Changes on Transport Protocol under non-reflecting channels Params

Similar Questions

• Gel non - HD channels. Toshiba 32RL958

  If I turn on the TV in standby when you are set to one of the HD channels I find all non - HD channels are "frozen" which is just large blocks of color when I going turn it back on. Unplug all network solves problems, but clearly it shouldn't happen in the first place.

  Any ideas of cause or possible cure? Please don't suggest to contact technical support that they were all as serve a glass of water to the chocolate in the past.

  > Any ideas of cause or possible cure?

  It is possible that the signal is too low or there is interference of digital transmission

• Changing permissions in registry under Windows XP and Windows7

  How to change permissions for registry under Windows XP and Windows7.
  I tried using Regini.exe but that did not work.

  Thank you
  Amit

  Does that help at all?
  http://support.Microsoft.com/kb/310426

  Ethan

• AnyConnect VPN - Force Transport Protocol DTLS

  Hey, I use AnyConnect (2.4.1012) to connect to my 5505 (8.3.1). I want to activate DTLS as a transport protocol, I used the following commands:

  Group Policy attributes AnyConnect-GrpPolicy
  WebVPN
  Dtls enable SVC

  When I connect my Anyconnect client shows TLS as the transport protocol. The interface using CLI how can I investigate what happens? My Cipher is RSA_AES_256_SHA1 if that makes a difference.

  Thank you.

  Can you please share the output of "filter name svc, see the vpn-sessiondb retail" once you are connected?

  In addition, if UDP/443 is blocked from the path, it will return to use TLS (TCP/443).

• How to change the default "/" shortcut (select none in the shade of color) to something different? Where can I find this in keyboard shortcuts?

  How to change the default "/" shortcut (select 'none' in the shade of color) to something different? Where can I find this in keyboard shortcuts?

  Any ideas?

  In the Tools menu:

  "Apply no color."

• HOW to: Change the default "save under" path Reader 8.1.2

  HOW to: Change the default "save under" path Reader 8.1.2

  Thank you!

  Not possible, unfortunately.

• Oracle MAF: Changing data in non-reflecting DB in WebService.

  Hello

  I use Oracle of the CRG as well as AMPA (A-team Mobile Accelerator persistence) to develop a mobile application.

  MAF Version: 2.1.2.0.41

  AMPA Version: 12.1.3.2.32

  WebLogic Version: 12.x

  Oracle Toplink Version: oracle.toplink_12.1.3

  I encountered this problem often, I made changes to data manually to the backend (Oracle DB) and try to get the data modified by Web service URL in the browser. But data changes to does not appear until I restarted the WebLogic Server (where I deployed the Application WebService) and redeploy the application.

  Is it possible to reflect the changes without restarting the WebLogic Server? Because it will be needed when this application become a request for support.  Please suggest.

  PS: Please comment below, if you need clarification in this regard.

  Kind regards

  Indana Blackburn

  Hi Steven Davelaar,

  Thanks, I'll look at the link that you shared.

  ___________________________________________________________

  Update:

  Yes, it seems problem with TopLink which I've used (oracle.toplink_12.1.3).

  ___________________________________________________________

  Update:

  As Steven suggested, we need to disable the cache in TopLink, here is the code example to set this configuration in persistence.xml (note the number of the line 12 and 18).

  
  
    
      org.eclipse.persistence.jpa.PersistenceProvider
      java:/app/jdbc/jdbc/DBDS
      model.TableName
      
        
        
        
      
    
    
      org.eclipse.persistence.jpa.PersistenceProvider
      model.TableName
      NONE
      
        
        
        
        
        
      
    
  
  

  Now, Webservice will give you latest data always it will render all cached data.

  Thank you

  Indana Blackburn

• Matte, non-reflecting screen on Satellite Pro A120

  Hi, I'm about to buy
  Toshiba Satellite Pro A120 Core Duo 1.66 GHz 512MB 40GB COMBO XP
  quicklinx: 454PPN
  Manufacturer part: PSAC1E-03X00YEN

  But have a question. This laptop has display Crystal Bright/True Brite etc.?
  I prefer laptops with screens "masts", non-reflets.

  If this one has 'mirror' screen, could you tell me, who do not have?
  I am interested in laptops with Core Duo and 512 MB of RAM (propably series A or L).

  Thanks in advace...

  Chris

  Hello

  According to all specifications of this notebook doesn't TruBrite display. By the way for this laptop is "money supply". Not bad!!!

  I read somewhere that Satellite A120 has the same construction as Tecra A8 and it must have really good unit interpreted.

  In any case you can check under http://www.buytoshiba.co.uk/Toshiba_Satellite_Pro_A120_PSAC1E-03X00YEN/version.asp

  Good bye

• Export of Photos - how to change the drag and drop non-original standard 'export '.

  Hi all Mac experts.

  I'm on OS X 10.11.3 and 1.3 on an iMac Photos 2009.

  Like other users, I had been frustrated by the slow export of files by drag / move.

  I have already learned that at least one of the reasons are that the files are converted if simply to slip and fall.

  Here's my question: is it possible to define the standard action on drag-and-drop to be 'non-original export?

  and if so, how?

  Thanks and best,

  What.Ever.Flies

  You can't and can never change how to drag and drop work - if you hold down the option key by dragging and dropping a picture, you will get the unmodified original or are you export the unmodified original, you will get it

  LN

• TCP/IP not installed network transport protocol

  I can go online, but when I try to go to frostwire e.g. I won't let me

  Hello

  You expect that everyone knows is that frostwire e.g. and familiar with your system?

  With regard to transport TCP/IP network protocol.

  Try this, http://www.ezlan.net/clean.html#refreshnet

  Or uninstall and reinstall the TCP/IP protocol.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Monitor the changes between the PNP and non - PNP

  Hi, I'm completely stumped on this problem. I got my new PC for about a month, and during the last two weeks, I knew the Windows device disconnect sound, maybe once or twice every 30 minutes. I didn't mind at first, but now it becomes incredibly annoying. After trying to diagnose the problem, I discovered that it was a problem with my monitor. I use a VGA connection (this is the only method available right now, and I noticed in Device Manager, whenever I hear the sound of the disconnection, the driver for the monitor goes from the PNP to the non - PNP and vice versa. I have no idea why it does this, or how remedy. Any suggestions?

  Hello Adam,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  The monitor display anything after hearing disconnect sound?

  I suggest you to uninstall and reinstall display drivers and check the issue. Please use following steps:

  a. identify the type of adapter installed on your computer. Click the Windows 'Start' menu. Click on "Control Panel" and "system and security." Click on "Device Manager" click on 'show cards '. Your name and brand of your video card will be displayed.

  b. click on 'control panel '. Click on "Uninstall programs" under "programs". Scroll down the list until you find your video card driver; the pilot may not have your exact model in the name of the program, but it will show the manufacturer. For example, if you have an ATI graphics card, the driver would be "ATI Catalyst Control Center".

  c. Select the video card driver, and then click "Uninstall". Follow the step by step instructions, which includes generally confirm that you want to uninstall the driver and clicking on 'Next' to continue through the uninstall process. Click 'Finish', when the driver is uninstalled.

  d. navigate back to the "display manager". Click on 'show cards '. Right-click your video card. Click on "Update driver software." Click on "Search for automatically update driver." Windows will start searching online updated for your graphics card drivers. Available updates will be automatically downloaded and installed. When the driver is installed correctly and may ask you to restart your computer, Windows will notify you.

  e. visit the graphics card manufacturer's Web site. If Windows cannot find the selected driver, you will need to manually download it from the manufacturer. All the drivers are located on the "Drivers" of the Web site of the manufacturer part.

  You can also use the suggestions in this article and check if it helps.

  Reference:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-ISN

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• How to change the font color under block Action workflow history?

  Hi all

  How can we change the font color to Blue(see attachment) to the Red under history of Oracle Workflow Action block.

  In my scenario, the user has launched good order to the approver. He goes to the first approver. First approver enters his observations and approvers it. PO goes to the second approver for approval. now when the second approver opens the notification, it should be able to see the comments made by the first approver in red instead of blue.

  In short every time that comments are those should visible in red once stored.

  

  Try to set the CSS class.

  I do not remember exactly where this region is generated. Check the Message in the workflow and see how this region is rendered.

  If it's HTML, you must define tags, if there is an OA region, you must customize the OA region and add a CSS class on the ground.

  See you soon

  AJ

• Changes of waveform, not extended to multiple channels?

  I work with Adobe Premiere Pro CC and hearing 2014. I sent my sequence of any hearing through first. I edited the first clip on the first track of waveform. It was minor changes, I applied the unclip minor cut, then I adjusted the upcoming volume of Chief sub - 3db on the strongest parts. I saved the file, however, when I switch back to multi-track and play the clip changes that I made to the clip in wave form are not there in multiple ways. The volume of the clip is hitting 0db and not reflecting is not the volume control. Am I missing a step? I closed project hearing, saved and re-opened the file folder, but corrections are not in the Multi-track, yet are there when I switch to waveform. I'm a beginner at the hearing, so not sure I work in it correctly.

  Thanks for any help or input.

  Hi Sonia,.

  If you send a single item (or individual clips slightly) at the hearing, first performs an operation to "Restore and replace", generate new WAV files for each of the clips and sending these new files on hearing.  When you change the waveform for these files, the changes should appear in first immediately.

  However, if you send the entire sequence during hearing, new files are unrelated to the clips in the timeline of the first.  Instead, that refer you to Premiere Pro is a mix of the full session.  (There are other options, but for the sake of explanation, I will focus only on the final mix).  It is a single file that represents the final sound for a project and is inserted into a new audio track in Premiere Pro.  The original tracks could be muted, and exports will contain the audio that was finalized in hearing.

  If you want to fix a single element in your Premiere Pro sequence timeline, just choose item edit in Adobe Audition and you should see the clip update with your changes when you save the file WAV in hearing and go back to Premiere Pro.

• Is it possible to make a reflection of the image that will change with the image? [was: reflection]

  Is it possible to make a reflection of the image that will change with the image?

  

  I believe that a dynamic object will solve your problem.

  Place your original image to a new file as a smart object and do the same for reflection (made by processing, reducing the opacity and introduce a slight blur horizontal) on its own layer, then:

  by double clicking on the smart object in the layers panel and return to the original image, any change in the original and save, automatically update the vertical image and its reflection.

• Script to remove all non-visible channels

  I'm looking to do a script that deletes all the strings that are not visible.  This would include the RGB layers.  That would be my first attempt to script.  So I have no idea where to start.  Any help in the right direction would be great.

  Thank you

  Chris

  Thanks for the, Tom. I missed that. However, the unexpected behavior that I have seen was when I delete the red channel, the Green and blue channels are replaced by channels Magenta and yellow and there is a change of color on the image. Turning off visibility red looks different to remove the red channel. Removal of Cyan in CMYK is visually identical to make this invisible channel.

  function main() {
    if (app.documents.length == 0) {
      return;
    }
    var doc = app.activeDocument;
    var chnls = doc.channels;
    for (var i = 0; i < chnls.length; i++) {
      var chnl = chnls[i];
      if (!chnl.visible) {
        chnl.remove();
        i--;
      }
    }
  }
  main();