Changes to applications not updated to other users.

Similar Questions

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Model change DreamWeaver does not update of child Web pages?

  Hello group,

  
  Sorry for my question from newbie here.

  I loaded a HTML Web page and try it in a DreamWeaver template file.

  I then created Web pages from the template file ((fichier-nouveau-Page à partir dele de modèle-Site-modèle) and made sure the checkbox "Update Page when changes were made to the model" was selected/checked.)

  Then, I created several children Web pages and saved as .html files.

  I decided to change the system of navigation - part of the region of uneditiabel in the model - bar by opening the template file and edit-ing this file and then saving them in the same DreamWeaver template file.

  However, Web pages were not updated to reflect changes to the navigation bar in the French model?!

  Can someone tell me what I am doing wrong?

  

  I think it's something I'm doing wrong with DreamWeaver...

  If anyone is interested, here is the HTML code.

  -----------------------------------------------------------------------------------

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN".
  "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  "< html xmlns ="http://www.w3.org/1999/xhtml">".

  < head >
  <!-TemplateBeginEditable name = "DocTitle"-->
  < Title > CNC Joe workshop - Home Page < /title >
  <! - TemplateEndEditable - >
  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"
  "" < link href = "... / style.css" rel = "stylesheet" type = "text/css" media = "screen" / >
  <! - keep the http-equiv for IE8 meta tag - >
  < meta http-equiv = "X-UA-Compatible" content = "IE = 8" / >
  <! - link CSS file here - >
  "" < link rel = "stylesheet" type = "text/css" media = "screen, projection" href = "... / style.css" / >

  < / head >

  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
  < body >
  < div id = 'wrapper' >
  < a name = "top" > < / a >
  < a href = "index.html" target = "_self" title = "Home Page of CNC - Joe" > "
  "" < img src = "... / joesworkshoplogo.gif" width = "770px" height = "300px" alt = "Shop CNC Joe - Home Page" / >
  < /a >
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~ -->
  <!-BEGIN OF MENU DROPDOWN->
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~ -->

  < div class = "mainmenu" >

  < ul >
  < class li = "li_nc" > < a href = "index.html" target = "_self" > home < /a > < /li > "
  < class li = "li_hc" > < a href = "cad.html" target = "_self" > CAD < /a > < ul class = "ul_ch" > "
  < class li = "li_nc" > < a href = "cad_intellicad.html" target = "_self" > IntelliCAD < /a > < /li > "
  < class li = "li_nc" > < a href = "cad_draftsight.html" target = "_self" > DraftSight < /a > < /li > "
  < class li = "li_nc" > < a href = "cad_progesoft.html" target = "_self" > Progesoft < /a > < /li > "
  < /li > < /ul >
  < class li = "li_hc" > < a href = "cam_html" target = "_self" > CAM < /a > < ul class = "ul_ch" >
  < class li = "li_nc" > < a href = "cam_mach3.html" target = "_self" > Mach3 < /a > < /li > "
  < class li = "li_nc" > < a href = "cam_vcarve.html" target = "_self" > V-Carve < /a > < /li > "
  < class li = "li_nc" > < a href = "cam_cut3d.html" target = "_self" > Cut 3D < /a > < /li > "
  < class li = "li_nc" > < a href = "cam_bobcadcam.html" target = "_self" > Bob-CFAO < /a > < /li > "
  < class li = "li_nc" > < a href = "cam_meshcam.html" target = "_self" > lattice CAM < /a > < /li > "
  < class li = "li_nc" > < a href = "cam_deskcnc.html" target = "_self" > desktop CNC < /a > < /li > "
  < /li > < /ul >
  < class li = "li_hc" > < a href = "projects.html' target ="_self"> project < /a > < ul class ="ul_ch">"
  < class li = "li_nc" > < a href = "projects_zzeroplate.html" target = "_self" > Z zero plate < /a > < /li > "
  < class li = "li_nc" > < a href = "projects_x0y0edgefinder.html" target = "_self" > X 0 - Y0 Edge Finder < /a > < /li > "
  < class li = "li_nc" > < a href = "projects_digitizingtouchprobe.html" target = "_self" > touch scanning probe < /a > < /li > "
  < class li = "li_nc" > < a href = "projects_millwebcam.html" target = "_self" > mill webcam < /a > < /li > "
  < class li = "li_nc" > < a href = "projects_laseredgefinder.html" target = "_self" > Laser Pointer Edge Finder < /a > < /li > "
  < class li = "li_nc" > < a href = "projects_davidlaserscanner.html" target = "_self" > David Laser Scanner < /a > < /li > "
  < /li > < /ul >
  < class li = "li_hc" > < a href = "reference.html" target = "_self" > reference < /a > < ul class = "ul_ch" > "
  < class li = "li_nc" > < a href = "ref_gcodes.html" target = "_self" > G-codes < /a > < /li > "
  < class li = "li_nc" > < a href = "ref_nema.html" target = "_self" > info motor NEMA < /a > < /li > "
  < class li = "li_nc" > < a href = "ref_vbearings.html" target = "_self" > V-bearings < /a > < /li > "
  < class li = "li_nc" > < a href = "ref_linearguides.html" target = "_self" > < /a > < /li > linear Guides "
  < /li > < /ul >
  < class li = "li_hc" > < a href = "offtopictopics.html" target = "_self" > off-topic topics < /a > < ul class = "ul_ch" > "
  < class li = "li_nc" > < a href = "ott_backyardfoundry.html" target = "_self" > BackYard Foundry < /a > < /li > "
  < class li = "li_nc" > < a href = "ott_blacksmithing.html" target = "_self" > forge < /a > < /li > "
  < /li > < /ul >
  < class li = "li_nc" > < a href = "links.html" target = "_self" > links < /a > < /li > "
  < class li = "li_nc" > < a href = "contact.html" target = "_self" > Contact < /a > < /li > "
  < /ul >
  < / div >

  <!-END OF THE MENU drop-DOWN->

  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~ -->
  <!-END OF THE MENU drop-DOWN->
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~ -->
  <!-TemplateBeginEditable name = 'content'->
  < h2 > projects: scanning Touch Probe: < / h2 >
  < ul >
  < li > < /li >
  < li > < /li >
  < li > < /li >
  < li > < /li >
  < li > < /li >
  < li > < /li >
  < li > < /li >
  < /ul >

  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
  <!--end of the editable - the rest is boilerplate-->
  <! - TemplateEndEditable - >
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
  < br / >
  < p > < a href = "#top" > top < /a > < /p >
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
  <!-- Footer Region                                                                                    -->
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
  < div id = "footer" >
  < hr / >
  < p >
  "< a href ="http://validator.w3.org/check?uri=referer">."
  "< img class ="logo"src ="http://www.w3.org/Icons/valid-xhtml10"alt ="Valid XHTML 1.0"Transitional height ="31"width ="88"/ > < / a >"

  "< a href ="http://jigsaw.w3.org/css-validator/check/referer">."
  < img style = "border: 0;" width: 88px; "height: 31px;
  "Class ="logo"src ="http://jigsaw.w3.org/css-validator/images/vcss"
  ALT = "Valid CSS!" / >
  < /a >
  < /p >
  < h5 > < strong > < i >
  This site is only for educational purposes. Any resemblance to any person, alive or dead - is purely coincidental
  < /i > < / strong > < / h5 >
  < / div >
  < / div > <!--end Div Wrapper - >
  < / body >
  < / html >

  OK - I thought about it!

  When I edited the .dwt model - I used 'SAVE AS' to save the file - it's FAKE!

  I should have used just on 'SAVE', and DreamWeaver then asks if I want to update the files created with the template.

  Further Questions:

  -Whence the DreamWeaver store information about which pages were created with what model?

• Change a message not updated with new message corrected even on the last update of Skype

  When you edit a message, Skype is not updateing with the corrected version of the message. It was happing in the previous and updated versions to current day. Few people in my organization have reported this as well. Any ideas? Thanks in advance

  This is a known bug in the latest version of Skype 7.17. You can uninstall this version and install the older version of Skype 7.16.0.102 using this Setup program:

  http://download.Skype.com/MSI/SkypeSetup_7.16.0.102.msi

• Page customizations do not propagate to other users

  Hello everyone,
  
  I am facing a 'problem' when a user customizes a Webcenter portal page.
  The customizations are preserved, but only for that user, as if it was a customization and not a customization...
  
  Is there something to configure in the MDS to share customizations? What and where?
  To be sure, the user customization and no customization?
  
  Thanks for the support.
  
  Vincent.

  One possible reason could be that you have configured the MDS with a UserCC.
  You can configure a class that will be used by the MDS which will return the name of the layer to store customizations in. By default, only the SiteCC is configured that will store the customizations in a layer that has the name of the application.
  In your case, this class can be the UserCC that stores customizations in a layer with the name of the user. That might explain your behavior.

  In order to change this, open the adf - config.xml in the ADF META INF file. The MDS Configuration, make sure that the SiteCC class is added to the list and remove the UserCC if its there.

  If you don't see the UserCC in the list of classes of customization, then it should be something else, but depending on your behavior, it seems that the SDM is using the UserCC.

  Published by: Yannick Ongena on 23 January 2012 10:44

• Firefox doesn't work only under administrator, does not open in other users.

  Windows XP Pro SP3. Removed and reinstalled Firefox. Firefox still not open under the 2nd user, single owner/administrator. No error code given.

  Disable extensions have any effect?

  If it works in Mode safe mode and normal mode with all extensions (Firefox/tools > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via "Firefox > Exit ' (Windows: Firefox/file > quit;) Mac: Firefox > quit Firefox. Linux: Firefox/file > exit)

  Create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• palette not updated with files user.lib

  I took a certified driver file, put in user.lib, rename the project file and the folder that contains. I opened the renamed project, change the colors of the icon of VI of all the project files, relink all the missing files to the user.lib directory, backed up all the files, saved the project. Then I reboot LV2014 and no menu appear in the user library tools.

  Someone has it tested using LV2014 or more?

  Rich J

  Just an info it is a funciton Palette cool off under the control of the Application > range of editing that can be used to test.  It won't refresh the menu Tools, but it allows to edit files and in the user.lib MNUs then call Refresh to see if it worked without having to restart LabVIEW.

• Application not updated

  Hi experts,

  I developed an application that runs at startup. I've made changes on a message in the dialog box that informs a user that an action has been performed. When I try to run the application on the Simulator, it keeps displaying the old message instead of the new.

  I tried to delete all the programs files (COD, JAR,...), but without success. Anyone know where the problem comes from?

  Thanks a lot for your help.

  T

  The solution was to go to option, advanced, applications, then module and remove the module before restarting the Simulator.

• new entity persistence does not update the other side of the relationship?

  Hi all
  
  I don't know if I missed this when learning/reading on ejb3... I have two objects, a user and a friends list. A user can have many friends. A friends a lot back to the users. When I still a new user... There no friends yet... which works very well. When I persist a friend, I still the entity from a friend... who saves. I even add the friend.setUser (user). For some reason, the persistence of a friend works... but the user.getFriends () returns 0 friends. I would have thought persisted a new entity to a friend with the set of users, would also update the user with a mapping of many institutions? It seems that I have to do something like:
  
  The < friends > friends list = user.getFriends ();
  If (null == friends) {}
  friends = new ArrayList < friend > ();
  user.setFriends (friends);
  }
  Friends.Add (User);
  
  When I do this... It then adds the friend, and it seems to update the relationship of the user so that user.getFriends () returns the newly added friend too.
  
  Is there a better way to do it? Should I rather put the new friend on the list of users... and who will continue the friend too?
  
  Thank you.

  Yes, unfortunately, you must do it manually. Hibernate supports this feature, but that does not make them in the jpa specification, so when you use App, you must explicitly update the two ends of the relationship.

• Address bar URL and FavIcon image do not update until the user clicks the Site identity button

  I noticed that each time the Site identity button is gray (i.e. most of the time), when you navigate different pages on a web site, the address bar does not change and just continues to show the root of the domain, for example "eircom.net" when the actual URL can be 'http://entertainment.eircom.net/movies/'. the real URL is not revealed until I click on the Site identity button. I get a pop up of Firefox "this website does not provide identity information.
  the URL of the previous page/site (and the image of the FavIcon) are left in place until I click on the button.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Skype calling do not even if other users is online

  When I try to call someone online I click the video call button, but it do ring. Or after the restart Skype and with different users.

  Please let me know how this can be corrected

  You use the 'modern' Skype application (metro). Better, you can install the desktop version of Skype for Windows 'normal '. In all cases, the 'modern' Skype application will be disabled within 3 days now (July 7).

  http://blogs.Skype.com/2015/06/11/a-more-efficient-Skype-experience-for-your-PC/

• iMessages does not update from other devices?

  When I send an iMessage on my iPhone or iPad, it does not appear to be updated to show this on one of my Macs. If I send it to my Mac it does not refresh on iOS devices. It allows, and I'm able to sync my open tabs in Safari. Anyone know what could be wrong?

  Thank you.

  I have the same problem since 1 month now.  solve everything?

• photos of iCloud web application not updated

  Hello everyone.

  New in the universe Apple here so I'm still finding my way around. Almost no problems apart from a problem syncing my iCloud account and especially the Photos. Synchronization between my devices (IPhone 5 s, Macbook Pro 13 retina and also the iCloud for PC at work) works perfectly, which means that everything happens in my cloud, as they should. However the iCloud.com Photos app seems to be stuck in two weeks ago and guard showing the same message "update of 65 photos" without showing new photos or those updated the. Don't know if there is a way to reset the web application, as the rest of my sync seems to work very well.

  Clues?

  Thanks in advance,

  Mihalis

  The photos appear correctly on computers/devices?

  Try the settings/iCloud and remove the synchronization. Wait a few minutes and then resynchronize.

  Try to go into System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing.

  Have you tried the signature to iCloud and then reconnect?

• Edit box does not work for other users

  I have created a dialog box using one of my scripts.

  However, it only seems to work for me.  When I share all my files with another user of tiara on my place of work, he can't enter a value in the EditBoxes.

  Is there a setting somewhere that he needs to make sure is active, or do I have to change something in my dialog box?

  Thank you.

  I don't know why it happens, but if you increase the vertical size of the edit boxes a bit more, it works.

  Maybe it is related to the parameters of resolution/screen fonts.

• models not updated

  Hello
  
  I recently bought a laptop and it's use in tandem with my office (depending on where in the House I must be!). I have a network set up file sharing to allow me to access the files on the system. My problem is that when I made the changes in a model .dwt file it did not update all other pages that use this model. Have left me now with a few images very skewiff which are locked by the model. Any suggestions?
  
  Thanks as always
  
  Emma

  Thank you Murray - was about to post that I had solved the problem. I forgot to create the site in the new laptop computer has therefore had no root folder pointing to anywhere! Set the site and everything is right with the world of Emmas!

  Thanks again

  Emma