Changing colors of link in the Template Dreamweaver CS5

Similar Questions

• Use the links in the templates

  Hello! I'm having a problem with the links I put in the page template showing on pages based on this template uses templates for the first time. For example, I use swap image behaviors for a navigation bar and made an area editable so that on a certain page, I can delete the swap image and just keep it as a stable image showing what page the observer is on (that makes sense?). I've attached an example (on the page of brass, the arrow would stay on this bar, and the rest of the images would have a swap image/restore as indicated on the page of the Exchange model).

  Now, because I've done cela an editable region, I noticed that when I put a link on the template page (ie. a link to the page of percussion instruments), the link is not displayed on the pages and I put manually into. I REALLY don't want to do this for each page. I am doing something wrong or there at - there a way around this? Any help would be greatly appreciated!

  p.s. I design with css and almost exclusively in design mode. The code makes my head turn, sorry

  -Change

  var g,dd="images/left_tabs/brass_down.gif;

  on this subject.

  g var, dd = "_down";

  and this-

  to this -

  And consider the construction of your page without all this absolute positioning.  It is deadly.

• Link in the Template

  Hello
  ATM, one of my templates page contains something like
  .. .div id = 'menu '.
  UL id = "navigation".
  Li ID = "page1".
  a href = "." / » /a
  /Li
  Li ID = "2".
  a href = "." / » /a
  /Li
  Li ID = "page 3".
  a href = "." / » /a
  /Li
  /UL
  / div...
  
  My problem is how or if I can link to a page in the template because I don't want to use the tabs here. If possible, I want to use the hard link in the template.
  I tried to use id = "page 3" li...
  a href = "http://10.41.34.57:8080/apex/f? ' p = 200:3: ' / has...
  
  But this way, Miss me the session and I whenever I use the link of relogon.
  When I used... id li = 'page 3 '.
  a href = "http://10.41.34.57:8080/apex/f? ' p = 200:3: & Session: ' /a_... (even with & APP_SESSION)
  the variable has not been replaced by the session.
  My Question is if and how it is possible to combine with the session.
  Greetings
  Sebastian

  Specify the substitution variables, as uppercase and ending in a point:

  &APP_SESSION.
  

  Also, instead of coding the navigation elements directly in the page template, it may be better to create a list separately and include it via a region on the page zero. This could reduce the overhead of having to maintain the list of models of separate pages and increase flexibility using several lists and conditions to display contextually, by page or on any other basis.

  Published by: fac586 on July 23, 2009 10:27

• Dreamweaver allows us to change destination, a link throughout the ENTIRE cluster ofPages?

  I have a link to an external site across the entire cluster of pages on my site.   Is there a command in Dreamweaver CS5 that would allow me to change this link as it appears throughout the entire cluster of pages, at the same time?    That of course would save me a lot of time if it can be done without me having to make the change manually and individually, on a basis of page by page.   Maybe something like this command exists, perhaps?

  "Change all occurrences of the following address of the _ the _ throughout the entire site.

  Suggestions, please?

  Dreamweaver allows three different methods to do so.

  As suggested, you can use the code server to call a page of text you are simply editing in one place.

  Also, as suggested, we can use of Dreamweaver Find and replace tool to replace all occurrences of a particular link. If you are looking for it in the source code, you must be very careful on how you specify what to search for and exactly what you want the replacement code.

  Finally, I started using templates for stuff with recurring information throughout a Web site. Things like the navigation, footers, headers and so on are very useful to automate a change in recurring content. If you have a link to the page that changes in navigation, if you have a model that manages that in all the pages, change you it once and Dreamweaver will ask you if you want to update all files based on this template. Answer 'Yes' and the page any changes will be made.

  Pages can be linked to only one model and it should nest templates.

  So, to fully answer your question, Yes. There are three methods at your disposal.

• Need to change the font color of link in the Notes

  After using a pretty decent Notes app for several years, I decided that gap after that a recent update has managed to remove a bunch of notes but also wrongly arbitrarily assign to various independent records.  The dev did not see fit to help.  So I decided to spend while Notes from Apple since it had some praise review and it works between Mac OS and iOS.

  All started well with several hundred copied until today when I copied a number that includes links.  Oh shit!  I just can't read the links due to use very little sensitive to very low color contrast - perhaps yellow?  Understand now that I have a decent vision – 20/20 fixed as a result of a slight farsightedness and I do not have color blindness, but trying to read characters from a link in the Notes is pure torture.  Sorry for the hyperbole, but it's true.

  I increased the contrast of the display using the system Pref accessibility, which really doesn't help, and I can't find anything else that alleviate the problem.

  Is it possible to change this?  I am familiar with the Terminal so if there is a way to do it via the Terminal, which would be a boon.

  We seem all to dislike the legacy colors Blue or purple link, but in most cases, we were able to change them.  However, in my worst nightmares, I can't imagine what jerk at Apple decided that no contrast is the way to show a link.  Without forgetting the Visual deficient QA group which took place and closed on it.

  Thank you!

  -Tod

  Edit: I also opened the Format > police > display fonts, then highlighted a link.  Text color icon at the top of the table of fonts changed to imitate the yellow color of the link.  Tried to change it there with no luck.  Whose light had the idea to limit the choice of the user, in particular those who are wired into the operating system?

  FWIW, I do not normally comment on GUI issues. However, in this case, you are perfectly right. It is yellow and it is almost unreadable. I don't know how to change the color of the link, but you can drop Apple a note.

  http://www.Apple.com/feedback/

• Why the links in the template to change the location to "file:///'...on the pages created from the template?

  I'm not sure what I am doing wrong but I am building a portfolio site of a model that I downloaded online.

  The site works and I'm slowly converting from the content of the template for the content I want.

  As I'm editing the site and adding several pages, I decided to try to add the header, the footer and the bar of navigation as a model with another container Gallery and navigation as an option on the model.

  I thought it worked very well until I noticed that the links on pages created by using the template are displayed as follows.

  instead of links that were in the model which show that,

  

  Is this something that will change when I download the site with the model or did I do something wrong links?

  You save your child page yet?  You must do the same. Once registered, DW will adjust the paths for you.

  Nancy O.

• How to change a div in a document when you used a template (Dreamweaver CS5)

  I have created a template, which is used by several pages, but you want to change the < div id = 'content-full-width' > <!-InstanceBeginEditable name = 'content'-> to a page to enlarge the content area.

  If I want to make a div id = 'new_content' and then make my page < div id = "new_content" > <!-name = 'content'-> InstanceBeginEditable

  How can I do that shows a page that is based on a main template?

  TKS

  Deb

  Thanks Murray.  I tried to fix the template to allow me to change the div tag, everything I tried screwed up the model (I am still relatively new to this).

  Stupid me, I had the editable inside the div tag, so he restrained me.  I saw another post (although I have searched and searched), after I posted my question with the same type of question and noted the necessary editable tag outside of the div.

  I tried again, and it worked this time.

  Before:

  After:

  .

  Thanks again for your help.

  Deb

• I have the thath Dreamweaver cs5.5 problem starts is not on windows 10

  Hello, I have the problem that dreamweaver cs5.5 does not start on windows 10

  Please see this

  Problems during the installation or opening Dreamweaver on Windows 10

  And Yes, you will need to reinstall your DW

  Hope this helps

• How do I change color of links on a page using the working capital model?

  I have pages using templates.  I want to change the color of the text of a link and have different color of the overview link.

  Open your CSS file if you have one, or change the style sheet embedded in your model of

• Help... I'm looking for a Web site template that converts automatically in Tablet and phone, so I have only not work not three as I am always changing? Please could you send me the links to the templates please?

  Need help as soon as POSSIBLE. Please comment suggestions. just need a model that automatically converts the phone and mobile, so I have to work on a single page.

  Thanks in advance.

  Just read this, and you see, that soon no need a widget to achieve: Muse CC Adobe engineering team

• How to change color of control press the button

  How can I change a color of command button when it is pressed and held?

  I want to know to momentarily turn green while being pressed.

  Thank you.

  The EVENT_LEFT_CLICK_UP got the desired effect. The toggle button now displays the color 'On' until the button is released.

  Thank you all.

• Change Active (?) Link in the Spry menu bar

  I have inserted a bar menus horizontal spry in my page and have adjusted behaviors for link properties (l, v, h, & a). However, I would like the text of the button menu spry to a specific and constant color for the active page linked (destination). For example, the background color of the menu bar is grey dark (#282828) and the text is light gray (#D9D9D9). If I point and click on the 'About' button the text is orange (#D96E11). How could I go to keep the text of this orange color once the page 'About' is reached?

  I am a newbie to DW, so I am not able to follow and understand your answer here. You said, ' give the tag which represents the current page ID. Where and how can I achieve this? From there, ' and then create a new style for the ID rule ". Do you mean create a new CSS rule-> type of selector: class?

  New DW isn't a problem, but to use it successfully, you must understand the HTML and CSS. Judging from your questions, you're new to them, too. Again, this is not a problem, but your progress will be slow and painful until you master the basics of these two technologies.

  There are several ways to add an ID to a tag of , but the best way is to first create the style rule. The example I gave is an ID selector, not a class. Class selectors begin with a dot (period). ID selectors begin with the pound sign.

  Once you have created the style rule and saved your stylesheet, you can position your cursor within the binding to which you want to apply the code. Then right click in the tag in the selector tag at the bottom of the Document window, and then choose Set ID > here on the shortcut menu.

  

• Changing color LED = &gt; reboot of the device!

  Hello

  I use the LED of the unit to indicate a State of enforcement.

  I use the following code:

     private static final int tOn = 1000;   private static final int tOff = 500;
  
     public static void testLED(int rgb){       /*  This does not work on a BB8800 v4.2.1.68 (P.2.3.0.54)        *  It make the device reboot!!        *        * But this work fine on        *   8100 (perle) v4.2.0.67 (p.2.2.0.39)        *   8130 (curve) v4.2.2.175 (p.2.5.0.34)        *        *  compiled with JDE 4.2.1 (simulator indicate 4.2.1.89)        *        * Test made without signing. But problem noticed on a signed version.        */       LED.setState(LED.LED_TYPE_STATUS,LED.STATE_ON);
  
         LED.setColorConfiguration(LED.LED_TYPE_STATUS,tOn, tOff, rgb);   }
  

  This code has to do the device REBOOT on * some * device!

  Is this a bug? I did something hurts?

  Any information will be appreciated.
  Thank you

  Christophe

  Hello

  So, I finally got back my 8800.

  After some tests, I found that my system "led the selection" does not work correctly.

  I guess that
  LED.isPolychromatic (LED. LED_TYPE_TRACKBALL)
  return true on the 8800.

  so, I was using the LED. LED_TYPE_TRACKBALL instead of LED. LED_TYPE_STATUS

  With LED. LED_TYPE_STATUS, it s works well.
  The point that I don't understand: the first test I did was with LED. LED_TYPE_STATUS! but since then, I changed the way I do the .cod. May you have something to do...

  in any case, now it works...
  Thanks for your help,

• How to change email addr linked to the pc

  need to change email as the former has been tampered

  In the application of laptop settings, under the accounts section, you can unplug the old email account and connect a new.

• Changes color when I use the new export or re-export fast in 2015

  Hi, I just upgraded to Photoshop, 2015.  I noticed, that they put the "Save for Web" command as a feature of the legacy, so I tried the new export and re-export fast, but my images accompanying through radically altered color.  (I'm saving to jpg, maximum).  Some examples of what I mean.  However, if I use the legacy, save for the Web or save slot, the color is fine.  Anyone know what is happening with the new export feature?  Thank you.

  

  Wow. Just hours after my last answer, Adobe has released 2015.1 Photoshop, which includes an option convert to sRGB in the export as dialog box. So, if I'm right about the cause of this problem, just update to this new version and you can ignore my previous suggestions. All you have to do in Photoshop 2015.1 is to select the new option convert to sRGB and colors must be consistent when exporting.