iMessages does not update from other devices?

Similar Questions

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• IMessage does not sync between all devices

  My ipad/Mac will not sync with my iphone imessage. Until I reinstalled my Mac wasn't a problem. If I type a message to someone in imessage from my Mac or my iPad, it does not display in my iphone vice versa.

  imessages from my iphone will not only do not appear in the other two devices, but the response I get will not pass to the device, sure I typed the message. Even the opposite effect. Messages and responses to Mac/iPad won't go on my iPhone imessage.

  Should what setting I change to get everthing again between all devices sync?

  Have you checked that you have activated the same send to and receive to address on all devices.

• new entity persistence does not update the other side of the relationship?

  Hi all
  
  I don't know if I missed this when learning/reading on ejb3... I have two objects, a user and a friends list. A user can have many friends. A friends a lot back to the users. When I still a new user... There no friends yet... which works very well. When I persist a friend, I still the entity from a friend... who saves. I even add the friend.setUser (user). For some reason, the persistence of a friend works... but the user.getFriends () returns 0 friends. I would have thought persisted a new entity to a friend with the set of users, would also update the user with a mapping of many institutions? It seems that I have to do something like:
  
  The < friends > friends list = user.getFriends ();
  If (null == friends) {}
  friends = new ArrayList < friend > ();
  user.setFriends (friends);
  }
  Friends.Add (User);
  
  When I do this... It then adds the friend, and it seems to update the relationship of the user so that user.getFriends () returns the newly added friend too.
  
  Is there a better way to do it? Should I rather put the new friend on the list of users... and who will continue the friend too?
  
  Thank you.

  Yes, unfortunately, you must do it manually. Hibernate supports this feature, but that does not make them in the jpa specification, so when you use App, you must explicitly update the two ends of the relationship.

• Hour system does not change from other time zones when autoamtically adjusted for DST

  I have the same problem. My House in time (UK) automatically adjusts for DST, but the other times around the world are not. I tried the fix above & it said it had found & solved the problem but nothing has changed.

  Suggestions more please?

  Hello Adrian Thurley.

  a. Click Start, type cmd in the search box, select command prompt, right click and run as administrator.

  b. at the command prompt, type:

  ' w32tm/Debug /disable' and press 'Enter' (net stop w32time gave an error 5 access denied response!)

  Type 'w32tm /unregister' and press 'Enter' (without using the first command, the second did not!)

  You should get the answer "W32Time successfully saved."

  c. Type "w32tm /register" and press "Enter."

  You should get the answer "W32Time successfully registered.

  d. type 'net start w32time' and press 'Enter '.

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• X200T not boot from any device after updating the Bios v3.00

  Hello

  I recently updated my bios to the latest version, the v3.00 X200T and now it does not start from any device - everything I get a blank screen after the initial bios starts upward.

  The bios seems functional and it recognizes all the devices I attached, as well as the internal hard drive. However no matter how to start the machine it does not start. I tried to set the boot order in the bios, using F12, F11 for recovery, remove the internal HARD disk, used all the USB ports, etc... -all I get is a blank screen after the initial splash screen.

  No beeps to indicate any problems, and I tried to reset the default settings of the bios, remove battery & power - all to nothing does not.

  Any ideas?

  I updated the bios of many laptops and desktop computers in the past, but this is a new one on me...

  I hope someone can help.

  Darren

  It seems that it also happens to X 200 owners who upgrade to version 3.01 of the Bios.

  mc2sgp has posted a response in this forum that worked for me:

  "I have the same problem and found the way to a temporary solution."  Go into the BIOS (you should always be able to press F1 to go into the BIOS) and go to Config-> CPU Intel VT - d characteristic of-> and disable it.  You should now be able to start normally in your operating system. "

  At least, I can now start my camera.

  Hope this helps others.

  Darren

  ADMIN edit: tagging this post as the solution to guide others to the bypass.  Lenovo will remove the BIOS on the web and replace it with an updated version that resolves these symptoms as quickly as possible.

• OCR does not work on mobile devices after the update. How can I make it work?

  Ocr does not work on mobile devices after the update. How can I make it work?

  Hello

  Acrobat Reader mobile apps (for iOS, Android, Windows Phone) is the free PDF viewers. They don't support OCR (Optical Character Recognition).

  However, you can purchase the subscription online service called Adobe export to PDF and use it in mobile applications of Acrobat Reader to convert PDF documents to other formats (e.g. Microsoft Word, Excel, PowerPoint).

  Have you already bought the Adobe online subscription service export to PDF?  Would make sure that you're signed in with your Adobe ID to use the service?

• My C50 - B Satellite does not start from the HARD drive

  Details of the machine: -.

  Model number: PSCMLA-03F07Q
  Serial number: XE343127P

  Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

  Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

  I reduced the possibilities to a fault of BIOS, reasons.

  System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

  The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

  1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

  Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

  Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

  I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

  See you soon,.

  Andrew.

  Hello

  From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
  HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

  What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

  Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

• Bluetooth keeps on searching, but can't find them and the laptop is not detectable in other devices

  Original title:

  Bluetooth keeps searching

  I have windows 8 on my laptop. trouble with bluetooth. He continues to search for available devices but is not found. In addition, the laptop is not detectable in other devices. the customer care guy told me to re install the bluetooth driver by downloading from the microsoft Web site. not able to see that now. pls help.

  Hello

  Here is the download link for SW update for laptop you.

  You can install the appropriate software for your computer easier and faster using the SW update.
  SW update program helps you install and update your software and the driver easily.

  http://www.Samsung.com/in/support/model/NP355E5X-A02IN-downloads

• Cannot install Minewsweeper - this app does not work on your device

  Recently I updated the day of Windows 7 Professional x 64 for Windows 8 Pro x 64, so I tried to install the Minesweeper in Windows Marketplace 8, I received the error "Sorry, this app does not work on your device."

  While I install other pretty good games, including Mahjong MS and MS Solitaire, I wonder what the problem is with the windows due to the problem... Thank you.
  http://PostImage.org/image/wfh09knmd/<-screeenshot.>
  PC configuration: 4 GB of RAM, Intel Core 2 Duo E6420, 640GO HDD with 166 GB free on drive C.
  Thank you.

  Hi Alexander,.

  It seems that you have a hard time with the installation of Windows game. We need more information to help you in a better way.

  1. you are using a third-party antivirus?

  2. you did it of any hardware or software changes?

  3. is the question confined to the Minesweeper?

  Here are a few methods, we can try to solve the problem with the installation of apps...

  Method 1: Download and run the troubleshooter modern UI App and check.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

   

  Method 2: Please follow the troubleshooting steps in the link below.

  http://Windows.Microsoft.com/en-in/Windows-8/why-find-install-app-Windows-store

   

  Method 3: check if the region is correct. Follow the steps mentioned.

  a. type 'region' on the start screen. Click on 'settings', and then press ENTER.

  b. on the "Format" tab, select "English (United Kingdom).

  c. click 'Preferences of languages' > 'add language' and add 'your language'.

  d. Once added, select it and click "move up" to make it the first language. Close the window of the language.

  e. in the 'region' window, click on "other settings" and check if the values are the same.

  f. click the "location" tab and change the location of the home to "your country" and then click OK.

  Method 4: temporarily disable the antivirus and check if that helps.

  a. press Windows + X, click on Control Panel.

  b. click on programs and features.

  c. right-click on the Antivirus system.

  d. click disable.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. Please get back to us if you have any other questions. We are here to help you.

• Recently changed my Apple ID and now does not update apps

  I know that this happens to a lot of people and I searched the forums to find someone with the same problem who received the help of the community, but I have not found the post again so I decided to make my own.

  I had to change my apple ID because I got hacked. I don't have a new brand, I changed the email of the Apple ID, I already had. Everything seems fine, except that now does not update my apps on my iPod touch. I know this is because applications are no longer associated with the correct email and this is most likely the problem, but I'm not sure how to fix it.

  I made sure that I disconnected all my accounts (Apple store/iCloud/choice of account) on all my products apple (2 pounds of Mac and iPod) and has signed all the accounts mentioned previously with new Apple ID. No progress, which makes sense because the applications are linked right old Apple ID?

  So I deleted all my apps thinking I could redownload them. But they are associated with my iCloud it seems... so I tried to disable my iCloud on the iPod so that apps would show 'get' instead of 'download' in the Apple store (basically doing my iPod are realizing that it is a new Apple ID and I want to get the apps for "the first time"), but that no longer works.

  My last attempt was to remove an application on my Macbook, in the hope that "get" appears instead of "Download", but in a way that no longer works. I even connected to my iCloud with my new apple ID and none of the apps show on my iCloud. I'm quite confused. Someone at - it insight, ideas, or suggestions on how I might remedy other that go into an Apple store or do a factory reset on the iPod? Does anyone know if the factory reset would even work?

  Thank you!

  Of the information your provided, it seems that your created a new ID ranting as update the e-mail address for the original code.

  What did you do?

  Say this, you:

  Change your Apple - Apple Support ID

• Podcast app is not updating from iTunes

  Podcast app is not updating from iTunes

  

  Saying "Podcast is available on IOS - only to get Podcasts search app store for your IOS device.

  I use 3 (new ipad, IOS 9.3.2) iPad and iTunes for windows 12.4.1.6

  How to solve it? Thank you

  Ignore the update, Podcasts is built into iOS 9, you can't update built-in apps on your iPad (except through iOS updates). (It's show due to: remove the built-in apps from the home screen on your device iOS with iOS beta 10 - Apple Support)

  If you have not all devices running older versions of iOS (or if you do, if you do not use Podcasts on them), you could remove the application from the My Apps from your iTunes library section so that the "update" to disappear.

• iMessage does not work for me. I have no text to send or receive texts as an alternative. I am able to use the Internet to navigate / social media but iMessage completely ceased to operate. I tried the usual phone turn off / on, reboot, etc.

  iMessage does not work for me. I have no text to send or receive texts as an alternative. I am able to use the Internet to navigate / social media but iMessage completely ceased to operate. I tried the usual phone turn off / on, reboot, etc. and still nothing. What can I do?

  What methods have tired to get it activated?

  You can disconnect from the iMessage

  Disconnect from the iCloud

  Reboot your phone

  Reconnect

  Wait iMessage activate

  Do you have a viable data plan?

• HP Support Assistant on my laptop or desktop does not detect the other machine.

  HP Support Assistant on my desktop or my laptop does not detect the other machine.  They are both on the same network.  Both are HP machines. Both are running Windows 10.  Is normal.  I would like to kind of monitor my desktop with my laptop when I'm away from home.

  @bmedbury

  The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• iCal icon does not update

  Hello

  I'm running on one in 27 iMac (mid 2011)

  After the execution of the last update to El Capitan (10.11.4)

  The Calendar iCal icon / does not update the current date.

  • I deleted the icon from the dock and added it
  • I restarted
  • Entered in the user's library and moved the plist on the desktop and restarted...

  Any suggestions?

  Thank you

  Denninc,

  Go to System Preferences > language and region > region:... .and all/re-set "in your area".