my windows defender will not open or run. It indicates the time-out period has expired. Help

Similar Questions

• "Time-out period has expired, please login again. Window message will be closed"when you try to access the GS724TP.

  Hello

  I use a GS724TP switch for my home network which has 17 connected devices. For easy management of network I created an HTML page with a clickable map with a link to all my devices inside. When I click on a link a new window will appear with the device management page. This works for all devices except for the switch. It opens a window saying "timeout expired, please log in again. Window will be closed. When I click OK, the window will close.

  The function of java script to open the window is as follows:

  The link is specified as follows:

  href = "JavaScript : viewpage ('http://switch-lan', 1280, 800, 'Y');'"

  The window below opens and I can only click OK.

  

  When I copy the link directly in my browser address field, all right. Could not find any arrangement regarding delays in connection in the switch management page. Also tried it with other browsers, same result. Anyone has any advice where to look? What is a check from sponsor?

  Thanks in advance,

  Erik

  The switch UI probably include javascript code that prevents it from loading in another window and probably translates into the execution of the production of the connection. Just for test, try to change the html link in your page source instead of window javascript now inject the preload and see if that makes a difference

  http://switch-LAN

  and see what happens. Or if you want to debug if the sponsor is the problem, you can do the test in chrome using the Inspector to look at the function, or probably you can check if the switch has the Javascript function block you by an inspector on the UI page switch and check JavaScript function when loading session

• Windows Defender does not open error 0x800106ba

  trying to turn on windows Defender (to set the start up programs) error message and defender will not open nor I can access the start up of the program list.

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• My Windows Defender will not remain, it turns off

  original title: My Windows Defender

  My Windows Defender will not stay on, even though I have a scan scheduled @ 02:00 every day. I do not understand why the Defender stops, and I get a warning telling me it's off. It analyzes every day @ 02:00, and I manually do a quick scan when I see the warning icon. Help!
  Thank you for your help.

  Bonnie Mayer

  Copy davidhk129 answer to the question of Windows Defender won't start do not:

  Here's a direct copy...

  If you have
  one of the following AV, antivirus, programs installed, it will stop your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok.
  It's normal.
  List of AVs which will stop Windows Defender:

  Norton
  McAfee
  AVG
  Microsoft Security
  Essentials

  If you don't have AV programs above, here's how to restart Windows Defender:

  Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows
  Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• Windows Defender encountered an error: 0x800705b4. This operation completed because the time-out period night.

  Hello

  I'm a Microsoft Online Customer Service, which contacts on behalf of my client. It lights its Windows Defender and received this error message below:

  «Windows defender encountered an error: 0x800705b4.» This operation completed because the time-out period night. »

  Hello

  ·         You have a third-party security software installed on the computer?

  Method 1:

  If so then try to disable the antivirus and then check to see if you can turn on Windows Defender.

  You can check this link for more information on turn Windows Defender on or off: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Defender-on-or-off

  Note: Make sure that you enable the antivirus once you are finished with the test. If the problem is resolved, you may need to contact the manufacturer of the program for the settings that can be changed or if there are other updates for this program.

  Method 2:

  Follow the steps in troubleshooting this article and check if that helps:

  How to troubleshoot Windows Defender definition update

  http://support.Microsoft.com/kb/918355

  Also, try the steps in this article: Impossible to activate the application Windows Defender in Windows Vista

  Method 3:

  Try to restart the Windows Defender service and check if it helps.

  a. Click Start on the start menu, search type services.msc and press ENTER.

  b. in the services window, locate Windows Defender service in the services list.

  c. check that the status is started. If the condition column is blank, right-click on the service and select start.

  d. If you get error trying to force start the Windows Defender service, try to change the Startup Type to automatic and restart the computer.

• Error 0 x 80070079 windows 7 x 64 win7 - when you try to copy large files to USB. The semaphore timeout period has expired. Help, please!

  Any file larger and begins to copy and Quen stops about 95 to 98% before its finshed. This is some time and comes back with an error 0 x 80070079: the semaphore timeout period has expired. If I boot in safe mode, I get the same thing. I applied http://support.microsoft.com/kb/976972 and it did not help me. Help, please!

  I have Dell XPS9000, Win7 Premium, x 64, I7/920, Nvidia 260, 12 GB of RAM

  Hello

  Thanks for the reply Thahaseena. I think a lot of people have the same problem and it's partially the fault of Microsoft. It is the solution of the problem that works for most people if the heart of the problem is corrupt USB driver (s). The USB driver might get damaged due to defective USB device. This was my case. I bought the 16 GB Sandisk USB which has serious problems. It seems that it is real default, rather than fake. However, I am still investigating.

  This is what happens:

  -Start the copy of the file and at one point gets stuck. After all, you get that infamous error 0 x 80070079. If you try to shoot this defective USB before the error pops out, it's really dangerous abduction of USB that could cause corruption of the driver for the USB controller. This happened to me. So, after this point, none of the USB devices will be capable of the greatest copy files 1 GB +, because my USB drivers are now corrupt and and the transfer is slower. Fast devices and more small files work great, but if you have low speed USB 2.0 device it will not be able to complete the transfer of files at one time and you will receive the error.

  Solution:

  -Stop using the defective device to avoid a repetition of the problem (if you know who is defective). If you do not know, must be eliminated one by one.

  -Disconnect all USB cables except the keyboard cable (at least that is not based USB)

  -Use tabs and the arrows on the keyboard to get to Device Manager

  -Remove all usb drivers, including the one that is connected to the keyboard

  -You may need to force the closure - the dawn of the computer.

  -Do not turn on computer. Get on your knees and unplug the power cord. If you forget this step, the process of booth PC will load faulty driver again. (faulty or bad it depends on the scenario)

  -By unplugging the power cord and let it stay for at least 5 minutes, you force your PC to renegotiate the devices and drivers

  -Connect all USB cables

  -Check the usb status icon in the status bar. Sometimes, you may need to restart the computer if windows asks you to do. Restart the computer if you are not sure what I'm talking about.

  - and... Here we are. Bingo!

  Now, if you plug the faulty device once again, you will need to repeat the process. However, in my case I return to the seller or the manufacturer for repair. You can use this procedure to force the outcrop of USB drivers. That's why I say I blame partially Microsoft for that matter because there is no utility or command available to force this action automatically do that when the problem occurs. This could potentially help people with the question when a few USB ports stop working if its pilots involved.

  If it worked for you, please press useful Votes.

  Thank you.

  Ntongo

• The operation of e/s specified on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period

  The operation of e/s specified on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period

  I did no changes on my computer for functionality, commissioning due to above mentioned problem goes & long

  Hi KarlMaskery,

  1. When you receive the error message?

  2. you have any external hard drive connected to the computer?

  3. do you have security software installed on the computer?

  4 when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Clean reinstalled Vista. Windows Defender will not be open and turn on. Can I uninstall and reinstall WD?

  I use Windows Security Essentials OK, but Windows Defender is DISABLED and cannot be turned on. What should do?

  I use Windows Security Essentials OK, but Windows Defender is DISABLED and cannot be turned on. What should do?

  Windows Defender is part of the Vista operating system. It cannot be uninstalled, nor can you install another fresh copy in the system. This Windows Defender lives and dies with the operating system.

  It is called Microsoft Security Essentials, not Windows Security Essentials.

  MSE (Microsoft Security Essentilas) is supposed to close Windows Defender.
  This is because MSE has his own Defender. Run 2 defenders in the same machine allows to create conflicts.

  Therefore, it is normal to find widows Defender NOT enabled if you installed MSE.

  You don't have to do a thing. So be.

  If you want Windows Defender turned on because you want to access with the startup programs, here's another way without using Windows Defender...

  Start button in the search box, type msconfig... Enter... click on start up tab... Here is the list of your startup programs.

• Windows Defender will not update

  IHAVE windows XP Defender. For the last 6 month'sit will not be updated. Icannot find the shortcut to run the program. When the download of microsoft, windows defender update updates will not install. Help appriciated.

  Windows Defender may have been uninstalled.  Look in Control Panel to see if it is still listed.

  Windows Defender cannot be used with AVG, McAfee, MSE or Norton.  It is part of the Vista and Win 7 operating system and cannot be uninstalled.

  Windows Defender must be uninstalled XP if you use AVG, McAfee, MSE and Norton.  If you use these programs on your XP operating system, please be sure that Windows Defender has been uninstalled (from Control Panel).

  Windows Defender and Microsoft Security Essentials

  If you can not only your problem please post back and elaborate on your computer, programs AV, etc...

  Kind regards...

• Windows Defender does not open

  I recently had to reinstall MS Security Essentials. Now cannot open/start Windows Defender. A window appears and says that WD is off. When click to open get message - "WD has encountered an error: 0 x 80070424 - the specified service does not exist as an installed service'." "

  have always been able to use it - obviously was and should be installed/available service!

  Any advice much appreciated

  Chris

  It's normal. Windows Defender is disabled or in XP uninstalled when you install Microsoft Security Essentials because MSE includes the Windows Defender antispyware feature. If you use XP and Windows Defender is still listed in Add/Remove programs you must uninstall/remove it.

  Microsoft Security Essentials vs Windows Defender
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/08/26/Microsoft-Security-Essentials-vs-Windows-Defender.aspx

  Windows Defender and Microsoft Security Essentials on Windows 7, Windows Vista and Windows XP
  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/Windows-Defender-and-Microsoft-Security-Essentials/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

  I hope this helps.

• Windows Defender will not be updated

  I am experiencing strange shift of internet and I think it's because Windows Defender won't be able to update. I am running Vista x 64 final. I recently started to receive a new error every time I start my computer, something to the effect of Windows Defender service is unable to start. If I try to start it manually, I got the error: 0 x 80070003: the system cannot find the path specified.

  Normally I wouldn't complain about windows Defender does not because I have my own solutions, but I believe that it is still problematic within my system. Every half hour or so, my firewall warns me to say that something in a temporary folder called mpistub.exe or something is trying to access the internet. I found this exe is a windows update, so I allow it through. Now, I believe that because the service cannot start, the update is impossible to apply and continues to go to the internet to try to get a shift to internet update, causing news for my pc everything.

  Someone knows something like that? I would like to reinstall windows Defender so that it can update itself and let my only internet. And I don't mean simply turning on or off; I can't do this if the service does not start. Oh and I tried to restore to an earlier date, it is not far enough.

  Hi GooMoo,

  Try the steps of troubleshooting provided by Ajay, in thisthread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• collection of solitaire for the microsoft Windows 8 will not open

  Played windows 8Mmicrosoft collection of solitaire for several months.  Today, the application will not open.   No idea why.  Everything else works fine.  How can I solve this problem?

  I am also having the same problem, but most of my games do not work solitaire, Minesweeper, guy of gravity. Shark dashboard still works but I ran if these steps as you said but still does not.

  I experienced the same problem recently and found my problem. I don't know if this applies to other people, but here's what I found and changed:

  I use the Catalyst driver for my ATI graphics card.

  I turned off "morphological filtering" in the game 3d application settings.

  All games are now works great!

  Bernard

• Windows Defender will not work

  I installed the microsoft Security Center and now Defender will not work.

  If that's okay. How can I now change my Start menu?

  Use the msconfig method...

  Start > in the search box, type msconfig > press the Enter key > uac prompt > Startup tab > here's startup programs >
  To activate... check the box opposite.
  To disable, uncheck the box in front. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• My vista windows Defender does not work after got rid of the virus Windows diagnosis. What can I do?

  It gives me an error code and says that my windows defender is stopped. Is it because I have installed Microsoft Security Essentials to help eliminate the virus. What should I do? I tried unistalling it and reinstall but it won't let me not just uninstall first. In addition, the virus has a sound, it does at the start and he is always on my computer when I start my computer. This means that the files are still on my computer?

  Hello

  That's right

  MSE stops at the vista version of windows defender

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  follow these steps to remove this malware that you think it's still there

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Zip files will not open. Maybe I changed the program open to them. I installed Nero.

  I think I've inadvertently assigned will not open another program to open the files and now zip files/pictures with Nero or Windows photo

     Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  Restore the .exe Windows Vista file association, after badly with another application

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  For Windows Vista file association problems

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner