tags may have to be moved to the correct location (if I remember correctly the tags for inserted pages are put at the end of the tag structure, regardless of where the pages are inserted), if I put the tags in the document to insert into a container as a Section tag It makes the process easier. Travel set of tags in the right place is the only re-fixing that I remember having to do. What behavior you encounter?

  a 'C' student

• Windows 7 Ultimate: Explorer is not refreshed after deleting a file, the deleted file still appears in the window, on the manual "Refresh" the file is deleted

  Windows 7 Ultimate: Explorer is not refreshed after deleting a file, the deleted file still appears in the window, on the manual "Refresh" the file is deleted.

  I have also changed the CLASSID HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\ {BDEADE7F-C265-11D0-BCED-00A0C90AB50F} / instance DontRefresh value to 0

  Hello

  (1) have you made changes before the start of this issue?

  (2) what happens when you try to start in safe mode?

  To start your computer in safe mode, you can see the link below:

  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  I suggest you to place the computer in a clean boot state and check if the problem is resolved:

  1. sign the computer by using an account with administrator rights.

  2. click on Start, type msconfig.exe in the Start Search box and press ENTER to start The System Configuration utility. If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  3. on the general tab, click Selective startup, and then click on to clear the load startup items check box. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the hide all Microsoft services check box, and then all disable.

  5. click OKand then click restart.

  6. check if you still have the problem.

  See the link below for more details:

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual after you have finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start , type msconfig.exe in the Start Search box and press ENTER.

  1. If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click restart.

  If this does not work, try to run a SFC scan. To do a SFC scan follow the steps below:

  Use the System File Checker tool, which is also called scan SFC.

  File system (CFS) auditor verifies that all Vista system files are where they should be as they are by default and not corrupted, changed or damaged.

  1. click on Start, click principally made programs, Accessories, right-click on command promptand select Run as Administrator.

  2. click on continue or provide administrator credentials if prompted.

  3. in the command prompt window , type the following, and then press ENTER:

  sfc/scannow

  4. you should see messages on the screen the following:

  From the analysis of the system. This process will take time.

  Start of the phase of verification of the scanning system.

  % Of verification complete.

  5. once scanning is complete, check to see if the problem you are experiencing is resolved or not.

  Hope the helps of information.

• How to fix: Page Template styles do not respond to changes in CSS files in the text editor of 'Developing' Admin Console

  I bought a model site.  It has a css file, /styles/screen.css

  It also has a template page 'home' with the link to the style sheet within the < head > section:

  "< link href="/styles/screen.css "rel ="stylesheet"type =" text/css"media ="screen"> < / link >

  I am tempted to change screen.css, by editing the file in the 'Develop' administration Console and pressing the 'Save' button on the file when changes are made.

  However, the changes do not appear in the preview of the Page template.

  However, if I do a < style > section in the head <>of the page template and put the change, it displays correctly.

  It's like the Page template does not recognize changes to the screen.css.

  I press "Save draft" and "Update" before you press 'Preview' to check for changes.

  My question is how to fix the Page Template styles that do not respond to changes in CSS files in the text editor of 'Developing' administration Console.

  I am a new user of BC and I agree it is likely a result of not knowing how the css BC.

  Thanks in advance for any assistance with my issue!

  Hello

  I think that you too complicate the thinking problem that BC is a non-standard way of processing applications to a css file. This looks more like a cache or perhaps a code problem. However, I would be happy to take a look at your code and see if I can remember where is the problem. Try Skype me and screen-sharing and I'll see what I can do. It is probably fixed quickly :-) My ID:s 'noviumdesign '.

  Anton

• Changing the settings to default print with CUPS still does not work, regardless of the application

  Hello, I looked through a number of positions on the definition of default printer in a Mac, but nothing solve my specific problem. I recently spent a PC to a MacBook Pro, just updated to Mountain Lion and installed my printer wireless, HP Deskjet F4500 Series, with the pilot chosen by my computer. The printer-computer connection usually works, but when I go into the CUPS and change the default settings for Fast Draft, n/b only, it does not apply when I print. I tried several times, making sure to save my default settings in CUPS (and indeed they appear here as Fast project, b & w only), but no matter which application print from - Safari, Chrome, text edit, etc.. - it prints in color and normal mode unless I manually selects the settings for that particular print job. This is especially a problem when printing things that are not pop up a print dialog, such as online coupons. I could easily change the settings of the default printer on my laptop and they apply to coupon print as well, but I'm having no luck with the Mac. Help, please! Thank you!

  Finally I got it solved!

  There are two options in Mountain Lion when you add the printer HP CM1415fn (Apple-> preferences-> Print & Scan system): "AirPrint" and "HP LaserJet CM1410 Series.

  So, with "AirPrint" set default CUPS Options has no effect, even if you change. PPD file.

  Fortunately, with the 'HP LaserJet CM1410 series' setting CUPS the default Options works well!

• When I try to delete some folders, an error message appears saying 'you need permission SYSTEM to make changes to this file.

  original title: require authorization of the SYSTEM

  I decided to do a clean install of the latest Windows 7 RC yesterday and today crossed and have started to remove some programs on a separate hard drive so I could reinstall their own.  However when I try to delete some folders, an error message appears saying 'you need permission SYSTEM to make changes to this file.  I am using an administrator account, but I can't just simply delete the file.  I tried going to and change the owner to my account or administrators, close it, change the security permissions to allow me to have full control, and then I can finally remove it.  The problem is, I have to do for all the files one by one in the folder, and I wonder if there is an easier way to go about this, or if I can access the user of this SYSTEM and just delete them all from there.  Thanks for the help.

  Hello

  Not trying to resurrect the old discussions, but I'll answer anyway because this thread came on top of the list of search results when I searched for "you need permission to the SYSTEM; I hope this will help everyone.

  Note: here, "the record" as a subject refers to the folder that you want to remove.

  Step 1: Go to the built-in Administrator account, you can do so by following these steps:
  a. go to control panel > system and security > administrative tools
  b. on the left panel, go to local users and groups > users. You should now see a list of users on your computer
  c. right click on the administrator account that appears in the list and select Properties
  d. uncheck "account is disabled" and confirm by pressing OK

  Step 2: Connect to your newly activated administrator account

  Step 3: Now, we start to configure the security settings that will allow you to remove this folder which was (perhaps) held by the SYSTEM:
  I'm going to make the assumption that you want to remove a folder and all its subfolders along
  a. right click on the folder
  b. go to the security on the top tab
  c. click on the Advanced button which is at the bottom

  : Step 4 the first part to configure security settings to set the owner of the folder:
  a. go to the owner on the top tab
  b. click the button change located downstairs
  c. There should be a list of accounts to choose to change the property, this is located under the label "of a change in ownership:'"
  (d) the entry 'Administrator (YOURCOMPUTERNAME\Administrator)' should be there; If this isn't the case, then add it to the list:
  -Click on the button "other users or groups...". "who's down
  -Under the label "enter the object name to select (examples):', there should be a text field you can type into it;" type in "Administrator" (without the quotes of course)
  -Click on the "Check names" button which is located on the right. 'Administrator (YOURCOMPUTERNAME\Administrator)' should now be there _For itself_; Well, if not, then you must remove the line that does not represent the administrator account that you are currently
  -Confirm by pressing OK; It will now appear on the list of accounts, you can choose from
  e. now, select 'Administrator (YOURCOMPUTERNAME\Administrator)' from this list
  f. check 'Replace the owner of subcontainers and objects' to propagate our change
  g. press OK to confirm. a message should now pop-up window, which says to re - open the properties. Do by pressing all the buttons OK see you

  Step 5: now that we have the owner of the folder, we still not done. There is one crucial step left which is to remove permissions inheritable:
  a. Repeat step 3 to learn to re - open properties and get to "Advanced security settings"
  b. go to the permissions on the top tab
  c. click on the button "Change permissions" which is down
  d. at the bottom, there should be 2 check boxes:
  -' Include the permissions that can be inherited from the parent to this object': deselect this. When you do so, you will get a warning on the parameters of parent is not not able to spread. Select 'Add '.
  -' Replace all permissions of child object with permissions inheritable this object': check this
  e. press OK to confirm. Windows will warn you this time; Click OK
  f. reconfirm by pressing OK; now, you should get to properties again

  Now, you shouldn't have all the warnings about the SYSTEM do give you permission as he attempted to perform actions on this issue.
  All the boxes to change the permissions on the accounts (properties > Security > Edit) must now be enabled, and you can tinker around with it.

• Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 80070003))

  I had to uninstall iTunes a few months ago and successfully re-installed, but part of my music was missing.   At one point, following the instructions on a thread on the forums Apple or Microsoft, I saved my music library on the desktop. Since then, I do not have a library of music on the desktop file.  In my looooooong hours trying to fix things, I do not know if I deleted it or what.

  Now, I get the message:

  "Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 8007003)) "whenever I have backup my computer.

  As I understand it, that does not affect really any other files, they rely on the spot (I think), but

  HOW CAN I GET RID OF THIS MESSAGE? or what is the cause?  Of course, I could use help in simple English, step by step, as I'm not very techno...

  Thank you!!!

  Try to be...

  SereneJulie

  Hi serene,

  Thanks for posting your query on the Microsoft Community.

  As indicated by the error, this problem appears, when these files/libraries that are saved automatically are not present on your computer. I suggest you to follow the steps below and check, if it can help solve the problem.

  • Create missing files that are listed in the error message.
  • Exclude files from the files to backup in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:
    1. In Control Panel, open backup and restore.
    2. In the section back up , click change settings.
    3. In the dialog box Configure the backup , click Next.
    4. In the dialog box that you want to save , click Let me choose, and then click Next.
    5. Expand data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .
    6. Expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.
    7. Click Next, and then click Save settings and exit.
    8. Backup and restore, click back up now to perform a new backup. The backup operation must complete without errors.

  If the problem persists, I suggest you follow the steps in the following article for troubleshooting backup problems.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455/en-us

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.