Setup could not initialize - I've lost hours trying to find solutions online and forum... to change the file to add .old - does not work; Open the file 2/2 still didn't work... Help!

Similar Questions

• When we install, we get massage: "we met the following problems. Setup could not initialize. This could be due to a missing file. Please download Adobe Support Advisor th detect the problem. "However, when we click on"Get Adobe Support Advisor.

  When we install, we get massage: "we met the following problems. Setup could not initialize. This could be due to a missing file. Please download Adobe Support Advisor detect the problem. "However, when we click on"Get Adobe Support Advisor. It is not to us to show how to solve the problem.

  Hello

  Please see failed to initialize the installation program

  "Installer initialization failed." I have tried everything what it but no dice.

  setup initialization failed

  I hope this helps!

• Setup could not initialize - DesignStandardCS5.5

  Hi all

  I'm trying to install Adobe Creative Design Standard on an iMAC OSX, running, but I still get the error that Setup could not initialize.

  I tried running the cleanuptools and rebooted, but nothing works.

  I called the Support technique Adobe but says to use the forums to get answers

  Can you help me

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• I have download CC and installed the trail of the illustrator of last week, but it disappears all of a sudden, he says that Setup could not initialize

  Hello. I have download CC and installed the trail of the illustrator of last week, but it disappears all of a sudden, I couldn't find it on my computer and I try to reinstall, but it says that Setup could not initialize. I use win8

  Please see the links below.

  • Error: "cannot install initialize | Windows
  • The Adobe CC Installer failed to initialize [windows OS]
  • Creative cloud Installer fails to boot into OSX Mavericks

  Hope this will help you.

  Kind regards

  Hervé Khare

• I bought adobe photoshop online 14 items. It will not install on my Win 8 64 bit machine. Setup could not initialize.

  Maybe it's a missing file. I tried everything on the support page. Do I have to re - download.

  Hey chigger

  Please see these topics

  Items 13 Setup could not initialize

  First Elements 13 - Installer fail to initialize

  Let us know if this helps

  Concerning

  ~ Assani

• Items 13 Setup could not initialize

  Items 13 Setup could not initialize

  Optimistic almond,

  Do you get any error messages? What operating system do you use?

  Here is information on the download items and links to the files:

  Photoshop elements 13, 12, 11, 10 | 9, 8, 7

  First items 13, 12, 11, 10 | 9

  Here are some links that can help with the installation, if elements:

  Photoshop elements help | Photoshop Elements learning & support

  Troubleshoot installation | Photoshop Elements, Elements first. Windows

  Troubleshoot installation | Photoshop Elements, Elements first. Mac OS

  Troubleshoot installation using newspapers | Elements

  Troubleshoot and resolve installation errors

  Guinot

• Setup could not initialize. That's happened?

  Just purchased Adobe CS6 Design & Web Premium (academic edition) installed.

  Setup could not initialize. Downloaded Adobe Support Advisor to detect the problem, but childless. That's happened? Please advise on how I can install the software.

  If you are using windows, right-click on the exe, and then click "Run as Administrator".

• CS6 InDesign trial download: "Setup could not initialize".

  Hi, I downloaded Adobe InDesign CS6 successfully, using the Download Manager software. When I click on "install", a window appears with a bar ('install Adobe'), progression and the bar gets about 2/3, then I get an error message saying "we met the following problems." Setup could not initialize. Please download Adobe Support Advisor to detect the problem. "Then a link to download Adobe Support Advisor, or button to quit.

  So, I downloaded and ran the Adobe Support Advisor. After initialization, the software only says "no problems found".

  -My machine meets the system reqs for InDesign CS6

  -Of course I tried to restart my computer and run all these steps again. We are still getting the error.

  Help, please! Thank you.

  Thank you, Jeff Wright. I went through my log files, searched errors and found another thread on the support forum that simply directed me to remove a process in my activity monitor.

  For anyone else who has this problem:

  Go to Applications / Utilities / on your mac activity monitor and delete the process "'AAM Update Notifier' or «AAM recording notify»» Then start Setup again. He now works for me.

  Thank you very much!

• Setup could not initialize. Installation PS Elements 10 for MacBook Air

  I try to install Photoshop Elements on my MacBook Air and I get the following error:

  Setup could not initialize. Please download Adobe Support Advisor to detect the problem.

  I did and he can not seem to find any problems.

  Help.

  I called in support last night because I'm impatient and expect better response times. I got the drive I had was damaged and I need to download the file. I expected at least to get a replacement disc, because I just bought the program. I was told that I have to pay to get the disc.

  This is so frustrating.

  I have at least had the operational programme.

  m1chall

• Error 25007 occurred during initialization Fusion.Setup could not load Fusion Load Library Shim0

  Error initializing fusion 25007occured. Setup could not load fusion with LoadLibraryShim0.Error:0 x 80131702... I get this error so that install NET FRAMEWORK 2.0 windows XP 32-bit Sp3 please help me

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Setup-error-25007-while-initializing-fusion-re-net/2dddf04c-bdfe-484B-a814-e20ffb444c00?tab=MoreHelp

  It will be useful.

• HP dv6 7214tx: windows Setup could not configure windows to run on this hardware

  Hello

  I know it has been posted similar problems before, but I still can't get on my instalation.

  I came to this point: during installation PROCESS, almost at the end of this message pop up "'WINDOWS Setup COULD NOT CONFIGURE WINDOWS TO RUN on THIS COMPUTER HARDWARE".

  My PC is: ENVY dv6 7214tx

  3rd gener. Intel Core i7-3630qm

  processor 2.4 GHz

  1 TB HARD DRIVE

  8192 MB DDR3 SDRAM

  Blu - ray optical drive

  Windows 8

  NVIDIA GeForce graphics card

  WLAN & Bluetooth

  I changed boot to the DVD - ROM option, SUPPORT of LEGACY enabled, disabled SECURE BOOT.

  What it might useful to you guys, it's the actual installation takes apx. 5 hours, then he came to the point of pop up window mentioned above.

  Do you have any suggestions please?

  Thank you very much

  .. .also even if this driver has been loaded to the top, another window pops up and says smth like "the driver is not signed, and it might not work.

  However, I let it install... I'll see

• DirectX on Windows 8 (64-bit) "your DirectX Runtime is up-to-date. Download and install this file from Microsoft. ""Setup could not download the file. Please try again later or check the connection to the network. »

  So I tried to get this to work at least for a day now, but whenever I try to launch my new game I'm away I kept getting this error: "your DirectX Runtime is up-to-date. Download and install this file from Microsoft. ' When I was re-directed I downloaded, it opens and clicks on agreed and all this things, but after 10 seconds initialization, it gave me this error: "Setup could not download the file. Please try again later or check the connection to the network. " I checked all that nothing seemed to be wrong, I did it again and again and again. So I just went to a solution or any news for DirectX. So far, no luck.

  I am running on DirectX 11 right now, is if there is a new DirectX or am I a jerk, and that is a different problem? I can't understand it.

  Thank you

  Hello

  Try this link... it's a complete Installer for DirectX Runtime June 2010... This is an optional package that use a lot of games...

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

  The file is self-extracting, so take note where extract you it to.

  Open the folder, and then double-click DXSETUP...

• HP Pavilion dv6-7028tx Enterta: Windows Setup could not configure windows to run on this hardware

  As I tried to reinstall win 7 on my laptop HP Pavilion dv6-7028tx, the competition, Enterta I received this message by win7 saying that «windows Setup could not configure windows on this computer hardwear»

  

  I did some research on this issue, it seems to be the lack of SATA drivers on my computer.

  Could you please tell me which intel SATA driver should I install to fix the problem?

  If this method does not work, then please can you me how to change the hard drive in AHCI or IDE BIOS setting?

  Thank you very much

  Hello:

  You cannot change the drive controller setting in the BIOS on any HP laptop consumers made in the last 5-6 years.

  See if it works...

  Download the drivers from this link below (first listed file - 64-bit).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx? AGR = Y & ProdId = 2101 & DwnldID = 23060 & keyword = Intel + Rapi...

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and support installation of W7 in the machine, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• Windows Setup could not configure windows to run on a hardware on this computer

  HP Pavilion Sleekbook 15-b023cl

  I tried to install Windows 7 on my computer for the last day and after several attempts the same error message. It is said: "Windows Setup could not configure windows to run on a hardware on this computer." How would I go about fixing this problem?

  Thank you

  Hello:

  I'm not sure that there is a 'one size fits all' answer to this problem, if you google the error.

  The most common solution is to try to install the SATA driver.

  Here is the link to the SATA drivers you need for your model. Download and extract to a usb flash drive.

  First file listed is for 64-bit operating systems.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=22194&ProdId=2101&lang=eng&OSVersion... =

  Use the Drive Options - Advanced method to install and then select the option load a driver.

  If you check the box, only the compatible SATA driver is selected.

  See if it works.

• Problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription) "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security /...

  Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)

  Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.

  Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.

  http://support.Microsoft.com/kb/834484